How to Assign Person (Personnel Number) without work Center

Dear All,
How to setup personnel number in order not using general and internal work center in operation service order area?
if i use work center, it make HRD site and payroll will be damage
please help me if you have any solution?
Thanks
Rendra Rizki

dear all,
When i tried to use co11n , the earning appearence :
You want to confirm a network/order of the order type FEN1. However, this order type is allocated to an order category whose confirmation is not intended in this transaction.
You try to confirm a network using a transaction intended for confirming production orders. Since networks and production orders are assigned to different order categories, the system issues an error message.
so i still can't use this tcode, do you have any?
Thx

Similar Messages

Error when assigning the personnel no to work center

Hi,
I have uploaded the HR mini master.Now when I am trying to assign the personnel no to work center it gives me an error as to no objects found. Although I am able to see the list in F4.Checked the validity of both the masters (HR and WC).
Please suugest!
Regards,
Meghana

Hello,
Have you tried to assign personnel number one by one ?
You said you checked the validity for both WC and HR.Did you mean you checked the validity of personnel number you tried to assign ? Also check the relationship period in the pop up screen before F4.
Regards,
Deepak

How to assign a personnel number (HR) to a PS activity

Hello,
I' ve created internal processing activities with allocation to a work center/ activity type for planning resources. Furthermore i'd like to detail a step deeper in allocating personnel number to my activity.
Can you please explain me how i can make appear personnel assignment tab in my activity?
Thanks in advance
Nathalie

In your work-center you must make sure that the scheduling is set to person.
In the screen capacities, you will need a formula. I normally use SAP008.
In the same screeen, the capacity must be 002, person
In the capacities, you will then find the link to HRMS.
I hope this was helpful to you.
Regards,
Berit Eide

Assigning a personnel number (PERNR) to a network - CN21/22

Hello guys,
I would like to know how to assign a personnel number to a network. I have been able to do it on the person assignment tab in an activity but the field PERNR in AFVC table is blank? Is this the correct way to assign a personnel number to a network? How the field PERNR in AFVC table should get fill for a network?
Thanks and regards,
Ally

Hello Yahsaar,
Agree with Sudhakar & Panagiotis.
Person assignment needs to be done in Internal Activities created under Network. Ensure that appropriate Work center is maintained in internal Activity.
Then in Work Center, go to HR assignment and do the assignment of Person's position number in it.
Hope this helps.
Regards
Tushar

While creation of a equipment and assignment of personnel number

Hi
I have activated partner function to the Equipment catagery.
While creating equipment using T.code IE01, I am assigning personnel number to the person responsible partnerfunction.
After that personnel number getting defaulted to operator field as per config setting.
I can create equipment and assign person responsible succussfully.
But at the time of assignment of personnel number with partner function person responsible, I am getting information messege always like
" No customer master record exists for customer 10003511"
I would request you please suggest how to "delink the above message" while creation of a new equipment and assigning the personnel number.
Thanks & Regards
CHSR

Hello
Please check the personal Number is active or exists in HR Master with its validity.Use TC for checking PA20 for checking the same.
Regards,
Rakesh

Org Mgt-How to assign person for positions in bulk

Hi Gurus
Let any one share how to Assign persons to position in bulk manner
i have tried lsmw program but not working properly.using ppom_old it is too difficult to assign for 250 persons.let any one sap hr doctor give me medicine to sort out this issue
with regards
partha

Hi
Very helpful sir
and nicely worked
keep sharing and mould sap aspirants like me
with regards
partha

How can i get a number of working days in a month PL/SQL

How can i get a number of working days in a month(excluding Saturday and Sunday) in a query in PL/SQL ?

Please do a search before posting
sql>
select count(*)
from(
select trunc(sysdate,'month')+rownum-1 dy
from all_objects
where rownum <= last_day(sysdate) - trunc(sysdate,'month')+1)
where to_char(dy,'fmday') not in ('sunday','saturday');
COUNT(*)
23
Message was edited by:
jeneesh
Please try yourself to change the query to one that doesn't use a subquery..

How to reuse deleted personnel number in sap

Dear All.
how to reuse deleted personnel number in sap
please help me
Regards,
Baqar Iqbal

Iqbal
We can reuse the deleted number
Say once u have deleted all the information relaed to the pernr . Go to PA04 in the current no status give the deleted no and hire an employee in PA40
Note : this will applicable only in cretain cased so i would like to know in which context u want this

Assignment of activity group to work center

Hi,
We want to assign activity type to work center more than six,
how we can assign activity type more than six to work center?
i have created activity type group in klh1,
in activity group i have assigned activity type more than six,
How we can assign activity type group in work center?
Regards
Gajjen

HI
It is not possible to assign more tha six actvities to a cost center as per SVK defined in the WC.
Check with the business process field for assign with your CO guy in thw WC.
A business procedure within an enterprise that uses resources and can involve activities from a number of different cost centers in a controlling area.
When executing a business process, activities can be utilized for several cost centers of a controlling area.
Check and revert
Regards
Anupam Sharma

How do I put page number at the center of the bottom of page one and the rest of the page numbers at top right corner?

How do I put page number at the center of the bottom of page one and the rest of the page numbers at top right corner?

Put a section break at the bottom of page 1
Then insert your page number in the footer of page 1.
Go to page 2 and click in the body of the text;
Inspector > Layout > Section > uncheck Use Previous Headers & Footers > click in Header on page > insert > Page Number
Peter

How to track chnages done to a work center in past

Hi all,
How to track chnages done to a work center in past.
I have tried Cr10 t cdoe, when i input plant and kept all other fields blank,and still it is not generating any output.
Am i missing anything,is ther any other tcose or table,pls guide
Thnx
HKR

Hi,
1) You have to activate Change document indicator in the Transaction OP40 for the Workcenter categories.
2) And for what are all the fields you wanted to capture the changes, for those data elements you have to ensure that change document is activated in the data dictionary.
These are the pre-requisite for getting change documnets for the work centers.
Regards,
R.Loganathan

Assign a report to a work center

Dear Experts,
I would like to add a report view to my custom work center. Do you know why this error message appeared? What is the condition for a work center to be used for report assignment?
Many thanks in advance
Cheers
Linh Hoang

Hello Linh,
I would suggest you the following, in order to be able to assign a report to a Work Center View you need to create stable anchors for your WoC view in the UI Designer.
The ReportAssignment-Anchor can be added via UI designer. Plus, the work center view subtype should be "Application".
For even more details, you might refer to help description: Developer Desktop => Analytics => Business and Technical Background => Defining Analytics Content
I hope it helps
Cheers
Tales Caron
Support Engineer

How can I calculate additional number of work porcesses in SAP instance.

Hello Sir,
We have an BW server (SAP NetWeaver 2004s) OS- AIX 64 Bit, Database - Oracle 10.2.0.2 and Memory 20GB. Currently we have the work process distribution as follows,
Dialog - 11
BTC - 8
UPD - 4
UPD2 - 1
ENQ - 1
SPO - 1
Total number of wp is equal to 26.
We are facing performance issue from last few months. All dialog work processes are getting occupied and no new users are getting connection to system. We are thinking to increase number of dialog work processes.
My question is 1. How many work processes I can add more?
2. What is the procedure to calculate number of processes.
3. What memory calculations I need to consider before performing this changes.
You can also suggest any document for reference.
Regards,
Sujit

Hi,
The maximum number of work processes depends on several things like the below.
1) Majorly on Your primary Memory
2) Hardware capacity
3) Operating systems
4) SAP version as well...
You need to calculate the work processes with your primary memory.
Every work process should take 150 mb space on memory.. so you need to increase the work processes that should be campatible with your primary memory.
And please read the OSS notes as suggested by our frnds then go ahead with your rquirement.
-Srini

How to assign a unique number to the name column of a document set?

How can I assign a unique number to the name column of a document set preferably with workflows? (Perhaps this number can increase by one each time a new document set is created)
When a user attempts to create a new document set, this unique number should be already there as the name of the document set.
(However, It seems that access and edit the Name column is more tricky than the other columns)

Hi，
To use document ID instead of Name column, you can
Modify View and hide Name column. Then make Document ID to display at the left column.
By default, document ID will be assigned to both document items and document sets. You may
experience delay before you can see document ID assigned to existing document items and document sets because the scheduled document ID assignment timer jobs haven't finished yet.
Miles LI TechNet Community Support

How do i add personnel number pernr to a hr smartform - appraisals

Hi there,
I am not too knowledgable when it comes to HR smartforms, but i need to add the personnel number to the appraisal smartform HAP_TEMPLATE_01. I'm struggling, please could someone assist and guide me on how this is done,
Would greatly appreciate any feedback,
Regards,
Chantal

First copy the smartform to a Z* name for example ZHAP_TEMPLATE_01.
Start transaction SE19. In the Create Implementation subscreen choose Classic BAdI, BAdI Name HRHAP00_SMARTFORMS, button Create Impl.
On the popup screen enter a name for your impleentation e.g. ZMY_FORM_IMPL and define a filter value e.g. ZMY_FORM_FILTER press ok.
Fill the description of the BAdI implementation, fill a description for the filter value (this will be visible later in the appraisal configuration).
Copy class CL_IM_HRHAP00_SMARTFORMS02 to a Z-class e.g. ZCL_MY_SMARTFORM and activate the class.
In the BAdI implementation on the interface tab replace the Name of the implementing class which was automatically created e.g. ZCL_IN_MY_FORM_IMPL by the name of your class ZCL_MY_SMARTFORM and save the BAdI implementation. You can answer the popup with no as we do not need the automatically created class.
In your Z-class replace the value of the constant C_FORM_10 on the attributes tab by your smartform name ZHAP_TEMPLATE_01. activate the calls.
Activate the BAdI implementation.
Go to transaction oohap_basic. go to enhancement area select AP click enhancement. Enter a new entry and choose your filter value e.g. ZMY_FORM_FILTER from the search help. Save the entry.
Go to phap_cataog / phap_catalog_pa. Add the enhancement e.g. ZMY_FORM_FILTER to the category of your appraisal form. Set the print layout for your appraisal form to the enhancement.

How to Assign Person (Personnel Number) without work Center

Similar Messages

Maybe you are looking for