How to assign PRT in routing
hi,
please tell me how to assign PRT in routing.
Thanks
Parag
hi friend,
for assigning the PRTs in routing go through following ways:-
1. go in TC CF01
2. enter PRT (spanner.hammer,document,etc (only one)
3.enter
4.save the settings
5.go in routing CA01.
6. click on PRT ( first select the operation to which the PRT is to be assign)
7. click on OTHER
8. fill the requirements
9.enter and save.
hope this solution will solved your problem,
thanks and regards,
sachin.
Similar Messages
-
How to assign BOM & Routing to Prod Version.
Dear Frndz,
Pls tell me how to assign BOM & Routing to Prod Version.This is to execute the REM flow.
Regards,
SriniHi,
Step1. Create Material MM01
Step2. Create BOM CS01
Step3. Create Rate Routing CA21
Step4. In MM02 for the above material, go to MRP4 View and click on production version pushbutton, and give Version Number and description and the validity dates and rem allowd indicator and then double click on the version line, it will take u to another screen, there you Select rate routing and assign the group & group counter in Planning Data and then in BOM Data u enter Alt BOM & BOM Usage details. For rem tick on REM Allowed check box and then click on Check, if all the assignment is OK then it will give you a message saying BOM & ROUTING available. Save the material master.
Regards
Vinod -
How to Setup a Second Router (WRT310N)
I have two WRT310N routers. I am setting up the second one to extend the wireless range.
IMPORTANT: THE SECOND ROUTER IS PLUGGED INTO THE LAN VIA ETHERNET CABLE PLUGGED INTO THE INTERNET JACK ON THE ROUTER.
The IP of the first router is set to 192.168.1.2. I can connect to it and get to the Internet via wireless.
The second router is 192.168.1.1. I can see both SSIDs for each router. However if I connect to the second router I can't get to the Internet since the Internet port is connected to the LAN, not the Cable Modem.
Should I be able to setup the second router to use the first router as the Internet connection?
For Internet Setup I selected Static IP. IP Address 192.168.1.106 (this is the IP the first router assigned it).
Subnet 255.255.255.0
Default gateway 192.168.1.2 (the IP of the first router)
DNS - I looked up the DNS addresses that my provider is assigning and types those in.
Network Setup
IP Address 192.168.1.1
Subnet 255.255.255.0
DHCP Server Enabled - but I changed the range to start at 200 instead of 100 so it won't conflict with the other router.
When I try to save I get "The Router IP address equals to the subnet address"
What am I doing wrong? Is it possible to setup a second access point when the second router is hardwired to the LAN? Or do I need to install DD-WRT firmware?
I'm rusty on my network stuff. Thanks in advance for any help.I think I figured some of this out since your post. Thanks much. I found a post on the Internet that said to 1) set SSID on second router to same as the first, 2) disable DHCP on the second router.
Works great. This is with the second router LAN connection plugged into the LAN port, not the Ethernet port. I've got a device that has to get access to the LAN which is now plugged into the second router instead of the wall jack. I almost thought I was going to need to add a hub so I could split the wall jack between the wireless router and the media device. But the question is, how can I tell which router I'm currently using for wireless when the SSIDs are the same. The area I was having trouble getting connectivity to the first router because of the distance, now I get connectivity, but when I had separate SSIDs the other day I noticed for some reason I was able to connect to the first router anyway.
I suppose I could just unplug the second router and see if I lose a connection. I'm running Windows 7. Does the client wireless card just automatically connect to the router with the strongest single when the SSIDs are the same?
I suppose if I am getting a decent connection on my deck now, I shouldn't worry which router I'm connecting to, but I would like to confirm if the $50 I invested was even necessary now. Guess I should go unplug the second router and see if the connection strength changes or drops. -
How to assign drop down list in XML form to properties
Hi ALL,
When i was creating <b>Edit form</b> in XML Forms Builder,for <b>Bulletin Board</b> Application, i had to assign two drop down list boxes to properties created under Content Management Configuration > Global Services > Property Metadata. Can any one help me how to ASSIGN it or provide any related documents.
Suitable replies will be rewarded, for sure.
Regards,
ShankarHi Shankar
Please have a look at this document, especially the part about the cookbook. It explains how to add properties in a dropdown list to your XML form.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee639033-0801-0010-0883-b2c76b18583a
Good Luck!
Barry -
How to assign roles to portal please describe
how to assign roles to portal please describe
Hi Deba,
If you are talking about assigning roles to users .
Then follow these steps :
http://help.sap.com/saphelp_nw70/helpdata/EN/ed/845890b89711d5993900508b6b8b11/frameset.htm
Create Workset and Roles :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9f2df6f9-0701-0010-d08f-a95acdd86453
For creating users,
Go to user administration( You should have this role assigned to you) and create a user.
Cheers,
Sandeep Tudumu -
HOW TO LOG IN INTO ROUTER SETTINGS FROM YOUR COMPU...
Hello there,
I am in need of help!
I am a mac user, and experiening severe wireless prblemns with my router. I came across this discussion on apple support: https://discussions.apple.com/message/23693056
and like in this forum:
https://community.bt.com/t5/Other-Broadband-Queries/No-802-11-Ac-on-Home-Hub-5/td-p/1067592
They suggest setting the router to: No 802.11 Ac on Home Hub 5.
Now, I know what I need to do, but how do it do it?!
I don't know even how to log into my router! Can you help?
Your help with be very much aprreciated. Thank you very much,
regards,
Jennyjennylee wrote:
Thank you so much for your help!
I managed to log in, and it all seems in order. so the problem must be with my computer.
when i go to the tab of the wireless it just says: "Wi-fi: Looking for Networks" all the time!
Then it find a networks, then it drops, then it finds it again. it's a pain. I think it has gotten worse since I uptated the system from Snow Leopard to Maverick. Any suggestions? Anyone else with this problem?
Thank you so much!
Jessy
Hi there,
It sounds to me like you could have a corrupt network preferences file.
Here's what I suggest you do:
1. Open System preferences from the dock icon.
2. Navigate to Network and open that pane.
3. Click on Wi-Fi, in the left hand pane and highlight it.
4. Click the minus button at the bottom of the pane to remove Wi-Fi from the list.
5. Click Apply.
6. Click on the plus button and select "Wi-Fi" from the drop down list.
7. Click Apply.
8. Quit System preferences.
You should now have effectively reset your Wi-Fi interface. Now try connecting to your wireless network again and (hopefully) everything should work as expected.
I hope this info helps. -
How to assign numbers in external number range?
Dear experts,
Since NUMBER_GET_NEXT can only be used to assign numbers in internal number range, how to assign numbers in external number range?
So far, I only know the NUMBER_CHECK function module to deal with external number ranges and it only check a number whether it lies in any external number range or not, but it doesn't update any number range status. What I need is a function module like NUMBER_GET_NEXT that supports external number range.
Thanks in advance.
Regards,
Haris
Edited by: harissahlan on Oct 19, 2011 5:44 AMWith external number range, there is no updating of the number range objectt. The only thing you need to know is whether the number you wish to assign is allowed according to the external number range. And also check if there isn't already an object/document with the same number in the database.
-
How to assign a task to Reuestor in OIM 11g
How to assign a task to a requestor (who has raised a request for other user).
I created a Task assignment adapter and mapped variable in Process definition as
Map To: Request Info
Qualifier: Requester User Login
Still it returns null and default task is assigning to System adminstrator. I am pasting the Task Assignment code here. User key value coming as Null.
Do you have any idea what is the exact mapping required in Process definition.?? Pls note: I am using OIM version 11.1.1.5.0
public class TaskAssignmentToUserAdapter {
Logger logger = Logger.getLogger("COM.IDM.PROV.COMMON.ADAPTERS");
public String getTargetType(String targetType){
return targetType;
public String assignTaskToUser(String userKey,tcDataProvider dataProvider ){
System.out.println("The user key value:" +userKey);
return userKey;
}Not sure what sample code I can give you, but you need to do a query in your adapter like:
select REQUEST_KEY from OIU where ORC_KEY='?'
Here ORC_KEY should be mapped to the process instance key.
Once you have the Request key, you can use RequestServcie APIs to get the requester information. http://docs.oracle.com/cd/E14571_01/apirefs.1111/e17334/oracle/iam/request/api/RequestService.html#getBasicRequestData_java_lang_String_
Or if you don't care then get the requester key from the request table. Thus you can have the final query as:
select USR_LOGIN from USR where USR_KEY=(select REQUESTER_KEY from REQUEST where REQUEST_KEY = (select REQUEST_KEY from OIU where ORC_KEY='?'))
HTH,
BB -
How to assign an order to a GL account
Hi all,
Can anybody please let me know how to assign an order to the GL account?
Thanks,
S.Sumana.Hi,
There is no such an assignment. When you post a document, you define your G/L accounts and cost objects. If you want to make a default internal order for certain cost element, you can go to KA02 or OKB9 and define the defaults there.
Regards,
Eli -
How to Assign a Constant Value to a Dim. Member when pulling Master Data?
BPC Gurus:
I am trying load Vendor and Customer Master data into BPC dimension. My Dimesnion has memebrs: ID, EVDESCRIPTION, PARENTH1, TYPE. I have successfully pulled the ID and the description from 0CUSTOMER and 0VENDOR. However, I
need to have a ttext value for 'PARENTH1' and 'TYPE'. For Customers, I want to add a FIXED value "'CUSTOMER' for every
Customer ID pulled in and also for "TYPE", I want a value of "CUSTOMER". When I maintainthe Dimension, I want to see
th followingvalues:
ID EVDESCRIPTION PARENTH1 TYPE
0000000001 WALMART CUSTOMER CUSTOMER
0000000002 TARGET CUSTOMER CUSTOMER
and so ON
Since we have Vendor Numbers in the same Diemsnion, when I pull Vendors, I need to have similar values as:
ID EVDESCRIPTION PARENTH1 TYPE
0000005050 ABC Supply Inc. VENDOR VENDOR
0000005051 BASF VENDOR VEDOR
and so ON
How can assign a Fixed value to the member Propert? Can I achieve it in Conversion file....?
( My atempts failed...).
Any suggestion recommendation would be gretaly appreciated.
Munna.Hi,
For adding fixed values to the properties, you can use the transformation file. In the mapping section, you can specify a constant value. This value will be written to properties of all the members while importing master data. However, for parenth, its a bit different. First thing is that, you need to have a member called CUSTOMER, then only you can have CUSTOMER in the parenth column. Even if you add it and use the mapping section for this purpose, then it will write CUSTOMER to parenth for all the members (even to CUSTOMER member). And this will be wrong. So, you will need to write it manually.
Hope you got the idea. -
How to assigne multiple value in key of read table
Hi gurus,
I want read table xxxx with key field1 = ' xxx' or field1 = 'yyy'.
how to assign multiple value as key for the same field while reading internal table.
Regards
sagarHi ,
You can loop the internal table like
loop at <table xxxx> where field1 = ' xxx' or field1 = 'yyy'
or you can write two read statements to read the internal table in wrk area.
read table <table xxxx> with key field1 = ' xxx'.
if sy-subrc <>0
read table <table xxxx> with key field1 = 'yyy'.
if sy-subrc = 0
endif.
else.
do your data processing.
endif.
Thans. -
How to assign a variable value to crystal report viewer formula with CR2008
Hi ,
I am using crystal reports 2008 and i am not able to find how to assign variable value to crystal report viewer formula.
In CR 8.5 , i used to have crystalreport1.Formulas(0) = variable1
crystalreport1.Formulas(1) = variable2
but, i don't find similar kind in crystal reports 2008.
How can i achieve the same functionality using crystal reports 2008.
Thanks in Advance
Regards,
RamnathHi,
Can i anyone help me out with this.
I am generating crystal reports in vb6 using CR 8.5 and vb6 and below is the code snippet for the same
CrystalReport1.Formulas(0) = "PrintTitle= '" & strMyTitle & "'"
CrystalReport1.Formulas(1) = "FromDate= '" & MskFromDate.Text & "'"
CrystalReport1.Formulas(2) = "ToDate= '" & MskToDate.Text & "'"
Please let me know how the same functionality can be achieved in VB.Net using Crsytal reports 2008
Any code snippet would be of great Help.
Thanks in Adnvance.
Ramnath -
How to assign the dynamic value of PV to Sip Header in ICM?
Hi everybody,
I would like to ask your help, please. We are working on Temporary IVR Handoff (ICM+CVP). I need to add/modify a customer Sip header in ICM transfer script. The value for that header is dynamic and stored in the one of ICM Call Peripherial Variables (PV9, for examle).
Is it possible somehow to assign the value of that PV9 to Sip header (Set Variable Call.SipHeader)? I tried to do it but unfortunally without any success. I can assign any static string, but how to assign the value of the PV??? That's the question...
For static string assignment the syntax of the Set Variable Node (Call.SipHeader) looks like that:
"IVR-Handoff~add~It's Cisco"
and it works fine.
For dynamic value (PV9) I tried:
"IVR-Handoff~add~Call.PeripherialVariable9" - it add Call.PeripherialVariable9 as a string, but not it's value;
"IVR-Handoff"~add~Call.PeripherialVariable9 - returns a syntax error;
Call.PeripherialVariable9 - no Sip header is added.
What do you think? Is it doable at all?
Any ideas, answers or examples how to do it would be much appreciated.
Thank you in advance.
Dmitriy.Hi Senthil,
Yes! It works, but with the little difference. The right answer is:
"IVR-Handoff~add~"&Call.PeripherialVariable9
(Call.PeripherialVariable9 is without quotes, otherwise it insert the name of the variable, but not it's value)
The other solution is shown here (thanks to Paul Tindall):
http://developer.cisco.com/web/cvp/forums/-/message_boards/message/15627744?p_p_auth=6psgR8ML
concatenate("IVR-Handoff~add~",Call.PeripherialVariable9)
Thank you so much for the idea! I very appreciate your help and vote you. -
How to assign a dynamic value to the value property of a button ?
Hi Folks,
I have a need, can i know how to assign a dynamic value to the value property of a button. Scenario is like follows...
This is a struts based web application
1. I have a file which consists of login user details (user name and his previlages) for a web application.
2. I got those user details, into a List.
3. When a user logged into the web app, in the home page there are few buttons. The type and number of buttons shown depends on the type of user/ user. (Buttons have different combination and the number of buttons available are not constant, they will vary from user to user).
4. for each button, there will be a different action. I can pass the value of a button to an action class, but here button must have a dynamic value.
Here is my test code:
<%
if (List != null)
for (int i = 0; i <List.length; i++)
%>
<html:submit property="rduname" value= "<%=List%>" onclick="return submitRdu('<%=List[i] %>');"/>
<%
%>
But my problem is how to assign a dynamic value to the value property of the button ( i know 'value= "<%=List[i]%>" ' will not work, just wanted show you guys).
Thanks in advance,
UV
Edited by: UV_Dev on Oct 9, 2008 2:15 PMLet me try i know am not good at JSP but do we need double quotes here
value= <%=List%>i think JSTL should help you about the dynamic thing -
How to Assign a Field value to a Variable??
Dear All,
Kindly let me know, if <b>"HOW TO ASSIGN A FIELD VALUE TO A VARIABLE????"</b>
Situation is, we have a Field (OBJK-TASER) in which 2 tables (SER01 & SER03) are stored. And we want to access names of the Tables which are there in the field(TASER) in (OBJK) table to a variable and then passing that variable to the sql query as a table name to get data accessed dynamicaly.try this
select TASER from OBJK into table it_table.
loop at it_table.
select field1 field2 from (it_table-table) into table it_fields.
endloop
Maybe you are looking for
-
Hi i have recently updated my 1st generation ipod touch to find that it has wiped all my purchased music .My itunes libray is on an old laptop i no longer have . any ideas please
-
Apple's Cards App Delivery times
I sent two cards on the 18th of July, to two different very close addresses overseas. One of them have already arrived a week ago (15 workdays after) , the other hasn't. I want to know if there's some way to track that card, or find out what might ha
-
Dual Windows windows 8 Professional and Windows 8.1
Thanks in advance, I had bought a windows 64 bit I-7 machine ,it had windows 8 basic already installed, which i had updated to windows 8.1 basic, but hyper V is not available on this OS. I have another windows 8 Professional OS which i want to in
-
Motion 3 Bug ****...
I have just been trying to deliver a job, and have been in Motion 3 ****. Firstly when rendering and setting up new preferences for file type and aspect ratio (Animation, 720 x 576 Pal, Motion Blur on), i can't save the preferences. I try to create a
-
Renders fine in DW8, not CS3
Ok, I've got a site where the pages rendered fine in the design view in DW8, but with CS3 the navbar on the left shows shifted to the right. Renders fine in browsers too. That said, I certainly wouldn't rule out that I've done something that's not qu