How to attach a logo to a selection screen?

I needed to show the logo on the selection screen of a report.
So I went through several postings on this topic, created and uploaded the logo via OAER against the PICTURES object.
Per the posting, it tells to pass the value C:\logo.gif' as the url
I did so - but the logo does not appear on the screen.
So I went thorugh some demo programs - the demo programs are looking for entries in wwwparams table and are hard coding the object id while fetching these entries.
I looked for my entry in the wwwparams table, but nothing got updated into this.
Let me know if I am missing anything..
Thanks,
Ven

Hi,
Please check this thread..
Picture in selection screen
THanks
Naren

Similar Messages

How to attached CLAD logo

my dear readers,
I might classified myself as the least person for not knowing this but since I am "newly CLAD passer", (I just received the result TODAY!) then it will be my 1st time to have a logo here in the discussion forum.
I know it will be a big responsibility for being certified (since they expect us to be better than average), but this is how CLAD passer became more responsible in their chosen career, and a challenge to be a better programmer each passing days.
feels good to be CLAD certifified, but feels better than best to the undeserving ones'!
with all of this introductions, I just want to share my hapiness here in the forum.
Please dont forget teach me how to include the CLAD logo. haha.
thank you and regards,
ivel
Ivel R. | CLAD

Hello guys,
based on what i understand, this was done in LV programming code? thanks for the additional very helpful hints. for now, I just want to customize my picture here, and to know how to attach some logo in the footer of my message (just being curious how others have done this). my question points out how to customize my signature and image in this forum (unrelated to LV codes).
but if your messages are dealing exactly on what i need, please assist me on further details. my bad.
For clarity, i attached two files that locates where i want to put my logo.
regards,
ivel
Ivel R. | CLAD
Attachments:
3.jpg ‏16 KB
1.jpg ‏25 KB

How to pass a default value in selection screen of logical database pnpce

Dear All,
Can any one tell me how to pass a default value in selection screen of logical database pnpce .
Regards
Rakesh Singh

Hi Rakesh,
Go to SE36 (logical database Builder).First enter PNPCE in Logical Database and press documentation,here you will get the details of exactly what is PNPCE and how it works.After that select selections in subojects in se36 only and enter display ,there you have the include from where you acn get the idea.
Regards,
Rahul

How to Improve the performance in Variable Selection Screen.

Hi,
In Query Level we have Variable " User entry Defalt Valu". User want select particular value when he press "F4" it's take hours time how to improve the performance in Varaible Selection Screen.
Thanks in Advance.
Regards,
Venkat.

Dear Venkat.
You please try the following steps:
1. Say the InfoObject is 0EMPLOYEE against which you have created the variable, which user is trying to select value against, when they execute the report.
2. Goto RSA1-> InfoObject tab-> Select InfoObject 0EMPLOYEE.
3. Selcet the following options:
Query Execution Filter Val. Selectn - 'Only Posted Value for Navigation'
Filter Value Repr. At Query Exec. - 'Selector Box Without Values'
Please let me know if there is any more issue. Feel free to raise further concern
Thnx,
Sukdev K

How to provide F4 help in a selection screen

Hi..
   How to provide F4 help in a selection screen for a particular field using
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'.
Thanks in Advance.
Regards
Raj Kumar

AT SELECTION SCREEN
at selection-screen on value-request for s_contr-low.
Get contract (low value)
perform get_contract changing s_contr-low.
form get_contract changing p_contr .
types: begin of ty_ycontract,
           ycontract type xchcontract-ycontract,
           lifnr     type xchcontract-lifnr,
           ycontdate type xchcontract-ycontdate,
           ycont_end_dt type xchcontract-ycont_end_dt ,
         end of ty_ycontract.
data: ds_returntab   type ddshretval,
        dt_returntab   type table of ddshretval,
        dl_fieldname     type dfies-fieldname.
data: dt_ycontract type table of ty_ycontract.
select ycontract lifnr ycontdate ycont_end_dt
    from xchcontract
    into table dt_ycontract.
if sy-subrc = 0.
    clear dl_fieldname.
    dl_fieldname = 'YCONTRACT'.
    call function 'F4IF_INT_TABLE_VALUE_REQUEST'
      exporting
        retfield        = dl_fieldname
        value_org       = 'S'
      tables
        value_tab       = dt_ycontract
        return_tab      = dt_returntab
      exceptions
        parameter_error = 1
        no_values_found = 2
        others          = 3.
    if sy-subrc = 0.
      clear ds_returntab.
      read table dt_returntab into ds_returntab index 1.
      if sy-subrc = 0.
        p_contr = ds_returntab-fieldval.
      endif.
    endif.
endif.
endform.

How to Remove the underline from the selection screen parameter

How to remove the underline from a selection screen parameter ?

>
Anoop Menon wrote:
> hi Avinash,
>
> I am not able to understand the use of the 'comment line properly.
>
> The last part of the statement which says modif id is confusing.
>
> Please clarify..... I am unable to activate my code when I put the selection screen commebnt statement.
Use this and update it to your requierement !
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 1(30) comm.
PARAMETERS test(1) type c.
SELECTION-SCREEN end of line.
INITIALIZATION.
comm = 'test'.

How to add profit center in fbl5n selection screen

how to add profit center in fbl5n selection screen
and
it is save to copy ddf from sap to cus
wll it affect anything else

When you are on selection screen of FBL5N, press (Shift + F4) DYNAMIC SELECTIONS, there you will see a Dynamic selection screen along with your normal FBL5N selection screen, you will find Profit Centre ther, if you don't find Profit Centre in Dynamic Selection Screen you can add the same from the list on the left, search for profit centre, place your cursor on Profit centre and press the Arrow Button(Copy Selected) on top of the list. Now you will find Prfit Centre in Dynamic selection screen, fill the field with values and press save, that's it.....
Reward points if useful, get back in case of query...
Cheers!!!

How to disable a pushbutton created in selection screen.

How to disable a pushbutton created in selection screen.

you can make it invisible during runtime.
At the event, AT SELECTION-SCREEN OUTPUT. you can turn attributes on and off for screen elements. In this case, invisible = 1, makes the element invisible, 0 makes is visible.
here is a short sample.
report zrich_0001.
parameters: p_check type c.
selection-screen pushbutton 40(20) gocfg
                     user-command gocfg.
at selection-screen output.
loop at screen.
    if screen-name = 'GOCFG'.
      screen-invisible = '1'.
      modify screen.
    endif.
endloop.
Regards,
Rich Heilman

How to create Option Boxes IN A SELECTION SCREEN

How to create Option Boxes IN A SELECTION SCREEN.
Thanks!

Hi Rajesh,
The following explanation gives clear picture of what is mean of check box and radio button with coding.....................
CHECK BOX :
AS CHECKBOX [USER-COMMAND fcode]
Effect:
This addition specifies that the input field in the first position of the selection screen is displayed as a checkbox, with the corresponding description next to it on the right. The checkbox is selected if the value of para is "X" or r "x". Otherwise, it is not selected.
The parameter must be created with the type c and length 1. An explicit length len is not permitted. If the addition TYPE is used, this can only be followed by the generic type c or a non-generic data type of type c and length 1.
The addition USER-COMMAND can be used to assign a function code fcode to the parameter. The function code fcode must be directly specified and may have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects the checkbox on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Notes
If the TYPE addition is used to make a reference to a data type in the ABAP Dictionary of type CHAR and length 1, and for which t the valid values in the domain are defined as "X" and " ", the parameter is automatically displayed as a checkbox on the selection screen.
If the addition USER-COMMAND is specified without the addition AS CHECKBOX, and the parameter is of type c with length 1, it is also displayed as a checkbox.
The addition USER-COMMAND can, for example, be used for screen modifications with the addition MODIF ID (see example).
Coding :
PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p1(10) TYPE c,
 p2(10) TYPE c,
 p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p4(10) TYPE c MODIF ID bl2,
 p5(10) TYPE c MODIF ID bl2,
 p6(10) TYPE c MODIF ID bl2.
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF show_all <> 'X' AND
 screen-group1 = 'BL2'.
 screen-active = '0'.
 ENDIF.
 MODIFY SCREEN.
ENDLOOP.
RADIO BUTTON COMMAND :
RADIOBUTTON GROUP group [USER-COMMAND fcode]
Effect:
This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type c and length 1.
In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Note:
It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
CODING :
tables : mkpf,mseg,ekko.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1,
 c as checkbox.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X' USER-COMMAND UC1.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
write :/ p_werks,
 / s_ebeln.
AT SELECTION-SCREEN OUTPUT .
LOOP AT SCREEN .
IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Let me knwo if any doubts.
Reward with points if it helpful
Regards,
Vijay

How can we use list box on selection screen

hi, howe can we use list box on selection screen and how can we populate the dat ainto the list box and how can we retrive data based on list box from ther database.
thanks in advance
raju

Use the VRM_SET_VALUES function module.
DATA: list TYPE vrm_values,
 value LIKE LINE OF list.
 AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
name = 'P_OBJECT'.
CLEAR list.
REFRESH list.
CLEAR value.
value-key = '1'.
value-text = 'Development Class'.
APPEND value TO list.
CLEAR value.
value-key = '2'.
value-text = 'Program'.
APPEND value TO list.
CLEAR value.
value-key = '3'.
value-text = 'Function Module'.
APPEND value TO list.
CLEAR value.
value-key = '4'.
value-text = 'Database Table'.
APPEND value TO list.
CLEAR value.
value-key = '5'.
value-text = 'Structure'.
APPEND value TO list.
CLEAR value.
value-key = '6'.
value-text = 'View'.
APPEND value TO list.
CLEAR value.
value-key = '7'.
value-text = 'Data Element'.
APPEND value TO list.
CLEAR value.
value-key = '8'.
value-text = 'Table Type'.
APPEND value TO list.
CLEAR value.
value-key = '9'.
value-text = 'Class / Interface'.
APPEND value TO list.
CLEAR value.
value-key = '10'.
value-text = 'Type Group'.
APPEND value TO list.
CLEAR value.
value-key = '11'.
value-text = 'Domain'.
APPEND value TO list.
CLEAR value.
value-key = '12'.
value-text = 'Search Help'.
APPEND value TO list.
CLEAR value.
value-key = '13'.
value-text = 'Lock Object'.
APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
 EXPORTING
 id = name
 values = list
 EXCEPTIONS
 id_illegal_name = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

How to add program documentation icon on selection screen

Hi All,
Please let me know how to add program documentation icon on selection screen.
Thanks
Jog

THis is pretty straight forward, in se38, enter program name, click change. Now click Go To, Documentation. Enter the documentation on this screen, save and activate, now run the program, the icon will be there.
REgards,
Rich Heilman

Adding logo/image on selection screen

How can I add logo or image on my selection screen??? or else use a picture as a background on the selection screen??
P.S : I have already searched the forum and have not got any suitable answer..most of them are about adding image on module pool screen..but I want it in my selection screen???

Hi ,
Try like this
AT SELECTION-SCREEN OUTPUT.
PERFORM show_pic.
**& Form show_pic
FORM show_pic.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
EXPORTING
border = 5.
CALL METHOD picture_control_1->set_display_mode
EXPORTING
display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
EXPORTING
height = 55
left = 750
top = 08
width = 350.
CALL METHOD picture_control_1->load_picture_from_url
EXPORTING
url = 'C:\zpic.gif'.
*here you give the path where your pic is stored on the desktop
IF sy-subrc NE 0.
ENDIF.
ENDFORM.
Regards,
Nandha

How to create a variant for a selection screen button

hi ,
      i have created a selection screen for a normal report .
In the selection screen there is one button after the selct option for company code. when user enters some company code and presses the button the user i call a able contraol in which user gives some additional values for the comapny code.
how do i create variant. when i create varaint for the slection screen it does not take into account the other screen i called .
so every time user has to click that button and enter some values and execute. please suggest some way.
THANKX IN ADAVANCE:)

Hi,
      Inorder to create a variant for selection screen report, you need to enter valid data on the screen and click on the SAVE button which is available in the Menu.
      And regarding the button you were asking about after select option, it is not created manually it comes automatically,, you can remove this by mentioning no-extension after the select-option. You can get clear information of this if you do F1 help on select-option.
My advice to you, make effect use of F1 help.
Edited by: Madhuri on Sep 23, 2008 4:46 PM

How to put a value in a selection screen parameter

how do i forcefully put a value to a field in the selection screen.
i mean during runtime.
and it's a parameter not a selection-option.
thanks

Hi,
Check this sample code.It can help you.Basically you need to use 'DYNP_VALUES_READ' in at selection-screen on value-request for s_posnr-low.
tables : vbap. " Sales Document: Item Data
 Constant Declaration *
CONSTANTS:
C_X TYPE C VALUE 'X'. " Translate to Uppercase
 Variable Declaration *
Variable for Table index
data v_sytabix like sy-tabix.
Variable for Program name
data L_NAME LIKE SYST-REPID.
Range for getting values form selection screen
DATA: BEGIN OF range1 OCCURS 0,
 SIGN(1),
 OPTION(2),
 LOW LIKE vbap-vbeln,
 high like vbap-vbeln,
 END OF range1.
Internal table for Report output
data: begin of i_vbap occurs 0,
 vbeln like vbap-vbeln, " Sales Document
 posnr like vbap-posnr, " Sales Document item
 end of i_vbap.
Internal table for output to the F4 help
data: begin of I_DISPLAY occurs 0,
 vbeln like vbap-vbeln, " Sales Document
 posnr like vbap-posnr, " Sales Document item
 end of I_DISPLAY.
Internal table for return value form function module
DATA: BEGIN OF I_RETURNVAL OCCURS 0.
 INCLUDE STRUCTURE DDSHRETVAL. " Interface Structure Search
DATA: END OF I_RETURNVAL.
Internal table for F4 help field heading
DATA: I_FIELDTAB LIKE DFIES OCCURS 0 WITH HEADER LINE.
Internal table for getting screen values from selection screen
data L_SCR_FIELDS LIKE DYNPREAD OCCURS 1 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME title text-001.
select-options:
 S_VBELN for vbap-vbeln no intervals,
 S_POSNR for vbap-posnr no intervals.
SELECTION-SCREEN end OF BLOCK B1.
at selection-screen on value-request for s_posnr-low.
clear: L_SCR_FIELDS, I_FIELDTAB, i_display, I_RETURNVAL.
refresh: L_SCR_FIELDS, I_FIELDTAB, i_display, I_RETURNVAL.
L_NAME = SYST-REPID.
MOVE 'S_VBELN-LOW' TO L_SCR_FIELDS-FIELDNAME.
APPEND L_SCR_FIELDS.
Call the Function module DYNP_VALUES_READ to get the values form
selection screen
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = L_NAME
 DYNUMB = SYST-DYNNR
 TRANSLATE_TO_UPPER = C_X " X
 TABLES
 DYNPFIELDS = L_SCR_FIELDS
 EXCEPTIONS
 INVALID_ABAPWORKAREA = 1
 INVALID_DYNPROFIELD = 2
 INVALID_DYNPRONAME = 3
 INVALID_DYNPRONUMMER = 4
 INVALID_REQUEST = 5
 NO_FIELDDESCRIPTION = 6
 INVALID_PARAMETER = 7
 UNDEFIND_ERROR = 8
 DOUBLE_CONVERSION = 9
 STEPL_NOT_FOUND = 10
 OTHERS = 11
IF SY-SUBRC eq 0.
 LOOP AT L_SCR_FIELDS.
 range1-sign = 'I'.
 range1-option = 'EQ'.
 range1-low = L_SCR_FIELDS-FIELDVALUE.
 range1-high = space.
 append range1.
 ENDLOOP.
ENDIF.
F4 help Field headings
I_FIELDTAB-TABNAME = 'I_DISPLAY'.
I_FIELDTAB-FIELDNAME = 'VBELN'.
I_FIELDTAB-POSITION = '1'.
I_FIELDTAB-OUTPUTLEN = '10'.
I_FIELDTAB-INTTYPE = 'C'.
I_FIELDTAB-INTLEN = '10'.
APPEND I_FIELDTAB.
I_FIELDTAB-FIELDNAME = 'POSNR'.
I_FIELDTAB-POSITION = '2'.
I_FIELDTAB-OFFSET = '10'.
I_FIELDTAB-OUTPUTLEN = '6'.
I_FIELDTAB-INTTYPE = 'N'.
I_FIELDTAB-INTLEN = '6'.
APPEND I_FIELDTAB.
Retrieve sales document, Sales document item from table Sales
Document: Item Data(VBAP).
Primary keys used for selection: VBELN
select vbeln posnr from vbap
 into table i_display
 where vbeln in range1.
Call the function module F4IF_INT_TABLE_VALUE_REQUEST for F4 values
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'POSNR'
 WINDOW_TITLE = 'Line Item'
 VALUE_ORG = 'S'
 MULTIPLE_CHOICE = C_X " (for muliple selection)
 TABLES
 VALUE_TAB = I_DISPLAY
 FIELD_TAB = I_FIELDTAB
 RETURN_TAB = I_RETURNVAL
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
Star for For single values
READ TABLE I_RETURNVAL INDEX 1.
 S_POSNR-LOW = I_RETURNVAL-FIELDVAL.
End for the single values
Start For multiple selection
 loop at i_returnval.
 s_posnr-sign = 'I'.
 s_posnr-option = 'EQ'.
 s_posnr-low = I_RETURNVAL-FIELDVAL.
 append s_posnr.
 endloop.
 sort s_posnr.
 read table s_posnr index 1.
End for multiple selection
ENDIF.
 Start-of-selection *
start-of-selection.
Retrieve sales document, Sales document item from table Sales
Document: Item Data(VBAP).
Primary keys used for selection: VBELN
select vbeln posnr from vbap
 into table i_vbap
 where vbeln in s_vbeln
 and posnr in s_posnr.
if the above selection is successful continue the process else exit *
form the report
if sy-subrc ne 0.
 message e002 with 'No data to display'.
endif.
end-of-selection.
if not i_vbap[] is initial.
 loop at i_vbap.
 write:/ i_vbap-vbeln, i_vbap-posnr.
 endloop.
endif.

How to haveour own titles/captions in selection screen & in column headings

we have SAP B1 2005 A, MS SQL 2005
though i am new to MSSQL/T-SQL programming, purely through lot of trials & errors i have learnt & managed to develop many reports/queries !
but, i am facing some problems : how to have our own captions/title for the options in selection screen & aso in reports/queries column headings.
e.g. :
for Customer Aging analysis, i would like to accept a set of 3 parameters (aging days) from the user. where the user may enter the values 30, 60 & 90 OR any other values.
i have the following codes for this purpose (considering my question's (over) size, only small portions of my program are given below)
declare @mdue1 int,
 @mdue2 int,
 @mdue3 int
set @mdue1 = [%1]
set @mdue2 = [%2]
set @mdue3 = [%3]
but, in the selection screen, the system displays "%1 Debit Amount Greater than" as the caption & 0.00 as the default value. the same is the case for the other two parameters [%2] & [%3] also.
i tried defining the variable @mdue1 as smallint & also tinyint, but the result is the same.
how to have our own captions/title for the options in selection screen instead of the ones displayed by t-sql based on our SELECT statement.
how to have our own column headings, dynamically defined/coined using variables instead of hard coded columns headings (within quotes).
e.g. in the select statement, instead of defining a column as '<= 30 Days' = T0.due_1
i would like to get the number of days from the user, who may enter 30 or 40 or whatever.
i would like to display the value that the user entered in the column heading using a variable say @mcol1
declare @mcol1 varchar(10)
set @mcol1 = '<= 'convert(varchar(10), @mdue1)' Days'
SELECT T0.CardCode,@mcol1 = T0.due_1 from #CustAging T0
but, this ends up in error.
i have already searched the net for ebooks, articles, etc. for a solution to this problem, but till now, i could not find any addressing these problems.
i have just registered in this forum with a hope to get a solution. thanks a lot in advance.
Thanks & Regards,
Raghu Iyer
Place : Vapi, Gujarat, India

thanks a lot, lstvan.
i think, it i a good "trick" worth trying out.
well, i will now mark this question as answered, but still, if anyone has a direct solution "problem", please do share with us.
i am able to write queries (in fact, full fledged programs) in T-SQL & getting the desired output and for such a trivial thing i do not want to go for an add-on SDK module. but, considering the limitations of T-SQL and the complex requirements of real business world, i think, we have to go the .net way only.
regarding add-ons, i heard that add-ons will slow down SAP B1. is it true ?
Thanks & Regards,
Raghu iyer

How to attach a logo to a selection screen?

Similar Messages

Maybe you are looking for