How to auto display artwork?

I humbly apologize if this question has been asked and answered here before, but a search did not turned up any hits.
Could someone please tell me how to setup iTunes to display ALL album artwork automatically. It's a pain to having to go thru each and every album in your library to set them up one x one, this is especially true if you have a very large library.

You can select multiple albums (up to your entire library, if you wish), right-click and select Get Album Artwork. This will retrieve artwork automatically for all albums that are available in the iTunes Store (matched by Artist and Title - note that sometimes iTunes will fail to retrieve artwork if the metadata doesn't match, or in some cases will retrieve the wrong artwork). For everything that doesn't acquire artwork this way, there is (unfortunately) no method to add artwork other that finding or scanning correct images and adding them one album at a time.

Similar Messages

How do I display multiple seasons of the same TV Show?

I have two seasons of the same TV Show which displayed fine, including artwork. But when I purchased the latest season of Stargate Atlantis (Season 4) it displayed the new episodes in the same grouping as Season 3. Additionally, it replaced the Season 3 artwork with Season 4. How do I replace the Season 3 episodes with the correct artwork? How do I display the Seasons separately, but sequentially, the same way Music albums are grouped and displayed?

What version of iPhoto?
The general process is to select the photo and print, select the printer, paper size and print size and click customize and under settings selec multiples copies of a photo (the preview will reflect this choice) and click print to print, make any printer specific selections and click print to print
LN

Auto display the last data in array

How can I auto display the new data in array without the scroll bar?

If i understand you, you want show last data of array.
You have use property node: IndexVals. You write there indexes of array frome there you want show the data.

T440s Turn off auto display brightness

I'm trying to turn off the auto brightness on my T440 but nothing I found so far is working.
I edited all power plans and it turned off the Auto display brightness in windows 8.1, and i also disabled the "Display Power Saving Technology" in the graphics control panel under Power.
It's dimming even with cable plugged in. If the screen consists of mostly black images, it dims.. if there is white, it brightens.
Any help how I could fix this is appreciated! I have latest everything, all drivers, etc. I have latest System Update 5 update manager which downloaded and installed everything possible.

I seem to have fixed it.. but not sure what it was, I did a few things. I did another update which downloaded a Dependency manager which was critical.. and I also did a safe mode start which failed to start and nearly bricked the machine.. only a CD was able to revive the boot process.. it would boot to a blank screen with no start options even available.

Auto Display saved BP Code

Hi all
How to activate this auto display saved BP Code without searching from the selection button?
Kedalene Chong

Hi,
1. Run below query and assign this query in sales order customer field without selecting auto refresh option.
SELECT T0.[CardCode], T0.[CardName] FROM OCRD T0 WHERE T0.[CardType] = 'c' ORDER BY T0.[CardCode]
2. While creating Sales order, just press Shift + F2 to display BP code & Name
Thanks & Regards,
Nagarajan

How can I display XSLT transformer errors on a web page ?

Hi,
I have some JSP pages that access DB, create an XML based on DB data and then transform it into HTML through an XSLT stylesheet. Developing the XSL code it's easy to make mistakes and generate errors on trasformation, but what I receive on the web page is only a "Could not compile stylesheet" TransformerConfigurationException, while the real cause of the error is displayed only on tomcat logs. This is the code for transformation:
static public void applyXSLT(Document docXML, InputStream isXSL, PrintWriter pw) throws TransformerException, Exception {
        // instantiate the TransformerFactory.
        TransformerFactory tFactory = TransformerFactory.newInstance();
        // creates an error listener
        XslErrorListener xel = new XslErrorListener();
        // sets the error listener for the factory
        tFactory.setErrorListener(xel);
        // generate the transformer
        Transformer transformer = tFactory.newTransformer(new SAXSource(new InputSource(isXSL)));
        // transforms the XML Source and sends the output to the HTTP response
        transformer.transform(new DOMSource(docXML), new StreamResult(pw));
}If an exception is thrown during the execution of this code, its error message is displayed on the web page.
This is the listener class:
public class XslErrorListener implements ErrorListener {
    public XslErrorListener() {
    public void warning(TransformerException ex) {
        // logs on error log
        System.err.println("\n\nWarning on XEL: " + ex.getMessage());
    public void error(TransformerException ex) throws TransformerException {
        // logs on error log
        System.err.println("\n\nError on XEL: " + ex.getMessage());
        // and throws it
        throw ex;
    public void fatalError(TransformerException ex) throws TransformerException {
        // logs on error log
        System.err.println("\n\nFatal Error on XEL: " + ex.getMessage());
        // and throws it
        throw ex;
}When I have an error in the XSL stylesheet (for examples a missing closing tag), I can find on tomcat logs the real cause of the error:
[Fatal Error] :59:10: The element type "table" must be terminated by the matching end-tag "</table>".
Error on XEL: The element type "table" must be terminated by the matching end-tag "</table>".but on my web page is reported just the TransformerConfigurationException message that is:
"Could not compile stylesheet".
How can I display the real cause of the error directly on the web page?
Thanks,
Andrea

This code is part of a bigger project that let developers edit XSL stylesheets through a file upload on the system and we can't impose the use of any tool for checking the xsl. So, I need to display the transformer error on the web page.I see. This code is part of an editorial/developmental tool for developers to create and edit XSL stylesheets.
As part of the editorial process, XSL errors during editing can be considered a normal condition. In other words, it is normal to expect that the developers will generate XSL errors as they are developing stylesheets.
In this light, handling the XSL transformation errors is a business requirement that you need to handle. Using the Java Exceptions mechanisms, e.g. try / catch are inappropriate to handle business requirements, in my opinion.
I suggest that you look at how you handle the occurence of XSL errors differently than what you currently have. You need to:
(1) capture the Transformation exception on the server;
(2) extract the message from the exception and put it into a message that can be easily understood by the user;
The current error message that you have going to the web browser is not useful.
And you should not have the Transformation exception sent to the web browser either.
What you are attempting to do with the exception is not appropriate.
Handle the Transformation exception on the Business tier and use it to create a useful message that is then sent to the Presentation tier. In other words, do not send Java exceptions to web browser.
/>

How can I display True/False in my dropdownlist as "Yes" and "No"?

Hi All,
I want to bind a dropdownlist to a boolean value (so it's either true or false). I'm particularly interested in using two-way binding to when the user changes from "yes" to "no" the boolean value automatically changes from "true" to "false." But, I want the user to see "yes" and "no" as the options, rather than "true" and "false".
How can I display "yes" and "no" and still take advantage of binding? Or can I not use binding in this circumstance?
-Josh

Solution 1:
In order to display Yes/No for True/False, you may specify labelFunction for the dropdownList.
In MXML:
<s:DropDownList labelFunction="myLabelFunction" />
In actionscript:
private var arr:ArrayCollection = new ArrayCollection(["true","false"]);
            private function mylabelFunction(item:Object):String
                if(item.toString() == "true")
                    return "yes";
                else return "No";
OR
Solution2:
may be u can try making an array collection like
private var arr:ArrayCollection = new ArrayCollection([{label:"yes",value:"true"},{label:"no",value:"false"}]);
and specify labelField for the dropdownList like
<s:DropDownList labelField="label" dataProvider="{arr}" />

How can I display contacts in a relationship

I have companies in my CRM. I have a customers/contacts in the CRM I have tied as a relationship with each companies. How can I display all the records/contacts associated with a company? I have a already created a secure zone, so the company user would have logged in. Is this possible? If not, any workaround?
The only workaround I thought of is to use webapp to import the company data and create another web app containing the employees data. Then link both tables/webapp using datasource. But the way the client's data is structured could create a lot of problems going forward.
Any suggestion, help will be appreciated

The relationship feature and how companies work currently in BC is really limited. It is an association and not true relationships at the moment. You cant output a company and show all its relationships at the moment.

How can I display & split the audio & video from the same digitized clip?

I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
Am I asking too much of this software?
BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
Thanks in advance for any help...

Jordon,
"Am I asking too much of this software?"
No, you're not.
You first want to select your clip(s) and choose Advanced>Extract Audio.
This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
You can now edit and move the audio independently of the video.
With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
Matt

How can i display a list of all the names stored in the Mail app?

When sending an email, the program shows a list of names according to the first and subsequent letters that I type into the To: field. There are times I cannot recall someone's email user name. How can I display a complete list of all the names Mail has stored? I know that I can go to the To: field then type in the letter A, then write down all listings under A, and then repeat for each letter of the alphabet, but there should be an easier method.
I have perhaps dozens of names in Mail, but only five names in Address Book, so the latter does me no good.

On the menubar, Mail > Window > Previous Recipients
Regards,
Captfred

Importing cd's and suddenly can't see the recently added folder, have been unable to figure out how to re-display it, know the songs are going somewhere

Was importing cd's and suddenly can't see recently added folder, been unable to figure out how to re-display it, know the songs are going somewhere

See Restore Original Smart Playlists.
tt2

How do I display a GIF image stored in byte[ ]

I have a bit of sticky problem and am now stuck. I will post a little code in the hopes someone more clever than I can give me a hand
I am using a servlet to grab some data from a user, a web service (still within the servlet) is then called that generates a GIF of the user location as
specified by the address data grabbed from the user input (GET via the url parameters). The byte data is stored in a bean as a byte [ ] and added to the request as an attribute
via request.setAttribute().
I then forward to a jsp page that looks like this:
     <html>
     <head>
     <title>Learn Fast or Perish</title>
     </head>
     <body>
     <center>
     <hr>
     </center>
     <h1>Hello World.</h1>
     <jsp:include page="/display" flush="true"/>
     </body>
     </html>.../display maps to another servlet. The doGet portion of the servlet looks like this:
            //response and request are the HTTPServletResponse/Request doGet parameters
            //ImageByteInformation is my bean holding image info in byte [] format
            ImageByteInformation imageByteInfo = (ImageByteInformation) request.getAttribute("imageByteInformation");
            ImageIcon imageIcon = new ImageIcon(imageByteInfo.getByteData());
            Image image = imageIcon.getImage();
            //create a BufferedImage from the image
            BufferedImage bufferedImage = new BufferedImageCreator().createBufferedImage(image);
            System.out.println("BufferedImage length: " + bufferedImage.getHeight() + "BufferedImage width: " + bufferedImage.getWidth());//400 by 600
            System.out.println("BufferedImage string: " + bufferedImage.toString());
            //prints out: BufferedImage@93afae: type = 2 DirectColorModel: rmask=ff0000 gmask=ff00 bmask=ff amask=ff000000 IntegerInterleavedRaster: width=600 yada yada
            response.setContentType("/image/gif");
            OutputStream stream = response.getOutputStream();
            ImageIO.write(bufferedImage, "gif", stream);
            stream.close();... i found the code above on line and this is supposed to display a GIF to a web page.
For a while the code was actually prompting if I wanted to download a file of type "/image/gif"?!?
I did download and save it as temp.gif and the image was there when I opened it on my desktop.
Something is in the byte array but I cannot get it to display on the page. So what am I doing wrong.
So my question is this...
How can I display the gif info stored as a byte [] (byte array) in a bean with a jsp page. I thought including a servlet that
writes the bytes to the reponse would but no such luck. Is what I am trying possible? This newbie would greatly appreciate
any advice :)

First of all the following line is a little off:
response.setContentType("/image/gif");should be
response.setContentType("image/gif");What you should do is rather than do an include, try something like the following:
<img src="/display" />If you're telling me that /display is mapped to the servlet that has the doGet you reference, this would be the proper way to do it.
HTH.

How to not display nodes in a tree if Oracle roles are NOT used?

How to not display nodes in a tree if Oracle roles are NOT used?
We don't use Oracle DB roles to grant users access to Forms from the menu. We use a template and role system of our own. Basically a few tables with templates and roles.
We want to convert our normal Forms menu to a tree menu and one of our key requirements is that when the tree is populated ONLY nodes with programs (i.e. forms) he has been granted to execute is shown.
Since we don't use Oracle Roles how to do this in a tree?
I created a function to show/hide LEAF nodes, BUT problem is that there are sub-menu nodes showing even if the leaf-nodes under it has not being displayed. My function has suppressed it.
My tree query is like this:
SELECT
     t.status, LEVEL, t.label, t.icon, t.node VALUE
FROM
     tma_tree_menu t
WHERE
tma_authenticate_sys_chk_role(USER, t.node) = 1
CONNECT BY
     PRIOR t.node = t.master
START WITH
     t.MASTER IS NULL
ORDER SIBLINGS BY
t.position
The tma_authenticate_sys_chk_role will return 1 only if the user has access to the form under that node.
I tried the FTree functions in Forms but even that has nothing.
Any help would be greatly appreciated.
Edited by: Channa on Mar 17, 2010 6:49 AM

Would you share the source code? I guess what I need is how exactly you retreive the user credentials from the DB table and set that boolean variable.
and then how to condition it in UIX?

Portal Master-detail form how to auto assign detail record sequence number

Portal Master-detail form how to auto assign detail record sequence number.Please help me?

You can just read the following section
Can I specify a sequence number generator as the default value for a form column?
Yes. Enter the following in the "default value" field for the column:
#<schema name>.<sequence name>.nextval
where <schema name> is the name of the schema containing the sequence, and <sequence name> is the name of the sequence. The entry is preceded by a "#".
For example, if the schema name is "SCOTT", and the sequence name is "CUSTOMER_SEQ", the default value entry is:
#SCOTT.CUSTOMER_SEQ.NEXTVAL
same way you can do for master - detail form.
for more information on forms please refer the following URL.
http://otn.oracle.com/products/iportal/htdocs/portal_faq.htm#BuildingApplications
hope it helps.

How do I display array values in a text field?

Hi there-
I have a small Flash movie I'm trying to complete, it's my
first go around with Flash 8 so I appreciate your patience:
I built an array with some actionscript which seems to work
fine (I can trace it and all is well in the trace window). Now I'm
simply trying to display it to my Flash movie screen and I've built
a dynamic text window which is working, except that I only ever get
the last array element to appear in the dynamic text window. I've
traced the code and see all of my array values, but when I use
"myResults_txt.text=picker_array;" I only see the last position's
value in my array. I tried playing with the "multiline" attribute
for the text field, it didn't seem to make any difference.
I'm sure it's probably something silly that I've missed, but
how do you display an array, with all of it's values to a dynamic
text field (I even tried using the textArea component but ran into
the same problem).
Thanks in advance for any help-
rich

Thanks for your input. I tried just about everything but
ended up re-writing the contents of the array to a var and looping
through the var. Not my first choice but it got me to done.
Thanks again,
Rich

How to auto display artwork?

Similar Messages

Maybe you are looking for