How to assign values to Dynamic VO.
Hi All,
I have created a Dynamic VO and i have created 2 attributes(name and age) for it.
Can i create this dynamic VO in Process form request of one of the CO class?
Please let me know how to assign values to it......and display it and the page.?
Thanks,
Sowmya.
Mukul
I am trying to achieve something like below:
Creating a Dynamic VO in my extended controller's ProcessRequest() method and attaching it to a MessageChoiceBean. In ProcessFormRequest() method based on some condition i have to change my Dynaic VO's whereClauseParam and re-execute it so that it will show some different set of values. Below is the code which i used. But after re-executing it my LOV is still showing old set of values. I have posted a query regd. the same but dint get much help. Kindly let me know, if you have any comments. Also Please find the link to my earlier post.
Link: Re: Re-executed dynamic VO not showing new values
* CODE *
ProcessRequest()
ViewObject vo = (ViewObject)am.createViewObjectFromQueryStmt("dummyVO","SELECT MEANING AS VALUE FROM HR_LOOKUPS WHERE LOOKUP_TYPE = :1");
vo.setMaxFetchSize(-1);
vo.setWhereClauseParam(0,"input1");
vo.executeQuery();
OAMessageChoiceBean mesBean=(OAMessageChoiceBean)webBean.findIndexedChild(webBean,"DemoChoiceItem");
mesBean.setPickListCacheEnabled(false);
mesBean.setPickListViewObjectDefinitionName("dummyVO ");
mesBean.setPickListViewUsageName("dummyVO ");
mesBean.setListDisplayAttribute("VALUE");
mesBean.setListValueAttribute("VALUE");
ProcessFormRequest()
If the event is fired
S.O.P(....);
ViewObject vo1 = (ViewObject)am.findViewObject("dummyVO");
vo1.clearCache();
vo1.reset();
vo1.setWhereClause(null);
vo1.setWhereClauseParams(null);
vo1.setWhereClauseParam(0,"input2");
vo1.executeQuery();
S.O.P(....);
Thanks
Similar Messages
-
How to assign values to dynamic table
Hi All,
I am working with a dynamic table and an internal table. My internal table looks like this.
Projno Cust Opt Status
g1234 kkkkk p1 I001
g1234 kkkkk p2 I004
g1234 kkkkk p3 I001
g1234 kkkkk p5 I002
g1256 lmnvw p1 I003
g1256 lmnvw p3 I004
g1256 lmnvw p5 I005
g1256 lmnvw p7 I001
My Dynamic table struture looks like this
Projno Cust p1 p2 p3 p4 p5 p6 p7
I need data in my dynamic table from my internal table as follows
Projno Cust p1 p2 p3 p4 p5 p6 p7
g1234 kkkkk I001 I004 I001 I002
g1256 lmnvw I003 I004 I005 I001.
The problem is these operations may vary thats why i am using dynamic table. Even i cannot use case statement as the operations may vary.
Is it possible to do using Assign component or some other way.
ThanksThis program creates dynamic internal table
copy and paste in your program and test it .. debug it to know how it is creating dynamic internal table and values into that table.
report z_dynamic.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
perform write_out.
form get_structure.
data : idetails type abap_compdescr_tab,
xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
Get the structure of the table.
ref_table_des ?=
cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
clear xfc.
xfc-fieldname = xdetails-name .
xfc-datatype = xdetails-type_kind.
xfc-inttype = xdetails-type_kind.
xfc-intlen = xdetails-length.
xfc-decimals = xdetails-decimals.
append xfc to ifc.
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = ifc
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
form get_data.
Select Data from table.
select * into table <dyn_table>
from (p_table).
endform.
form write_out .
Write out data from table.
loop at <dyn_table> into <dyn_wa>.
do.
assign component sy-index
of structure <dyn_wa> to <dyn_field>.
if sy-subrc <> 0.
exit.
endif.
if sy-index = 1.
write:/ <dyn_field>.
else.
write: <dyn_field>.
endif.
enddo.
endloop.
endform. " write_out -
How to assigne value in sub record type
Dear below mention record type database,now i want to assigne value in payr_rec type,in this recrocrd type have one column party_id,but how can assigne value int this field ,
TYPE group_rec_type IS RECORD(
group_name VARCHAR2(255),
group_type VARCHAR2(30),
created_by_module VARCHAR2(150),
-- Bug 2467872
mission_statement VARCHAR2(2000),
application_id NUMBER,
party_rec PARTY_REC_TYPE := G_MISS_PARTY_REC
please guide.to get the desired default party_rec attribute value, just assign the "sub-record" attribute defaults as desired; PL/SQL will assign a default (non-null) record as the party_rec value using those attribute defaults:
create or replace package P_Test_It
as
type party_rec_type is record (
dummy varchar2(1) default 'X'
type group_rec_type is record (
group_name VARCHAR2(255),
group_type VARCHAR2(30),
created_by_module VARCHAR2(150),
-- Bug 2467872
mission_statement VARCHAR2(2000),
application_id NUMBER,
party_rec PARTY_REC_TYPE
end;
set serveroutput on
declare
rec p_test_it.group_rec_type;
begin
dbms_output.put_line(rec.party_rec.dummy);
end;
X
PL/SQL procedure successfully completed.Hope it helps.
Gerard -
How to assign values for more than one field
Hi,
I have written following code
constants: fieldname(30) value '(SAPMF02D)KNA1-AUFSD'.
constants: fieldname1(30) value '(SAPMF02D)KNA1-LISFD'.
constants: fieldname2(30) value '(SAPMF02D)KNA1-FAKSD'.
field-symbols: <L_FIELD> TYPE ANY.
field-symbols: <L_FIELD1> TYPE ANY.
field-symbols: <L_FIELD2> TYPE ANY.
Assign (fieldname) to <l_field>.
<L_FIELD> = 'ZB'. " value according to your requirement
Assign (fieldname1) to <l_field1>.
<L_FIELD1> = 'ZB'.
while debugging <l_field1> is not assinging (fieldname1).
Im able to assing for (fieldname).
how to assign value for (fieldname1).
plz suggest me to assign values for more than one field.
Regards,
BrahmajiHello,
Because there is no field name called LISFD in KNA1. Actually you misspelled the field name.
It is KNA1-LIFSD -
How to assign values to server group when you parallelly client-copying
Hello all,
I'm now trying to create server group.
Currently, I use serial process, or default settings, when client-copying.
But I want to implement this in parallel processes.
Due to this, I have to create server group and assign a lot of values to something I don't know!
I want to create a server group, but don't know how to assign values to ones like "Max. requests in queue", "Max. no of logons" and so on.
Could you please advise me how to allocate values to the resourses shown below;
Advanced : 1 *I think "1" is the flag for advanced settings
Max. requests in queue
Max. no. of logons
Max. disp. of own logon
Max. no. of WPs used: *should be the total of SM50, I guess
Min. no. of free WPs
Max. no. of comm. entries
Max. wait time
thanks in advance,
HozyHi,
Would you check this [Parallel Processes |http://help.sap.com/saphelp_sm32/helpdata/EN/e8/df959834ac11d586f90000e82013e8/frameset.htm] and [Parallel processes FAQ|http://www.saptechies.com/ccinfo-parallel-processes-faq/] i hope will get some hint.
Regards
Mohan Rao -
How to assign Values to nested table and pass as parameter to procedure?
How to assign Values to nested table and pass as parameter to procedure?
Below is the Object and its type
create or replace type test_object1 as object
val1 varchar2(50),
val2 varchar2(50),
val3 varchar2(50)
create or replace type test_type1 is table of test_object1;
create or replace type test_object2 as object
val1 varchar2(50),
val2 varchar2(50),
val3 varchar2(50)
create or replace type test_type2 is table of test_object2;
GRANT ALL ON test_object1 TO PUBLIC;
GRANT ALL ON test_type1 TO PUBLIC;
GRANT ALL ON test_object2 TO PUBLIC;
GRANT ALL ON test_type2 TO PUBLIC;
here is the table made of object type:
create table test_object_tpe
sl_num NUMBER,
description VARCHAR2(100),
main_val1 test_type1,
main_val2 test_type2
NESTED TABLE main_val1 STORE AS tot1
NESTED TABLE main_val2 STORE AS tot2;
here is the procedure which inserts values into nested table:
PROCEDURE INSERT_TEST_DATA(sl_num IN NUMBER,
description IN VARCHAR2,
p_main_val1 IN test_type1,
p_main_val2 IN test_type2
IS
BEGIN
FOR rec in p_main_val1.first..p_main_val1.last
LOOP
INSERT INTO xxdl.test_object_tpe
sl_num,
description,
main_val1,
main_val2
VALUES
sl_num
,description
,test_type1 (test_object1(
p_main_val1(rec).val1,
p_main_val1(rec).val2,
p_main_val1(rec).val3
,test_type2 (test_object2( p_main_val2(rec).val1,
p_main_val2(rec).val2,
p_main_val2(rec).val3
END LOOP;
commit;
END INSERT_TEST_DATA;
here is the anonymoys block which assigns values to the object type and pass values into the procedure:
set serveroutput on;
declare
p_sl_num NUMBER := 1001;
p_description VARCHAR2(50) := 'Testing Val1';
inval1 test_type1 := test_type1();
inval2 test_type2 := test_type2();
begin
inval1(1).val1 := 'testx1';
inval1(1).val2 := 'testx2';
inval1(1).val3 := 'testx3';
inval2(1).val1 := 'testy1';
inval2(1).val2 := 'testy2';
inval2(1).val3 := 'testy3';
CSI_PKG.INSERT_TEST_DATA(sl_num => p_sl_num,
description => p_description,
p_main_val1 => inval1,
p_main_val2 => inval2
end;
Can anybody correct me.
Thanks,
LavanThanks for posting the DDL and sample code but whenever you post provide your 4 digit Oracle version (result of SELECT * FROM V$VERSION).
>
How to assign Values to nested table and pass as parameter to procedure?
>
Well you are doing almost everything wrong that could be done wrong.
Here is code that works to insert data into your table (the procedure isn't even needed).
declare
p_sl_num NUMBER := 1001;
p_description VARCHAR2(50) := 'Testing Val1';
inval1 test_type1 := test_type1();
inval2 test_type2 := test_type2();
begin
inval1.extend();
inval1(1) := test_object1('testx1', 'testx2', 'testx3');
inval2.extend();
inval2(1) := test_object2('testy1', 'testy2', 'testy3');
INSERT INTO test_object_tpe
sl_num,
description,
main_val1,
main_val2
VALUES
(p_sl_num, p_description, inval1, inval2);
commit;
end;
/See Example 5-15 Referencing a Nested Table Element in Chap 5 Using PL/SQL Collections and Records in the PL/SQL doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/collections.htm#CJABEBEA
1. You don't even need the procedure since all it does is a simple INSERT into the table which you can do directly (see my code above)
inval1(1).val1 := 'testx1';There is no element one (1) of 'inval1' since you haven't created any elements yet. You need to EXTEND the collection to add an element
inval1.extend();And then there is an empty element but 'inval1' is a container for objects of type 'test_object1' not for scalars like 'val1', 'val2', and 'val3'.
So you can't do
inval1(1).val1 := 'testx1';You have to create an instance of 'test_object1'
inval1(1) := test_object1('testx1', 'testx2', 'testx3');And so on for the other collection
You don't need the procedure (as my sample code shows) but once you populate the variables properly it will work. -
How to assign values to JTable using mysql database
how to assign value to JTable using mysql...
Search the forum. You use the values of the "ResultSet" to create a "DefaultTableModel" which you then add to the "JTable".
I'll let you pick the search keywords to use, which I've suggested above. You can also throw in my userid if you want to specifically look for my solution. -
How to assign values to a work area which is a Field Symbol?
Hello Experts!
I really need your help! this is the problem:
I need to assign values to fields into a work area which is a field symbol. The values come from a flat file I uploaded and as I can't know the length I had to build the structure dynamically ( That's why I'm using FS). Each field comes from the file separated by ';', I tried using the SPLIT sentence:
"SPLIT text AT ';' INTO TABLE <dyn_table>." but the values are assigned vertically into the same field instead of horizontally into each field of the table(field-symbol table).
I know the name of the field dynamically
(a TEXT + number) and I know I can't do this
<dyn_wa>-TEXT1 or field_name = 'TEXT1' <dyn_wa>-(field_name).... ohhh I'm blocked, I don't seem to find the answer, please help!
Thanks in advance!!
FrineeNow that you have a table with the values, you can move them to the work area.
data: begin of wa,
fld1(20) type c,
fld2(20) type c,
fld3(20) type c,
* and so on
end of wa.
data: istr type table of string with header line.
field-symbols: <fs>.
split text at ';' into table istr.
loop at istr.
assign component sy-tabix of structure wa to <fs>.
if sy-subrc <> 0.
exit.
endif.
<fs> = istr.
endloop.
write:/ wa-fld1, wa-fld2, wa-fld3.
Now, WA has the values in a horizontal fashion.
Regards,
Rich Heilman -
How to Change Value set Dynamically for a Parameter in Apps?
Hi All,
I have a requirement where i need to change the value set dynamically for a given Parameter. This goes as, I have a Concurrent Program with 4 parameters. First Parameter is mandatory Business group.Second Parameter is Warehouse. Based up on the First parameter the second parameters LoV's are displayed, the third and fourth parameters value sets are dependent up on the Second parameter value. Parameter 2,3,4 Value sets are Table type. So i Used .$FLEX$.Value_setname to retrive the LOV's
The Requirment now is that if the User doesn't enter the Parameter 2 than the Third Parameter field must be Open and he must be able to enter the Free text. In my case it is an Order Number. If the User enters the paramter 2 value than LOV's for ORder number pertaining to that Warehouse must get displayed. I've figured that this can be possible only if i change the Valuesets Dyanamically. I'm not sure if that is possible or not.
I have tried :
Using a Dummy Parameter with a new valueset(Transactable Independent) and giving Y and N based up on Warehouse parameter input.
SELECT (DECODE ( :$FLEX$.WAREHOUSE_NAMES,NULL,'Y','N')) from dual;
The default type was SQL.
Then in the 3rd Parameter i have used Case function to differentiate Y or N. The third parameter being ORder number, is a table type and derived from Oe_order_headers_all.
In the Query section i tried using dummy parameter value set to retreive the values. I was terribly Unsuccessful in doing so.
Does the above Case exists or is Doable? Please, Help me out if somone had worked on Similar thing or have any idea of standard report/program using it in Oracle.
Thanks alot for the Help!You will probably have better luck on the eBusinesSuite forum. This is more of a setup issue when defining your LOV and program parameters than it is a SQL or PL/SQL issue.
http://forums.oracle.com/forums/category.jspa?categoryID=3
Good luck - this is an aggravating issue to work with and I wish I did have the answer for you! -
How to assign values for boolean array in LabVIEW?
I want assign values for boolean array.Iam not able to do that.For each boolen i want to assign each value.Plz help me......
Please Mark the solution as accepted if your problem is solved and donate kudoes
Solved!
Go to Solution.Hi agar,
values in an array are "assigned" by building an array (using BuildArray) or by replacing values in an existing array (ReplaceArraySubset)!
Good starting point could be this...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
How to read values of dynamic UI elements in a backing bean?
Hi, I have an ADF page where some of the UI elements (in this case, checkboxes) are dynamically rendered as such:
<af:forEach var="row" items="#{backing_testPage.userList}">
<af:selectBooleanCheckbox id="checkbox" value="#{row.id}"
text="#{row.name}" selected="#{row.userSelected}"/>
</af:forEach>
I am wondering how can I read the values of these checkboxes in my page's backing bean. It does not seem possible to specify a distinct binding value for the selectBooleanCheckbox elements in order to tie them to a CoreSelectBooleanCheckbox variable in my backing bean (so that I could check whether the checkbox is selected or not).
When the page gets rendered, I did see that the checkboxes get assigned distinct ids like checkbox_1, checkbox_2, checkbox_3, etc... Not sure if that would help with this.
Would appreciate any tips on this as I've been struggling with this for awhile. Thanks!You probably would do better with a SelectManyCheckbox. Here's how:
In your backing bean you need:
private String[] usernames;
public String[] getUsernames () {
return usernames;
public void setUsernames (String[] _usernames) {
usernames = _usernames;
}In your page:
<af:selectManyCheckbox value="#{backing_testPage.usernames}">
<f:selectItems value="#{backing_testPage.userList}"/>
</af:selectManyCheckbox>When the form is rendered any strings in the usernames array that are in the userList will be checked. When submitted, any checked items will be in the array. -
BCD_FIELD_OVERFLOW error while assigning value to dynamic work area
Hi guys,
I am trying following code --it uses dynamic table concept.
LABSTD2 TYPE P DECIMALS 1,
LABST_2 TYPE P DECIMALS 1,
LABST_12 TYPE P DECIMALS 1,
T_ARTMAS-LABST_12 = T_ARTMAS-LABSTD1 + T_ARTMAS-LABSTD2.
ASSIGN COMPONENT 'LABST_12' OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
<DYN_FIELD> = T_ARTMAS-LABST_12.
Value in T_ARTMAS-LABST_12 in debug was 14690.0....still it gave following error-----
Runtime Error BCD_FIELD_OVERFLOW
Except. CX_SY_CONVERSION_OVERFLOW
Even i changed decleartion as follows
LABST_12 TYPE P lenght 10 DECIMALS 1,
Still it is giving same problem ...
Kindly help.Hi, I think it has nothing to do with an overflow but something with the code. Try this simple (rather stupied) code:
TYPES: BEGIN OF ty_line,
fld1 TYPE p DECIMALS 1,
fld2 TYPE p DECIMALS 1,
fld3 TYPE p DECIMALS 1,
END OF ty_line.
DATA lv_rec TYPE ty_line.
DATA lv_count(1) TYPE n.
DATA lv_fld1 TYPE p DECIMALS 1.
DATA lv_fld2 TYPE p DECIMALS 1.
DATA lv_fld3 TYPE p DECIMALS 1.
DATA lv_field TYPE string.
FIELD-SYMBOLS: <fs_fld> TYPE any.
BREAK-POINT.
lv_fld1 = 15211444 / 10.
lv_fld2 = 54879072 / 10.
lv_fld3 = lv_fld1 + lv_fld2.
DO 3 TIMES.
lv_count = lv_count + 1.
CLEAR lv_field.
CONCATENATE 'lv_rec-fld' lv_count INTO lv_field.
CONDENSE lv_field NO-GAPS.
ASSIGN (lv_field) TO <fs_fld>.
<fs_fld> = lv_fld3.
ENDDO.
BREAK-POINT.
Succes. -
How to pass values in dynamic structure and then dynamic table
Hi,
we have a Z structure in se11 holding 10 fields. But at run time i need to create a dynamic table with more than 10 records.
I am able to create the structure and corresponding internal table. Now the issue is i have to populate this dynamic structure with some values and then append it to dynamic internal table. Since the dynamic table type is any its not allowing an index operation like modify etc etc.
Could anyone help me in passing the values . I have searched in SDN . everyone created a dynamic table and then populated it values from some standard or custom tables.Then assigning the component of structure and displaying the output. but in my situation i have no such values stored in any tables. i populate values based on certain calculation.Hi Friends,
This is the piece of code.After creating dynamic work area and dynamic table what i should do?
TYPES: BEGIN OF STR,
ID TYPE I,
NAME(30) TYPE C,
END OF STR.
data: v_lines type i.
STR_TYPE ?= CL_ABAP_TYPEDESCR=>DESCRIBE_BY_NAME( 'STR' ).
STR_COMP = STR_TYPE->GET_COMPONENTS( ).
APPEND LINES OF STR_COMP TO COMP_TAB.
COMP-NAME = 'NAME1'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'VALUE1'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'NAME2'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'VALUE2'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'NAME3'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'VALUE3'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
NEW_STR = CL_ABAP_STRUCTDESCR=>CREATE( COMP_TAB ).
NEW_TAB = CL_ABAP_TABLEDESCR=>CREATE(
P_LINE_TYPE = NEW_STR
P_TABLE_KIND = CL_ABAP_TABLEDESCR=>TABLEKIND_STD
P_UNIQUE = ABAP_FALSE ).
CREATE DATA DREF TYPE HANDLE NEW_TAB.
CREATE DATA DREF1 TYPE HANDLE NEW_str. -
How to get values from dynamically populated field symbol
Hi all,
I am having a field symbol <fs_table> type standard table, which is getting populated dynamically.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = i_fieldcat[]
IMPORTING
ep_table = is_eptab.
ASSIGN is_eptab->* TO <fs_table> .
After the ALV display i am making some changes in the ALV and getting a new internal table <fst_table>,which is having changed values.
Now the problem is that i am not able to get the changed values from <fst_table> as it is not of any structure type and cant associate it with any field like we do in normal internal table and work areas like, wa-fieldname.
All the fields are dynamic.
Regards,
AnantHello Anant
You have to access to access the fields of your dynamic outtab dynamically as well.
DATA: ls_fcat TYPE lvc_s_fcat.
FIELD-SYMBOLS:
<ls_struc> TYPE any,
<ld_fld> TYPE any.
LOOP AT <fs_table> ASSIGNING <ls_struc>.
LOOP AT i_fieldcat INTO ls_fcat.
ASSIGN COMPONENT ls_fcat-fieldname OF STRUCTURE <ls_struc> TO <ld_fld>.
... " do processing
ENDLOOP.
ENDLOOP.
Regards
Uwe -
How to retrieve values from Dynamic Selection screen while using LDB - PSJ
I am having problem in PSJ Logical database. In a custom report which is using PSJ LDB, we are using PROJ and PRPS_R tables.
When I run program it displays one dynamic selection screen, there we are giving selection criteria for PRPS (Master data WBS element) - Created on (giving some range like 2011/01/01 to 2011/01/31).
So I want to display all WBS element which are created during the period (2011/01/01 - 2011/01/31).
How do I retrieve the select-option low and high value of the field Created on Of WBS element if we Select data from any table based on this condition.
Please help me.
Thanks.in fact you don't have to get the values, you only need to tell to the program to take them into account :
GET PRPS.
CHECK SELECT-OPTIONS.
Maybe you are looking for
-
Plzzz help me Jumping because of the antenna in iphone 5s
plzzz help me >> Jumping because of the antenna in iphone 5s plz help me i from irann 2day ago Jumping because of the antenna
-
RAM usage increases with time, problem?
Hi all, Whislt I've been playing with linux on the side for a few years the past few weeks have been my first foray into using linux as my main OS, in the form of Arch. It's been a steep learning curve but I'm enjoying the experience and wealth of in
-
Video on iphone4s copied to laptop with vista but no videos can be played from laptop
I have transferred all my videos & pictures from our iphone(s) 4S to our laptop running windows vista. I have no probelm viewing the photos however.... I can see the video file(s) in Windows photo gallery -- but when you click on the file it say "th
-
Reactivating integration models
Hello All, I deactivated a big sales order integration model in my production system. While trying to reactivate the RIMODAC2 program is taking huge time(30 mins) to complete for 5 part-plant combination. I have around 100K part-plant combinations. I
-
Content Barrier will not let me open gmail, no matter how i set its preferences. Does anyone know if this is a bug, or how to fix it?