How to attach a MS Word document to Quotation/Sales Order?

Hi all
Can somebody let me know how to attach MS Word documents in Quotation (VA 21) or Sales Order (VA01) screens

Hi,
Please use the "Services for Object" Icon just below the menu bar in the Sales order overview screen for attaching any document into the sales order. Once you get into the drop down, select Create - Create Attachment" option.
The attachment can be viewed from the same icon! In the drop down, select Attachment list!
Hope, this helps!
Thanks
Siva
Sorry,when I opened the message for replying, no one had replied till then. ***
Message was edited by:
        Sivasubramanian Senguttuvan

Similar Messages

  • How to find out the Accounting document status for sales order

    Hi
    We have created the sales document by referring the billing document of contract no.Aftre that we have raised invoice for sales document. Now system is generated both invoice , accounting document and the value is appearing against the invoice document. However the status against the accounting document is showing as not cleared. I want to know where we could see this status in Table,
    Normally we can see the status in FPLT for contracts since its having the billing plan no. Suppose if the billing plan is not available like S.O , How to check the status in table?
    I have refered so many tables but not helping. Since i want to get the uncleared value of accouting document.
    Please help me.
    Regards
    Thenna

    Hi Thenna
    The accounting document status in the document flow is determined dynamically when you display the document flow,
    it's not saved in a specific table.
    Here is the relevant logic:
    LV05CF01 -> form BUCHHALTUNGSBELEG
    IF vbrk-vbeln <> vbfa_tab-vbeln.
       PERFORM vbrk_ermitteln USING vbfa_tab-vbeln.
       REFRESH xbkpf.
       CALL FUNCTION 'FI_DOCUMENT_READ'
        LOOP AT xbseg WHERE bukrs EQ xbkpf-bukrs
                      AND   belnr EQ xbkpf-belnr
                      AND   gjahr EQ xbkpf-gjahr
                      AND   ( koart EQ 'D' OR koart EQ 'K' ).
        ENDLOOP.
                IF NOT sy-subrc IS INITIAL.
      SET STATUS TO 'No items are cleared'
                  l_xdoc_num-status = 'A'. <<<
                ELSE.
                  LOOP AT xbseg WHERE augbl IS initial
                                AND   umskz NE 'A'
                                AND   vorgn NE 'AZUM'
                                AND   ( koart EQ 'D' OR koart EQ 'K' ).
                  ENDLOOP.
                  IF NOT sy-subrc IS INITIAL.
      Set status to 'All items are cleared'
                    l_xdoc_num-status = 'C'. <<<
                  ENDIF.
                ENDIF.
    Regards,
    Alex

  • Billing document for multiple sales orders

    Hi All,
    I am in to ECC 6.0. How can i get single billing document for multiple sales orders?
    Can anyone tell me those configuration settings?
    Thanks
    Patel J

    Dear Jaganath,
    For Single Invoice, for multiple Sales Order, following details must be same:
    1. Sales Document Type for all Sales Order must be same
    2. Payer
    3. Incoterms
    4.Payment Term
    5. Account Assignment Grp - Customer
    6. Billing Date
    7. Exchange Rate
    8. Foreign Trade Data
    Now, in Copy-Control Settings between Sales Order and Billing (T. Code: VTFA - Order to bill copying control), Select your combination for Sales Order-->Invoice;
    and Double Click: Item (from Left-Hand side, Dialog Structure) and Double Click on to your Item Category.
    Here, in Filed: VBRK/VBRP, maintain Routine: 003 - Single Invoice.
    Important: Also, if Sales Orders have different Divisions,
    T. Code: VOV8 - Sales Document Type Maintenance
    untick the Box: Item Division.
    T. Code: VOR2 - Common Division
    Assign those Divisions to Common Divisions.
    Best Regards,
    Amit

  • I need to create a resume on my mac which I can send as an attachment as a word document.  How do I do this?

    I need to create a resume on my mac which I can send as an attachment as a word document.  How do I do this?

    You either buy Microsoft Office, or Apple Pages (which can save a document in Word format), or use one of the free office suites like LibreOffice, OpenOffice, or NeoOffice.

  • Attaching  a MS-word document in the selection screen

    Hi,
    I need to attach an MS word document in the selection screen, if a user clicks on a button the MS word document need to get opened.
    Please let me know how to do it.
    regards,
    Prabhu

    Hi friend,
    Try this simple program...
    REPORT zawi_try.
    TABLES: sscrfields.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN PUSHBUTTON 10(10) word  USER-COMMAND as.
    SELECTION-SCREEN END OF LINE.
    INITIALIZATION.
      MOVE 'WORD' TO word.
    AT SELECTION-SCREEN.
      CASE sscrfields-ucomm.
        WHEN 'AS'.
          CALL FUNCTION 'GUI_RUN'
            EXPORTING
              command   = 'winword'
              parameter = 'C:\a.doc'.
      ENDCASE.
    This might be helpful....
    Thanks..

  • HT202879 how can I open a Word document in Pages 09?

    How can I open a Word document using Pages 09 please? I am trying to open Word documents from a CD using both trying to open in Pages, nd dragging and dropping into the Pages icon in the dock. It tells me, every time, thast the document cannot be opened.

    What happens if you open it in TextEdit or LibreOffice [free]?
    Does it open where you got it from?
    Peter

  • How do I generate a Word document and a PDF from Help files?

    Hi,
    I am new to RoboHelp HTML, and am using version 8.  I updated some Help files, and now I want to generate output.  Here are my questions/ or the process I used:
    To compile the help, I clicked Generate Primary Layout.  Is this correct?  I noticed that the date stamp on the xpj file has not changed.  The date is still from many months ago.  (Why is that?  Should it show a recent update date?)  However, the files that I updated do reflect the dates when I made the updates.  These include art files, an hhp, and htm, js, ldb, pss, cpd files.
    To generate a pdf, I clicked Generate PDF.  I was not able to generate the PDF at first, but then, I enabled macros in Word 2007 (Trust Center Settings > Enable all macros...and clicked the checkbox, Trust access to the VBA project object model), and clicked Generate PDF.  At the end of the generation, I got this error in Word: Microsoft Office Word has encountered a problem and needs to close.  We are sorry for the inconvenience.  The info you were working on might be lost.  Word can try to recover it for you.  I closed the dialog and Word generated several blank documents.  Microsoft Office Diagnostics was run and found one problem and corrected it.  Despite the error message, a pdf was generated.  (If you could give me any insight on why I got the error messages, that could be helpful to know).
    How do I generate a Word document?
    Thank you!
    Erin

    Welcome to our community
    Note that RoboHelp is capable of creating a variety of layouts. WebHelp, FlashHelp, AIR Help, Microsoft HTML Help, JavaHelp, Oracle Help, ePub and more.
    Any of these layouts may be nominated as the Primary layout. So when you generate the Primary layout, you get whatever has been configured as the Primary layout.
    Only certain actions will result in a change to the .XPJ file. The actions are indicative of major changes to the project. So I wouldn't fret the fact that the date time stamp wasn't updated.
    Indeed the Printed Documentation Single Source Layout recipe is what you use to create PDF. Generally what happens is that RoboHelp creates a Microsoft Word document as an intermediate file type, then creates the PDF from that. As you might imagine, there are a host of things that can go wrong during the process. I might suggest that you first get a Word document to generate cleanly. Then once you do that, focus on PDF. I know that I typically gen a Word document and stop there. I just open Word and use Word to create the PDF.
    If you look at the properties for the Printed Documentation Single Source Layout recipe (View > Pods > Single Source Layouts then right-click the Printed Documentation layout and choose Properties) you will see that PDF, Word or both are options at the top of the dialog.
    Hopefully that gives you a nudge in the right direction.
    My fellow Adobe Community Expert Peter Grainge has excellent info on Printed Documentation on his site at Grainge.org. Click the link below for that.
    Click here to visit Peter's site
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcererStone Blog
    RoboHelp eBooks

  • How do I convert a word document into a pdf and then upload it to a web site

    How do I convert a word document into a pdf and then upload it to a web site so people can read it from my
    site with Dreamweaver 4?. How can I do this? Can anyone please help? I'm only a newbie. Thanking you in anticipation.

    First you need to install a means of printing to pdf from word.  I like cutepdf writer ( http://cutepdf.com/Products/CutePDF/writer.asp ).  Once installed you will print the doc in word and under the printer selection you choose pdf.
    Once you have the file you put it in your local site folders and upload it using Dreamweaver.  Be sure to link to it from a page so users can get to it and I would recommend giving the link a target of _black so it will open in a new window (see the properties inspector in DW).

  • How can I attatch a word document to an email that have already been sent to me in another email?, How can I attatch a word document to an email that have already been sent to me in another email?

    How can I attatch a word document to an email that have already been sent to me in another email?,

    Forward the original E-Mail and tap "Include Attachments".

  • How do you recover a word document on macbook pro?

    How do you recover a word document on a macbook pro?

    gwils wrote:
    How do you recover a word document on a macbook pro?
    Just as you do it on a Mac Pro or a Mac Mini.
    What version of Mac OS X? What version of MS Word?
    If you're thinking of the AutoRecover feature, you have to enable it first. If it was enabled, this
    <http://kb.iu.edu/data/ahnd.html#FindingfilesMac>
    will tell you what to do.

  • How do I convert a word document to a pdf document that is protected

    How do I convert a word document to a pdf document that is protected

    Use Acrobat, or possibly CreatePDF.

  • How do I edit a word document that was converted from a PDF

    How do I convert a word document that was converted from a PDF

    To convert a Word file to PDF:
    (1) Use Acrobat XI (File - Save As Other - Microsoft Word - .... )
    (2) Use Adobe's online subscription service "PDF Pack"
    To cleanup a Word file created from the export of PDF page content -
    Open the DOCX, DOC, or RTF with MS Word.
    Perform edits, corrections, etc (cleanup).
    Be well...

  • How do I delete a word document in word 2011

    How do I delete a word document on a MacBook Pro word 2011?

    Use Finder to get to the document and drag it to the trash.

  • How can I convert a Word Document to a PDF Document. The word document is already on my Pc

    How can I convert a Word Document already on my PC, to a PDF Document

    Using
    Adobe PDF Pack
    Adobe Acrobat
    Microsoft Word 2007+

  • HT3739 how do i preview a word document without it going into stack first? I downloaded (legally) microsoft word to this macbook I just purchased last week.

    how do I preview a word document without it going into stack first? I did download (legally) Microsoft Office to this Macbook I bought last week.  I tried removing stack from the dock and the word documents did the same thing, only flew to the top right of my screen instead....

    Hi
    Please find the links given below to call HP technical support.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

Maybe you are looking for