How to attach a security policy to separate webservice?

If i have a WebService with a lot of operations. Is it possible to attach any security not to whole Webservice, but to separate operations only?
EM shows Policies->Attach to -> Webservice. So, is it means - that security may be attached only to all webservice operations in the moment?

Hi and Welcome to the Community!
Since you have balance, and the issue is in your Work domain, you need to work with your server admins, as it's possible they are forbidding (via IT Policy) the ability to do as you desire.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How to add WS Security Policy in OSB

Hi all,
How to add WS Security Policy in OSB tht has username and Password??
Thanks,
Kiran

http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/security/ws_policy.html

How to specify the security policy "Allow access to everyone" for security role in Deployment descriptor

Hi,
I am migrating a web application from Websphere to Weblogic. The web application has a security role defined in web.xml (Use LDAP for authentication).
security-role>
        <description>Authenticated</description>
        <role-name>Authenticated</role-name>
    </security-role>
This role is mapped to a special subject "All authenticated user in appliation realm" in WAS.
In weblogic, I have the following setting in weblogic.xml
<wls:security-role-assignment>
        <wls:role-name>Authenticated</wls:role-name>
        <wls:externally-defined />
    </wls:security-role-assignment>
And after deploy the application, have to manually add a security role and add the security policy "Allow access to everyone" to this role.
I am wondering if this setting can be specified in for example weblogic.xml so just deploy web applicaiton using deployment descriptor, and I don't need write script to do that .
Thanks

Hi,
You need to have Back End support to achieve this. In Back End you need to create two groups . You need to know what joins has to be made for which group (which is more important) and also make session variable for the userrole (with SQL supporting it). In the BMM layer, we need to put the security join conditions in the 'where clause'.
And make a common report. User loggin in with the respective userid will have userrole and joins assigned in the Back end. And they will be viewing the report according to their access.
Hope this will solve your problem.
Regards
MuRam

How to manually create security policy in integrated web logic server

Hi,
I am trying to run a webcenter portal app that uses web services and has security enabled thru policies. I am no expert in terms of web service security and I am encountering this error.
The password credentials cannot be obtained from the Credential Store Framework (CSF). Unable to retrive the csfKey "BASIC_KEY". The csf map "oracle.wsm.security" found in the credential store is being used and the following keys are found in this map...I know this is related to security but how do I define or create this in my integrated weblogic server? The web service I think use the oracle/wss_http_token_client_policy
Thanks
JDEV 11G PS5

Hi,
Found this link http://portal.intelitur.com/webcenterhelp/faces/helppages/main.jspx;jsessionid=GH3XQt2ZfTpLMRXQNytrrmLyfBh9DZR0nhjvwWgw8knck3FvjQ0J!1175791655!1369545269?locale=es-ES&vtTopicFile=wcadm%2Fwcadm_security_wss004.htm&config=OHW+Servlet&_adf.ctrl-state=17i2c8oad3_4
although I am unsuccessful
createCred(map="oracle.wsm.security", key="BASIC_KEY", user="user", password="user1", desc="Keystore key")when I execute this code using WLST, I am encountering below error
Traceback (innermost la
File "<console>", lin
NameError: createCred..what could be the cause?

How to override default security policy?

I know that I can edit the java.policy file in the JRE's security directory...
Is there a more dynamic way of doing it by code? It's a socket problem that I'm facing when trying to open a output stream from a URLConnection.
Anyway of saying allow access to server www.b.com at port blah...
Anyone get what I'm saying?

Please, can anyone point me in the right direction? Just even some clues will do...

Editing security policy in Falsh Player 10

I have an ActionScript project that needs to receive ActiveMQ messages. I have connected to ActiveMQ successfully. I know this because the ActionScript project throws and exception if I shut down ActiveMQ. However, I cannot receive messages from ActiveMQ. Could this be because of security policy issues with Flash Payer 10? If so, can anybody tell me how to set the security policy to allow these messages? Thanks!

I have an ActionScript project that needs to receive ActiveMQ messages. I have connected to ActiveMQ successfully. I know this because the ActionScript project throws and exception if I shut down ActiveMQ. However, I cannot receive messages from ActiveMQ. Could this be because of security policy issues with Flash Payer 10? If so, can anybody tell me how to set the security policy to allow these messages? Thanks!

Attaching Security policy to Database Adapter

Hi,
Can anyone please tell me how can i attach security policy to a database adapter in soa 11g?

Hi,
Can anyone please help me how can i attach policy in adapter levels?Suppose if i want to do an encryption in the beginning of the SOA process and finally at the end of process i have to decrypt the data and then insert it to the DB. But i didnt find any way to attach the decryption policy to DBAdapter level.Do we have any option to do it?

Testing Security policy attached web service

Hi,
I am facing a scenario where I need to test our web service ( which has security policy annotation ) in the similar way how the ( external ) customer would do , i.e with security policy attached. So is there any way to test this scenario..?
though there are some SSSP envts to enable this security policy to the soap requests, we want to test in all envts irrespective of oracle infrastructure ( as the customer does).
Thanks,
Praveen S K

We do most of our external testing of this type using soapUI. This allows us to sign/encrypt messages or provide a username/token. This also allows the creation of repeatable test suites with validations built into them.
Thanks,
Adam DesJardin

How to pass Username from OWSM Security policy in Oracle Apps Adapter .jca file

My BPEL process uses Oracle Applications Adapter. The following is the .jca file for the Adapter. The Username is initialized statically to "sysadmin" when I created the Adapter.Is it possible to pass in the username from the OWSM Security policy for the username value below? If so how to do? I appreciate your response.
<adapter-config name="EBSAdapter" adapter="Apps" wsdlLocation="../WSDLs/EBSAdapter.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory UIConnectionName="EBS1" location="eis/Apps/EBS1" UIConcurrentPgmName="" UIOracleAppType="DBOBJECT"/>
<endpoint-interaction portType="EBSAdapter_ptt" operation="EBSAdapter">
    <interaction-spec className="oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec">
      <property name="SchemaName" value="APPS"/>
      <property name="PackageName" value="INTG"/>
      <property name="ProcedureName" value="GET_USER_PROFILE1"/>
      <property name="IRepInternalName" value="PLSQL:INTG:WEBCENTER_GET_USER_PROFILE1"/>
      <property name="Username" value="sysadmin"/>
      <property name="Responsibility" value="System Administrator"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>

1. Go to Invoke activity
2. Click on Properties tab.
3. click Add
4. Add this property "jca.apps.Username" and map it with either variable or expression.
5. Populate variable defined at previous step with some valid username value at runtime.
hope this helps.
Regards,
Karan
Oracle Fusion Middleware Blog

How to set security policy programatically

I have a RMI application with front end as JSP. When I try to run the application, it can't connect to RMI server because I am not setting the security policy to the file that I want to set it to. So I tried programmatically using System.setproperty but it was unsuccessful.
Please let me know how can I do it.
Regards
Nikhil

Just a thought here. If you could set the security policy for a JVM programmatically, then you would be defeating the main purpose of "separating the application from the security system".

How to migrate JPS application security policy to weblogic 10.3.1

Hi,
How do I migrate my application security policy (defined in the jazn-data.xml in my application ear file) to the system-jazn-data.xml in weblogic 10.3.1? The [previous solution provided here|http://www.oracle.com/technology/products/jdev/tips/muench/credmig111100/index.html] by Steve Muench seems to work only for weblogic 10.3.
Thanks in advance!
Edited by: Qinyan Leong on Nov 20, 2009 4:33 PM

In 11gR1 (which uses WLS 10.3.1) onwards the application policy specified in the application's jazn-data.xml is automatically migrated upon application deployment to the domain policy store (which could be system-jazn-data.xml or OID).
See chapter 7 of the Fusion Middleware Security Guide linked here.
http://fmwdocs.us.oracle.com/doclibs/fmw/E10285_01/core.1111/e10043/addlsecfea.htm#CFHFAIGE
Let me know if you run into any issues with this.
Edited by: vishukla on Nov 24, 2009 2:46 PM

How do I deselect global object security policy?

I'm trying to deselect the global object security policy on my iPad mini. How or where do I do this?

Since the global object is not supported on the mobile versions of Adobe Reader, there's nothing for you to change. Is someone/something telling you that you need to?

How can I attach a photo as a separate file to an email? (I have tried several of the tricks suggested here and they don't work for me)

I cannot work out how to attach a photo as an attachment to an email. I have tried several times today using different methods (ie, changing the email to plain text, dragging the photo from Iphoto over the mail icon, emailing directly from Iphoto), but none of them work. Everything seems to just produce an email with an embedded photo. Any ideas?

Is this the first time your friend receives e-mail from a Mac user?
It is certainly the first time I have sent her emails from a Mac. Not sure if she has ever received messages from another Mac user before.
You've sent her e-mails with pictures before, but only now you're having a problem
Yes, that's correct.
Mail.app offers two settings you can try to manipulate: Edit > Attachments > Always send Windows-friendly attachments, and, Always insert attachments at end of message
I had already tried that and it didn't work.
e-mail client your friend is using
I will find out on Monday when she goes back to work, but I wanted to look at solving the problem firstly from my end.
very likely you're dealing with a problem others have dealt with
Yes, very likely - I searched the site before I posted my own question, and there were quite a number of posts on the same issue.
Again, thanks everyone for your help. Hopefully we can find a solution. I am not making you all grope in the dark just to annoy you!!! I'm just a new Mac user trying to work something out. I am sorry if it seemed otherwise.

How do I resolve this error in Safari Your page is blocked due to a security policy that prohibits access to Category Remote Proxies"?

I'm trying to access several pages and keep geting "Your page is blocked due to a security policy that prohibits access to Category Remote Proxies" After going over all my security stuff I just can't find where I would correct the error.
Is there anyone who could help me?
Thanks
Fr. Gary

very strange,
1. check time and date on your computer
2. reset network configuration, make sure there are no proxy servers and you get DNS from your router not manual
3. Reset certificates database
Go to Terminal (Applications>Utilities)
sudo rm /var/db/crls/*cache.db
(you will be prompted for your password)
and reboot the computer
post back

How to create a custom java client Security Policy File?

I have a stand-alone java client which invokes a .NET WSE 3.0 enabled web service. The web service SOAP header requires username token to be passed from my java client.
Could some one kindly provide a sample of a client-side Security Policy File?
Your help is very much appreciated.
Mike

This is still a workaround...
But if you put checks on all your forms to see if the user has accepted the terms (assumes there is an attribute tracking this) then you can redirect the user to the terms/conditions forms. Still not spoof-proof, but it would be bookmark proof. (and a pain if you have too many forms)

How to attach a security policy to separate webservice?

Similar Messages

Maybe you are looking for