How to assign infoobjects to infocube

I am currently working on BI 7.0, implementing xRPM scenarios as given in the
BI Content for SAP xRPM.Of the various scenarios, in Cost and Time Analysis scenario, the Flow diagram shows Infoobject assigned to Infocube
Eg. Infoobject 0RPM_TASK, 0RPM_PROJ assigned to infocube 03.
The BI Content Link is:
http://help.sap.com/saphelp_nw04/helpdata/en/5e/800ebe94d6ea4dbccb269e3f0dada7/frameset.htm
Can anybody please tell me how to assign these infoobjects to infocube

Hi Experts
1. once we have uploaded data with init of delat, can we reinit how? What is ReinitlizatioN, at what circumstances we will go for Reinit? Plz explain with Scenario's?
2 I have a cube using since last 3 years i want to insert new infoobject what i have to do ? (is the cube must be empty to do this?)
3. can we Customize the infoobject plz expalin with scenario ?
4. In my Cube i have some Junk Chars(invalid chars) how to remove it ?
5. 105,106,107 are requests,can we do compression on a particular requst ?

Similar Messages

How to Create Infoobjects,ODS,INFOCUBES & Multi Providers in BI7

Hi,
I want Step by step procedure to Create Infoobjects ,ODS,Infocubes & Mutiprovider in BI7.I Know the procedure for Creating these in BW3.5. So I want to Know the difference with ur Answers
Please help me Regarding this.
Asian Points*****
Thanks,
kiran.
Message was edited by:
kiran manyam

There is no change in creating info objects.
Cubes:
1. Right click the info area and chose create info cube.
2. Select the type of cube you wish to create and comnfirm your selections.
3. The next screen is where you actually define the cube.
4. Now you will notice the difference.
5. Place your cursur on key fig and right click and chose infio object direct input; chose your key fig for the cube.
6. Similarly for the dimension; right click the dimension and chose inbfo object direct input, chose your chars and out them in dimension.
7. Activate the cube.
Multi cube:
1. Right click the info area - chose create multi provider.
2. select the cubes , DSOs, info objects that you need for the multi provider.
3. On the right side of the screen, you will see all the objects that you selected and open the key fig and dimension and drag the ones you need to define the multi provider.
4. Identify the chars and key figs.
5. Acvitate the mullti provider.
Ravi Thothadri
Ravi Thothadri

Problem in assigning Infoobjects to Catalog using BAPI_IBOJ_CHANGE

Hi Gurus,
I am creating infoobjects using BAPI_IOBJ_CREATE and assigning the created infoobjects to a catalog using BAPI_IOBJ_CHANGE.
But, while assign the info objects to a catalog, if the catalog already contains infoobjects they get unassigned, and the data they contained is lost.
Is it possible to assign the infoobjects to a infoobject catalog without affecting the already existing infoobjects in that catalog?
If yes, please mention how it can be done.
I will definitely award points.
Thanks in advance.
Regards,
Akshay.

Hi Dinesh,
Can we assign infoobjects to a catalog using the BAPI_IOBC_CHANGE you have mentioned?
My problem is adding new infoobjects to a catalog without affecting the already existing infoobjects that exist in the catalog.
Thanks for your reply.
Regards,
Akshay.

How to assign numbers in external number range?

Dear experts,
Since NUMBER_GET_NEXT can only be used to assign numbers in internal number range, how to assign numbers in external number range?
So far, I only know the NUMBER_CHECK function module to deal with external number ranges and it only check a number whether it lies in any external number range or not, but it doesn't update any number range status. What I need is a function module like NUMBER_GET_NEXT that supports external number range.
Thanks in advance.
Regards,
Haris
Edited by: harissahlan on Oct 19, 2011 5:44 AM

With external number range, there is no updating of the number range objectt. The only thing you need to know is whether the number you wish to assign is allowed according to the external number range. And also check if there isn't already an object/document with the same number in the database.

How to assign a task to Reuestor in OIM 11g

How to assign a task to a requestor (who has raised a request for other user).
I created a Task assignment adapter and mapped variable in Process definition as
Map To: Request Info
Qualifier: Requester User Login
Still it returns null and default task is assigning to System adminstrator. I am pasting the Task Assignment code here. User key value coming as Null.
Do you have any idea what is the exact mapping required in Process definition.?? Pls note: I am using OIM version 11.1.1.5.0
public class TaskAssignmentToUserAdapter {
     Logger logger = Logger.getLogger("COM.IDM.PROV.COMMON.ADAPTERS");
     public String getTargetType(String targetType){
          return targetType;
     public String assignTaskToUser(String userKey,tcDataProvider dataProvider ){
          System.out.println("The user key value:" +userKey);
          return userKey;
     }

Not sure what sample code I can give you, but you need to do a query in your adapter like:
select REQUEST_KEY from OIU where ORC_KEY='?'
Here ORC_KEY should be mapped to the process instance key.
Once you have the Request key, you can use RequestServcie APIs to get the requester information. http://docs.oracle.com/cd/E14571_01/apirefs.1111/e17334/oracle/iam/request/api/RequestService.html#getBasicRequestData_java_lang_String_
Or if you don't care then get the requester key from the request table. Thus you can have the final query as:
select USR_LOGIN from USR where USR_KEY=(select REQUESTER_KEY from REQUEST where REQUEST_KEY = (select REQUEST_KEY from OIU where ORC_KEY='?'))
HTH,
BB

How to assign an order to a GL account

Hi all,
Can anybody please let me know how to assign an order to the GL account?
Thanks,
S.Sumana.

Hi,
There is no such an assignment. When you post a document, you define your G/L accounts and cost objects. If you want to make a default internal order for certain cost element, you can go to KA02 or OKB9 and define the defaults there.
Regards,
Eli

How to Assign a Constant Value to a Dim. Member when pulling Master Data?

BPC Gurus:
I am trying load Vendor and Customer Master data into BPC dimension. My Dimesnion has memebrs: ID, EVDESCRIPTION, PARENTH1, TYPE. I have successfully pulled the ID and the description from 0CUSTOMER and 0VENDOR. However, I
need to have a ttext value for 'PARENTH1' and 'TYPE'. For Customers, I want to add a FIXED value "'CUSTOMER' for every
Customer ID pulled in and also for "TYPE", I want a value of "CUSTOMER". When I maintainthe Dimension, I want to see
th followingvalues:
ID                          EVDESCRIPTION                                   PARENTH1                         TYPE
0000000001         WALMART                                            CUSTOMER                        CUSTOMER
0000000002          TARGET                                               CUSTOMER                        CUSTOMER
and so ON
Since we have Vendor Numbers in the same Diemsnion, when I pull Vendors, I need to have similar values as:
ID                          EVDESCRIPTION                                   PARENTH1                         TYPE
0000005050         ABC Supply Inc.                                   VENDOR                            VENDOR
0000005051         BASF                                                    VENDOR                            VEDOR
and so ON
How can assign a Fixed value to the member Propert? Can I achieve it in Conversion file....?
( My atempts failed...).
Any suggestion recommendation would be gretaly appreciated.
Munna.

Hi,
For adding fixed values to the properties, you can use the transformation file. In the mapping section, you can specify a constant value. This value will be written to properties of all the members while importing master data. However, for parenth, its a bit different. First thing is that, you need to have a member called CUSTOMER, then only you can have CUSTOMER in the parenth column. Even if you add it and use the mapping section for this purpose, then it will write CUSTOMER to parenth for all the members (even to CUSTOMER member). And this will be wrong. So, you will need to write it manually.
Hope you got the idea.

How to assigne multiple value in key of read table

Hi gurus,
I want read table xxxx with key field1 = ' xxx' or field1 = 'yyy'.
how to assign multiple value as key for the same field while reading internal table.
Regards
sagar

Hi ,
You can loop the internal table like
loop at <table xxxx> where field1 = ' xxx' or field1 = 'yyy'
or you can write two read statements to read the internal table in wrk area.
read table <table xxxx> with key field1 = ' xxx'.
if sy-subrc <>0
read table <table xxxx> with key field1 = 'yyy'.
if sy-subrc = 0
endif.
else.
do your data processing.
endif.
Thans.

How to assign a variable value to crystal report viewer formula with CR2008

Hi ,
I am using crystal reports 2008 and i am not able to find how to assign variable value to crystal report viewer formula.
In CR 8.5 , i used to have crystalreport1.Formulas(0) = variable1
crystalreport1.Formulas(1) = variable2
but, i don't find similar kind in crystal reports 2008.
How can i achieve the same functionality using crystal reports 2008.
Thanks in Advance
Regards,
Ramnath

Hi,
Can i anyone help me out with this.
I am generating crystal reports in vb6 using CR 8.5 and vb6 and below is the code snippet for the same
CrystalReport1.Formulas(0) = "PrintTitle= '" & strMyTitle & "'"
CrystalReport1.Formulas(1) = "FromDate= '" & MskFromDate.Text & "'"
CrystalReport1.Formulas(2) = "ToDate= '" & MskToDate.Text & "'"
Please let me know how the same functionality can be achieved in VB.Net using Crsytal reports 2008
Any code snippet would be of great Help.
Thanks in Adnvance.
Ramnath

How to assign the dynamic value of PV to Sip Header in ICM?

Hi everybody,
I would like to ask your help, please. We are working on Temporary IVR Handoff (ICM+CVP). I need to add/modify a customer Sip header in ICM transfer script. The value for that header is dynamic and stored in the one of ICM Call Peripherial Variables (PV9, for examle).
Is it possible somehow to assign the value of that PV9 to Sip header (Set Variable Call.SipHeader)? I tried to do it but unfortunally without any success. I can assign any static string, but how to assign the value of the PV??? That's the question...
For static string assignment the syntax of the Set Variable Node (Call.SipHeader) looks like that:
"IVR-Handoff~add~It's Cisco"
and it works fine.
For dynamic value (PV9) I tried:
"IVR-Handoff~add~Call.PeripherialVariable9" - it add Call.PeripherialVariable9 as a string, but not it's value;
"IVR-Handoff"~add~Call.PeripherialVariable9 - returns a syntax error;
Call.PeripherialVariable9 - no Sip header is added.
What do you think? Is it doable at all?
Any ideas, answers or examples how to do it would be much appreciated.
Thank you in advance.
Dmitriy.

Hi Senthil,
Yes! It works, but with the little difference. The right answer is:
"IVR-Handoff~add~"&Call.PeripherialVariable9
(Call.PeripherialVariable9 is without quotes, otherwise it insert the name of the variable, but not it's value)
The other solution is shown here (thanks to Paul Tindall):
http://developer.cisco.com/web/cvp/forums/-/message_boards/message/15627744?p_p_auth=6psgR8ML
concatenate("IVR-Handoff~add~",Call.PeripherialVariable9)
Thank you so much for the idea! I very appreciate your help and vote you.

How to assign a dynamic value to the value property of a button ?

Hi Folks,
I have a need, can i know how to assign a dynamic value to the value property of a button. Scenario is like follows...
This is a struts based web application
1. I have a file which consists of login user details (user name and his previlages) for a web application.
2. I got those user details, into a List.
3. When a user logged into the web app, in the home page there are few buttons. The type and number of buttons shown depends on the type of user/ user. (Buttons have different combination and the number of buttons available are not constant, they will vary from user to user).
4. for each button, there will be a different action. I can pass the value of a button to an action class, but here button must have a dynamic value.
Here is my test code:
<%
if (List != null)
for (int i = 0; i <List.length; i++)
%>
<html:submit property="rduname" value= "<%=List%>" onclick="return submitRdu('<%=List[i] %>');"/>
<%
%>
But my problem is how to assign a dynamic value to the value property of the button ( i know 'value= "<%=List[i]%>" ' will not work, just wanted show you guys).
Thanks in advance,
UV
Edited by: UV_Dev on Oct 9, 2008 2:15 PM

Let me try i know am not good at JSP but do we need double quotes here
value= <%=List%>i think JSTL should help you about the dynamic thing

How to Assign a Field value to a Variable??

Dear All,
Kindly let me know, if <b>"HOW TO ASSIGN A FIELD VALUE TO A VARIABLE????"</b>
Situation is, we have a Field (OBJK-TASER) in which 2 tables (SER01 & SER03) are stored. And we want to access names of the Tables which are there in the field(TASER) in (OBJK) table to a variable and then passing that variable to the sql query as a table name to get data accessed dynamicaly.

try this
select TASER from OBJK into table it_table.
loop at it_table.
select field1 field2 from (it_table-table) into table it_fields.
endloop

How to assign a default value to a SelectOneChoice

Hi,
I'm working with ADF 11g: WebLogic 10.3 and JDeveloper 11.1.1.3.0.
I wonder how to assign a default value to a SelectOneChoice.
In a ViewObject I have a field defined as Combo Box. Then drawing the combo in my jspx page:
+<af:selectOneChoice value="#{bindings.Circularidad.inputValue}"+
+label="#{bindings.Circularidad.label}:"+
+required="#{bindings.Circularidad.hints.mandatory}"+
+shortDesc="#{bindings.Circularidad.hints.tooltip}"+
+id="soc2">+
+<f:selectItems value="#{bindings.Circularidad.items}"+
+id="si2"/>+
+</af:selectOneChoice>+
Can anyone help me?
Thanks.

Assume u have an LOV relation associated with VO attribute.
1. Go to Edit List of Values window
2. Click UI Hints tab
3. Check Include no selection item check box.
4. Select Labeled Item ( First of the list) entry form right combo box.
5. Give ur default value in right text box.
Regards,
Dinil Mithra

How to assign chart of account to company code

hi all,
          i am using SAP ECC 6.0
           in my hierarchy , i follow following menu path for assigning company code to chart of account but there is no option there
my menu path is as follows :
Financial Accounting (NEW) -> General Accounting New -> Master Data -> G/L Accounts -> Preparations
   and in sub menu (of Preaprations) following options there :
1) Revise Chart of Accounts (only documentation)
2) Edit Chart of Accounts List
3) Define Account Group
4) Define Retained Earnings Account
also one more hierarchy is ther name as : Additional Activities , but no option for Assignment of company code to Chart of account (COA)
now , how can assign company code to chart of account
plz help
regds
shailesh
Moderator: Please, avoid asking basic questions

Hi,
Financial Accounting (New)-Financial Accounting Global Settings (New)-General Ledger Accounting (New)-Master Data-G/L Accounts-Preparations-Revise Chart of Accounts,Edit Chart of Accounts List,Assign Company Code to Chart of Accounts,Define Account Group,Define Retained Earnings Account
Direct try this Tcode is OB62 or logoff thesap and logon
Regards,
Kanike

How to assign a JSP variabl's value to a JavaScript variable?

Hello,
I want to assign a JSP variable's value to JAVASCRIPT variable.
or how to assign JavaScript variable's value to JSP varialbe
HOw do i do it ?
can anyone please help?
Regards and thanks for your time.
Ashvini

I want to assign a JSP variable's value to
JAVASCRIPT variable.
var jsVariable = <%=someVariable%>;
or how to assign JavaScript variable's value to JSP
varialbeYou can't. JSP is server-side and JavaScript is client-side. The JSP variables are never available on the client side for any sort of assignment.

How to assign infoobjects to infocube

Similar Messages

Maybe you are looking for