How to assign Release strategy with new PO type

Hi experts,
I have created new PO type but the same is not mapped with release strategy at the time of raising purchase order.
I have done the following steps :
a ). Creation of new doc type via SPRO > MM > PURCHASING > PO > DEFINE PO TYPE
b).  Edit characterstics in release strategy via path SPRO > MM > PURCHASING > PO > RELEASE PROECURE FOR PO > EDIT CHARACTERSTICS > VALUES  (  MENTION NEW PO TYPE & DESC. HERE )
Still I am unable to find release strategy tab in purchase order. Please help.
Suggestions / Rewards will be highly appreciated.
Regards,
( Rajneesh Gulati )

Hi ,
I dont know how much customisation u have complited ,
But for release strategy
1 Following are the imp charecrticities ct04 you have to define
Order type (Purchasing)
Plant
Total net order value ( with  table &  field)
2.check or create relese group is assighned to appropriate class cl01 (with above charecricities )
3.define relese code ( in this u define release level --supervisor , manager etc)
4.release indicator  (block ,release)
5.define the group with strategy in that specify prerequisites,release status,classification (specify to the document & plant you want to maintain)
6.create po me22.  In me29 you can release it( unless u cant process)
Dev

Similar Messages

  • Release Strategy with New Class and Char.

    Dear All,
    I have facing problem when creating the new release strategy for different country. i have create new Characteristic and class for new Release streategy.
    when i going to add in Release group.. system giving the error.
    Diagnosis
    Here you can assign release groups to release classes. Only one release class should be used within the release groups for overall release and the release groups without overall release in each case. However, in this instance several release classes have been used.
    My existing Characteristic for india :
    ZP0_GNETW     Total net order value     CURR     15     2     INR
    ZPO_BSART     Order type (Purchasing)     CHAR     4     0          
    ZPO_EKORG     Purchasing Organization     CHAR     4     0          
    ZPO_EKGRP     Purchasing group     CHAR     3     0          
    New Characteristic for South africa :
    ZPOSA_BSART     PO Order Type ATSA     CHAR     4     0          
    ZPOSA_EKGRP     Purchasing Group ATSA     CHAR     3     0          
    ZPOSA_EKORG     Purchasing Organization ATSA     CHAR     4     0          
    ZPOSA_GNETW     Total net PO value ATSA     CURR     15     2     ZAR
    ZPOSA_WERKS     Plant     CHAR     4     0          
    Please help me how do configure 2 release strategy for 2 country.
    I will be very thankfull to u.
    Regards,
    Vishal Garg

    HI Biju K,
    I can use exising Characteristic Like Purchasing Organization & Purchasing Group & Plant etc. But in the case of Net order value : ZPO_GNETW Total net PO value for my indian company Currency is INR and for My SA company currency is ZAR. What will i do in that case.
    Please explain..
    And aslo clear the concept of creation of new Characteristic as Company Code & design different release strategies based on company code. How i can do that..??
    Please explain in details.
    I will be highly thankfull to u.
    Regards,
    Vishal Garg
    9810402156

  • PR overall release strategy with acc. assignment category characteristics

    Hi,
    Here is my issue : i created an Overall release strategy but the characteristic is on item level. In some precise cases, no release is generated.
    see below more details :
    I have created the following PR release strategy with classification.
    PR type concerned " NB": overall release
    Rlease group concerned : overall release
    In this release group i have 1 class
    in this class i have 2 characteristics : PR type and Account assignement category.
    Release strategy 1 :
    PR type = NB
    Acc. assignment cat = P, W
    Release strategy 2:
    PR type = NB
    Acc. assignment cat = K, V
    TEST 1 : PR type NB, 1 item with P category
    OK the release strategy 1 is generated
    TEST 2 : PR type NB, 1 item with W category
    OK the release strategy 1 is generated
    TEST 3 : PR type NB, 2 items with P category
    OK the release strategy 1 is generated
    TEST 4 : PR type NB, 2 items with P and W category
    TEST KO, no release strategy is generated
    => what should i do to solve this issue ?
    Thank you in advance for your quick answers,
    Isabelle

    What is the specific requirement for Overall release strategy?
    Besides, once you go for Overall release strategy, you cannot have another release strategy at item level.
    Every line item generates a PO, so logically should be set to a release strategy.
    Bottomline is use release strategy at line item level Unless a specific reason exists.
    Regards,
    Sameer

  • Release Strategy with Workflow for PR & PO

    Hi Experts,
    I have configured the PR & PO Release strategy and it is working fine. My client wants the Workflow concept in Releases.
    So User should get the information about the releases for PR & PO.
    But I don't have much idea on Workflow, how it works for Release strategy. Can anybody give information on how to configure the Release strategy with Workflow in PR & PO.
    Points will be awarded .
    thanks & rgds
    Swamy

    Hi Swamy,
    The release workflow is configured by MM functional consultant. As for the workflow determination (i.e. which level should approve first and so forth) depends solely/mainly on the Finance of the company. It differs from one company to another. And the level of approval also differ from one company to another. Hence, like you mentioned, this would be provided by the user, so it is okay. I have replied to someone on another thread asking about workflow, and this is how it works.
    How it works? For example, for a PR release strategy, once the PR is raised by a user for a certain value, the PR raised that matched the classification of the release strategy configured will be triggered. In this sense, once the release strategy is triggered, the releaser holding the release code to release this PR will receive a workflow in their SAP inbox (Not Outlook) for their execution, which is sent automatically by SAP system. These is accessible via the t-code SBWP. Each releaser have a unique login ID and password.
    Assuming the release strategy required 3 levels of release, for example A3, A2 and finally A1 (final release), A3 will first receive this workflow in his/her inbox. After A3 has released, A2 will subsequently receive workflow in his/her inbox for this same PR. In the PR, you will be able to see that A2 release is now possible. This flow will continue until the final releaser, A1 and then, the status of the PR will be unblocked for issuance of PO.
    How is it configured in SPRO? In the Workflow for PR release strategy, you are able to assign a unique ID (usually employee ID) to a particular release code, which these release codes are tied to one or more release strategies. The workflow determines who is to release for a release strategy with that particular release code via the assignment of the ID to that particular release code. Each assignment is only possible for one Plant, and you have to assign the same for many other Plants for the same ID in the workflow if you want him/her to have the authority to release purchasing docs in more than one Plant.
    How to configure?
    Before that, you need to obtain the following information - User ID of the releaser for the specified release code, Plant to be released by the user, and finally of course the Group and Release code (which you already have).
    For PR: IMG>MM>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>Set Up Procedure with Classification-->Workflow
    For PO: IMG>MM>Purchasing>Purchase Order>Release Procedure for Purchase Orders>Define Release Procedure for Purchase Orders>Workflow.
    Maintain the details u already have in hand:
    For PR: Group (PR or PO), Code (release code), Plant (you have to maintain the same details for each of the Plant that the same release code releases) Object (US) and Agent ID (the user's ID used to login to SAP system and SBWP).
    For PO: Group (PR or PO), Code (release code), Object (US) and Agent ID (the user's ID used to login to SAP system and SBWP).
    Please note that PO is not Plant specific, and is usually one releaser to release the PO for GR. It is the PR that during the initial stage has the most level of release (up to max. 8 level) before a PR can be converted to PO.  After the PO is converted, it is usually deemed accepted, hence only one release code is usually required to release the PO.
    Hope this will give you an idea how the workflow works and how to configure it.
    Rgds.

  • PR release strategy with classification

    As part of a rollout, we are migrating an instance of SAP to the template SAP. Both the SAP instances are following u2018PR release strategy with classificationu2019.
    The limitation is that I can configure only two release group in PR release strategy with classification. One for overall release and one at item level release. Also, I cannot assign two different release class for the same release group. If I add additional characteristics in the existing class and keep other irrelevant characteristics as blank the release strategy doesnu2019t works. the release strategy does not triggers.
    Any pointers to solve this will be highly appreciated.

    Hi Ashish,
    If your requirement is to have release strategy with more or different characteristics than in the existing system,you may create a new release group and assign the same to release class.There no restriction for having multiple release groups for same release class.Then create new release strategies for the newly created release group and so on.
    Regards,
    Edited by: Dayanandan Kamath on Oct 20, 2010 7:52 AM

  • Creating Roles for Purchase Req. release strategy with classification

    Hi friends,
    Since I have created Purchase req rel strategy where I have four release strategy
    1. For Plant 1 When value <= 5000 (Officer) will release , release code 01 release release strategy r1 and rel code L1
    2 For Plant 1 When value >= 5000 (Manager) will release , release code 01 release release strategy r2and rel code L2
    Now the manager will have 2 release code,if  officer is absent he could release the requisition.
    Same has to be done for plant 2
    The release Group and code needs to be assigned to the Roles , could anybody tell  me  where i could know about roles and will be able to create roles and assign authorisation objects to the Roles , and release group and code to the enduser.
    though its a basis job , since I have no idea , I mean I have never worked with Roles ,as now I have created the Release strategy with classification I need to assign authorisation objects to the Roles as I have four release strategy
    1. For Plant 1 lower value of requisition 1 codeL1(Officer)
    2  For higher value of requisition 2 code say Li and L2(Manager)
    Manager should have 2 codes if  officer is absent he could release
    Same has to be done for Plant 2
    Thanks N Regards
    Siddhartha

    Hii,
    Steps:
    1) Create a Role
    2) Add the authorization Object  M_EINK_FRG by taking the manual option
    3) Assign Release Code and Release Grp
    4) Assign the Role to the User ID which has the authorization of the Release Code and Grp.
    Regards,
    Kumar

  • How to assign function module with process code in IDOC ?

    how to assign function module with process code in IDOC ? and what code i have to write in that function module for custom IDOC ?
    helpful answer will be rewarded?

    Hi,
    First goto transaction we42 -->editing mode --> new entries -->give name of your process code and description --> processing with alv service and function module -->then press enter -->after that enter the name of the function module you want to associate from the drop down and save it.
    Thats the way to assign function module with process code.
    In that process code we will have the Function modules and Bapi's which will take the data which we are sending through IDOC and then process it.
    for example: i am triggering the IDOC for every purchase order created then this process code in the receiver system will take the data which i have enetered in the sender system to create the purchase order and process it and creates the same purchase order in the receiver's system.
    Reward if helpful.
    with regards,
    Syed

  • How to do release strategy work flow in MM

    how to do release strategy work flow in MM. for purchase order release how to do release strategy work flow. please give elaberate steps

    1: Install SAP - your IT support team should be able to help you with this
    2: Start the SAP Logon Pad (it is in the Start menu if you use Windows - look around)
    3: Go to transaction SPRO
    4: Navigate the structure, go to materials management, purchasing and then look around
    5: Read the documentation for each activity
    6: Perform the activities
    Seriously, you will be amazed by how much you can learn by actually making an effort.
    PS: I see you <b>expect</b> 10 points for your one-line replies, so this one should be worth at least 50.

  • How do you close programs with new iOS7? Old way doesn't seem to work!

    How do you close programs with new iOS7? Old way doesn't seem to work!

    After double tap home button, swipe up on the app card that appears above the icon.

  • How to use facebook  + skype with new Ipad? it needs flash player it seems...

    how to use facebook + skype with new Ipad? it needs flash player it seems...

    get the facebook and skype apps from the app store and there is no need flash.

  • How to use track effects with new version of GarageBand

    In the version of GarageBand before this one, you could access different effects that you could manage and apply to the different tracks.  Each track had an area containing its set of effects that were either activated or deactivated.  With this removed, i am not sure how to add those same kind of effects.  I am aware of the new nobs that are provided in order to mix and edit trebles, bass, mid, etc., but i want to be able to add different effects such as voice transformer, flanger, chorus, speech enhancer, bit crusher, bass amp, track echo, track reverb, amplifier, etc.  I desperately need help finding out how to do this, as this was a major part of my mixing and producing with GarageBand, and without these given effects, i do not feel as comfortable using GarageBand.

    zachseiden wrote:
    How to use track effects with new version of GarageBand
    this may help:
    http://www.bulletsandbones.com/GB/GBFAQ.html#replacemissingtrackeffectsgbv10
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How to intigrate old APPL_TOP with new Product. R12

    hi All,
    I am upgrading APPS 11.5.10 to R12.
    I am sucessfully upgrade Apps file system and database.
    And R12 services and Database service are running sucessfully.
    But Problem is that i want to use OLD Business Flow means I want all old form and report behiver.
    Means how to intigrate old APPL_TOP with new Product. R12.
    thanks
    c2

    Hi,
    For custom forms and reports, you need to open it using Forms/Reports Builder 10g, compile it, and upload it again to the server.
    For the CUSTOM_TOPs, make sure it is set in the custom<CONTEXT_NAME>.sh file under $APPL_TOP, and in default.env file on the Applications tier.
    Note: 563258.1 - How To Upgrade 11i Custom Forms And Reports To R12
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=563258.1
    Note: 552010.1 - Can't Open Custom Forms After R12 Upgrade
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=552010.1
    Note: 451934.1 - Accessing Custom Forms After Upgrading From To R12
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=451934.1
    Regards,
    Hussein

  • How can I start firefox with new tab instead of blank page?

    Today I update firefox to 13.0. I like the new "new type". I want to konw how can I start firefox with new tab instead of blank page?
    I don't want to change the homepage to about:newtab.
    Sorry for my bad English.

    This is a very annoying thing. Every update from Firefox resets this config setting back to about:newtab. I changed '''''browser.newtab.url''''' in 12.x to '''''about:blank''''' and it resetted back in update 13.0 and now I have to do the same thing again in 13.0.1.
    The drawback with about:newtab is Firefox opens up dataports for every URL that are linked and gets reopened for every lame 'newtab' you click on. Just use [http://technet.microsoft.com/en-us/sysinternals/bb897437.aspx Tcpview - data port viewer] and watch how many extra dataports that opens up from this crazy 'feature'.

  • Tranposrt - Purchase Requisition Release Strategy with Classification

    Gurus!
    Tell me if I want to Transport the Purchase Requisition release strategy with classification. The Data in each charisteristics in each PR Strategy that I have set in Dev is not getting transported to Quality.
    Do I have to enter the data in characteristics again in Quality and the same procedure I have to apply for Production.
    If yes, in this scenario, Can I make Production modifiable.
    Regards
    Sajid

    Hello,
    Create a special ID in PRD with access to change characteristics. This ID should be released for specific purposes and with approval (project manager/SAP support manager). You can also turn on auditing so that all activites performed are logged which can be used to satify auditors.
    Cheers !

  • HT1386 how do I sync manually, with new update it doesn't show option?

    How do I sync manually, with new update it doesn't show the option?

    For iTunes>Help>iTunes Help>Sync you device>Setup syncing
    Sync your device manually
    If you use manual syncing, you can sync items from more than one iTunes library to your iPod. (You can sync iPod touch, iPhone, and iPad with only one iTunes library.)
    You can manually sync music, movies, TV shows, podcasts, and iTunes U lessons. You can’t manually sync photos and info (contacts, calendars, bookmarks, and so on).
    Connect your iPod, iPhone, or iPad to your computer and select your device.
    Click the Summary button and select “Manually manage music and videos” (below Options).
    Click the On This Device button.
    Click Add To on the right side of the iTunes window.
    Drag items from the left side of the iTunes window to the pane on the right. To add other types of content, choose a category from the Library pop-up menu.
    Click Done.
    If you use automatic syncing, you can also add items to your device by dragging. To drag items to an automatically synced device, follow the instructions above, but skip step 2.
    The picture from the iTunes Help do not display.

Maybe you are looking for