How to attached CLAD logo

my dear readers,
I might classified myself as the least person for not knowing this but since I am "newly CLAD passer", (I just received the result TODAY!) then it will be my 1st time to have a logo here in the discussion forum.
I know it will be a big responsibility for being certified (since they expect us to be better than average), but this is how CLAD passer became more responsible in their chosen career, and a challenge to be a better programmer each passing days.
feels good to be CLAD certifified, but feels better than best to the undeserving ones'!
with all of this introductions, I just want to share my hapiness here in the forum.
Please dont forget teach me how to include the CLAD logo. haha.
thank you and regards,
ivel
Ivel R. | CLAD

Hello guys,
based on what i understand, this was done in LV programming code? thanks for the additional very helpful hints. for now, I just want to customize my picture here, and to know how to attach some logo in the footer of my message (just being curious how others have done this). my question points out how to customize my signature and image in this forum (unrelated to LV codes).
but if your messages are dealing exactly on what i need, please assist me on further details. my bad.
For clarity, i attached two files that locates where i want to put my logo.
regards, 
ivel
Ivel R. | CLAD
Attachments:
3.jpg ‏16 KB
1.jpg ‏25 KB

Similar Messages

  • How to attach a logo to a selection screen?

    I needed to show the logo on the selection screen of a report.
    So I went through several postings on this topic, created and uploaded the logo via OAER against the PICTURES object.
    Per the posting, it tells to pass the value C:\logo.gif' as the url
    I did so - but the logo does not appear on the screen.
    So I went thorugh some demo programs - the demo programs are looking for entries in wwwparams table and are hard coding the object id while fetching these entries.
    I looked for my entry in the wwwparams table, but nothing got updated into this.
    Let me know if I am missing anything..
    Thanks,
    Ven

    Hi,
    Please check this thread..
    Picture in selection screen
    THanks
    Naren

  • TS1506 In most of my email attachment the logo ( Mimi attachment ) show and I can not open that attachment , why and how to solve this problem ??? iPad 2, iOS 7

    In most of my email attachment the logo ( Mimi attachment ) show and I can not open that attachment , why and how to solve this problem ???
    iPad 2, iOS 7

    When did this start?  What was the last thing you changed before problem started?
    Have you tried sending the attachment from a different account.  Have a friend send you an attachment. Get a gmail account.
    Send the email with attachments to two different accounts one to your ipad and the other to a gmail account in a web browser and not on an iPad.  See if you can read the ones to the gmail account.
    You did reboot your ipad?
    Standard stuff for ipad.
    http://www.my-iguru.com/ipad/ipad-hints-tips/ipad-viewing-saving-email-attachmen ts.php

  • How do I attach a logo to my ipad and iphone email signature?

    I can only find a way to type a signature for my ipad and iphone email. I need to attach a logo. Does anyone know how to do that?

    Not in the stock mail app, not a feature. Look in the app store for an app that will do this.

  • Would lIke to know how to add an Logo to a Local Catalog in iProcurement

    Here is My Requirements:
    I have created a Local Catalog in iProcurement. By going to eContent Manager...one has the ablility to create a logo and attach it to the local catalog.
    I did attach a logo from a url address. And I am able to see logo but the logo is to big.
    So I have resized the logo and saved it to my desktop. But when I save the logo address. It does not appear.
    If anyone has gone thru this process...please what steps I am missing.
    Thanks.

    Hi Bichillo,
    I posted an example here.
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=50650000000500000014570100&HTHREAD=000087828&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
    It demonstrates how to do what you are asking.
    I do not mind you laughing at the code.
    Have fun!
    Ben

  • How to include a logo in sapscript

    how to put a logo in sapscript and how to attach it with the tp

    Hi,
    U have a pust button Text Elements if u click on it, it takes u to the editor where we write code in script.
    There follow the menu path
    Insert ---> Graphics
    Now u get a Pop-up  Include Graphic . There u have two Tabs. In that select the Tab Stored on Document Server. Select the radio button Black and White or Color depending on ur requirment.
    Give the name of the logo which u what to insert. If u dont know then press F4 then u get the list of logos which are present on the application server.
    Best regards,
    raam

  • How to attach a image in the transaction

    Hi Experts,
    How to attach a bitmap immage in the Z transaction.
    I have uploaded the image through the transaction SE 78.
    Sturggling how to attach it to the transaction and the to the transport request.
    Thanks in Advance
    Irfan Hussain

    Hi Irfan,
    Standard SAP images which are used in Scripts stored in One table (that table is Cluster one).
    and ENJOY SAP LOGO are stored in different place.
    Run the Transaction OAER
    CLASSNAME   PICTURES
    CLASSTYPE   OT
    OBJECTKEY   ENJOY
    now you can see the Enjoy logo, and this is another way of uploading the images(of any type).but these are used in ALV"s etc(not in SAP scripts).
    Regards
    vijay

  • How to attach and run std payslip available through tcode HRFORMS

    Hi all,
    Need to have much data along with graphics on the payslip. This includes Leave data(days paid, LOP, Payroll days, etc.), gross salary break-up, Year-to-date details, Tax details(line items), Standard Salary components, company logo, custom messages, etc. on the payslip. We are running India Payroll on SAP 4.7.
    <b>Wanted to know how to attach and run standard payslip available with tcode HRFORMS in place of the one we have with tcode PE51?</b>
    Your help will be <u>gratefully appreciated and rewarded</u>.
    Thanks in advance

    can u tell me how u manage to do this

  • How to attach multiple file in one mail

    Hi,
    I've problems with sending multiple files via Gmail account (Ipad version)  When sending the photo or video, I've to just click the photo and choose send to mail one by one. Any simpler way?  Sometimes i did sent both mpg and jpg but the reciepient didn't see any attachment too
    Anyone can help advise how to attach different file (doc, video, photo) in one mail will be a lot appreciated. Thank you so much

    You can attach multiple pictures to an email on an ipad2. Don't know about original iPad.
    Choose a photo or take a screen shot (hold down home button and button next to volume control at same time--screen shot now will appear in photos).
    Go to photos and edit your picture or screen shot, save it, then hold down on the image and copy it.
    Go to mail, create a new mail and paste it in.
    Save you mail as a draft.
    Go back to photos and select a different photo, copy it, and return to your draft, and paste it in. Repeat if you need to add more.
    Anything that you can take a screen shot or have an photo of can be pasted in one at a time into that draft email.
    If mail gets uncooperative, during this process, then double click on home button and quit multitasking mail, then open up mail again and send your draft. Uncooperative means gets frozen.

  • How to attach more than one picture on an email

    How to attach more than one picture on an email?

    Tap the square with arrow on top right and select pictures you want to send (max 5 pictures)
    http://i1224.photobucket.com/albums/ee374/Diavonex/f0bd7d73.jpg

  • How to attach a text in the center of the Ellipse using JXML ?

    How to attach a text in the center of the Ellipse using JXML ? Can we use labelFor="$topEllipse" ?
    <StackPane fx:controller="myfxml.ArchiveLogsController" id="Login" xmlns:fx="http://javafx.com/fxml">
    <children>
    <AnchorPane>
    <!-- Prevent AnchorPane so that it's max = pref. This causes it to center in StackPane -->
    <maxWidth><Double fx:value="-Infinity"/></maxWidth>
    <maxHeight><Double fx:value="-Infinity"/></maxHeight>
    <children>
    <Ellipse fx:id="topEllipse" centerX="100" centerY="100" radiusX="50" radiusY="10" strokeWidth="2" stroke="#FF0000" style="-fx-fill: linear-gradient(to right, white 0%, red 100%);"/>
    *<Label fx:id="ArchLogs_lb" text="My Ellipse Label" />*
    </children>
    <properties>
    <backgroundColor>
    <Color blue="1.0" green="1.0" red="1.0" />
    </backgroundColor>
    <elementLockSel>
    <Boolean fx:value="true" />
    </elementLockSel>
    </properties>
    </AnchorPane>
    </children>
    </StackPane>

    I'd suggest putting the Ellipse and the Label in a StackPane.
    I wonder why so many people call it JXML?
    It is so strange - I guess the JXML name just seems more natural to some people, though I don't know why.
    I think Greg is right and that labelFor is not what you want:
    http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/Label.html
    "Labels also are useful in that they can have mnemonics which, if used, will send focus to the Control listed as the target of the labelFor property . . . A Label can act as a label for a different Control or Node. This is used for Mnemonics and Accelerator parsing. This allows setting of the target Node."

  • How to insert a logo in sap script?

    How to insert a logo in sap script?

    Steps to insert a logo,
    I
    1. First save the file as BMP
    2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
    make it Zoom as 100% and save as *.TIFF
    3. Open SE38 and execute program RSTXLDMC
    4. Give your TIFF file path name
    5. Select Bcol (for Color)
    6. TEXT ID will be ZHEX-MACRO-*.
    7. Inplace of * write your own logo name (ZCOMPANYLOGO)
    8. Execute the program
    9. Now Goto SE71 create your ZFORM
    10. Create logo window
    11. Goto text element of logo window
    II
    1. Goto SE71 Change the mode to GRAPHICAL
    2. Choose the Graph Tabstrips
    3. Now type in some name for the LOGO WINDOW
    4. Press the IMPORT BUTTON and then IMPORT the BMP file from your DESKTOP
    5. The code will be written automatically. You just need to drag and drop wherever you want
    the graphics to be.
    III
    1 ) create a bmp file in local system
    2 )RSTXLDMC FM to upload image in tiff format.
    Also check these links...
    Logo in SAP SCRIPT
    Re: Uploading a (Image) Logo in your Sap Script
    Need Urgent Help for Logo Uploading the Sap Script
    sap script  logo
    http://www.sap-img.com/ts001.htm
    Regards,
    Sakthi Sri.

  • How can i print logo in all the page

    i've created a form(SAP script) which have  five page.pls can anybody tell me how can i print logo in all the five page?

    hi,
    u can try this in
          windows
    change window type as CONST or MAIN.
    cheers,
    sam

  • How can i transfer logo data to application server

    i am using sapscript in that i have logo i ma converting sapscript spool id to pdf and saving in application server.but logo is not transferres properly . when i remove logo its working properly. but when i add logo its not working.
    same thing working fine with logo if i transfer to PC file.
    i am using
    ERT         DV4K903440                                        1
            CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
              EXPORTING
                SRC_SPOOLID                    = P_SPOOLID
                NO_DIALOG                      = 'X'
               DST_DEVICE                     =
               PDF_DESTINATION                =
             IMPORTING
               PDF_BYTECOUNT                  = PDF_FSIZE
              PDF_SPOOLID                    =
              OTF_PAGECOUNT                  =
              BTC_JOBNAME                    =
              BTC_JOBCOUNT                   =
             TABLES
               PDF                            = it_pdf
             EXCEPTIONS
               ERR_NO_OTF_SPOOLJOB            = 1
               ERR_NO_SPOOLJOB                = 2
               ERR_NO_PERMISSION              = 3
               ERR_CONV_NOT_POSSIBLE          = 4
               ERR_BAD_DSTDEVICE              = 5
               USER_CANCELLED                 = 6
               ERR_SPOOLERROR                 = 7
               ERR_TEMSEERROR                 = 8
               ERR_BTCJOB_OPEN_FAILED         = 9
               ERR_BTCJOB_SUBMIT_FAILED       = 10
               ERR_BTCJOB_CLOSE_FAILED        = 11
               OTHERS                         = 12.
            IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
            ENDIF.
    *}   INSERT
    PERFORM WRITE_REPORT TABLES IT_PDF
                         USING P_FILENAME.
    FORM WRITE_REPORT TABLES PT_REPORT
                        USING  P_FILENAME LIKE RLGRAP-FILENAME.
      TRANSLATE P_FILENAME TO LOWER CASE.
    open output file
      OPEN DATASET P_FILENAME FOR OUTPUT IN BINARY MODE .
      IF SY-SUBRC NE 0.
        MESSAGE ID 'ZA' TYPE 'E' NUMBER 253.
      ENDIF.
      write each row out
      LOOP AT PT_REPORT.
        TRANSFER PT_REPORT TO P_FILENAME.
      ENDLOOP.
      close the output file
      CLOSE DATASET P_FILENAME.
    ENDFORM.                               " WRITE_REPORT

    You need to attach the Logo ( which is in the form of standard text ) to a transport request using the program RSTXTRAN.
    for that your Tr. request should be a correction.
    You need to goto SE10 and select the TR number and goto menu ->request/task->change type and change the type as correction.
    Then you execute the program RSTXTRAN and give the details of the standard text. Then only your standard text will get attached to the request.
    Then you need to transport this TR.
    regards,
    srinivas
    <b>*reward for useful answers*</b>

  • How to attach files in the new BT Yahoo system

    Can anyone tell me how to attach files to an email in the new system, please? I have a particular reason which is too complicated to go into here why occasionally I want to send files using web-mail rather than an email client (yes, I do know that's the best way). When I click the "attach" tab, I get an (apparently) helpful page which enables me to add several files at once. But there's no "continue" or "do it" button to get me back to the email I've started, and since ther's no tabs in the new system, I'm stumped.
    Solved!
    Go to Solution.

    Have you seen this thread? Not an elegant solution, but it appears to work for some bizarre reason.
    https://community.bt.com/t5/Email/Email-won-t-accept-attachments-error-18-temporary-It-isn-t/td-p/14...

Maybe you are looking for