How To Auto Hide the Icon Panels in Photoshop CS6?

I did go to the preferences and changed the icon panel to hide but it does not work... I also did what is suggested and exited the program to activate any changes and it still does not work. I've seen folks who produce tuts with this feature so I know its possible.
Thanks....

So you saying if you have the preference Auto-Collapse Iconic Panels checked and have a panel expanded from the collasped panels that
clicking somewhere in the document area doesn't collaspe the panel back to an icon?

Similar Messages

I have added audio to my PDF. How do I hide the icon?

I have added audio to my PDF. How do I hide the icon?

Thanks
I have just changed the size of it to very small instead so that it doesn't dominate so much and set it on auto play and am happy with that.
Thanks again

How do I hide the "preview panel" in Mail. Double clicking the "separator bar" hasn't worked ( I think I know where that bar is.)

How can I hide the "preview panel" in Mail? Double clicking on the "separator bar" , as directed by Mail Help, does nothing. ( I am not certain where that bar is, but believe it to be the zone where the preview panel and the message space meet.) This issue only arose after I upgraded to Mavericks.

Maggie 6 wrote:
How can I hide the "preview panel" in Mail? Double clicking on the "separator bar" , as directed by Mail Help, does nothing. ( I am not certain where that bar is, but believe it to be the zone where the preview panel and the message space meet.) This issue only arose after I upgraded to Mavericks.
The only way I found to hide the "preview panel" is to drag the separator to the edge of the window. It shrinks the panel down to perhaps 1/2 inch in height and then disappears only when you drag it to the bottom (classic layout) or perhaps a couple inches wide (in the new layout). It is also annoying to me that you can double click to open the preview panel but you cannot repeat that to hide it. [sigh]
I submitted feedback about the help file as well - you may want to do the same. I could not find the double click mentioned in the new "Mail Help" - I know it was in the old version.

Where is the animation panel in Photoshop CS6 extended?

where is the animation panel in Photoshop CS6 extended?

Glad that you located the Video/Animation selection.
If all is good, then please look over this article: http://forums.adobe.com/thread/1058744?tstart=0
Though you found the location, just after posting, as JJMack's Reply is correct, maybe mark it as such, to help others, who find your thread in a Search, just so that they will know that you got the answer, and that the correct place to look is known. That will likely help others in the future.
Good luck, and thank you for reporting your success.
Hunt

How do I create the copyright symbol in photoshop CS6?

How do I create the copyright symbol in Photoshop CS6, Windows7? Alt+0169 does not work.

I just use Character Map, and Copy/Paste the © symbol.
With the Alt+ keys are you using the numerical keypad, or the numbers at the top of the QWERTY? Is NumLk ON?
Good luck,
Hunt

How do you open the clone panel in Photoshop Elements 12, it isn't shown in the windows list

I am trying to access the clone panel in Photoshop Elements 12. The tutorials I have seen show a drop down list from the windows button, however on my drop down list there is no clone panel.
I guess my question is does PE12 have a clone panel and if so how do I access it?

I've never heard of a "clone panel" but the clone stamp is in the Enhance section on the right side, below the Healing Brush. If you see the pattern stamp there instead, just click the clone stamp in the tool options at the bottom of the window.

How do I get the trial version for Photoshop CS6 extended from the Creative Cloud Trial

Hello ...
Plz I wanted to downlad the trial version of Photoshop CS6 Extended and I followed this link
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop&loc=en_us
Then I chose this option : Option 2: Join Creative Cloud and download now (Recommended - it's free)
Then the adobe application manager has been installed and the photoshop CS6 started to be installed automaticaaly and after it done , I found it the standard version not the Extended ... So how and where can I get the Extended version for both 32 bit and 64 bit?
Your prompt reply is highly appreciated
Thank you ....

So if you download the trial from the trial page at http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop you get Photoshop CS6 Extended. When you then remove the trial and reinstall from the Adobe Application Manager with your trial Creative Cloud you only see the Standard version?
If this is so you can try reviewing your installation logs by following the steps listed in Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html. Although your 30 day trial has already begun. I would recommend for now you just remove the installation and install from the trial page so that you can try the extended features.

How can i hide the icons on my desktop

I have some folders that I placed on my desktop for now trying to organize them however I don't want to see the icons. How do I hide them.

This makes no sense to me. If you hide them how can you organize them. Please explain further what you are trying to accomplish.
You can open the desktop in the Finder and change the view to "list view"

How can I change the INTERFACE SIZE in PHOTOSHOP CS6?

Hi! I was just wondering how can I decrease the sizes of the interface in Photoshop? (e.g. the tool bar). My screen resolution is 1366 x 768, and most of the tools in Photoshop is occupying a bigger space in my screen. I feel that I can paint better if they are smaller. Do you have any idea how can I decrease the size of this interface?

I would collapse and expand the toolbar windows by using the double arrow icon?
Doing this will almost give you your full screen?
Or you can hit 'Tab' and it hides your tools when you don't need them?

How can I recreate the Clarity effect in Photoshop CS6?

Hi,
I want to recreate the Clarity effect but in Photoshop CS6.. I know I have it in Lightroom and Camera Raw, but for academic purposes I need to create the same effect but using ONLY Pohotoshop CS6...
Thanks,
Juan Dent
Message title was edited by: Brett N

The original "clarity" technique is just a Midtone contrast adjustment, the original idea as far as I know is from Mac Holbert formally of Nash Editions. Recipe is below but Mac used to have an action on his web site (I have it too and could send). Or build your own. Here's the steps:
Mac Holbert's Midtone Contrast
1. Highlight your top layer in your Layers Palette then:
2a. In CS I: Select Layer->New->Layer to create a new, blank layer at the top of your Layer Stack. Then, holding down
your Opt Key (Mac) / Alt Key (PC), select Merge Visible from the fly-down menu on the right side of your Layers Palette.
Be sure to keep the Opt/Alt depressed until you see the blank layer update. You should now have an additional layer at the
top of your layer stack. It represents how the image would appear if you had flattened your layers. Rename this layer
“Midtone Contrast”
-OR-
2b. In CS II: Holding down your Opt Key (Mac) / Alt Key (PC), select Merge Visible from the fly-down menu on the right
side of your Layers Palette. Be sure to keep the Opt / Alt depressed until you see the blank layer update. You should now
have an additional layer at the top of your layer stack. It represents how the image would appear if you had flattened your
layers. Rename this layer “Midtone Contrast”
3. Next double-click on the Midtone Contrast layer icon to bring up the Layer Style Palette. Change the Blend Mode to
Overlay and lower the Blend Mode Opacity to 20%. Now move the left “This Layer” slider to 70. Now Split away the left
side of that slider by holding down the Opt / Alt key and move it to 50. Repeat the same process on the right “This Layer”
slider, moving the sliders to 185 and 205 respectively. Then select “OK”.
4. Now select Filter->Other->High Pass. In the High Pass Palette set the radius to 50 and select “OK”. Now select Image-
>Adjustments->Desaturate. The Midtone Contrast layer is now complete. At 20% opacity it should be very subtle, but
noticable. The effect can be decreased or increased by raising or lowering the Midtone Contrast Layer opacity. I’ve found
that the proper setting can usually be found between 20% and 40% opacity. Above 40% one risks creating “halo” artifacts
that are visually distracting.

How to Auto Hide the Tree control

Hi,
     Iam struck with the new requirment in my project. I need to make the tree autohide when it looses focus.
I have some items in my tree on selecting the item, i should show the content of that page.
I guess i need to write some logic in Mouse Events...OnMouseOver event.
still i didnt have any clue to do this.
can any one help me with it...
Thanks.
Venugopal.V

Look in the CSS. Try using this line:     display:none;     on the div or class when visited.
Like this:
#YourDivName:visited, .YourDivName:visited    {
     display:none;
Now, the item needs to be in a div tag or a class tag in order for this to work and it needs to be a link but I have hidden tons of HTML using this code trick. I believe the off focus command also exists but you will need to research.
Good Luck,
Brett

How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud. I am sure I chose poorly at the 'keep file' window. Please help. My Brain hurts- 18 movies need to go-.

How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud. I am sure I chose poorly at the 'keep file' window. Please help. My Brain hurts… 18 plus movies need to go…. Thank you.

Instead of removing the music from the cloud or the iTunes library why not shuffle your music using a Smart Playlist which excludes the holiday music, or tracks that are not checked. For example, use this very simple Smart Playlist:

How do you auto hide the finder menu bar

Prior to Mavericks, I could auto hide the finder menu bar by inserting:
<key>LSUIPresentationMode</key>
<integer>4</integer>
in the finder info.plist after accessing core services/finderapp/contents/resources, but now in the Mavericks OSX, I receive the following error message:
"Finder Quit Unexpectantly" and a list of various reasons; codes; etc too long to list here. Is auto hiding the finder menu bar even doable anymore in this operating system, and if so what is the solution?

How do you reverse that process? I was trying it with various apps, substituting the app name in the terminal command and it worked great until I got to the "Notes" app. I think it messed up how notes synced with iCloud.
Thanks

How do I retrieve the tone panel in Lightroom 5 (with the sliders for exposure, contrast, vibrancy etc which sits under the crop, red eye etc icons)

How do I retrieve the tone panel in Lightroom 5 ( with the sliders for exposure, contrast, vibrancy etc which sits under the icons for cropping, red eye etc)?

On a PC, right-click (Mac Cmd-click) on one of the other panel headings such as Tone Curve, Detail, etc. In the context menu that displays, make sure there is a checkmark in Basic. Another quick way to do it is Ctrl->1 or Cmd->1.

How can I auto-hide the TOC

I'm using RoboHelp 8 and have a WebHelp project in which I'd like the output to auto-hide the TOC, allowing the user to click to open it if needed. There doesn't appear to be an option for that. Instead, the user can currently choose to close it, but it defaults to Open. Any ideas on how I might accomplish this?
Thanks in advance for your help!

Hi there
You might also check out my Skinny on Skins file. (freely available at the link below)
Click here to view
There are some ways outlined in it.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How To Auto Hide the Icon Panels in Photoshop CS6?

Similar Messages

Maybe you are looking for