How to auto collect form responses and get an email notification?

Is there a way to auto collect form responses AND get an email notification? Currently I have my form set up to auto save and collect the responses and its working well but I cannot figure out how to add an email notification as well so we know when to check for new submissions.

[discussion moved to FormsCentral forum]

Similar Messages

  • How to monitor OSD TS failure and get alert or report?

    How to monitor OSD TS failure and get some alert or generate an report?
    We have SCCM 2012 R2 CU1 with MDT 2013.
    I have checked the OSD reports in SCCM and everyone is emty, where do SCCM get data to the what to activate?
    (I thinking of "Task Sequence - Deployment Status" reports)
    I am not sure people read report manually or lock at the MDT monitor view. So best I think that generate an email or incident in Service Manager when an TS fails.
    We do have SCOM, SCSM, SCO.
    Is there anyone that can point what way or what option I have?
    /SaiTech

    Specifically you could use this Status Message Query syntax to monitor your Task Sequences for errors:
    select stat.*, ins.*, att1.*, att1.AttributeTime from SMS_StatusMessage as stat left join SMS_StatMsgInsStrings as ins on stat.RecordID = ins.RecordID left join SMS_StatMsgAttributes as att1 on stat.RecordID = att1.RecordID inner join SMS_StatMsgAttributes
    as att2 on stat.RecordID = att2.RecordID where att2.AttributeID = 401 and att2.AttributeValue = "DOJ200A1" and stat.SiteCode = "DOJ" and att2.AttributeTime >= ##PRM:SMS_StatMsgAttributes.AttributeTime## order by att1.AttributeTime desc
    Just replace DOJ200A1 with the Deployment ID of your Task Sequence and DOJ with your SiteCode.
    If you want to generate an alert if the TS fails then you could run a script that calls a utility (or similar) which sends a pre-configured email to a specified address (as an alternative to Torten's response). This could be placed in the built in error
    logging section of the SCCM integrated MDT Task Sequence when it fails which I assume you are using (right at the bottom, called Gather Logs and StateStore on failure).
    There are heaps of ways of generating an email from a TS and controlling error logging just do a search - as you have Service Manager you could even use your instance of Orchestrator and call a run book in your TS which does the email?
    Cheers
    Damon

  • How do I cancel my subscription and get a credit?

    How do I cancel my subscription and get a credit?  My renewal for ExportPDF was 9/20/14 and I no longer use the product.  I went to my profile and turned off the auto renewal feature.

    Cancel your membership or subscription | Creative Cloud
    https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  • Firefox 5 has lost all my chrome tab's and capabilities which came with 4? how do I un install 5 and get back to my version 4?

    firefox 5 has lost all my chrome tab's and capabilities which came with FF4? how do I un install 5 and get back to my version 4 & retain all my bookmarks at least I's also like to retrieve my Chrome capabilities as well?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • What is the best way to enlarge a part of a photo in lightroom?  How much cn you enlarge it and get

    what is the best way to enlarge a part of a photo in lightroom?  How much cn you enlarge it and get an acceptable result?

    The way I would do it would be to crop the image so that it only displays what you want, then export that image and specify the dimensions. You will have to experiment with different export sizes to determine what would be acceptable for your situation. You might be more forgiving or more demanding than anyone who would venture to answer that question. That's the nice part about digital photography; you can experiment to your heart's content until you get the result you are looking for.

  • How do I insert new record and get results on a landing page

    how do I insert new record and get results on a landing page

    It's not clear from your post what you are asking. In a SQL database, you use the INSERT statement to insert a row into a table. You use the SELECT statement to retrieve rows. Here's some basic info on how to do that within PHP
    PHP MySQL Insert Into
    PHP MySQL Select

  • When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop and get back to normal?

    When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop and get back to normal?

    Hi
    chorleyman wrote:
    you do have to actually define the area to be bounced in the dialogue window that comes up - there are some discrepencies in the way that the program behaves like that,
    Apart from the "Include Audio Tail" function, which can leave Logic bouncing for a very, very long time, there are generally, no discrepancies regarding the Bounce Locators:
    If Cycle is enabled, the bounce locators will be set to the cycle locators.
    If Cycle is off, and regions are selected, the bounce locators will be set to the selection.
    If cycle is off, and no regions are selected, the bounce locators will be set from the Project Start to the project end.
    It is smart to actually check that the bounce locators are set where you would like them to be.
    wildfire31 wrote:
    When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop
    If you get caught with a bounce that does not stop, Command . (period) should do the trick.
    CCT

  • HT201210 I was updating my itunes on my ipad from my pc and my ipad has now shut down and shows a lock with arrow leading to itunes on screen. How do i unlock my ipad and get it working again?

    I was updating itunes on to my ipad from my pc and now my ipad has shut down and shows a lock with an arrow pointing to itunes. How do I unlock my ipad and get it back to working again?

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then... see Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Note.  Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

  • I was not aware of the automatic renewal of subscriptions and was chareged on 4/27 for another year of The Daily. How do I cancel the suscription and get reinbursed?  I have recently found how to manage and shut off future renewals. Can i get a refund?

    I was not aware of the automatic renewal of subscriptions and was charged on 4/27 for another year of The Daily. How do I cancel the suscription and get reinbursed? I have now shut off automtatic renewals. It would have been nice to know it was there to begin with!

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Time machine: I get the following message: The backup disk image "/Volumes/Data-1/Clemens's iMac.sparsebundle" is already in use - what to do? Where and how do I find that file and get rid of it?

    time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?

    I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
    Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time.

  • GET RESPONSE and GET STATUS

    Hi all,
    I wish some information about use of get response and get status commands or where I can find answer to my questions.

    Hi, GET STATUS command description can be found in GlobalPlatform 2.1.1 specification and ISO/IEC 7816-4 standard.
    GET RESPONSE is described in ISO/IEC 7816-4 and 7816-3 standards.
    Best regards,
    Eve

  • I have received an email receipt charging me $109.99 for an app I've never heard of and definitely never downloaded. How do I report the problem and get a refund?

    I have received an email receipt charging me $109.99 for an app I've never heard of and definitely never downloaded. How do I report the problem and get a refund?

    Log into your iTunes account, then click on previous purchases then select the purchased app and then click report a problem.  Then write and explain your problem and I am sure it will be considered. 
    Also change your iTunes password as soon as possible.

  • I "sent as gift" two songs to a friend. She can't find them. Are they sent to her in an email? Will they download during a sync? How can we recover the songs and get them to her iPhone?

    I "sent as gift" two songs to a friend. She can't find them. Are they sent to her in an email? Will they download during a sync? How can we recover the songs and get them to her iPhone?

    Try going to iTunes Store from the left column, then Account, then Purchase History, then Manage Gifts.

  • How to istall oracle forms service and oracle reports service and testing

    How to istall oracle forms service and oracle reports service ?
    and we can make test?

    How to istall oracle forms service and oracle reports service ?http://download.oracle.com/docs/cd/B19375_07/doc/frs/docs.htm
    and we can make test?Once installed, there is a test program both for Forms and Reports... or you mean something else ? if so, please clarify.

  • How to refund 10GB Icould storage and get full refund

    How to refund 10GB Icould storage and get full refund

    http://support.apple.com/kb/ht4847
    For a full refund, contact iCloud Support within 15 days of an upgrade or within 45 days after a yearly payment. Partial refunds are available where required by law.

Maybe you are looking for