How to assign the cost to objects in object list in a PM order ?

Hello,
If there are many equipments in object list in one PM order, how can I assign the cost to every equipment in the order  ?  And how can I query the cost of every equipment in the order?
I have tried to find the threads posted in the past, but I got no idear.
Waiting for your reply. Thanks.

Xifeng Xing
As stated above, when EHP5 arrives it promises operation level costing functionality.
At present this functionality is not available without designing your own reports
PeteA

Similar Messages

  • How to do the cost assignement mandatory in  infotype 0014

    Hi everybody,
    does any of you know how to do the cost assignment mandatory in infotype 0014?
    We have use the feature COBLT  and table T588N for Function Module RP_TIME_COBL_002, and now the field COBL-AUFNR is mandatory, but we need the cost assignment to be mandatory, I mean should be impossible to save a new record without cost assignement. Is is possible using standard functionality or I have to use the user exit in PAI?
    Thanks in advance.
    Cristóbal.

    Hi,
    Instead of user exit, do as below.
    Go to Table using SM30->V_T588M. Give module pool name as MP001400.
    Now check your correct variable key for the feature & click on the corresponding Alternative Screen for e.g. 2010 & now go that field & mark that field as required field by choosing the second radio button.
    Hope this will solve your problem.
    Thanks,
    Sarika.

  • How to assign the budget to maintenance order

    Dear PM Guru's,
    I like to know the how to assign the budget for a maintenance order. how we control the expenses from a maintenance order. suppose for a small work manangement assigns budget as 2lacs. now i like to restrict if any thing purchased once budget reached to 2lacs system should populates the error message to restrict the creation of Purchase orders / material requisitions and some other issues. Please suggest me how i can map in SAP? if any one have full documentatioin regard this please send through mail.
    thanks in advance to all of PM Guru's.
    regards
    Jalu

    Hi,
    There are different approaches for budget control in PM orders.
    1) Option1: In koab transaction maintain commitment managemen active and in budget profile (oioa) you must tick total values ,annual values,activation type should be 1-automatic activated when budget allocation done. Then distribute budget in PM order through KO22.
    2) Option2:You can also opt for Investment management approach but it is mainly done in case of capital work/projects/internal orders. In this approach you need to activate IM for orders(done by CO people). Investment programs are created and budget distributed through IM52. For details you may consult your FICO consulatnt.
    3) Option3: Fund Management approach enables you to monitor budget-relevant plant maintenance processes. enables you to monitor budget-relevant plant maintenance processes in FM.
    The link between the plant maintenance process and FM is established by entering an FM account assignment (commitment item, funds center, and fund) when you create a plant maintenance order.
    You have to enter the FM account assignment manually. If, however, you have maintained the assignments of FM account assignments to CO account assignments, the system determines the FM account assignment from the cost center of the technical object (functional location, equipment) which is assigned to the plant maintenance order.
    FM takes care of budget related processes from creation of maintenance order till settlement.
    Hope this helps you to decide an appropiate approach.
    Regards,
    S.Basu
    Edited by: S Basu on Nov 10, 2011 5:34 PM
    Edited by: S Basu on Nov 10, 2011 5:34 PM

  • How to increase the number of data Business Object can pull for a report?

    Hi,
    I would like to ask around how to increase the number of data Business Object can pull for a report. I have a report which pulls data depending on the date range (ex. From 01/01/2007 - 01/10/2007). But, when the data that is pulled exceeds 5000, the report fails. Is there anyway to increase the number of data that BO can pull?
    Thanks

    Bobby,
       to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
    in order to check the setting in source system  SBIW--> General Settings --> Control Parameters for Data Transfer.
    we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
    All the best.
    Regards,
    Nagesh Ganisetti.

  • How to Make the Cost Center filed Mandatory ?

    While entring the Doc in FI  for Expense A/c, How to Make the Cost Center filed Mandatory?

    Hi,
    Got to field status groups and select cost center field as required field.
    Refer to this documentation
    http://www.sap-basis-abap.com/sapfi012.htm
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    Sridhar M

  • How to bring the Cost of Depreciation to Costing

    Hi,
    How to bring the Depreciation Cost, Interest on Working capital to Costing.
    We have created the Cost components for those mentioned items and what criteria we can bring the values to Costing.
    Thanks
    Prasad

    It's a big topic, ahah.
    Depreciation, Interest and Capitals  must be different primary cost element, right?
    Maintain cost component structure TC:OKKN to make sure your cost component split is by primary cost element splitting. Assign the cost elements of depreciation, interest or capitals to relevant cost component.
    Two way to define the cost bring to cost components,
    1. Define splitting structure TC: OKES and assign to manufacturing cost centers TC:OKEW
    2. Conduct activity type dependent planning through TC:KP06.

  • Assign the cost component Structure to Plant/Co Code

    hi
    can u tell how can i assign the COST COMPONENT STRUCTURE TO THE PLANT AND THE CO CODE...
    REGARDS

    Hi,
    This is part of Product costing configuration and done with T-code OKTZ.  Here, there is a separate diaglog for Assignment of Org units --> cost component structure.
    Here, for a particular co. code and all the plants under this Co. code or for only a certain plants and further to a specific costing variant the assignment is done to the cost component structure effective from certain date.
    Good Luck!!!
    Thanks and Regards,
    Bhuvaneswari.S

  • How to Assigning the company code to the billing units from ecc to crm

    Hi,
    Iam doing the roll out project , i require the help.
    can any one suggest me how to assign the company code to the billing units from ecc to crm.
    Thanks
    Mustafa

    Hi Mustafa
    You can load this data from R/3 to CRM by going to transaction R3AS in your CRM system, and using load objects EQUIPMENT, MATERIAL, and CUSTOMER_MAIN.
    Best Regards
    Gavin

  • How to assign the status profile to that particular user..?*

    Hello Everyone..
    I have created a status profile for the particulat sales order type so that a particular user can confirm the sales order and the pass it,so that further changes can be avoided.The profile has been assigned to Item category also.
    Now My problem is ,How to assign the status profile to that particular user..?
    so that only the user is allowed to change the order.
    Thanks

    Hi,
    Maintain authorization key (authorization code)  in status profile.
    We do not assign directly to user. We assign to role E.g sales manager / sales employee etc...
    We assign T.codes to role and assign role to user.
    Goto Role T.code PFCG. Enter role and click on change button.Goto Authorizations tab.
    Click on authorization data .
    Expand the  Cross-application Authorization Objects tree. Expand Status Management: Set/Delete User Status using Transaction.
    Click on Authorization key button, assign Authorization key.
    Click on status profile. assign status profile.
    Regards,
    Chandra

  • How to assign shioment cost profile

    Hi all
    Pl. tell me how to assign shioment cost profile to sales order type
    so that we can explore  extra -shipment cost menu option

    Ok,
    In SPRO go to LE- Transportation- shipment cost- Define profiles for shipment cost info.
    Create a shipment cost info profile by entering the TPP, Shipment type and Pricing procedure of shipment cost.
    Assign this profile in sales order type.under shipping tab "shipment cost info profile".
    Make sure that all the transportation config and masters are maintained.
    this should suffice.
    Regards
    Abhilash

  • How to find the cost center group from cycle/ segment in CO module?

    Hi All,
    I need to fetch the list of cost centers in the cost center group against the cycle.
    Is there any table which will store the list of cost centers against the cycle?
    or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
    but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
    Regards,
    Mrunal

    FM: RK_AL_CYCLE_READ
    CHECK TABLE: T811K

  • How to use the index method for pathpoints object in illustrator through javascripts

    hii...
    am using Illustrator CS2 using javascripts...
    how to use the index method for pathpoints object in illustrator through javascripts..

    Hi, what are you trying to do with path points?
    CarlosCanto

  • How to delete the Cost center line item data

    How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
    Is there any way to delete the line items in that cost center.
    Can data archiving & deleting can help us..........
    does it have any effect over other cost center data....
    any input needed.........
    regards
    rajesh

    Hi,
    i found 2 reports for you:
    1) CO_TOTAL_WRI - Archiving CO Totals Records   
    2) RKCOITW1     - Archiving CO Line Items: Write Program        
    from 2) is a linlk to customize archiv-parameters
    -> start it with transaction se38 / sa38
    A.

  • How to assign the dynamic value of PV to Sip Header in ICM?

    Hi everybody,
    I would like to ask your help, please. We are working on Temporary IVR Handoff (ICM+CVP). I need to add/modify a customer Sip header in ICM transfer script. The value for that header is dynamic and stored in the one of ICM Call Peripherial Variables (PV9, for examle).
    Is it possible somehow to assign the value of that PV9 to Sip header (Set Variable Call.SipHeader)? I tried to do it but unfortunally without any success. I can assign any static string, but how to assign the value of the PV??? That's the question...
    For static string assignment the syntax of the Set Variable Node (Call.SipHeader) looks like that:
    "IVR-Handoff~add~It's Cisco"
    and it works fine.
    For dynamic value (PV9) I tried:
    "IVR-Handoff~add~Call.PeripherialVariable9" - it add Call.PeripherialVariable9 as a string, but not it's value;
    "IVR-Handoff"~add~Call.PeripherialVariable9 - returns a syntax error;
    Call.PeripherialVariable9 - no Sip header is added.
    What do you think? Is it doable at all?
    Any ideas, answers or examples how to do it would be much appreciated.
    Thank you in advance.
    Dmitriy.

    Hi Senthil,
    Yes! It works, but with the little difference. The right answer is:
    "IVR-Handoff~add~"&Call.PeripherialVariable9
    (Call.PeripherialVariable9 is without quotes, otherwise it insert the name of the variable, but not it's value)
    The other solution is shown here (thanks to Paul Tindall):
    http://developer.cisco.com/web/cvp/forums/-/message_boards/message/15627744?p_p_auth=6psgR8ML
    concatenate("IVR-Handoff~add~",Call.PeripherialVariable9)
    Thank you so much for the idea! I very appreciate your help and vote you.

  • How to change the size of a particular object in the picture?

    How to change the size of a particular object in the picture?

    You need to select it.  Copy that selection to a new layer, and use Free Transform to resize it.
    http://www.youtube.com/watch?v=qWpAGmwhllQ
    http://www.youtube.com/watch?v=Bi4jJnYLkUA

Maybe you are looking for