How to: audit guest user traffic and keep it out of the tunnel

Hi all,
Project:
Install AP in county library for local client use to the cloud via cable/dsl (vlan3) and maintain usage counters.
Manage the AP thru the cloud, over the existing (3rd party) library network (vlan2), no client traffic.
Sounds just like an OEAP using the private ssid.  Just no accounting that way.
I read somewhere that ver 8.0 would let us flex internet traffic local and route everything else thru the tunnel,
but that probably would not provide a usage audit either.

Hi all,
Well the question had a bit of obfuscation built in.
I trunked my AP from the local switch...  native vlan 125.  Vlan 16 is the dsl pop.
AP links to the WLC via 125.  Flex ssid is linked to the local vl16.  The flex ssid is wpa2/psk and the WLC tracks all associations there-too with MAC/IP data, adequate to create user/count data.
Too simple.  I was thinking ACL's and all the rest.
Thank you

Similar Messages

  • How can I quit (close) Photoshop and keep all windows so that the next time I open Photoshop the fil

    How can I quit (close) Photoshop and keep all windows so that the next time I open Photoshop all the files that I had open are there already in the same position as when I closed Photoshop?
    I've been a Fireworks user for over 10 years and just switched to Photoshop. I cannot find a setting that will enable all my file windows to reopen when I quit Photoshop. This is really a problem since I often work on several files at the same time.
    Please let me know if the feature exists or point me to where I can post a message for a new feature to be implemented. The feature is a must for any designer working on large projects.
    Thanks!

    There is no such functionality. You could perhaps create a script that stores that info in a custom text file and arranges them accordingly in the workspace, but that's as good as it gets...
    Mylenium

  • How to retrieve guest user account backup

    I have an iMac and a time capsule.  A large number of pictures were loaded into I Photo in the guest account of my iMac.  I cannot now find these pictures as I understand that guest accounts are wiped clean each time the guest account is lodged out from.
    Given that we did not log out from the quest account for a couple of days, i am hopeful that the guest account was backed up by time capsule.  I cannot find the guest account on the backed up time capsule.  Does anyone have any suggestions whether TC backs up the guest account and if so, how can I locate it in TC.
    Thanks very much.  David

    Did you have the main account logged in as well as guest at the time? Do you have TM setup in the guest account?
    It is very unlikely TM backed it up. If it did simply mount the sparsebundle in finder and go through all the folders until you find the guest user account and check if there is anything there. If not sorry it was never backed up.
    The only solution I can see if to use a recovery software for the camera. Whatever source of the photos was.. stop using the memory card in that camera now.. use the recovery software as the files will be there until overwritten for the next lot of pictures.
    Pondini has all the info for recovery of files from TM.
    See Q15 here. http://pondini.org/TM/FAQ.html
    There is a section for iphoto.. but IMHO it won't be backed up.

  • How to delete Guest User Account

    I just got my Mac book Pro and I'm new to Mac. I created a Guest User Account and now I want to delete it. But the - (minus) option is grey out. How can I delete the Guest User Account? I have two accounts listed right now. The Admin and the Guest Account. Thanks for your help.
    p.s. I just found out I couldn't even open the folders under the Guest directory! How come? I am the Admin and should be able to do that. What did I do wrong? Help!!!

    I should also say that sometime in the future you might have a problem with something, and one of the first things you should test is, do you have the same problem in another account, so having a Guest Account is a good thing.
    You just log in as Guest and test to see if you have the same problem. So it might be a good idea to leave it active, for it takes up very little space. I always have more than one Account, and this new Guest Account sounds good to me, I like the idea that everything is deleted after log off.

  • How can I reset my main user from my guest user when I forgot my password for the main user? Please help me!!!

    Ok. I know I'm really stupid!
    I forgot my main user password and so then allowed someone on my laptop who accidently changed over into the guest user! Now I can't get back into my main user and I was wondering if anybody could either help me reset the password from the guest user or even reboot my laptop so the memory is wiped and I can set up my main user again. Please help me!!!

    Forgot Your Account Password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password, OS X Mountain Lion- Reset a login password, and
         OS X Lion- Apple ID can be used to reset your user account password.
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself

  • I have just bought a new iphone 4 as an upgrade to my iphone 3GS.  How can I transfer all my apps and data to the new iphone 4 and keep facetime etc on the new iphone 4.  If I do a restore of the iphone 3GS I only get the 3GS apps (i.e. no facetime)

    I have just bought a new iphone 4 as an upgrade to my iphone 3GS.  How can I transfer all my apps including saved levels in games etc. and data and folders to the new iphone 4 and keep facetime etc on the new iphone 4. When I have done this for someone else they got all their data etc but lost the Face Time App and teh iphone 4 looked like the iphone 3 screen.

    There is no FaceTime app for the iphone, FaceTime is built into the iOS. Follow the directions here:
    http://support.apple.com/kb/HT2109

  • New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

    New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

    The built-in guest user account will not do this. Simply create a new standard account and call it "Guest" or "Guest Users" or whatever you like.
    Go to System Preferences > Users& Groups, click "+" to make a new account.

  • How to dump guest user database from 4402 to 5508

    Hi Everyone,
    Currently all our guest user accounts are created on a 4402WLC that is running on code 4.2.61.0. This WLC will be replaced by a 5508WLC that is running on 7.0.116.0. Is there a way to export all the guest user accounts and password from 4402 and import them to 5508? I can only get account name from "show running-config" and password is not showing there.
    Thank you.
    Robert

    Hi Patrick,
    I'm pretty sure I can only see "netuser lifetime xx" and "netuser wlan-id xx". I can't see "netuser add xx".  I've checked both lab WLC4402 and production WLC4402. They give me the same results. The following is my WLC's info.
    (Cisco Controller) >show sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 4.2.61.0
    RTOS Version..................................... 4.2.61.0
    Bootloader Version............................... 4.1.171.0
    Build Type....................................... DATA + WPS
    System Name...................................... c1lab-wlc4402-1
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.3
    IP Address....................................... 42.116.24.172
    System Up Time................................... 270 days 23 hrs 49 mins 51 secs
    Configured Country............................... US  - United States
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +45 C
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    --More-- or (q)uit
    Number of WLANs.................................. 10
    3rd Party Access Point Support................... Disabled
    Number of Active Clients......................... 13
    Burned-in MAC Address............................ 00:19:AA:72:3C:A0
    Crypto Accelerator 1............................. Absent
    Crypto Accelerator 2............................. Absent
    Power Supply 1................................... Absent
    Power Supply 2................................... Present, OK
    (Cisco Controller) >

  • How to restore my icloud backup and where can I find the setup assisant in my new ipad

    Dear Sir
    Can you help my on how to restore my icloud backup and where can I find the setup assisant in my new ipad?
    Thanks and Regards,
    Clare

    iPhone User Guide (For iOS 6.1 Software)

  • How do I remove server os and install normal os?  The computer has never been used as a server.  I only purchased the server version because of two internal hard drives.

    How do I remove server os and install normal os?  The computer has never been used as a server.  I only purchased the server version because of two internal hard drives.

    If you want to just disable the Server aspect, this should work for both Lion and Mountain Lion...
    http://support.apple.com/kb/HT4827
    If you want to completely start over, backup your /Users and /Applications directories and re-install the client OS.

  • I have a new computer.  How do I get my books and apps to show in the library on my itunes?

    I have a new computer.  How do I get my books and apps to show in the library on my itunes?

    Copy the ENTIRE iTunes folder from the old computer to the new computer.

  • I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how.  I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click.  Help?!!

    I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how.  I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click.  Help?!!

    If you have iTunes 11 on your Mac then you can enable the left-hand sidebar via option-command-S, that might make it easier to navigate.
    Connect the phone to your Mac and select it on that left-hand sidebar, and on the right-hand side of the screen there should be a series of tabs which you can use to select what to sync to the phone. If it's an audiobook then it should appear on the Books tab for selecting/syncing, and films will be on the Movies tab. When you've got the audiobook on your phone you should get an Audiobooks option in the Music app (you might need to tap the '...' tab at the bottom of the Music app to see it).

  • How can I listen to itunes and play a game at the same time on my ipad 4?

    How can I listen to itunes and play a game at the same time on my ipad 4? This means I need to run 2 apps at the same time itunes and my game.  The game has its own sound control so I can turn off its sound while i listen to itunes tracks.  But I don't know how to set it up so the ipad does both.

    Anytime you open an app that has a persistant sound stream - a movie, a podcast, some games - it will overide the music app's stream. nothiong you can do to change it.

  • How can you listen to music and play a game at the same time?

    How can you listen to music and play a game at the same time?
    I am playing music, by starting the Crash Baandicoot Nitro Kart 3D game it shuts off the music playing. Is there a way around this?
    It seems like this should be possible.
    Message was edited by: RuthlessVengeance
    Message was edited by: RuthlessVengeance

    Select the music play list you want to listen to and start it playing. Go back to the home screen and start the app you want to use, music will stop. Press the home button two time quickly and it will bring up a simple control for controling the music. This works for me with all of the apps I have purchased including games. Just a note you can pull up the same music control if the iPod is a sleep and locked by pressing the button three times quickly.
    Mike

  • I forgot my ipod password and when I try to restore and update thru itunes, it keeps timing out when the download is done

    I forgot the password to my ipod touch, when I try t restore and update thru itunes it keeps timing out at the end of the download?

    Try disabling your computer's security software.

Maybe you are looking for

  • How can I view all photos from a specific year?

    How can I view all photos taken in one calendar year like 2010? Is there a way to filter this way?

  • Defining fillable form fields in IDCS4

    2 questions: Is it possible to define fillable form fields in ID that will export to PDF?I create a lot of custom proposals and would like to avoid having to define the fields over and over again in Acrobat. Also, some clients tell me that they can't

  • Connecting home theater projector and monitor in kitchen

    I just ordered a refurbished 2.0Ghz mac mini so I can use it as my home theater computer. I would like to connect it to my receiver's HDMI input so I can display the video on my projector. I also want to connect it to a monitor in my kitchen so I can

  • Comparing results from a method using jsp

    I want to check if my password check returns a row number of 1. but I keep recieving this error in my jsp calling page. org.apache.jasper.JasperException: Unable to compile class for JSPC:\tomcat\jakarta-tomcat\work\localhost_8080_0002ftest_0002fadet

  • Need some info about newest version of Illustrator

    I'm currently using my CS3 version of Illustrator, but wondering if Illustrator has grown to take in more of the great features that we used to have in Freehand. Here are the features I miss most from Freehand: 1.) Able to name artwork and modify glo