How to attribute a colour code to a incoming message in Mail?

I'd like to attribute colour codes to Inbox messages.
In Outlook, you can select a message and give hem a colour refering to a group or a map (categorize).
I use already smart maps for ordening my messages, but I still miss a visual code in my Inbox.
I also use the rules to attribute colour to incomming messages, but I need to be able to add a colour to a message out of the rule.
Please help!

Here's another way:
1. Convert the picture to grayscale. As usual there are many ways to do this but here are two:
Enhance > Adjust Color > Remove Color
or
Enhance > Adjust Color > Hue/Saturation,
and move the Saturation slider all the way left.
2. Add a blank layer above the picture layer.
3. Set the Foreground color to your new color.
4. Alt-Backspace to fill the new layer with the Foreground color.
5. Change the layer's blending mode to Color.
6. Lower the layer's opacity to get result you want.
In this example I set the Foreground to blue and Opacity to 30%.
http://www.pixentral.com/show.php?picture=11k0iWXbZQtl3ycjGtFKYwBuFUwlp1
You might also experiment with other blend modes, such as Overlay, Soft Light, Hard Light, and others. Each will require a different Opacity to get your result.

Similar Messages

How do i set up an "out of office" message on Mail?

how do i set up an "out of office" message on Mail?

There is a ay to do it in Mail, using rules, but that's not a very good idea. Homemade rules can cause things like infinite mail loops (where two accounts auto-reply to each others until one or both mailboxes fill up and cannot receive any more messages). See what your mail server offers in this regard. Auto-replies on the server are typically far more reliable and less error-prone.

How can I get refund codes back after deleting the e-mail?

A mistake by iTunes had me purchase Taylor Swift's Red album for full price even though I had previously purchased a few singles. iTunes sent me an e-mail with some refund codes, but I can no longer locate the e-mail. I looked on my account under "Gifts" but they are not there. How can I retrieve these codes?
Thank you!!

You'll have to contact the iTunes Store again and ask if they can resend.
Regards.

How to save incoming messages in Mail?

Hate to sound as if the only mail programs I've ever used are Yahoo and Hotmail, but where is the "Saved Mail" folder, and why can't I create NEW folders to nest inside "Saved Mail"? I investigated "Smart" mailboxes, but that doesn't appear to be the same thing. Any help appreciated...

Rreubenhood
Welcome to Apple Discussions.
You can create nested folders under "ON MY MAC" into which you can move your messages from the Inbox. You can create folders within folders to further categorise messages received so that you end up with a structured storage method.
Chris

My ical wiped out a whole calendar category (i have four each with a different colour code) what happened? and how do i get my info back

My ical wiped out a whole calendar category (i have four each with a different colour code) what happened? and how do i get my info back

Read this:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
If you want your grandchild to play with the iPad use Guided Access:
iOS: About Guided Access - Apple Support

How to update OID oblogintrycout attribute through java code

Hi Team,
As per my requirement ,i need to update OID oblogintrycout attribute through java code. could you please help me on this.
where can i get the java code.
Regards,
Ravi.

As always, Google is your friend.
Follow the bouncing link.
http://www.google.com/search?hl=en&q=VisualSourceSafe+%2B+Java+API
PS.

How are attribute and text master data tables linked in SAP R/3?

Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
Thomas

Hi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max

How to write the dynamic code for RadioGroupByKey and Check Boxes?

Hi,
Experts,
I have created a WD ABAP application in that i have used RadioGroupByKey and CheckBox Ui elements but i want how to write the dynamic code to that i want to display male and female to RadioGroupByKey and 10 lables to check boxs.
Please pass me some idea on it and send any documents on it .
Thanks in advance ,
Shabeer ahmed.

Refer this for check box:
Do check :
bind_checked property is bind to a node with cardinality of 1:1
CHECK_BOX_NODE <---node name
-CHECK_BOX_VALUE <--attribute name of type wdy_boolean
put this code under your WDDOMODIFYVIEW:
DATA:
lr_container TYPE REF TO cl_wd_uielement_container,
lr_checkbox TYPE REF TO cl_wd_checkbox.
get a pointer to the RootUIElementContainer
lr_container ?= view->get_element( 'ROOTUIELEMENTCONTAINER' ).
lr_checkbox = cl_wd_checkbox=>new_checkbox(
text = 'WD_Processor'
bind_checked = 'CHECK_BOX_NODE.CHECK_BOX_VALUE'
view = view ).
cl_wd_matrix_data=>new_matrix_data( element = lr_checkbox ).
lr_container->add_child( lr_checkbox ).
Refer this for Radiobutton :
dynamic radio button in web dynpro abao
Edited by: Saurav Mago on Jul 17, 2009 10:43 PM

How to display the 'language code' for language dependent 'Short text' ?

Hi,
I am new to BW.
Can somebody help me with the following issue?
I have an attribute 'Material category description' and I chose short text exists and made it language dependent. I had loaded the master data successfully.
Now I want to know how to check the 'language code' for this material category description. When I display the data, will the language code display by defalult?
I had checked the text table using SE11
It displays the following fields over there.
/BIC/TS1_MCT_DS   [ /BIC/TS1(InfoObject name) ]
LANGU
TXTSH
I appreciate your help!
Thank you
Sekhar

Dinesh,
I went to RSD1 -> info-object -> Master Data/text tab. It shows my language selections there (Short text selected, language time dependent etc.) with everything grayed out.
In SE16, I could display the data in the following format.
/BIC/ST_PRID                TXTSH                 TXTMD
P01                                   umbrella                 rainyday
P02                                  tent                         waterproof
etc.
I want to see the 'language code' as one of the columns in this table.
Can you help me do that?
Thank you,
Sekhar

How do I get my code changes to show when published in Business Catalyst?

I have created my website using !Adobe Muse and have used the Ecwid ecomm widget to integrate a shop. As I wasn't happy with the font, colour, etc, I changed the code using the edit 'html' function, accessing the code information from a design browser mode and then further on in the process, I published it to Business Catalyst. However, now the changes don't show. How do I get my code changes to show when published in Business Catalyst? Do I need to go through the same process using Business Catalyst?

Hi,
Thank you for choosing Ecwid! To change the design of your storefront, you should go to Ecwid Control Panel > Settings > Design > CSS Themes. Find your current active theme and add all the necessary changes in a big input field that you’ll see there. To know more about how to improve your storefront design, please refer to this article http://help.ecwid.com/customer/portal/articles/1083332-how-to-change-ecwid-design
If you make changes to your CSS Theme but your storefront design remains the same, please refer to this article http://help.ecwid.com/customer/portal/articles/1149625-i-don-t-see-the-changes-i-made-to-m y-css-theme
Also, you can find a good range of articles and tips on how to improve your Ecwid store in our Help Center http://help.ecwid.com/ Feel free to use it!
If you get any other questions about CSS or Ecwid functionality, contact us on our forum http://www.ecwid.com/forums/ There we will be able to check your website and provide more specific solutions for you.

Colour code a column in an interactive report

Hi
Could anybody tell me how to colour code a column in an interactive report please.
I am using apex version 3.1.
Thanks in advance

When your IR is displayed, go to the Actions Menu, choose "Highlight" and enter the condition when which row or field should be highlighted.
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at

How do I activate colour management in Flash CS4?

I am struggling to find clear guidance on how to switch on colour management in Flash CS4. My attempts to search online have tended to give me far too many irrelevent results and it is not even mentioned in the index of my 700 page Flash CS4 textbook.
Some guidance would be appreciated.
David

I've found what appears to be an answer to my own question at the following link,
http://www.adobe.com/devnet/flash/quickstart/color_correction_as3/
The only problem is that it is an Actionscript 3.0 solution. Unfortunately, this is of limited use to me as most of my current Flash apps are image galleries purchased from activeden.net, all of which are written in AS2.
Am I right in thinking that there is no way of mixing AS2 and AS3 code in the same FLA?
David

What happens to ratings and colour codes when Aperture is reinstalled?

My iMac has developed all sorts of faults and I think it's time to clean up, wipe the hard drive and reinstall the operating system and apps. My Aperture library is quite large and the photos have all been painstakingly categorised using the colour codes within aperture. I copy the Aperture library to an external hard drive but will I lose all my colour codes, metadata and stuff? I'm sort-of hoping that the newly reinstalled Aperture will import all my photos with all the ratings, album structure and stuff.
Any ideas or advice?

Thatblokeoverthere wrote:
Thanks. This is a great start. So, if I move my entire Aperture library to an external drive and then move it back to the iMac hard drive, the new installation should set it all up exactly as before?
As long as the originals in the library are managed, that is located in the library, and not referenced then yes that is all you will need to do. When you have everything set to go the easiest way to have Aperture open this library is to double click on the library, this will cause Aperture to open it and make it the default library.
However as Léonie has alluded to this may not clear up the problems you are having. What is the model of the Mac you are using, how much memory is installed and how big is and how much free space is there on your system drive and what OS version are you running?
Perhaps there are less drastic measures you can take to clear up the problems.
regards

How to associate a T-CODE to an infoset or a quick view? sq01/sq02

How to associate a T-CODE to an infoset or a quick view? sq01/sq02

Hi , Try out these steps :
Pre requisites.
1. User group name where the Infoset is assigned to
2. Query name.
Steps.
1. Go to SE93
2. Put your transaction name.
3. Click on Create.
4. Input a short text.
5. Select "Transaction with Parameters" radio button.
6. Enter "START_REPORT" in transaction field under "Default values for" tab.
7. Check "Skip Initial Screen"
8. Check "Inherit GUI attributes".
9. Under Default Values "Name of Screen field"
a) D_SREPOVARI-REPORTTYPE Value: AQ
b) D_SREPOVARI-REPORT Value: (Usergroup Name)
c) D_SREPOVARI-EXTDREPORT Value: (Query Name)
10. Save.
Have a look at this thread - [Start Report and Tcode|http://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_forums_rm&query=start_report++%27aq%27&adv=false&sortby=cm_rnd_rankvalue]
Regards,
Lokesh

How can long lines of code be cut / separated into multiple short

In Java, How can long lines of code be cut / separated into multiple short lines?
Example
System.out.printf( "%d\t%d\t%s\t%s\t%s\t%s\t\t%s\n", arrayIndex , part[ arrayIndex ], name[arrayIndex], units[arrayIndex], price[arrayIndex], units[arrayIndex] * price[arrayIndex], total[ arrayIndex ] );Thanks

System.out.printf( "%d\t%d\t%s\t%s\t%s\t%s\t\t%s\n",
arrayIndex ,
part[ arrayIndex ],
name[arrayIndex],
units[arrayIndex],
price[arrayIndex],
units[arrayIndex] * price[arrayIndex],
total[ arrayIndex ] );P.S. It looks to me like you have an array for each attribute of something. This is not OO and you should consider creating a class holding the information about each 'Part' or whatever it is. You will then just need a collection of Parts.

How to attribute a colour code to a incoming message in Mail?

Similar Messages

Maybe you are looking for