How to authenticate using PEAPv1 (EAP-GTC) to connect to a wifi network in iPad 3?

The iPad in Business deployment senario guide says that we can connect to a wifi network using the PEAPv1 (EAP-GTC).
But when we try to connect it, there is no option to choose that authenticaion method.
Also, when we try to create a profile using iPone Configuration Utility, there is just PEAP available (by default PEAPv0 (EAP-MS-CHAP v2)).
It is very important for me as my organisation allows only PEAPv1 authentication and I'm not able to connect to its wifi network.
Thanking all of in anticipation.

Link for iPad in Business -
http://images.apple.com/ipad/business/pdf/iPad_Deployment_Scenarios.pdf
Link for iPhone Configuration Utility -
http://support.apple.com/kb/DL1466

Similar Messages

How does one use airport express to extend a non-Apple wifi network?

Hello. The wifi signal reaching my room shows good on my macbook but weak on my ipod touch. Therefore I want to pick it up on my airport express and extend/boost it.
I have tried everything in the auto and manual methods of setup to do this, but the only thing I can manage to do is to join a wireless network wirelessly and then then connect to it through a ethernet cable from my airport express. I want to pick it up wirelessly and extend it wirelessly - is this possible? This is the reason why I bought it!
thanks a lot, JJ

Thanks for that info. So, I have been trying to use my airport express n to extend an airport n network (for greater distance of coverage) and cannot get this to work either. I can join the other apple airport's network and then connect to the airport express by cable. I have tried all the help available here but that seems to be the only way to extend a network. But I cannot see any point in that! JJ

802.1x PEAPV1 (EAP-GTC) not working on Ipad/Iphone

I am currently working on deploying 802.1x at a remote location for a University. We use Cisco WCS to query a LDAP server. Apparently the Iphones and Ipads are unable to connect using 802.1x PEAP. We have both PEAPv0(EAP-MSCHAPv2) and PEAPv1(EAP-GTC) turned on but our LDAP server only supports EAP-GTC. Does anyone know which PEAP version the Ipad/Iphone supports?? I have included output from the Iphone Configuration Utility while I tried to connect.
Fri Sep 2 10:54:50 ********** eapolclient[150] <Notice>: peap_verify_server: server certificate not trusted, status 3 0
Fri Sep 2 10:54:50 ********** Preferences[141] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:] event: 3
Fri Sep 2 10:54:50 ********** Preferences[141] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:]: User Information required
Fri Sep 2 10:54:55 ********** Preferences[141] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:] event: 1
Fri Sep 2 10:54:55 ********** Preferences[141] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:]: EAPOL failure
THANK YOU!!!

I am having the same issue..
Whenever i am trying to connect my iphone to a WPA2-Enterprise network, it by defaults connects through the MSCHAPv2 Auth protocol, whereas my LDAP supports only GTC auth protocol.
But there is no option to change the encryption type when configuring a WiFi.
Requesting to please update as to how connect to the WiFi.
Thanks in Advance.

How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

When i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

you may be connected to the wireless network but the question is the internet working properly on the wireless network...
what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues.

How can i use 2 different apple ids for imessage and facetime on 1 ipad?

How can i use 2 different apple ids for imessage and facetime on 1 ipad?

Do you mean can you use one Apple ID for FaceTime and one for iMessage? You should be able to. Or, do you mean, can you log into iMessage (or FaceTime) with two Apple IDs at once? No.

How can i use my iPhone 4 and connect via bluetooth with my macpro

how can i use my iPhone 4 and connect via bluetooth with my macpro

The only way that you can connect your iPhone to the mac is to use it for a "Wi-fi hotspot" meaning that you can use the celluar connectivity of your phone to connect your computer to the interent.
Do you mean a MacBook Pro of the desktop MacPro?

I just bought a used i book g3 it will not connect to my wifi network, I bought two of them actually one is a g4 other g3, the g4 connects fine, but the g3 not so much. If anyone would have the answer on how to fix it or run a test on it.

I just bought a used i book g3 it will not connect to my wifi network, I bought two of them actually one is a g4 other g3, the g4 connects fine, but the g3 not so much. If anyone would have the answer on how to fix it or run a test on it.

Make sure your network has 802.11b activated. The G3 only supports the "B" wireless networking protocol. Modern networking is "G".

How many PCI-FBUS/2 cards can be used in a PC to connect to various Fielbus networks?

How many PCI-FBUS/2 cards can be used in a PC to connect to various Fielbus networks? Are there limitations with the Communications Manager and Configurator?
I currently have 1 PC with a PCI-FBUS/2 card interfaced to 2 Fieldbusses. Can I place any PCI-FBUS/2 card into the PC and run 2 additional Fieldbusses?

Hi hhsatBeck,
The limitations of CM and Configurator is,
Configurator supports maximum 4 FF online segments, including H1 and HSE. For more than 4 segments, extra upgrade package should be purchased.
CM supports maximum 16 FF segments, including both online and offline.
So, you can use at most two PCI-FBUS/2 card (4 segments) on one PC.
Feilian (Vince) Shen

My ipod 5 was stolen but I have find my ipod installed on it but my ipod isn't/never was connected to a wifi network when it was stolen so how will my ipod play sound or go on lost mode and if there's no wifi connected to it?

my ipod 5 was just recently stolen in a waterpark (same with my best friend) and when i went on to find my ipod I pressed play sound and lost mode but it never successfully did all those things because my ipod wasn't or isn't connected to a wifi network as it says in the app. so how will I ever find my ipod if it never is going to connect to a wifi network without the thief accessing my ipod (I have a passcode). and also when I check the app once in a while it says ipod is online but cannot find location, so does that mean the thief is using my ipod or is trying to get in?

Yo are correct. It has to connect to internet for the FindMyiPhne features to be transmitted to the iPod
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Tried to use my two airport express to extend my wifi network on a windows pc but no success

Tried to use my two airport express to extend my wifi network on a windows pc but no success

My two airport express base stations are 802.11n and i am triying to use them extend my wireless network which is using a D link wirless router as supplied my my ISP connected to TalkTalk network.
Unless the D-Link wireless router has Ethernet ports for each of the 802.11n AirPort Express Base Stations (AXn) to connect to, they will NOT be able to extend the wireless range of the D-Link.
Instead, when directly connected and reconfigured for a roaming network, these base stations CAN extend the range.
Please check out this Apple Support article on how to use AirPorts to extend a wireless network.
The key is to have both AXns configured as follows:
As a bridge.
Each having a unique Base Station Name.
Both using the same Network Name (or SSID), wireless security type and password as the D-Link.
Each AXn to use a channel at least 3-5 channels apart both from each other and that of the D-Link.

How come my macbook Pro doesn't automatically connect to my wifi when it is saved under known networks?

How come my macbook Pro doesn't automatically connect to my wifi when it is saved under known networks and i have the box checked under network settings?

Random35,
does your wi-fi router filter access by MAC address? If it does, then have you added your MacBook Pro’s MAC address to your router’s whitelist of acceptable MAC addresses?

To use a router to set up a local wifi network. Would this system be suitable to use with an Apple TV or is internet access require

I'm considering using Apple TV to connect to a projector in a church hall which does not have any internet access. I intend to use a router to set up a local wifi network. Would this system be suitable to use with an Apple TV or is internet access require

Welcome to the Apple Community.
Yes, that will be fine providing you don't want to play any protected content.

How do i get my macbook to stay connected to my wireless network . i have to constantly rejoin it when i go online.

How do i get my macbook to stay connected to my wireless network . i have to constantly rejoin it when i go online.
Wayne

Open System Preferences > Network > Advanced, and see if your network appears in Preferred Networks. If not, do it

HT4262 I have two networks one each in two cities. Both are named the same but require different passwords. I am at my second location but cannot connect to his wifi network. How do I delet one network so I can connect to my second network?

I have two networks one each in two cities. Both are named the same but require different passwords. I am at my second location and cannot connect to this wifi network. How do I delet one network so I can connect to my second network?

Just go to the wireless network preferences and empty out all the stored wireless networks.. then scan and connect to the local wireless.
Select them and tap the - button below it.
Once they are emptied out.. it might be good to reboot the computer with the remember networks unchecked.
Start with a clean slate.

How to authenticate using PEAPv1 (EAP-GTC) to connect to a wifi network in iPad 3?

Similar Messages

Maybe you are looking for