How to auto reset delivery block in item level in sales order

hi i have one scenario. After creation of sales order it needs to be approved through work flow at item level so that without approval no delivery can be made. We have blocked the items in sales order now we want after approval the blocked status should be auto reset from block to free. how to do it.

Hi,
How is the approval taking place? Is it through work flow? If yes, You can write code for BDC or BAPI for removing the block after the approval step.
If it is manual approval, then you can write a program with BDC/BAPI for removing the block with input as sales order number.
Ask the approver to run this program after the approval.
Thanks,
Vinod.

Similar Messages

  • Delivery block at item level in sales order,Qty should not be confirmed

    Dear all
    We have a below requirment
    We will have multiple line items in sales order and put delivery block at item level.If delivery block is put at item level it should not confirm the qty and pass on to MRP
    But if we put at header level delivery block,schedule line qty at item level are not getting confirmed.So requirements are not passed to MRP-This is correct .Working as per SAP standard configuration.
    Can you tell how to activate the same for item level delivery block.if same delivery block is put at item level,it is confirming the quantity.But we don't want confirmation of qty to happen.
    Can you give us solution
    Regards
    Sudha

    We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
    Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
    Check the  customizing OVZ8: if the flag  Transfer of Requirement
    Transfer of requirements of the requirement class should be ON.
    In the sales order the requirement type is determined by the combination sales order item + MRP type.
    Refer SAP Help URL below
    [Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

  • Delivery & Billing Block at Item level in Sales Order ( Urgent)

    HI All,
    I am getting delivery & Billing block at item level when I create an order with config material.
    And I am unable to remove the blocks manually since they appear in display mode even in change mode of sales order.
    but I could see a biiling document for this order in document flow with 0 value.
    Note:
    1. The item does not have any reason for rejection
    2. Ther is no block set at schedule line category too.
    Please give me your valid suggestion as soon as possible since it is production issue.
    Thanks & Regards

    Hi Chandra,
    Please try with this
    Run VKM5 transaction with that delivery
    I hope it will help you,
    Regards,
    Murali.

  • Complete Delivery at Line item level in Sales Order

    Hello Gurus,
    While creating a sales order for some customers (the sales area tab in the customer master data has complete delivery and full delivery at item level), the complete delivery flag should be enabled and partial delivery flag at item level shoulb be C.
    We have a situation where this is not working in some cases. I need to know what user exits are copying the customer master data into the sales order fields. Please give me a lead how I can proceed with this.
    Regards,
    Balu

    Hi Balu,
    Please check user exits in program MV45AFZZ.
    i.e USEREXIT_MOVE_FIELD_TO_VBAK 
    Regards,
    Gumanti

  • Delivery address on item level in Sales Order causes delivery split

    Hi all,
    I have an issue where our customer is sending in EDI-orders with delivery address on item level. This generates different SAP addresses for each line in the Sales Order later causing a delivery split in VL01n. Normally a SO contains 20 items where 10 needs to go to one physical address and the other 10 to another. What I would like is to only split on the physical address and not on each SAP address. E.g. 2 deliveries created instead of 20.
    Its ECC 5.0.
    Anyone has experience to share on this issue?
    Thanks
    BR
    Peter

    We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
    Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
    Check the  customizing OVZ8: if the flag  Transfer of Requirement
    Transfer of requirements of the requirement class should be ON.
    In the sales order the requirement type is determined by the combination sales order item + MRP type.
    Refer SAP Help URL below
    [Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

  • User Exit for Updating Delivery Plant at Item Level in Sales Order

    Hello Experts
    There is a requirement to determine the delivery plant for each item level and than update the items with newly determined plant.  There is a user exit MV45AFZZ routine FORM USEREXIT_MOVE_FIELD_TO_VBAP. to update the item level entries in Sales Order in VA01 or VA02. Is this the right place to do this?, if yes , do i need to perform any other standard logic (like re determine Shipping points , schedule lines ) for newly determined plant? If not , can you please suggest any other place , BADI or user exit to change the delivery plant of sales order.
    Thanks a lot....
    -Harkamal

    Best place is MV45AFZZ-USEREXIT_SAVE_DOCUMENT_PREPARE. Populates the values just before saving the document. You can have your own deriving logic. Make sure that peice of code is trigger only for Sales Order create or change (VA01/VA02).
    Are you kidding???  You do realize that this is AFTER all validations against configuration, ATP, pricing, etc. have been performed??!!!  Never, ever change a critical value like plant in the SAVE user exits...

  • How to limit the rows in the item level in sales order

    hi
    i have created a sales order here my requirement is in item level there are so many line items i want to limit the line items to 5 num is it possible

    Dear chandra
    In billing it is possible.  But if you want in sale order, apply user exit in program MV45AFZB - USEREXIT_CHECK_VBAP. 
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    thanks
    G. Lakshmipathi

  • Delivery block on item level in ERP when document is changed in CRM

    Hi,
    we have integration order management from CRM replicated to ECC 6.
    each time we change the document in CRM, the item in ECC then will have delivery block.
    even the header delivery block is removed, the item will remain block for delivery.
    unless we manually remove the delivery block on item level for each item.
    what we'd like to have is standard delivery block on header level.
    any advice is really appreciated.
    JD
    Edited by: Jushan Djuwardi on Jun 13, 2008 4:13 AM

    Hello,
    I have tried to add a header delivery block in CRM GUI, or CRM Webclient,
    but didn't find the required field.
    Also, I have tried to set a header delivery block via a BADI implementation, but it cant be set.
    Does anyone knows if there is a possibilite for setting CRM header delivery block?
    The item delivery block can be set manually or via a BADI Implementation.
    Best Regards
    Jesus Padilla

  • Difference B/W Delivery plant  and item plant in Sales Order

    HI,
          May i know Difference between  Delivery plant and item plant in Sales order and what is the use of those fields.What is the process of raising sales order for different plants.
    Thnks&Rgds
    NAG
    Edited by: NAGA SUDHIR on Apr 3, 2009 6:10 AM

    HI G. Lakshmipathi,
                                   Thnks for the reply.Yes i am comparing (DWERK (at header level) and WERKS (at item level)) these two fields.
      Any how we can give only one plant in Customer Master, we are not maintaining Customer/mtrl regard (Not required in our company scenario) and we have extended MMR to different plants.
    So as per ur answer u went me to change only WERKS (at item level) while raising sales order for different plants.Is it enough?
    Thnks&Rgds
    NAG
    Edited by: NAGA SUDHIR on Apr 3, 2009 6:46 AM

  • How can we revise the pricing both at header and item level of sales order?

    Dear All,
      Now there's one issue of the pricing to me. i want to revise the pricing both at header and item level of sales order. but after i finished the cutomize and tested it, it's more different as i thought. i found that the pricing can revise at the one side only,for example, if i revise the pricing at item level and it's grey and can't be revised at the header. on the other hand, it's the same result what's happened at item.
      So, in my opinion, we can't revise the pricing both at header and item, right? if not, please give me more advices and teach me how to solve the problem. thanks a lot.

    Dear Lakshmipathi,
      Thanks a lot for your kindly and useful answer for me and I learn more for the pricing technology.
      I didn't notice the way that you reminded ago therefore I also saw the button at the condition tab. And your suggestion makes me know more.
      And I had tested the way that you said, I met with a question. Below is my opinion for my testing.
      I had created one SO and the pricing was $10, then I revised the pricing from 10 to 15 by VK11. It can't be updated automatically at SO and I must update it manually by clicking the "Update" button. This is OK for my testing, but I have another question to disturb you for the use of "Active" button. When I click the button and nothing is responsed, it's quite different what you said. So, please give more detail for the Active button. Thanks a lot.

  • Sending Alter Text by mail automaticlly on item level of Sales order.

    There is a 'Alter Text '  listed on the tabpage 'Texts' at item level in Sales order.  
    I want to send  content  of 'Alter Text '  by mail automaticly as end user change the text .
    How to implement this requirement?
    Thanks

    Hi,
    U can add the field in sales order header (Additional Data B tab). pgm name = SAPMV45A screen no: 8309.
    Regards
    Sathis

  • Block the Material at Item level in Sales Order automatically for delivery

    Hi!
    My business scenario needs a material to be Ckecked for Inspection after raising the Sales Order by thirdparty person. So, I need to block that particular material at Item level automatically for delivery and rest of the line items can get delivered. I can do this by selecting the reason for Block at Item level manually, but I want the system to get detemine this block. And one more thing is that there is NO Quality Management module for this. So, let me know what I need to configure for this effect.   Thank you.....

    hi,
    pl check the user exit " userexit_save_document_prepare" or "userexit_save_document".
    Take the help of your abaper to see if the logic written here can affect the item level block in the sales order for inspection. Create new reason for the item level block and have it triggered with this exit. Instead of hard coding which might require regular intervention of abaper for code changes for the business to be able to manage it, maintain a master data in the material master against some field with a key.
    now use that key to identify if these materials require to be blocked at the sales order level for inspection. To release this item again the user has to go in VA02 mode to release the block. Let this be done after the inspection of that material.
    regards
    sadhu kishore

  • Delivery tolerance at header and item level in sales order

    Dear All,
    My client wants to maintain delivery tolerance at both header and item level. NOTE: The tolerance at sales order header is different than the delivery tolerance at sales order item.
    eg if i maintain 3% plus and minus tolerance at item, the header level tolerance can be 2%.
    Also if there are more than 1 line items, the system should give warning message, when it finds that the delivery tolerance at item level can be maintained but that of the header level cannot be maintained and vice varsa.
    Awaiting an early help and thankful for the same in advance.
    Regards,
    Avnesh Kamdar

    Hi Avnesh,
    Delivery tolerance can be made in the customer master,sales org data ---delivery tab.
    Delivery tolerance is always at item level.
    Reward points if it helps.
    Regards
    Karan

  • Delivery of sub-items from a sales order

    Hi experts,
    We have a business requirement to be able to modify the customer's transmitted order line in a sales order. However, we would like to retain the customer's original order details.
    In order to do this, we wanted to capture the original request as a line item in the sales order with a item category not relevant for delivery and billing. We then create a sub-item for the original line with UEPOS populated for the sub-item. This sub-item is relevant for delivery and billing.
    However, we find that with the copy routine 101, SAP does not allow only the sub-item to be delivered. With the routine 110, SAP does bring in the sub-item, but blanks out the material number ( since it expects product substitution ).
    Would appreciate inputs from the forum
    Regards
    Rohit Zalani

    Hi Rohit,
    It is ideally required to have both higher item and subitem in delivery. However the moment there is a sub item, the delivery quantity for higher level item becomes 0 and hence this will not affect the quantity to be delivered. Hence the presence of higher level item will not impact the delivery or PGI in anyway. You can check this.
    Similarly for billing, you can check the Billing quantity field in copy control between delivery and invoice. The value has to be either G or H based on the scenario you want.
    Having said all these things, I think just adding the customer entered material either in the customer material field in sales order (I think VBAP-MATWA) or in some other Z field will relieve you of this big complexity. So unless or otherwise your customer i adamant on this, you can think of a simpler solution than the multiple levels of items.

  • Delivery quantity of items cannot exceed sales order quantity

    hi,
    Could you all please help me regarding how to block a transaction if the delivery qty. is more than sales order quantity used to make the delivery.
    we normally have multiple SO's to one delivery and also multiple deliveries to 1 SO
    regards

    Hi,
    Please refer to this threads
    Block the Quantity in Sales Delivery
    Approval Procedure for chaning quantity in Delivery Document
    Regards,
    Vijay kumar
    SAP Business One Forums Team

Maybe you are looking for