How to assign Inspection characteristic to the Phases in Process order
Hi PP/QM experts,
There is business requirement to assign Master Inspection
Characteristics to the Phases in the process order. But there is no
functionality to assign MIC's in process order. So this is stopping me to map the scenario for Rework execution.
Requirement is results recording is required for additional added phases (Phases added to the process order to perform Rework) in the process order.
Expecting to provide a possitive solution to resolve this issue.
thanks®ards,
Hima
hi hima
there may be one solution that if you maintained separate master recipe for rework and maintained inspection characteristics there.and while creating rework order assign that master recipe. that would help you to result record.
and one more solution is that you have to maintained inspection characteristics for your rework phase in the master recipe.
if any query please come back
Regards
Pravin
Edited by: pravin dhokey on Jan 15, 2009 10:01 AM
Similar Messages
-
How to assign Profit segment to the G/L account
hi all,
have anyone know how to assign Profit segment to the G/L account?
rgds,
WorachedHi,
Select the
1. Field Status Group for Profitability segment (T.Code : OBC4)
2. Select the automatic account assignment (T.Code : OKB9)
3. Select the PA Transfer Strcuture , direct posting from FI and MM.
Hope this helps. Please assign points as way of thanks.
Thanks
Lakshmi Narayana -
Question: How to assign number ranges to the Official Excise Document Numbe
Question: How to assign number ranges to the Official Excise Document Number
Field name is: EXNUM, table name: J_1IEXCHDR
SAP CIN
Dear expert,
I will briefly explain the scenario:
I have created return po.
Process MIGO w.r.t. return PO- Material document generated.
Process: J1IS - excise invoice other movement create.
--> Now I want to print the document --> I m trying with T-code J1IP --> entered all the required data --. Used out put type - J1I0
But I am not getting the list of document for printing and even print is not coming.
There is no print document getting for a printing.
When I checked in an above said table (mentioned in question), I found that for transaction type OTHR, there is no number ranges defined for official document no.
And because of this reason I m not getting any document in the print.
Can you Pl extend Ur help and Pl suggest me where (path or transaction) the number ranges can be maintained for the official excise document No.
Thanking you all n advance and expecting your earliest response.
Regards
omDear Friend,
J_1IEXCHDR this table stores the all the excise documents created while excise transactions are done ,
for that Goto j1i9 or SNRO in these transaction you maintiane the number ranges for the
J_1IPLA2 PLA part II number range object
J_1IRG1 RG1 Number range object
J_1IRG1_T No. Range for RG1 - Excise group / Material
J_1IRG23A1 RG23A part 1 no. range object
J_1IRG23A2 RG23A part II number range object
J_1IRG23C1 RG23C part I number range object
J_1IRG23C2 RG23C part II number range object
J_1IRG23D Folio Numbers for RG 23D
like these lot of objects are there for them u maintiane the no. ranges
Regards
Pramod -
How to view the characteristics in process order
Hi, How to see the characteristics in process order screen which are assigned in material master classification view. say, created a material and assigned some characteristics in classsification view. for the same material created a process order. like to see those characteristics in process order. is it possible. please advise.
raju
to see this characteristic in the process orden you should go to Header >> CO Classification. If you want to add a characteristic, this should be added to SAP_KKR_CLASS. Characteristics for material (001) are not the same than those for CO Classification (013), so you should develop some special report (we did some special developmet for the printing of order forms )
regards -
The Airplay icon does not show on my Mac Pro, regardless that it is clicked on display. How can I do to see the Airplay Icon in order to connect my apple TV with my Mac Pro?
To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
About AirPlay Mirroring in OS X -
What occurs in the phase of purchase orders management?
In the procurement cycle of a service or material, what occurs in the phase of purchase orders management?
I. The received good quantity is registered by the system and the first part of accounting is made.
II. The invoice supervisor is notified of the good price and quantity variances.
III. The on-line purchase order processing status can be monitored and it is posible to know if the goods or an invoice were received.
Edited by: Arghya_Roy on Jul 13, 2009 5:51 PMDetermination of Requirements: This phase comprises of identification of Material Requirements. This can be based on the user or MRP proper/Demand based approach to inventory control. Purchase Requisitions can be created manually (ME51N) Release (ME54) or can be generated using the System.
Source Determination: This Phase comprises of identification of potential sources of supply. This can be based on past orders, and existing agreements.
Vendor Selection: This Phase comprises of comparison of quotations received from Vendors. The system can check different quotations received from vendors.
Purchase Order Processing: In this phase information is acquired from the Requisition and the Quotation. Purchase Orders can be generated by the system or they can be created manually (ME21N).
Goods Receiving and Inventory Management: The goods receipts number can be obtained by entering the Purchase Order number.
Invoice Verification: Here Invoices are matched -
How do I turn off/on the internal antenna in order to connect an external antenna
MacBook Pro, 10.9.1, Mavericks, retina display --- 2 questions
How do I turn off/on the internal antenna in order to connectand use an external antenna. Second question, I mistakenly installed the wrong driver for the external antenna, How do I uninstall it?Log onto icloud.com on a computer and see if you can turn it off on there.
-
How to give a user just the acess to its order services/affectations ?
Hello experts,
Do you know how to give a user just the acess to its order services/affectations ?
Thanks for your answer,
Best regards,
Alexandre DupontFor order services, contracts and activities set object CRM_ORD_OP as I said.
For Ibase use CRM_IBASE but with this one it is not possible to set authorizations only for own ibases. Maybe there is some other object for ibases.
Also for business partner there is no such authorization object to shown only own partners. You have 2 options. To play with object B_BUPA_GRP but that means you will have to maintain group for each responsible employee. Or you implement logic in badi BADI_CRM_BP_UIU_AUTHORITY. -
Batch number coming automatically at the time of Process order release
Hi All,
I want the system generated batch number for header material to come automatically at the time of process order release.
At present ,the batch number is entered manualy dering process order creation.
Can anyone pls guide abt the settings required for the sameDear,
Define the production scheduling profile CORY then
Auto Batch Creation = 2 On release.
Then assign this to your FG or SFG materials in work scheduling view in material msater MM02. Then create new order and check.
Now for automatic generation i have to set internal number asignment for batches.
Batch will create for movement type say 101 SPROLogistics - GeneralBatch mangment--Creation of New Batches --Define Batch Creation for Goods Movements. so it will have same logic in MM for 101 GR against PO will be internal number range but no effect in SD.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Mar 12, 2010 12:40 PM -
After releasing the order same screen user updating the quantity in process order in sap pp
Hi experts,
After releasing the order in the same screen user updating the quantity in process order in sap pp.
How to control it.
can any help in this regards
Thanking you,
Rishit.Hi Rishit,
You can control it by BAdi WORKORDER_UPDATE method AT_SAVE make error message if there is any change in quantity.
Or you can create Transaction Variant through SHD0 for CO02 and make field Total Qty (CAUFVD-GAMNG) as output only.
Regards,
R.Brahmankar -
System status LKD REL for operation & phases in Process order
Hi Gurus,
We have a process order in which system status for operations & phases is LKD REL due to which user is not able to confirm the process order. The status of process order is REL PRC APNG APRS BASC BCRQ GMPS MACM RESA SETC. One of the user from planning has set the status to LKD due to some artwork changes. Now another user set the status to unlock. Locked status from order status was reset but at operation & phases level the status is still LKD REL & hence order confirmation is not allowed.
I try to again set the status to lock but i am getting message system status LKD is active (ACT 40547870 0010) which is similar to one which we get during order confirmation.Pls. suggest.
Regards
AmitHello Amit
If the status LKD is not set for the order header, this is possibly an inconsistency.
Please open an OSS incident to SAP for further analysis.
BR
Caetano -
Change the resource from process order
Hi All,
I have 60 to 70 process order i want to change the resource of operation 0010 for all the process orders. Is there any transaction i can do the change of resorce from all process order?
satish kapartiwar
Edited by: satish kapartiwar on Jun 20, 2008 11:39 AMHy Satish,
As Mr. Prashobh has said there is only two ways two do the same.
One is change by BDC or LSMW and
Second is by capacity leveling.
One more option is don't change the Resorce in Process orders , but during the Phase Confirmation by Current Confirm Resource.
Regards,
Dhaval
Edited by: Dhaval on Jun 21, 2008 11:43 AM -
Cannot do the confirmation of process order (CORK)
Hi experts,
I entered into CORK tcode I given the Value for Process Order "XXXXXXXXXXX" and performed the enter.
Now I am "Process Order Confirmation Create : Actual Data" screen. Here I selected the the radio button "Final confirmtn and cliced the check box " Clear Reservation" under the Confirmation Type.
Now I am trying to "SAVE" at this moment I am getting the below message i.e indicated in bold letters.
''Error in determining actual costs for order xxxxxxxxxx.''
I confirmed process order status.
Process order has not the status "CSER(costing error)".
COGI has not records for the process order.
Why the error happen I don't know....
Could you please help me to avoid this problem.
Thanks in advance.
Edited by: Satoru Miyagawa on Sep 17, 2010 5:08 AMHi everyone,
Thank you for your help.
I got the solution of the problem I had!!
The cause of problem is that target profit center has locked by master. (check the lock indicator)
Therefore, process order has not costing error when calculated cost in COR2,COR1.
Thank you!
Satoru -
Inspection Characteristic in the material master (Classification)
Dear All,
Please anyone tell me the cycle for maintaining the characteristics in the material master (classification tab) using batch classification.
or give me a link for the same.
regards,
RishabhHi Rishab,
Below links can help you
http://help.sap.com/saphelp_470/helpdata/en/4d/2b8bd043ad11d189410000e829fbbd/content.htm
http://scn.sap.com/thread/1783839
http://help.sap.com/saphelp_470/helpdata/en/2d/350a19448c11d189420000e829fbbd/content.htm
http://scn.sap.com/thread/2046143
http://help.sap.com/saphelp_46c/helpdata/en/2d/350a19448c11d189420000e829fbbd/content.htm
below steps will help
Creation of Batch Class in (CL01)
Assignment of above created classed characteristic to the Batch Class at the time of class creation. (CL01)
Assignment of batch class to material master in classification view. (MM01)
Creation of MIC with reference to above created Class characteristic (QS21)
Creation of inspection plan with above MIC (QP01)
Follow your business process cycle for creation of inspection lot
Result recording and usage decision (QA32)
You can see in MSC2N that batch characteristic will get updated.
Best regards,
Sharat -
How to assign sessionscope variable to the bind variable in Query of VO
Hi all,
I want to know how to assign a sessionscope variable in the binvariable of Query in VO
My sessionscope variable holds the value of currently selected column in the table. eg:empname of the currently selected column which is in empdetails table...
I want display the schemes available for the selected employee in the next table..The schemes are in another table named empschemes which has the empname and empschemes as column
I have created a vo for empschemes table with bind variable 'scheme_bind'..I need to set the sessionscope variable '#{sessionScope.empname}" to the bind variable.
Its urgent,..Pls do reply asap
Thanks in advance
NasrinHI,
You can use
adf.context.sessionScope.get("YourSessionVariable")this code for assigning VO's bind variable value.write this code where you create bind variable and do not forget click on expression radio button.
Rafat
Maybe you are looking for
-
Error while doing cloning!
Hi All, I am trying to do hotbackup cloning and getting this error orap@emgfclone $ perl adcfgclone.pl dbTier /u02/oracle/emaardb/9.2.0/appsutil/EMAAR_emgfclone.xml Enter the APPS password [APPS]: apps Running Rapid Clone with command: perl /u02/orac
-
ABC Indicator field in PM MODULE
Hi gurus, I have a problem. I change a ABC Indicator value of Functional Locations to A via transaction IL02. However, when i get a report with transaction IW38, I dont see A value in ABC Indicator field in some of the Functional Locations. I am sure
-
BDC or BAPI for Transaction IFCU
Is it possible to do a BDC for transaction IFCU.IF not is there a Bapi to put the measurment documents for an equipment
-
How do i make my canoscan 4400f work with adobe photoshop CC
The problem i'm having is that it will find the scanner and will give me the simple scanning mode from the plate, but it will not give me any access to the advanced scanning functions and to the negative scanner part of it. I've tried updating the d
-
CSoap Excep Transport Http receive failed with Excp Commc_failure(100.101)
Hi Experts; Am working with adobe forms. T-code SFP (Form Builder) I have created a adobe form, Layout and all... when i Activate the Form, it's not Activating and it's showing the Status information like... Status Information: SOAP Framework error: