How to assign more system memory in PE 10?

PE10 has crashed a number of times and will not allow use of Ken Burns.  Searches retrieved information on how to assign more system memory in previous versions of PE, but the methodology explained could not be used for PE10 as the relevant actions could not be located.
What worked in a previous version of PE:
> Edit > Preferences > General
In addition, the guidance suggested 1.5 should be enough but if the recommended amount for PE10 should be different (particularly for Ken Burns), advice would be most welcome.
Thank you.

Welcome to the forum.
What are the complete specs. of your computer, including the OS?
For the Still Images, this ARTICLE goes into much more detail.
Also, for a PC, after one gets past the initial "checklist," in this ARTICLE, there are many links on setting up one's computer for a video-editing session, and for tweaking one's OS for max results.
Good luck,
Hunt

Similar Messages

  • How to assign more than one inter-company customer?

    Hi
    I'm new to Inter-company sales process. Recently I configured and tested the inter-company sales process in the system and is working perfectly.
    My Question:  How can we assign more than one customer as inter-company customers to a sales organisation? In the standard process we are only able to assign one customer at a time as inter-company customer. Could you guide why this is?Does any one ever got such a requirement in project?
    Regards
    Sanjay

    Dear Reazuddin,
    This is my client requirement. (Detail Missing in the question:: 7 Companies, 4 sales organisations, 6 Plants/facilities.)( It is involved in a lot of intercomany transactions. It wants its customers from its sales territories to be able to place order from the sales org. under that territory.)  I do not know why does SAP not allow us to assign more than one inter-company customer?
    Regards
    Sanjeev
    Edited by: winhearts kr on Nov 22, 2010 4:14 AM

  • How to Assign Logical System to a Client in SALE Transaction

    Hi ABAP/EDI Specialists,
    1How to Assign Logical System to a Client. In the SALE transaction window.
    I didn't see any Receiving and Sending Systems(Tree). But I can see Logical Systems. In the Definition and Assign Subtree are there. I created two Logical Systems STUD_S and STUD_R. When I executed Assign Logical Systems. I got a window, Where I can see a list of Clients. I got confused, how to Assign those Two Logical Systems to Client 800 and 810. Finally I double Clicked on each client and in the next window. I changed the Logical System to STUD_S for Client 800 and Logical System STUD_R for client 810. and saved them.
    Is this procedure correct???
    Why I need this is, While generating partner profiles in ALE Model (BD64), I am getting no list at all. When I executed I got no list.
    "No messages have been defined for the selection conditions in the Model"
    I got struck at this point.
    Please help me to come out of it.
    Thanks,
    Chinna

    Hi Chinna,
    Thanks for such a valuable information. I am able to move further. But i got struck while generating parntner profiles from ALE distribution model.
    Log For Partner Profile Generation:
    Partner:
    Partner ZVK_SS_800 as partner has been Created ( Sending System)
    Partner ZVK_SS_820 as partner has been Created (Receiving System)
    Port:
    Port Cloud not be Created
    RFC destination ZVK_SS_820 not specified for system ZVK_SS_820
    Enter the RFC destination and Restart the generation
    It is not recognizing the RFC port, even though i followed all the steps correctly.
    While creating RFC destination, can someone tell me How to fix the above error and what is the Client No, Username and Pasword i have to give.
    Thanks
    Chinna
    Edited by: Chinna on Jun 6, 2008 7:43 PM

  • How to assign a system to a solution for EWA in SAP Solution Manager 7.1 Solman 7.1

    Hello Dear experts,
    I am trying to create and generate an EWA Early Watch report, I am configuring a Solution Manager 7.1 since scratch and now I am in the Managed System configuration - Early Watch Alert Management.
    I know that in order to get the report the system have to appear in the systems and it has to be assigned to a solution but there is not appearing..
    Maybe there is some step that I missed and I have to configure but I don't know which one.
    Below you can find screenshot of my issue.
    I appreciate your help,
    Thank You
    Javier Tenorio

    Hi Javier,
    Please follow the below steps to create solution and assigned to systems.
    First assigned the logical system properly.
    Execute transaction "SOLMAN_WORKCENTER", click on the tab "Solution Manager Administration", and click on "Solutions" on the left of the screen. In the "Solutions" tab, click on the "New" button to create a new solution.
    A window will show up. Enter a name for the solution and select a language and click on "Save Solution"
    assigned the system to solution which you have created.
    Hope this will solve your problem.
    Regards,
    Gurpal

  • How to assign automatically system id in Quality Server (portal - transport

    In the development environment we have ECC and CRM/EP server and in Quality we have only one server ECC/EP. Portal is working fine in development server(CRM). I have imported transport package from Development Server to Quality server successfully using transport package (Import/Export). But in QAS. only links are displayed. When I click getting exception error. Then I changed system name of QAS for few static pages.
    In case of  iviews in the QAS, Systen name parameter has the Development server system ID(e.g. ECC_DEV_100, CRM_DEV_100.) Is it possible to assign QAS system name (ECC_QAS_300) to iviews in Quality Server. For few static pages I have manually assigned QAS system ID ECC_QAS_300 in Iviews. but still getting exception server.

    Hello,
    what you call system name has to be the system alias, and this alias has to be the same between DEV/QUAL/PROD environment.
    Your portal application will look for data/BAPIs/etc... with this alias. Your portal application will know on which environment it has to retrieve data/BAPIs/etc... will be defined in each system object you have defined for each environment.
    Fabien.

  • How can I perform system memory test

    I am working on Labview 7.1. Is Are there any canned vi's that allows me to do basic memory tests as part of my application?

    There are no "canned" / "shrink wrapped" memory tests.
    There are many varieties of memory tests.  Can you describe what you are trying to do?
    Is it for a target device?  A PC?
    What does the memory test consist of?  walking 1's & 0's? To what extent do you want to test?  How large is the memory?
    You need to describe the specs on the memory test that you need to implement.
    R

  • System Memory Errors

    I've recently begun getting "Out of System Memory" messages with all my active applications Paused.  What is causing this?  How can I increase System Memory.  (Note, it doesn't say "Application Memory") ?????

    Contact apple software support directly - it may be a bug in Mavericks or a system setting for surfing the net (based on the more like this -10.9.3 out of memory) is not set correctly to allow for what you are doing).
    If no one contacted Apple on this they would be unaware there is a problem.

  • Is my system DV7t-3300, or DV7t Quad Edition? And how to add more memory to it?

    Dear forum,
    I have an old notebook computer bought back in March 2010. It's a DV7t series. As it's getting slowly, I'm thinking of adding more memory. However, I'm not sure how much memory the motherboard can support for the upgrade.
    I'm stuck with the first step, which is to decide the model number (and then motherboard) of it.
    My original order email states the following:
    YOUR CUSTOMIZED HP PC
    dv7t quad edition
    • Genuine Windows 7 Home Premium 64-bit
    • Intel(R) Core(TM) i7-720QM Quad Core processor (1.6GHz, 6MB L3 Cache) with Turbo Boost up to 2.8 GHz
    • FREE Upgrade to 4GB DDR3 System Memory (2 Dimm) from 3GB DDR3 System Memory (2 Dimm)
    • 500GB 7200RPM SATA Hard Drive with HP ProtectSmart Hard Drive Protection
    • 1GB Nvidia GeForce GT 320M - For i7-720QM and i7-820QM Processors
    • 17.3" diagonal HD+ High-Definition HP LED BrightView Widescreen Display (1600 x 900)
    • LightScribe SuperMulti 8X DVD+/-RW with Double Layer Support
    • Webcam Only
    • Intel Wireless-N Card with Bluetooth
    • HP Integrated HDTV Hybrid Tuner
    • HP Color Matching Keyboard
    • 8 Cell Lithium Ion Battery
    • No Modem
    • Microsoft(R) Works 9.0
    • HP Home & Home Office Store in-box envelope
    However, the bottom of the notebook computer has a label that specifies the following:
    Pavillion dv7
    Serial: omitted
    Product: WH764AV
    Model: Q dv7t-3300.
    I visited some memory buying website like 'crucial.com'. However, I was prompted to select the model and there were both dv7t-3300 CTO and dv7t Quad Edition. Unfortunately, they resulted in different kinds of memory (although the specs of the sugested memory modules seem to be the same, these two memory modules have different model numbers).
    So, what model number my system has? 3300 CTO or Quad Edition?
    Perhaps a suitable model number would tell me which motherboard this notebook has. Additionally, can anyone advice me about on how much memory my notebook can support (8GB or 16GB) maximum?
    Thanks a lot!
    Cruiser

    Hi,
    Max is 8Gb using the following manual:
        http://h10032.www1.hp.com/ctg/Manual/c01859666.pdf
    And from the following site:
       https://www.ramcity.com.au/upgrade/hp-compaq/pavilion-dv7-series-notebook/dv7t-3300-cto/73893
    The above manual shows you how to add/replace RAM. Looks like you have to buy 2 x 4Gb sticks.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have 1 GB RAM on an '07 MacBook Pro. 1) How do I check remaining memory? 2) I have Microsoft office 2004 - do I need to buy more RAM to upgrade to '11? 3) I need a new battery ... Is it worth the $$ to buy a new battery, RAM and Microsoft office 2011?

    I have a MacBook Pro from '07 with 1 GB of memory. The battery is shot and my AppleCare has run out. I just upgraded the OS to 10.6.8. But a few questions:
    1 - How do I even check how much memory I have left on this computer?
    2 - How do I check how many battery cycles are left?
    3 - I want to upgrade to Microsoft Office '11 because I don't have Adobe Acrobat to creat pdf's and I need to be able to do this for school... Instead of buying acrobat, I figured I would just upgrade to Office '11 because I can generate pdf's from Word. Roughly how much RAM does Office '11 take up?
    4 - Does Apple still make batteries for this computer (from '07)? How much do they cost?
    5 - How much does 1 more GB of memory cost?
    AND lastly -- is it even worth it to spend the $ on more RAM, a new battery and Office '11?
    Or does it make more sense to just get a new computer entirely? (trying to avoid this).
    ANY help would be sooo appreciated! Thanks.

    1 - How do I even check how much memory I have left on this computer?
    If you're asking how to check to see if you need more RAM, open Activity Monitor and go to the System Memory tab, then compare page outs and page ins.  If page outs is 10% or more of page ins, you probably need more RAM.
    2 - How do I check how many battery cycles are left?
    There's no limit on the number of battery cycles, it's just that the more cycles you've used the more "worn out" your battery gets.  You've got a 4-year-old machine, and if it's still got the original battery, it's probably about time for a replacement battery.  You can check battery health using System Profiler...  look at the Power section under Hardware.
    3 - I want to upgrade to Microsoft Office '11 because I don't have Adobe Acrobat to creat pdf's and I need to be able to do this for school... Instead of buying acrobat, I figured I would just upgrade to Office '11
    You don't need Office 2011 to create PDFs.  Any application capable of printing can create PDFs on a Mac.  Just choose File -> Print, but instead of clicking the Print button in the print dialog, click the PDF button and choose Save As PDF in the menu that appears.
    4 - Does Apple still make batteries for this computer (from '07)? How much do they cost?
    5 - How much does 1 more GB of memory cost?
    I'll "ditto" sig's answers to these.
    AND lastly -- is it even worth it to spend the $ on more RAM, a new battery and Office '11?
    Or does it make more sense to just get a new computer entirely? (trying to avoid this).
    If Office 2004 is still working fine for you, stick with that and don't incur the costs of Office 2011.  As to the RAM, only add more if the test I mentioned above indicates that you need it.  If you buy more RAM when you don't really need it, you won't see much (if any) performance improvement.  That just leaves the battery...  and if the machine is still doing what you need it to do and you don't really need a new machine for anything, you could definitely buy a new battery and get a few more years out of it. 

  • Intercompany sale - how can i assign , more than 1 sales org of diff compan

    Hi,
    I have
    comp1 - Sales org 1 - plant 1
    comp2 - Sales org 2 - plant 2
    comp3 - Sales org 3 - plant 3.
    Now i want to do Intercompany sale of Sales org2 with plant 1 & Intercompany sale of sales org3 with plant 1.
    For that how can i assign , more than 1 sales org of diff company codes to Plant1 ??
    Does SAP allow to do intercompany sale for more than 1 diff sales orgs ??
    Thanks for immediate response.
    Nitin

    Hi nitin,
    as per your scenario,
    Company code 1 orders goods through its sales organization 1 from Plant 2 belonging to Company code 2.
    It is imperative that both Plants 1 & 2 should have the material. In other words, the material is created for both the Plants 1 & 2 + their respective storage locations.
    Sales Organizations and Plants are uniquely assigned to Company codes. It is not possible to assign either a plant or a sales organization to more than one company code.
    Sales organizations and plants assigned to each other need not belong to the same company code.
    In other terms,
    a plant belonging to Company code 1 & assigned to Sales Organization 1 can also be assigned to Sales Organization 2 of Company Code 2.
    CONFIGURATION SETTINGS
    Assign Delivery Plant of the supplying company code to Sales Org + Distribution channel of the Ordering company code in the Enterprise Structure.
    DEFINE ORDER TYPES FOR INTERCOMPNY BILLING:
    Menu path: IMG/ SD/Billing/Intercompany Billing/Define Order Types for Intercompany billing
    Assign Organizational units by Plant:
    Menu Path: IMG/ SD/Billing/Intercompany Billing/Assign Organizational units by Plant.
    Define Internal Customer Number By Sales Organization:
    Menu Path: IMG/ SD / Billing/ Intercompany Billing/ Define Internal Customer Number By Sales Organization:
    Creating / Showing Ordering Sales Organization as Internal Customer for Supplying Company code:
    Transaction Code: XD01
    The ordering sales organization is represented as Internal customer of Supplying company code.
    We need to create customer master in Account Group - Sold to Party and maintain minimum required financial & Sales Area data.
    This internal customer number has to be assigned to the ordering sales organization. Hence, the system automatically picks up this Internal customer number whenever there is Intercompany billing.
    Thanks,
    Raja

  • How can we assign more than one request group to a responsibility?

    Hi
    Can anyone tell me how we can assign more than one request group to a responsibility?
    Thanks
    SS

    Hi SS,
    Its not possible, rather you should create a combination of Requests/RequestSets and create a new Request Group.
    Regards,
    Kiran

  • Purchased CC for business and can only assign one user. How can I assign more users to have it on all 4 computers in the office?

    Purchased CC for business and can only assign one user. How can I assign more users to have it on all 4 computers in the office?

    Hi there
    You would need to purchase a seat for each user.
    What you currently have is 1 seat = 1 user.
    Kind regards
    Bev

  • Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

    Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

    Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

  • Error:- How to assign Partner Number (KU) in R3 System [Idoc(KU) to File]

    Hi ,
    In Idoc to file Scenario (KU to LS), how to assign Partner numbe (KU) in R3 Sender system.
    I m getting below error:-
    No partner profile (outbound parameter) could be found using the following key:
    Do the needful.
    thanks
    Anshul

    Yes,  I have the partner profile maintained in we20 of type KU
    In We19, it is showing error:-
    No partner profile (outbound parameter) could be found
    For Example- For Logical system it is possible through  SALE

  • How to assign values for more than one field

    Hi,
    I have written following code
    constants: fieldname(30) value '(SAPMF02D)KNA1-AUFSD'.
    constants: fieldname1(30) value '(SAPMF02D)KNA1-LISFD'.
    constants: fieldname2(30) value '(SAPMF02D)KNA1-FAKSD'.
    field-symbols: <L_FIELD>  TYPE ANY.
    field-symbols: <L_FIELD1> TYPE ANY.
    field-symbols: <L_FIELD2> TYPE ANY.
          Assign (fieldname) to <l_field>.
          <L_FIELD> = 'ZB'. " value according to your requirement
          Assign (fieldname1) to <l_field1>.
          <L_FIELD1> = 'ZB'.
    while debugging <l_field1> is not assinging (fieldname1).
    Im able to assing for (fieldname).
    how to assign value for (fieldname1).
    plz suggest me to assign values for more than one field.
    Regards,
    Brahmaji

    Hello,
    Because there is no field name called LISFD in KNA1. Actually you misspelled the field name.
    It is KNA1-LIFSD

Maybe you are looking for