How to assign request number to a report painter

hi all
i have to assign a request number to the report that i have created using report painter.
please let me know how to assign a request number.
thank you all in advance.

Hi,
If you are creating new report once you press Create on SE38, it would give you a screen where you enter the program details..
After this You get a Create Object Entry Screen on which you have to deifne Package ... Please don't select package as $TMP as it would not allow you to create request..
Select relevant package and Press Save..
It would give you another screen with blank Request Number..
Please press the Create Button..
The system will create a request Number and display in the request number..
Press Save ..
Hope this helps..

Similar Messages

How to assign t-code to the report painter

Dear expert,
Would like to seek for advice for the step to assign the T-code to report painter.
Kindly advise.
Thank you.
Regards,
Karen
Moderator: Please, search SDN

Hi
1. Create the transaction code,say, ZF01_TCODE from Se93
2. Choose "Transaction with parameters".. Press enter
3. Enter START_REPORT in the Transaction field and press Enter
4. Select the Skip initial screen and Inherit GUI attributes check boxes
5. On the same screen, scroll down to the Default Values table and select parameters D_SREPOVARI-REPORTTYPE and
D_SREPOVARI-REPORT.
6. Enter RW for the report type and your report group ZCC8 as the report value
7. Now you can save your transaction and transport it to other systems
Regards
Ajay M

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

Hi,
First go thourh the FM import export parameters list.
Try to create an internal table of type INRI-NRRANGENR for number ranges.
We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
Try to create the ncessary ones using this FM.
In the Exit, EXIT_SAPMM06E_001,
the Export parameters are-
EKKO-EBELN- the PO ios created with in that specified range
Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
Try to code this in the Include provded and keep Breakpint and check the PO number generated.
Reply if u need more help on this.
Reward if helpful.
Best Wishes,
Chandralekha

Error:- How to assign Partner Number (KU) in R3 System [Idoc(KU) to File]

Hi ,
In Idoc to file Scenario (KU to LS), how to assign Partner numbe (KU) in R3 Sender system.
I m getting below error:-
No partner profile (outbound parameter) could be found using the following key:
Do the needful.
thanks
Anshul

Yes, I have the partner profile maintained in we20 of type KU
In We19, it is showing error:-
No partner profile (outbound parameter) could be found
For Example- For Logical system it is possible through SALE

How to set request number of info package using start routine

Hi All,
I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
Thanks
Sangita

You'll probably want to do this in a start routine. It is probably not advisable to hard-code the technical name of the InfoPak. They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
I would do a SQL select like this in a start routine, and then filter based on the results of the SQL. You'll probably want to sort the results by date and time, both descending. Or do a MAX in the SQL.
Please let me know if this isn't clear.
select q~rnr q~logdpid q~tdatum q~tuzeit
from rsreqdone as q
inner join rsldpio as p
on p~logdpid = q~logdpid
where p~objvers = 'A'
and p~logdpid like 'ZPAK%'
and p~source = 'your data source'

How to create REQUEST NUMBER for STANDARD TEXT (SO10)

how to create REQUEST NUMBER for STANDARD TEXT ( t-cODE SO10)

you can do this using program RSTXTRAN .
Text key - object
Text key - name
Text key - ID
Text key - language, then it will store under one transport that can be moved to other system.
check out the following link.
http://help.sap.com/saphelp_47x200/helpdata/en/f4/b4a1ed453611d189710000e8322d00/frameset.htm

How to find request number of SAP Script's Form

Hi All,
Can anyone tell me how to find out request number of scipt's form
Regards
Shashikant

Hi,
Se03->Search for Object in Requesta/Tasks--->Right Click ->Execute->Add a new entry with check box ticked,FORM,& Form name on the right side-->F8 It will display all the requests pertaining the form you have keyed in.
Regards
Raju Chitale

How to see request number in ODS table

Hello,
I know data last request has some incorrect data (delta , LO).
In order to change it I need to select data by request number. Table /BIC/AXXXXXX00 does not contain request number.
Please tell me how I can select data by request number.
Thanks

Hi
To find the request, goto the table RSMONICTAB in BW. Enter the request number.It'll give you the date time stamp as to when the request was loaded into BW.
Go back to monitor (RSMON) and filter on the date with the date from the table.
You'll find your request.
This may help u.
Regards
Naalla

How to assign Line Number for Lines when click on Add More Lines

Hello All,
Kindly help me to assign line number for the lines which are added through Add More Lines button on an Advance table. If user clicks on the button Add More Lines then there are 5 lines get inserted at a time but I am not able to handle the line number for them.
Similarly, if user delete any of the line then I need to re-order them.
Kindly help and share if there is any sample code.
Thanks,
Sandy

Hi,
Check if this link helps you :
Re: How to display serial numbers in the results table region
--Sushant

How to know request number?

hi,
few days back i saved a query in a request.
now i forgot that request number.
i know description and technical name of the query.
do i have any method to know that request number?

Hi,
If you want to know the TR number,In RSA1 Transport connection,Just select the report and drag dwn the particular report from left side to right side panel.
If the report already it has been released or saved under the request,it will show the Transport request number and package name.
Hope this will help.
Regards
Ashok

How To Assign FSV to Cash Flow Report/Form

I am working on Standard cash flow statement report - S_ALR_87012273/S_ALR_87012272 (can someone also tell me the difference between the two reports). can you please tell me what needs to be configured in order for this report to run and display data. I believe I need to change assign the FSV to Cash Flow form in Report Painter. AmI right, if this is the case where do I assign it. Because the cash flow report that I ran has FSV "INT" not the one which is configured.
Please reply as soon as possible
thanx

Already replied. Try it and revert back
Cheers
V.Krishnan

How to display week number in a report

Hi,
I need to show the week number in a report and related sales data for that week. For example, starting from 01-JUL-2009 the week1 should show total of sales from 01-JUL-08-JUL.
Help please....
Thanks
A/A

If you are trying to extract the week number of the calender year...you can use..
sql> select to_char(sysdate,'WW') from dual;
TO
05and then group the sales figures by week...
sql> create table t(
2     target_date date,
3     sales       number);
Table created.
sql> begin
2     for i in 1..30 loop
3        insert into t values (sysdate-i,100*i);
4     end loop;
5   commit;
6 end;
7 /
PL/SQL procedure successfully completed.
sql> select week, sum(sales) from (
2     select sales, to_char(target_date,'WW') week from t)
3   group by week;
WE SUM(SALES)
05       2100
02      16800
01       8800
04       7000
03      11900However, if your week calculation starts with a particular date like a calender year starting with 01-june-2010, then you would need to calculate the (relative) week number using something like...
1 select target_date,
2         trunc(((target_date - to_date('01-june-2010','DD-MON-YYYY'))/7)) week_number
3*   from t
sql> /In the above code, 01-june-2010 is the date from which my calender year starts.
Please note that since this is relative, you might get negative numbers for weeks.

Profit center group number on the report painter report.

Hi,
We have a client requirement where we have to develop Profit center by Functional Area report by using report painter report functionality, however we are able to bring profit center group description on to the report as per the requirement, but not able to get profit center group number displayed on the report.
Can anyone please advice me if we can get the Profit center group number displayed on the report in Report painter report. Else let me know if we can get the requirement met by an ABAPER.

Hi.
First of all, through transaction GS01 create a set ID for profit centers.
Give table GLPCT, let the set type be the default (basic set) and give field name RPRCTR. Then define the range of profit centers you want. If you want all the profit centers give * in the "from value field".
Then create a variable through transaction GS11. Give table and field as above, choose variable type set and at the default set field choose the set you created.
Finally, at report painter go to Edit/General Data Selection and select profit center.
Check both flags (for entering sets and variables) and give at the form field the variable you've made.
Now the progit center group will be available in the selection screen with default value the set you've made.
Regards

How to Modify the Selection Screen in Report Painter

Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
uma

Hello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
                S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:   S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju

How to create dropdown or checkbox in report painter?

hi experts,
I would like to ask on how to create a dropdown / checkbox in my report painter's selection
screen.
thanks,

Hi,
For check box and list box look at the below example,
TYPE-POOLS: vrm.
DATA: w_param TYPE vrm_id,
      it_values TYPE vrm_values,
      wa_value LIKE LINE OF it_values.
PARAMETERS: p_rec_ty AS LISTBOX VISIBLE LENGTH 10,
            p_check AS CHECKBOX.
AT SELECTION-SCREEN OUTPUT.
w_param = 'P_REC_TY'.
wa_value-key = '1'.
wa_value-text = 'AAAAA'.
APPEND wa_value TO it_values. "Add values like this for the list box
wa_value-key = '2'.
wa_value-text = 'BBBBB'.
APPEND wa_value TO it_values.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = w_param
      values = it_values.
START-OF-SELECTION.
READ TABLE it_values INTO wa_value INDEX p_rec_ty. "Get the value for the particular key
WRITE: wa_value-text , p_check.
Regards,
Maoj Kumar P
Edited by: Manoj Kumar on Feb 6, 2009 10:54 AM

How to assign request number to a report painter

Similar Messages

Maybe you are looking for