How to audit my newly created Roles (FINANCE MODULE)

Hi,
My client send me an e-mail and asked the following:
Can you assign a user the following roles that are standard in SAP - SAP_AUDITOR_SA & SAP_AUDITOR_SA_BC (I think from memory)?
Change them to ZSAP_AUDITOR_SA & ZSAP_AUDITOR_SA_BC.
Can you test our finance roles with the audit user ID? Documenting the conflicts/SOD in our roles u2013 I would suggest documents it onto a spreadsheet like the unit testing one.*
How will i test the roles that i created with the auditor user ?
Any ideas
Regards,
HIral

Just to add few points: Also try with Transaction SU98 to check the SAP Proposed Critical combination of FI Transactions. This can be checked in the table SUKRI also.
FYI: To run a SOD analysis for a specific combination of Authorizations, you can try with SU97. The authorization IDs you see their can be created as per your (customers choice) by report RSUSR008_009_NEW.
Regards,
Dipanjan

Similar Messages

How to Apply a Newly Created Access Policy on Existing Users in OIM????????

How to Apply a Newly Created Access Policy on Existing Users in OIM?
When the rule is getting failed the user is getting removed from the group but resource is not getting revoked. This is happening only for the old uses..for the users which i created now it working fine..i mean its resource is getting revoked.
(Retrofit access policy" is checked on the Access Policyand Revoke if not longer applied is checked.)
For the old users i see the POl_Key is null, for new users i see a value '10'. So i updated the pol_key for old users same as it got generated for new users '10'.
i even updated the form version too but still revoke doesn't work.
I cant go for the below approach..
In order to apply a newly created Access Policy on existing users, one has to make sure that:
1) "Retrofit access policy" is checked on the Access Policy.
2) Then run the "Set User Provisioned Date" Schedule task to apply the Access Policy on the existing users in OIM.
Note: After 9.1.0.1 BP03 the access policy execution has been moved to a new scheduled task "Evaluate User Policies" as mentioned inDocument 839368.1 :How to Use Access Policies to Provision with Groups.
Is there any other approach i can try.. if you have any idea please reply me asap
Thanks..

Thanks for the reply kevin..
We decided to try the Schedule task (Set User Provisioned Date).
But i see one problem here after seeing this post in metalik --> Can Access Policies Manage The Life-cycle Of Users Created via Reconciliation? [ID 1136540.1]
According to this post Access Policies framework does not manage users who are obtained either through trusted reconciliation or target reconciliation.
Is there any custom way to achieve this??
How does the access policy framework revoke resource work? (revoke if no longer applies)??
Edited by: IDMuser19 on Jun 21, 2011 11:43 PM

How can i add newly create infotype in t.code po13

Can any one pl tel me how can i view newly created infotype in t.code PO13
Edited by: Utkarsh M parikh on Mar 10, 2010 5:29 PM

See:
Mac OS X Automation,
Automated Workflow Tips,
Introduction to Automator tutorial, and
a four-parter on Automation in Snow Leopard by Sal Saghoian:
Snow Leopard Services,
Services for iPhoto,
Safari and WebKit integration, and
Installing and using services.
Finally,
Developing AppleScript Applications and
Apple's Automator Developer Documentation

How to get the Newly Created Material

Hi all,
Iam creating Materials using BDC sessions method,My Problem is to update the Newly Created Material in a Ztable.
so iam getting the Newly created Matnr by the following peice of code
    SELECT matnr FROM mara INTO TABLE v_matnr
                           WHERE ersda = sy-datum
                           ORDER BY matnr DESCENDING.
But the thing is,we are getting Previously created material.i.e the new material will be created only after the sessions are processed,but when i write the above code in the program we are getting previous material.
so how to update the newly created material.
I think we can't do that through program because we can get new material only after processing the session..so what is the solution for this.should we use userexits for getting the newly created material.
thanks in advance
balaji

Hello,
Use the <b>BAPI_MATERIAL_SAVEDATA</b> to create the materials.
The BAPI will return the Material number which is created at that instance by which u can update the ZTABLE.
Vasanth

Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)? Thank you!

Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)? Thank you!

>> then I get a completely blue screen.
That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
And sure enough, your video card driver is almost 2 years out of date.
Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over).

How to view your newly created webservice in dynamo administrator??

hi everyone,
i newly created a webservice for getGiftlistId and i can successfully see that in my dynadmin webservice Registry . but when it comes to accessing that getGiftlistId.wsdl i could not able to find the URL fo the same. For example we have a webservice for getInventory , we can access the wsdl with a URL http://hostname:port/commerce/inventory/getInventory?WSDL.
getInventory is a pre-built ATG webservice. so we can access directly with the above given URL. how can i access my getGiftlistId ??
can anyone tell me the how that url's will be constructed???
Thanks&Regard,
Ravi.

I don't know much about webservice.
But when I generate server side code(for testing purpose) from wsdl using generate java bean skeleton option, It generates InvokeMY_SERVICE_SEIPort.wsdl.
So to access the webservice I used following url:
http://domainname:port/Webservice_context_root/../InvokeMY_SERVICE_SEIPort - this is the wsdl file path.
In order to view the wsdl I used following url:
http://domainname:port/Webservice_context_root/../InvokeMY_SERVICE_SEIPort?wsdl
Thanks,
Nitin.

How to add a newly created search group into portal's search functionality

Is there a way to configure search in the portal to include a newly created search group?

Could you please elaborate on what you are trying to do.
What version of Portal are you using?
What do you mean by a 'Search Group'?

How to use my newly created fonts?

I have created a new set of fonts. saved them per letter as .eps but cannot seem to import them. The excisting libraries are .ttf ?!
Anyone know how to get this functioning?

Hi Jerry,
Please refer to the following blog and check whether you followed all the steps:
/people/harikrishna.sunku/blog/2008/12/18/work-center-and-navigation-link-creation-in-crm-2007
You basically need to ensure that your custom work center is assigned to a navigation bar profile; and this navigation bar profile is assigned to your business role.
Regards,
Shiromani

How to make sure newly created row is editable by default programatically

Hi All,
I got a problem with creating new row in single row selection table with on click property enabled for editing mode.
Function requirement is like: I have Mater-Detail. While creating detail lines, line has to be created with default line number. Eg: Master1 can have line numbers 1,2,3..etc, Master2 can have 1,2,3.. etc.
In applicationTable for Pattern Create
Action Listener=”#{CreateAndEditFiscalDocumentBean.createChargeLine}”
In Table rowSelection="single" and editingMode="clickToEdit"
Here the problem is:
When I first come to the page,the first row in the detail table is editable and could able to edit any other row on click . But When I create a new row , I got a new row with line number but it is not editable.
I want it to be editable on create and previously selected row should be read only. I have tried several ways but nothing is working.
My observation is, when I call the bean method in Action Listener of application Table in create patteren, I am facing this problem. If I do not call this method, it is working as expected. But I need to call this method because it has to create row with line number.
I am putting below two scenarios which I have tried. I am not successful in the both the scenarios.
Could you please help me in achieving expected functionality.
Many thanks in advance for your time and help.
Scenario 1:
Jsff:
ApplicationTable: createActionListener="#{CreateAndEditFiscalDocumentBean.createChargeLine}"
Table: rowSelection="single", editingMode="clickToEdit"
Bean Code:
public void createChargeLine(ActionEvent actionEvent) {
FacesContext fc = FacesContext.getCurrentInstance();
ExpressionFactory factory = fc.getApplication().getExpressionFactory();
MethodExpression method=factory.createMethodExpression(fc.getELContext(),"#{bindings.createChargeLine1.execute}",String.class,new Class[]{});
method.invoke(fc.getELContext(),null);
AMImpl Code:
public void createChargeLine() {
ViewObject itemChargeVO = this.getFiscalDocumentCharges();
ViewObject fiscalDocumentHeaderVO = this.getFiscalDocumentHeader();
Row toRow = fiscalDocumentHeaderVO.getCurrentRow();
Row newRow = null;
Row latestRow = itemChargeVO.first();
Integer line_number = new Integer(0);
int numberOfItemLines = 0;
if (latestRow != null) {
RowSet rs = itemChargeVO.getRowSet();
numberOfItemLines = numberOfItemLines + 1;
if (rs != null) {
line_number =
(Integer)rs.first().getAttribute("LineNumber");
while (rs.hasNext()) {
numberOfItemLines = numberOfItemLines + 1;
Row row = rs.next();
if (line_number.compareTo((Integer)row.getAttribute("LineNumber")) <
0)
line_number =
(Integer)row.getAttribute("LineNumber");
line_number = line_number + 1;
newRow = itemChargeVO.createRow();
newRow.setAttribute("LineNumber", line_number);
itemChargeVO.insertRowAtRangeIndex(numberOfItemLines + 1, newRow);
itemChargeVO.setCurrentRow(newRow);
} else {
newRow = itemChargeVO.createRow();
newRow.setAttribute("LineNumber", new Integer(1));
itemChargeVO.insertRowAtRangeIndex(0, newRow);
itemChargeVO.setCurrentRow(newRow);
Scenario 2:
Bean method changes:
public void createChargeLine1(ActionEvent actionEvent) {
Row newLine = ApplicationsTableEventHandler.getInstance().processCreate(getChargeTable());
newLine.setAttribute("LineNumber", new Integer(1));
}

Hi Jerry,
Please refer to the following blog and check whether you followed all the steps:
/people/harikrishna.sunku/blog/2008/12/18/work-center-and-navigation-link-creation-in-crm-2007
You basically need to ensure that your custom work center is assigned to a navigation bar profile; and this navigation bar profile is assigned to your business role.
Regards,
Shiromani

How to cancel the newly created record

Hi,
I have created a record in a table, but i want to cancel that record before pressing the apply button.
How to do this like "Clear Record' in oracle forms?
Thanks in advance,
SAN

Hi,
Use below code to delete a record in Advance table...
AM:
public void Delete(String dseqnum)
Number dsequm;
int fetchedrowcount;
int dseqnumtodelete;
RowSetIterator deleteIter;
OADBTransaction tr = getOADBTransaction();
DisconutVOImpl dvo = getDisconutVO1();
DisconutVORowImpl row=null;
dseqnumtodelete=Integer.parseInt(dseqnum);
fetchedrowcount=dvo .getRowCount();
deleteIter = dvo .createRowSetIterator("deleteIter");
deleteIter.setRangeStart(0);
deleteIter.setRangeSize(fetchedrowcount);
for(int i=0;i<fetchedrowcount;i++)
row= (DisconutVORowImpl)deleteIter.getRowAtRangeIndex(i);
dsequm=(Number)row.getAttribute("SequenceNumber");
if(dsequm.compareTo(dseqnumtodelete)==0)
row.remove();
break;
deleteIter.closeRowSetIterator();
Call above method in co on delete action:
CO:
if("Delete".equals(pageContext.getParameter(EVENT_PARAM)))
String delete_mpid=pageContext.getParameter("MPeriodid");
AM.Delete(pageContext, webBean,delete_mpid);
Note:Set below properties for Delete button..
Disable Server validation:*TRUE*
Disable Client validation:*TRUE*
Regards
Meher Irk

Urg: How to have a newly created BMM layer column to hold 3 differt values.

HI Team
I have 3 different columns i.e 7 days ago , last month , last 2 month. I have a requirement of creating a single column to hold this three different values.How do i achieve this.
Regards

Hi,
Thanks for awarding.
This can be achieved by building a intermediate report.
First, you need to create a intermediate report with the original Time column and one more same time column but with calculations for the past 7 days.
Secondly, you need to create a prompt for the Time and make a presentation variable and refer it in the intermediate report. And make the original Time column equal to the presentation variable.
Thirdly, you need to create the main report with the Time column and fact measure column. Time Column should refer to the intermediate column value (ie ' is based on results of another analysis').
Place the prompt, intermediate report and main report and check this will work for sure.
Similarily, create intermediate reports for other calculations and refer them in the main report.
Hope this surely helps.
Regards
MuRam
Edited by: MuRam on Dec 21, 2011 9:26 AM

How to edit a newly created assignment block?

I created a new AB and it shows up and saves values input too. However, when I open it up for editing, unlike other ABs, it does not show any buttons for editing. So I can not edit already input values. Any ideas what I am missing here? I created the view as a form type with std buttons. It is in configurable mode too.
Regards,
Amar.

Hi Amar,
yes, you need to code for the edit button. Have a look at the last lines of methode DO_PREPARE_OUTPUT() of class CL_BP_DATA_MARKETINGATTR4_IMPL.
Also check the usage of the VIEW_GROUP_CONTEXT in method EH_ONTOEDIT().
cheers Carsten

How to read status of a newly created notification

Hello All,
I have implemented a BTE for the event PM000010 - Update Notification.
Now my problem is that I wish to read the existing statuses on the notification.
This works fine if the notification already existed before.
However, if the notification is newly created, then Function Modules STATUS_CHECK and STATUS_READ do not work.
This is only if the notification is newly created.
I am particularly interested to know if the status Notification In Process and Notification Completed are present on the order.
How do I achieve this since STATUS_CHECK and STATUS_READ are not able to fetch the statuses when the notification is newly created?
Thanks,
Mithun

hi
check out the below details
Where to get the table which is having user status with Notiifcation number. (not the system status).
By : Selva
1. From table QMEL get OBJNR(object number) using the QMNUM( notification number).
2. Using this OBJNR get STSMA( Status Profile) from table JSTO.
3. Using the OBJNR get STAT(object status) from table JEST.
You may/ may not get multiple object status for an Object number.
System status number will start from E.
User status number will start from I.
4. To get the text of the status, use the status number (STAT) and STSMA to get the status text from table TJ30T.
We have done this and working fine.

How to assign project specific task with the newly created projects ?

Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?

Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option

How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?

Hello,
How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?
I have tried several tutorials but these either:
- show correction in premiere sequence (which is not practical; given the huge number of files we have)
- or show the editing in audition of a sequence, not the clip.
We have started merging audio and video (removing the original audio during merge) but some of the merged clips are out of sync, so we need to correct manually, BUT we want to correct the merged clip, which may or may not end up being used, so we do not want to take it to the sequence as all we are doing is prepare the synced files for editing.
Any idea how I can correct the synchronisation in Audition?, when I right click on clip and select "Edit in Adobe Audition" I get a list of files but not a multitrack session where I can see my video and audio tracks.

if premiere pro doesn't sync your footage properly, and you have a huge number of files, you may want to look at pluraleyes. there is a demo, and if it works properly, it would save you time to have it done right the first time, instead of tracking down random merged clips with bad sync.
premiere will either export a complete sequence or "edit clip in audition". the edit clip will create a copy of the original audio and open that in audition. there is no dynamic link, its just an audio file open in two programs at the same time. since there is no dynamic link, its not possible to bring merged clips into audition.
Adobe Premiere Pro Help | Synchronizing audio and video with Merge Clips
Once created, the merged clip cannot be re-synchronized, or adjusted. You must make a new merged clip.
Merged clip audio results in mono track audio only.Final Cut Pro XML and AAF interchange formats are not supported.
this doesn't give me much hope that audition or any other adobe program outside of premiere will help you fix the problem merged clips.

How to audit my newly created Roles (FINANCE MODULE)

Similar Messages

Maybe you are looking for