How to auto fade or dip to black for many or all clips?

I'm working on credits, 50+, and page down is getting old fast. I would love to just select all and apply a dip or fade, any suggestions?

Select all clips, then go to Sequence > Apply Default Transitions to Selection. This assumes you've set your default transition and transition duration.
Can't remember if this is default (I think so), but the keyboard shortcut is Ctrl+Alt+Shift+D.

Similar Messages

How can I download a transfer without waiting for it be all transferred?

How can I download a transfer without waiting for it be all transferred? Thanks.

Thanks, that now makes sense. Once an item enters the download queue, the user cannot remove it. Either let it complete the download (easiest) or contact the iTunes Store customer support department through the Contact page (select the category and subcategory closest to the issue you're reporting and you'll find either an "Express Lane" button - just follow the instructions to get to the contact form - or an "Email Us" button) and ask them if they'll remove the item(s) from your queue for you.
Regards.

I have itunes And an icloud address on my iphone 5 How to get contents i buy or download for free from all categories to show on my pc or ipad and my iphone 5

I need to know how to enable itunes and downloads to show on all my devices Iphone and ipad and this PC also. icloud content to be available on all devices even if i download a free music app or tv show from itunes or the App store i want to know how to store it in the cloud and view it on all devices no matter which app or itunes store i downloaded it from. This is confusing me.

Karen0219 wrote:
no matter which app or itunes store i downloaded it from.
Sorry... But... You cannot use other countries itunes stores.
You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country...

How do I fade photo edges to black?

I am trying to figure out how to take a photo and fade the edges of the photo to blend in with a solid black background. Does anyone know how this is done?

Welcome to the forum.
As mentioned, several ways to do this.
I like a bit of this, and a bit of that, and ending up using a Layer Mask, with the Vignetting in it.
If your initial Image has your subject on the Background Layer, Dbl-click that, to convert it to a regular Layer, and either accept the default Layer Name, or choose something like "Image Layer." Add either a Color Layer (black) below that, or a New Layer, and Fill with black, then just create your Layer Mask, based closely on CurtY's instructions above. One can add a bunch of Filters to that Layer Mask, for different "looks."
The Layer Mask, when you Save as an Unflattened PSD, can be edited and re-edited forever.
Yes, several ways to do it.
Good luck,
Hunt

How trust worthy are the dip switch OC for the NF980-G65

Love the idea of just flipping a switch to OC, especially for someone like me that lacks experience over clocking. Just don't know how trust worthy it is to do it this way. I did try the first level setting at 10 percent. Jumped my processor from 3.2 to 3.5 very effortlessly. Also automatically boosted my RAM. I was messing with RAM timing in the BIOS around the same time and when I restarted my computer the video wouldn't display. Had to reset the CMOS and set the dip switches back to default to get everything working again. Now I'm afraid to try them again.
Anyone else have any success using the dip switch OC method?
ben

HI. I have a 785gm-e65 board wht switches. I have tried all settings, but 20 % got me the blue screen right off.
I am at 15% 3.68gz. The front side bus is at 230 and the cpu multiplier at 16x. all settings did one step on the
memory speed, i did not try to change anything. I run flight simnlator FSX and it has 3 cores at 100% and am stable.
gonna leave it this way for now. Klop :smiley:

Added a Song...How do I fade the song in the middle of a video clip?

I have a 5 minute video of my daughters first birthday. I added a song, but I want to accomplish the following:
Start the song 15 seconds into the video (after we sing happy birthday)
Fade the Audio roughly 2 minutes into the video so that I can highlight my older daughters voice
In between all of this I want to detach the background noise/talking from the video so only the song is heard.
There are only a few clips of the video that I want the voices to be heard, other than that, I just want the song to be the only audio.
Help???

Yes, you can do this.
1) Drag the song and drop it on the video clip at the point (15 seconds) where you want it to start. You drop it on top of the video clip - not in the background.
2) You will want to isolate the clips where you want your daughter's voice to be heard. If they are already separate clips, this is easy. But if they are part of one long clip, you can select the frames that you want to isolate by dragging with your mouse. A yellow border should be around these frames. Then EDIT/SPLIT CLIP. Or right-click/Split Clip. (Note: It is important to do this in the Project, not in the Event)
3) Once you have Split the clip, you can open the audio inspector and turn the volume down on those video clips where you want the clips to be muted. Turn the audio down to zero. For those clips where you want your daughter's voice to be heard, select the clip. Go to the Audio tab of the inspector, and turn on Ducking. Ducking will diminish all other tracks by the percentage you specify.
4) [This Video Tutorial|http://www.apple.com/findouthow/movies/imovie08.html#audioclips] is a good explanation of audio in iMovie. It is for iMovie 08, but most of it still apples in iMovie 09.

How to set up individuals on family sharing for using Facetime - all are saying it's me!

I've set up family sharing for my wife and kids. Currently all the devices are set up as me and linked to my email address and phone number. how do i separate them onto my wife's email / mobile no and then separate my kids (all under 13) so they can use Facetime etc? thanks!

Hello Mevster,
Welcome to Apple Support Communities.
It sounds like you want to change the Apple ID used by services, like FaceTime, on some iOS devices. Take a look at the article linked below, it provides a lot of information that should answer your question and walk you through the process of changing the Apple ID that's used for services on iOS devices.
Apple ID: What to do after you change your Apple ID - Apple Support
Take care,
-Jason

How do I undo the last Mac update for my epson all in one. It did work beforehand but does not now.

Yesterday I installed an Apple update for my Epson printer, but I cannot now print! Any ideas.

Restore backup taken prior to update.
Allan

Dip to Black - start at 50%

I always start my fade ins at 50% and end with 100%. Meaning it gradually transitions from black to the clip throughout the entirety of the transition selection. By default, Premiere sets the fade in at 0% and ends at 100%, hereby making it black for the first half of the clip then transitions into the clip.
The problem is that even though I start the transition at 50%, the clip still remains at total black until halfway through the transition, hereby ignoring my controls. In fact, if I set it to start at 50% and end at 50%...it still plays the default transition.
Is this a glitch I need to live with? Basically I'm having to double my transition sizes to compensate, which is silly. Any advice?

Ann,
What you're witnessing is not the glitch; that's actually correct in how Dip to Black should work. The Start and End values are not degrees/percentages of opacity, but are rather the percent of "completeness" of the transition. Since Dip to Black goes from 0% opacity to 100% opacity back to 0% opacity (relative to black, not the outgoing or incoming video), 50% in the transition completion SHOULD be 100% black. Here's a graphic representation (I didn't have time to paint it or build it to scale):
The white represents 0% opacity of the black of the transition, where the black represents 100% opacity. Think of the transition as a black solid that has the duration of the transition. By default, the transition starts with 0% opacity of that black solid, ramps up to 100% opacity halfway through, and then ramps back down to 0%. That's why, typically, if you start the transition at 50% (as the OP is doing) you are effectively creating a fade from black. By it's nature, Dip to Black (or White) is a double-sided transition, and therefore requires this reassignment of the Start or End value to achieve the effect.
Personally, I would never use Dip to Black for this purpose, even if it worked correctly with hardware MPE, as it's just too fiddly. However, regardless of the practicality of the technique, it does reveal an issue with hardware MPE.
To the OP: as Craig (shooternz) suggests, the following creates a fade of multiple layers without altering each individual layers transparency (which is a common issue, since a lot of people just throw dissolves on each layer to fade in/out):

Transition (Dip to Black) while using Track Matte

I have used Trace Matte to hide faces in a sequence. In order to do more than one person the sequence includes multiple Matte Tracks.
When I use the dip to black transition I am getting a fade to black and also seeing the mosaic then it goes to the next sequence. making the transition jerky.
If I remove all of the dip to black transitions that sequences all cleanly change.
Any suggestions to fix this would be appreciated.

Using transitions on multiple stacked clips can lead to some unwanted results, since you're changing the opacity of multiple layers at once, instead of en masse. Nesting would work, but then you'd need to extend the footage in your nests to create handles.
The simple way to do it is to create a piece of Black Video (File > New > Black Video), add it on a track above the transition point, and then create opacity animation up and down on it, or just add cross dissolves. The result is a dip to black that will not change the opacity of the underlying layers--it's fading black in and out over the layers.

GTX 680: Screen dips to black

Does anyone have a similar exsperience with the GTX 680, 4Gb card:
1. When scrubbing, the image in the composition windows will frequently dip to black momentarily - leaving only the layer wireframe placeholders - as though it's having difficulty keeping up with the demands made upon it.
2. When adding/removing nodes to a mask using the pen tool, the image dips to black for a second or so after each node is added/deleted - leaving visible only the mask path.
This was not a feature of the recently removed Quadro FX3800, 1GB card.
I have tried various preview modes - but to no avail.
It's irritating to say the lease!
Thanks.

Yes I am, Dave, thanks, and no it's not that.
Preview mode is set to adaptive resolution and the timeline updates as I scrub, but intermittently the content across all layers will cut out visually for a second or so - showing only the coloured inverted "V" image place markers. The image returns the moment I stop scrubbing.
I would expect the image to pixellate to a lower resolution whilst scrubbing - if it can't update fast enough - but it doesn't appear to do so.
Also, this doesn't explain the behaviour when using the pen tool (oultined above)....
As I said, this was not a Quadro FX3800 issue.
As an aside, In Adobe Forums, the text entry panel on my PC has started to display in Times Roman all of a sudden, but changes to the correct display font when posted. It's fine on my Laptop and iPad.
Am I having another senior moment?

I got a new computer. How do I make this the primary pc for all of my apple devices?

I purchased a new pc. How do I make this the primary pc for iTunes and all of my apple devices? I need to know how to take all Itunes files off old pc and put on new pc. Also, disable old pc.

Backup your library using this User Tip.
The same tool can be used to backup other important user data.
Deauthorise the old computer
Restore the library into the music folder of your new profile. (Use the same tool as for the backup)
Install iTunes and sign in to your account.
tt2

T530 Display gets black for seconds

I use my T530 with two monitors with extended desktop. The external monitor is the main display.
Since I updated to Win8.1, at irregular intervals (seconds or minutes) both displays gets black for a second, all windows are moved to the laptop-display for a short time and then back to the main display.
It´s extremly annoying and it is not possible to use the monitors seperate.
Sometimes there is a message, that the GPU is ready to save energy.
All drivers are current and from the lenovo homepage.
Has anybody an idea?
Thanks in advance.
Ulli

Do you have an Apple Care extended warranty because it sounds like the begining of inverter failure. If it is a bad inverter, that is a hardware failure and can't be fixed with software.

How do I fade to black in a slideshow?

It's been years since I've used Flash, so I'm a bit rusty.
But I am trying to use the slideshow presentation template and do
transitions between the slides, but I'm not getting the results I
want.
I'm putting in the preset behaviors for fade in and out, and
what I get is a crossfade. What I want is a fade to black, and a
fade up from black (a dip to black), and not a crossfade. Is there
a simple scripting way to do this that I can put on the
presentation (master) slide? If been playing with setInterval to
delay the transition but I can't get it to work. Thanks.

Add a "Fade Through Black" transition after your last clip.
For the volume fade, you can drag the Fade handles.
See this video for details. (Click on All New Audio Editing)
http://www.apple.com/ilife/video-showcase/

How to turn on auto fade?

When I flatten my comp I don't see the auto fades between the regions. How do I turn it on?

because Apple has most of its products, phones tablets and software that start with small letters despite being proper nouns, in Apple's world it's normal to use small letters for proper nouns and start sentences with small letters.
you will have to get used to the shift button and get a bit slow on your typing. after some time you'll get used to it.
this does sound frustrating but i agree with other users that the fact that you are using an expensive Mac does not relegate you to inferior word processors. go ahead and install office for Mac and enjoy!

How to auto fade or dip to black for many or all clips?

Similar Messages

Maybe you are looking for