How to attach Query deletion to a transport request

Hi All,
I deleted a query in Dev and need to transport it all the way to Prod , how should I attache deletion of objects to transport request ?
Regards,
Shweta

Hi Shweta,
Generally for any query changes we create a transport request first and then record the changes in that trasport request. This is created in Transport Connection tab of RSA1 screen. There you need to provide the transport request number for BEx query changes and then save it. Afterwards whatever changes are done in the query gets recorded in that TR and finally we transport the TR.
Check if any transport request is already created for the Query changes in your system. If its there then just transport that request.
Navesh

Similar Messages

  • How to delete items in transport request

    How to delete items in transport request.  I have quite a lot data to be deleted.
    I click on TR5001. Then click to drill down to Table contents
       C001 
                Data A1
                Data A2
                Data B1
                Data B2
    Placed my cursor on Data A1 and tried deleting Data A1 by clicking on the item and right click then select delete but not able to delete with message "Message no. TK705, A request, task or object could not be deleted because the cursor was not positioned correctly".  . 
    Any clue to the error and any recommded solution?
    I just need to transport Data A2, Data B1 & Data B2. 
    Regards
    PSK

    Hi There,
    I dont have access to SAP as of now, Can you please reffer to these links and give feedback,
    [cursor Page|http://books.google.co.in/books?id=ASekwAiAXdMC&pg=PA250&lpg=PA250&dq=Positionthecursoronarequest,task,orobjectSAPtransport&source=bl&ots=BS7c1uNH0z&sig=dQZNp7UuXvqyHT9-otTbip8iF8U&hl=en&ei=_NBESr7CDsmGkAXX8MmsDw&sa=X&oi=book_result&ct=result&resnum=1]
    [SAP help|http://help.sap.com/saphelp_sm32/helpdata/EN/b6/b40613a44411d1846d0000e8a57770/content.htm]
    Thanks,
    Raja

  • How do I find from which terminal transport request imported to PRD

    Hi Experts,
    Let me know how can I find from which terminal transport request imported to PRD
    Thank you in advance.
    Regards,
    Raj

    Hi Raj,
    Please find the answer for your question  in below discussion.
    How to find out workstation of a transport request created
    I hope it will help you
    BR
    AKJ

  • How to include .txt (notepad file) into Transport Request?

    Hello,
    We are configuring the SolMan Service Desk (SPS15) and the IMG says that we need to activate BC sets and we did that.
    There is a note 898614 (Service Desk-BC sets) states that for the installation we need to Copy the contents of the file Piecelist_Service_Desk_Initial.txt to the transport
    request.
    Can anyone help me the procedure how do we go about this activity and if i do this on the Development Client can i move this to the Producation too.
    Thanks and Regards,
    Rao
    Edited by: Rao on Jul 28, 2008 3:56 PM

    Hi,
    You just need to open the text file and copy the entries into the transport request.
    Below is the procedure on how to copy the entries into a transport request.
    Goto trx SE10 --> Create a transport request --> Double click on the request --> selcts tab 'objects' and paste the entries there.
    Pl reward points if it helps.
    Thanks,
    Naga

  • How could I see who imported a transport request

    How could I see who imported a transport request (not who is the owner)
    In import monitor I can see it but only for current day(or I can extend that period)

    goto SE01 ..
    enter the transport request ...display
    In
    Object List of Request
        Comment Entry: Released
            EC6XXXXXX 20080325 190541 USER <-- person responsible
    You'll have the person who released(USER)

  • Is it possible to delete a released transport request

    Hello
    I wander is it possible to delete a released transport request. Is it possible to delete a transport request with released only an task

    You can but you have to chnage status of the request:
    Use transaction SE38 or SA38 and run program: RDDIT076
    Set your request number and run the program
    After request is shown double click on it
    You should be able to change status from R to D
    And now, you can delete the transport for example in transaction: SE10...
    Help on ABAP: Few Tips for Transport Request Manipulation

  • How to delete infoobject by transport request?

    Hi experts,
    I want to delete infoobject from productive system by transport request without deleting this infoobject from development system.
    Is it possible? How can I do this?
    Thanks!

    Hi Denis,
    Take an approval to open the production system. While you delete the infoobject  , it will ask for transport request to save under.
    Regards,
    KANTH

  • How to delete objects in transport request

    Hi,
    I have several different questions in Transport requests and need advice:
    1. I need to transport an Infoobject and I chose only necessary objects in grouping and I don't see any app components in the request before created, but in SE01, under the request id I see app components and infoareas listed. A bunch of them, which I don't need to transport. Why this happens?
    2. I want to know if there is a way to delete all the app comps in one shot from the request before it is released?
    Thanks.

    U might have selected 'Collect automatically"
    I suggest u, to delete complete request ( first unlock it in SE03... then delete it from SE09)
    Recollect that InfoObject in a new request, by selecting only necessary object & Collect manually
    In this way u will have less confusion

  • How to delete role through Transport Request

    Hi,
    when I am deleting Role it is Not asking me for transport request ..this is what i needed.can anybody solve my problem
    regards
    Gaurav

    Hi,
    Please check if your role is already locked under some Transport request. If so it wont pop up any TR.
    If it is locked under some TR, make sure you detach it from the TR and try again it will pop up a TR screen
    Please revert in case of issues
    Regards,
    Pramod

  • Problem while deleting objects in Transport request

    Hi  Guys,
    I am working on some object .It has some tables ,RFC's etc
    If I make changes to some of the objects the next day aging the same object is attached with the same name in the Transport Request.Also if i try to delete one out of it,I get the folllowing message & I am unable to delete it.Please guide on both.
    Message: "Object entry exists more than once. Sort and compress first"
    1. why same object gets attached to the request again?
    2.How to delete the duplicates entries of the object

    Hi,
    If more than one user has worked on the same object, then it would be included in the TR twice.
    Right click & select SORT COMPRESS, then try to delete.
    Best regards,
    Prashant

  • Unable to collect the changed query elements to a transportable request

    Hi All,
    I had saved the query changes to dummy request, now I have to collect the changed qurey elements in a transportable request. This I am doing in the transport connection tab in rsa1. Now I want to collect only the changed elements of the query, & not all the elements. I have made (changes) restriction to a key figure inside the keyfigure collum. Now when I try to make a collection of this to a transport request - I am unable to find it under the query elements in the transport collection.
    Pls advice how to collect it in a transport request & move it?
    Thanks & Reagrds,
    Shreesh.

    Hi Shreesh,
             It may be collected under default request. You can collect changed objects by releasing default request.
    aftre releasing default request
    go transport connection(TX-RSOR) object type -
    >query elements -
    > Query--> collect your query.
    Grouping option as only necessary object
    then click on "Package"
    then check for your objects if not checked against your query elements(which you want to collect), plz check. at the same time check for your query name it should also be checked then only query will carry the changes.
    Hope this will help you.
    Thanks,
    Vijay.

  • How to add function group entry in Transport request...

    Hi
    I had a function group in which I had 4 function modules. I deleted one of the FM and hence in my Transport request, its entry was included. Along with that the function group was also included.
    I deleted that function group entry by mistake. Now I want to add back my function group into the transport. How do I do that ?
    thks

    Hi,
    Please follow below steps:
    1) Go to SE01
    2) Click on create New workbench request and give desc once popup appears, Click Ok
    3) Now open the trasport in edit mode
    4) Add
    Program ID - R3TR
    Object Type - FUGR
    Object name - Name of the Function group
    >note that if you tranport Function group all the latest Function modules in function group along
    >with screens will be included in the transport.
    Regards
    Shital
    Formatted by: Vijay Babu Dudla on Apr 25, 2009 5:08 AM

  • Delete entry in Transport  request

    Hi all,
            I have created an Table in a package with a transport request number. I copied the table to other name and deleted the previous table. I am deleting the Emtry in the Transport Request. But it is showing error as   OBJECT ENTRY EXISTS MORE THAN ONCE. SORT AND COMPRESS FIRST.
    How to delete the Entry?
    Thanks & regards,
    Vishnu

    Hi Vishnu
    Place ur cursor on the req no, go to rquest/task->object list->sort and compress, u can delete the entries after this. When there are two requests of the same name , the transport organizer asks u to sort and compress.
    Hope it helps
    Rgds
    Sameer

  • Deleting objects in transport request

    Hello,
    I made the changes in InfoCube in developer system and included those changes in a transport request. I didn't release this transport. Then I realized that those changes must be reverted.
    I know what I have to do. First of all I need to change manually InfoCube and then remove objects from transport request.
    I have doubt about deleting objects. In transport request there is a lot of object which Iu2019ve never changed such as InfoObjects and InfoArea.
    Can I safely remove these objects? Why these objects are attached to my transport request?
    I checked them and last change was made by another user.
    Thank you for your time.

    Hi,
    I don't think there is any version comparison available with target system like R/3 reports. You will manually have to compare the properties.
    If you have lot of objects and do not want to loose any changes then you can even think of reverse transport from production system to development system for selected objects.
    Now about locking the remaining objects you can open the TR through SE09 in change mode and then select the required items and from the tool bar you can directly lock all the items in single go.
    Regards,
    Durgesh.

  • Attaching Holiday Calendar to a Transport Request

    Hi experts,
    We are rolling out individual countries to our existing system in ECC 6.0. Therefore a lot of new holiday calendars are getting created. The existing option that is there in the system makes us transport all the calendars together to Production system.
    Since we already have old calendars in place and do not want to risk them, we wish to attach only new calendars to a transport request and move them to production individually. Is it possible? How can this be achieved?
    Thanks in advance.
    Peeyoosh

    Hi Peeyosh,
    Can you tell me how did you achieved.I do have a same Scenario.
    I thought in following way to achieve the btransport of individual calendars.
    I have included the Transport thru SCAL in a Workbench Request.
    I went on to SE10 and double clicked on the Workbench Request in chnage Mode.
    Then i double clicked over the tables.
    THOC ,THOCD , THOCI ,THOCS ,THOL ,THOLU,THOCT ,THOLT .
    Then in each i limited with the Required Calendars,public Holidays to be transported.
    Like i have entered the Calendar id's.
    Do you think this is right approach.I havent tested this option yet.
    Can you anyone suggest me on this.
    Regards,
    Nachy

Maybe you are looking for

  • Runnig forms in oracle 10g after  migrating them from oracle 6i

    Guyz ....i have developed forms in oracle 6i and when i presented them to the my manager he says that he wants them to be web based.....arghhhh.!!!!!! shud have told me at the beginning itself....anyways i downloaded the forms 10g from oracle website

  • 3.0.9.8.2?

    Has the 3.0.9.8.2 patchset been released yet? If so, on what platforms (I assume it is generic)/DB version (8.1.7.1 -> 8.1.7.2.1?) is it released and what issues does it address? Also, does it introduce any other featurettes? ..and the patch number w

  • DEMO LICENSE IN UCCX 10.0

    Hi, I tried to use Demo License for UCCX 10.0 which is in installtion Disk but I got the following error: "The license cannot be added because, either the license config repository cannot be accessed or the license is invalid. Please specify a valid

  • Album thumbnails on My Albums page appearing cropped

    Hi, I'm hoping someone can help with this. I'm trying to build a website using iWeb 08 and am using the My Albums feature to showcase samples of my work by type. However, for some reason the thumbnail that is being displayed for each album that I dra

  • IMac wakes from sleep by itself after security update 2010-001

    Since installing last weeks security update 2010-001, my iMac has suddenly started waking up when it should be asleep. Now I've had Auto Sleep problems with my iMac before, but this problem of finding my iMac running when I left it asleep started imm