How to attach audio back to video

I'm sorry again for maybe simple questions. I know how to detach audio from video. But after working in the audio clip, how do I put it back (attach it) to the origninal video clip. There is really no suggestion in the help function.
Second question. After I've detached audio from video, how do I unlink them from eachother so I can move either audio or video seperatly to another part on the timeline. Thx again, Pim

If the audio is connected to the video and you want to move the video only, Opt-Cmd click on the edge of the audio underneath another clip to attach it to another clip before you move the video. Or, if there's a lot of audio use Opt-Cmd-up arrow to lift the video out if the primary storyline so it's not connected to the audio, then move it anywhere you want.

Similar Messages

  • Nokia n8 How to switch audio tracks in video playe...

    How to switch audio tracks in video player? and How can I connect an external audio track playback video?

    Re: Nokia N8 how to reset to factory settings [ New ]
    ‎2013-01-16 23:06
    Hiiii i hace the same problem i dont have pasaron to hard reset my Nokia 8 and i have a big problem, i cant maje calles , or go to the Home menú, or use wifi, dial aytihing I been having that message saying that there no memory and u have to delete some data, since then just menu screen it works but nothing else please help
    HI everyone! I also have the same problem as per above. Please help! Thank you!

  • How to get audio back into iMovie in sync

    I have an iMovie project made up of around 40 clips. I want to adjust the audio "on the fly" because the iMovie normalize does not work across clips (and none of the work arounds posted work). Not to mention the rubber band from previous iMovies has been taken away. I know how to extract audio from a QT movie and open it in Logic Express or Garage band to adjust the sound. But how do you get it back IN to the original movie and be in sync? I tried it and the audio came back shorter. I could shoot whomever at Apple removed the rubber band audio adjustment from iMovie. That was an inexcusable and callous move. How do I get the movie back in place after I've adjusted it? Thanks.

    You cannot sync anything back to the camera roll.
    The camera roll is where pics/vids are stored temporarily until you get them imported into your computer. Camera roll is not a good place to "store" pics/vids. You should always import them as soon as you can and back them up so you don't lose them.
    You can then sync them back to your photo gallery (pics) and your ipod video section ( for videos).

  • How to synchronize audio track and video when transmitting by RTP

    since the audio stream and video stream are transmitted separately on the network even if in a merged data, how to synchronize the audio stream and video stream at the receiving end ?

    camelstrike wrote:
    Hi everyone!
    I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
    javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
    In JMF API Guide I've read:
    "2. Determine which Player object's time base is going to be used to drive
    the other Player objects and set the time base for the synchronized
    Player objects. Not all Player objects can assume a new time base.
    For example, if one of the Player objects you want to synchronize has
    a *push-data-source*, that Player object's time base must be used to
    drive the other Player objects."
    I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
    Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
    If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

  • How to add audio from a video while recording.

    Hi,
    I want captivate to recognize the audio of the video when recording a video demo. I know that it is possible in captivate 6.1 but not sure how. It sounds lame but I am a beginner.

    Hi there,
    Welcome to Adobe Forums.
    You can do this by selecting the System Audio option on the recording window. Please refer to the below image:
    Hope this helps!
    Thanks!

  • How to fix audio  of a video captured from DV output of camcorder using Adobe Premiere Elements 8?

    Hello,
    I purchased Adobe Premiere Elements 8 about one week ago.  I installed it and everything seem to work well in my first project.  I am new at editing videos but I was succesful in testing it by loading an existing video file in avi format from my computer and then doing some very basic editing (I splitted 2 scenes and added a title). 
    After my first succesful project (described above) I started a brand new project. Here, I want to capture a one hour video  from the dv output of a video camera. So I connected the camera to the PC and then started adobe elements 8.  Before starting the capture I only checked the boxes that said "capture video" and "capture audio" (the other 2 boxes that said download to timeline and autoanalyze were left unchecked).  After that I started the capture process.
    After the video capture was completed, a small window opened at the bottom saying that a PEAK FILE was being generated.    After the peak file generation finished, I looked at the captured video.  The video looked perfect.  However the audio of the video was too fast. By this, I mean that the voices of the people in the movie were like they were speaking at more than twice the normal speed.  Or to explain it in a different way, they sounded like the  chipmunks.
    So now I come to the question of this thread I started.  Is there a way that I can fix the audio part of the video I captured?  I will appreciate any help on this. Below I listed a few additional details in case this is needed.
    Thanks,
    ronel_8
    PS.  Here are some more details about my system:
    1) Operating System: Windows XP
    2) I am capturing the video on an external drive with 40 GB of available space. The external drive is connected to a PC via a USB connection.
    3) Computer CPU: 2.4 GHZ
    4) Computer RAM: 1.25 GB
    5) Video tape is about one hour long.

    Hello Bill and Steve,
    Your responses are very helpful.  Although I was not able to fix the problem yet I do seem to think from what you both say that my system may be too slow to capture the one hour video. In any case I will copy below more details about the system as you requested:
    1) Results from running Gspot:
    The audio section of the Gspot window was blank. That is, no information was there.  The File and Container sections say:
    File Size: 12.6 GB
    Note: 7.63 GB unneeded bytes at the end of the file
    DV Type1 AVI
    2) I did run the Gspot on another good avi file (captured to the PC with same camcorder) and says:
    Codec PCM Audio
    32kHz 1024 kb/s tot (2 chnls).
    I suppose these are the audio settings from the camera.
    3) Yes, I am capturing video from a miniDV camcorder (JVC GR-D70U).
    4) I did not defragment the external drive prior to capturing the video with the audi problem.  So I will give that I try and see if it solves the problem.
    5) The external drive I am using is formatted to NTFS.
    6) The computer is a Dell Dimension 2400, CPU: 2.4 GHZ, RAM: 1.25 GB
    7) HDD Size=74GB and 11 GB of free space.  But I am downloading video to external drive that has 60 GB free space.
    One last piece of information that may be useful.  If I open the AVI file (that I captured with Adobe Premiere Elements) with Windows Media Player, the audi sounds good.  However if I open it with Adobe it has the problem I mentioned in my previous e-mail.
    I'll aprreciate any further hints.
    Thanks again,
    ronel_8

  • How to extract audio from a video clip

    I am editting a video, and I need to extract the audio from a video clip. On the old iMovie it was really easy, all you had to do was press apple K I think. Thanks in advanced for your help.

    Select the clip in the sequence.
    Then command-L to unlink the clips.
    Then select the audio and delete.
    As a suggestion, two things:
    1. Explain what you want to do. If it is delete the audio, then that is different than extracting the audio;
    2. Do a search in the pdf manual in the help manual

  • How to extend audio from a video clip over an adjacent still image

    I'm in iMovie 11.  My project looks like this: video A, transition, still image B, transition, video C.  I want the sound from video C to start playing while still image B is on the screen.  I tried following the iMovie 11 help instructions for extending a video clip's audio.  I click on video C and open the precision editor.  From there I can grab video C and move it back so that it overlaps with the still image, but all that happens is the still image still shows up, without sound, and video clip C starts in the middle.  The help instructions seem to indicate that I should be able to drag only the audio and make that overlap the still image, but it's not happening.  Either the video and audio move together, or nothing moves.
    When I try detatching video C from its audio, I just end up with a big mess because later the audio and video don't synch up.
    What am I doing wrong?

    I am having the same challenge... any tips here would help me out in a big way. I recorded my boss tdoing a training session and now I would like to have the powerpoint slides change as necessary - but I want the audio to remain. I would love to just get the slides to change rather than back to full before bringing up the next slide. Jim, if you come up with anything, let me know. I have VC2 pro.

  • How to make audio (within a video) background music?

    Hi: I have Adobe Premiere Elements 7.0. I have video of a guy singing that is three minutes long that I would like to use as the background music for a video montage. The video montage itself is about 3 minutes as well. I would like to start the video montage with the guy singing, then make the rest of the montage have just the background music of the guy singing (without the video of him). How can I do this? Thanks.

    That's how I'd do it, too.
    Another option might be to just plop the montage on Track 2 at the appropriate starting point and not do anything with Track 1 (the guy singing). The video from Track 2 would be used instead of the Track 1.
    Not sure what would happen with the sound though - don't remember if Track 2 audio overlays Track 1 or if they get mixed
    Also not sure what the OP wants... is the guy singing supposed to be "background" as in you can still hear the montage audio with the singing as light background, or whether the guy singing is the *only* audio.

  • How to add Audio Formats and Video Formats in one movie?

    Now that FCP X will not allow different settings how would I change the Audio Format and the Video Format to one movie in Compressor 4?
    When I change the Audio to ACC I have a sound file and when I change the Video Format to HD 720 I get the movie but with the original sound.
    Any help is always appreciated.

    Sorry for this one also.  Just finally searched the Inspector windoe in Compressor 4.  It is already there.

  • How to delete audio with deleting video

    I have a MacBook with OS X 10.9 and iMovie 10.0.1
    I just received a homemade dvd and want to edit the audio but not the video - is there a way and how - please, explain step by step as I am somewhat computer challeged and just learning about iMovie's capabilities.
    Thanks,

    pbc pt
    You need to use audio cables left and right from the dock or headphone jack to audio input on tv, as s-video cable does not carry audio signal. If you are using the Apple A/V kit or cable hook up is simple red to red... white to white yellow to nothing as you are using S-video but if a non-apple A/V cable the plugs may have to be swithced to yellow to red....white to white and red to yellow (or in your case red to nothing as you are using "s" video.
    Rick

  • How to edit audio without disturbing video

    Hi:
    I have working with FCP 6 on another office Mac and got 7 for my iMac. On the other machine, I could edit audio (cutting, trimming, deleting, etc) without disturbing the video clip tied to it. However, now I cannot. If I highlight the audio track, I also highlight the video track. Any cutting or trimming I doto audio results in a trim or cut of the video.
    How do I make it a default that these two tracks should be treated separately?
    Any help would be really great.
    Thanks.

    This looks like it will work. However, is there anything in settings to, by default, only select the one audio or video track that I want to edit rather than selecting the audio or video tied to it too?
    Thanks

  • How to put audio with s-video cable

    heyas. i am using a svide cable and i have no sound. then i put another cable in the s-line out (the one i use with my amplifier and it is ok)and cnnectect to the tv but no sound! i have all the updates. tahnks

    pbc pt
    You need to use audio cables left and right from the dock or headphone jack to audio input on tv, as s-video cable does not carry audio signal. If you are using the Apple A/V kit or cable hook up is simple red to red... white to white yellow to nothing as you are using S-video but if a non-apple A/V cable the plugs may have to be swithced to yellow to red....white to white and red to yellow (or in your case red to nothing as you are using "s" video.
    Rick

  • How best to export back to video camera dv tape?

    I know iMovie no longer has the export back to tape option in 09 version. But, there must be a good way to do it anyway? Does 09 allow me to export to DV (MyMovie.dv)? If so, then I guess I could take that exported file and import it into my old iMovie 6, and then export from there back to a DV tape via firewire. If someone knows a better way, the let me know.
    Thanks
    bkabat

    You can avoid all video editors by using an app called SimpleVideoOutX:
    http://developer.apple.com/mac/library/samplecode/SimpleVideoOut/Introduction/In tro.html
    Just download the SampleCode archive, extract the archive and look for SimpleVideoOut X.app. Just drop the video on the app icon to launch the app.
    It has been around for MANY years, but not well known. This is a free app created to do exactly what you want. Caveat is, to go to DV, the video file can NOT be higher than DV resolution, or the screen with just show black on the DV camera. But it will work with any SD, or lower, resolution video file that Quicktime will play back. I have watched many videos on my TV this way, and it is MUCH cheaper than an Apple TV, with out the format issues.
    You can select DVCPRO HD, Digital Cinema Desktop and FireWire as the output options. For DV, select Output=Firewire, and Mode=Apple FireWire NTSC.
    There are a couple other option available at the bottom right of screen to play with, but generally, the defaults work for the majority of cases.
    For extensive detail on its use, check this article:
    http://www.oreillynet.com/pub/a/oreilly/digitalmedia/2004/12/22/video_out.html
    Enjoy!!

  • How to extract audio from home video

    Hello all,
    I am trying to compile an iMovie and I imported a home video shot with my Sony DSC T7 and when iMovie imports it. There is no audio!??! Is there a way for me to use the power of my Mac OS X and extract the audio before I import and then bring both into iMovie seperatly? Or is there a way to bring it into iMovie with sound? I'd appreciate the help. Thanks,
    Lorne17

    iMovie should import the audio/video together. Maybe you should re-post your question in the iMovie forum. It's possible that someone there had the same problem and knows the solution.

Maybe you are looking for