How to automate File Adapter Configuration

I am configuring a File Adapter manually then it generates WSDL file and jca files which contains File Adapter configuration. I have XSd file through the XSD can I generate these files (WSDL & jca)?

I have XSd file through the XSD can I generate these files (WSDL & jca)?No. Only adapter wizard should generate these files. Can you let us know more about your use case and tools you are working with?
Regards,
Anuj

Similar Messages

  • File name naming convention in File Adapter configuration in ID

    Hi All ,
    I have a query related to xml filename created in IDOC-XI-FILE scenario based on value of one of IDOC field .
    The scenario is like this :
    I have to send one xml file per store for material master . In this case how can I define my file name with store name in File adapter configuration in ID .
    Naming convention should be
    <b><storename>_date_masterdataname.xml</b>where store name is one of field of IDOC .
    Plz help me .
    Thanks in Advance
    Regards
    Prabhat Ranjan

    Hi Prabhat,
    take a look at this weblog:
    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
    you have to specify variable substitution
    (in the file adapter)
    and give the path to the store name (in the variable sustitution table)
    you <b>file name schema</b> (from the file communication channel can look like this)
    %storename%_date_masterdataname.xml
    Regards,
    michal
    Message was edited by: Michal Krawczyk

  • How to use File Adapter with hierarchial Structure?

    Hi,
    How to use File Adapter with hierarchial Structure like..
    Data:
    --Header Details:
    Line Item Details:
    Data
    Bcoz I am getting a Flatfile in a hierarchial way as shown below.
    Header Details :1
    Line Item a
    Line Item b
    Header Details :2
    Line Item c
    Line Item d
    Kishore

    Hey Kishore,
    In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
    check the link for the needed configuration paramters.
    If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
    If you have any question i'll be more than happy to assist.
    Nimrod Gisis

  • File adapter configuration parameter for "hexadecimal conversion"

    (File adapter for XI 2.0)
    Does anybody know the exact File adapter configuration parameters for reading a file with hexadecimal control characters as seperators. My file has
    3 types of seperators - i.e "2F", "05" & "0D2F"
    Eg: xml.fieldSeparator= "2F"
    When I specify this the file is getting split into fields
    at all the seperators in the file. I guess I am not using the right format in my defination ?
    Dorai

    Is there any special format for reading a file containing hexadecimal control characters?
    The file to be processed has hexadecimal separators:
    Field Delimiter        : '09' or '05'
    End of record delimiter: '0A' or '25'
    End of Table delimiter : '07' or '2F'
    Initially i would like to read the file into XI as it is i.e without any split by using "xml.fieldFixedLengths= "
    However, everytime I process the file(with hexadecimal contol characters), I have noticed that my file is getting split, even when I did not specify anything for field separator(i.e when i used fixed field length).
    Thanks,
    Dorai

  • How to use File Adapter in BPEL

    Hi,
    How to use File Adapter in BPEL. I am using Oracle SOA 10g. Any sample or best example in blog or elsewhere ?

    Hi,
    Please check the below links for samples on how to use file adapter in BPEL (in 10g/11g usage is same) and let me know any further queries.
    11g - http://blogs.oracle.com/theshortenspot/entry/soa_suite_integration_part_3_l
    10g - http://erpschools.com/articles/bpel-file-adapter-tutorial

  • How to use File Adapter Receiver to write attachments

    Hi,
    i have a scenario, in which our own XInotes adapter sends an XIMessage from an IBM Lotus Notes database into XI. This XIMessage contains an XML document as application main document and several PDF files as additional attachments 
    On the receiver side, i must use a File Adapter to write both the XML documents and the PDF attachments into a directory.
    The problem is i don't know how to use the file adapter receiver to write the attachments. In the Channel Monitoring, i can see that all PDF files are transferred to the file receiver. But the file adapter writes only the XML document into the directory.
    I've also tried the AF_Modules/PayloadSwapBean, but it can only swap one PDF file into the application payload. And the file name must be hard coded in the module configuration as swap.KeyName.
    Could anyone give me any ideas?
    thanks a lot in advance
    Xiang

    hi,
    receiver file adapters do not supprt attachments.
    Only File Sender adapter is capable of handling attachments not the receiver.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/a20c4cfea96b498b1e1af3f32f0670/frameset.htm
    Configuring the sender FILE adapter
    The sender file adapter is configured to pick the normal payload (file1.xml), which is specified in the File
    access parameters, and the additional image file (file1.jpg) that is to be sent as an attachment is configured
    under the Additional File(s) as shown in the screenshot below. The file type would still remain binary.
    Since, by default, XI sends payload and attachments in XML format, we need to call two beans, namely the
    MessageTransformBean and the PayloadSwapBean to help us is transforming the content to jpeg format
    and also change the file extension.
    The PayloadSwapBean module is used to replace the application payload of the XI message that holds the
    data with another payload which is appended to the message as an attachment. In our case, the payload
    would be file1.xml whereas the attachment would be file1.jpg
    The swap module is denoted in our scenario with the module key ‘swap’. It has two parameters from the
    MIME header.
    regards,
    pradeep.

  • Need help in file adapter configuration

    Hi,
       i am working on sps13 . while i am configuring the file adapter for sender        communication channel  i got a compulsary field "Queue Name" in processing    
    parameters . what should i make entry in that field ? plz....do reply.
    Thanks in advance.

    Hi Lakhman ,
    The parameter QualityOfService specifies how the Integration Engine should process a message. The following values are permitted:
    1)BE(Best Effort: synchronous processing). If QualityOfService is BE, the client is sent the final status for the processing.
    2)EO(Exactly Once: asynchronous processing with guaranteed execution exactly once). If QualityOfService is EO,processing occurs asynchronously and the client only recieves a confirmation of reciept with HTTP status '200'.
    3)EOIO(Exactly Once in Order: asynchronous processing using queues, that is, guaranteed execution exactly once and maintaining the sequence of successive messages). If QualityOfService is EOIO,processing occurs asynchronously and the client only recieves a confirmation of reciept with HTTP status '200'.
    Since u had choosen EOIO ,You must also define a queue name for EOIO:
    XI.QueueId=<QueueName>
    This queue name is used in the Integration Engine to process messages in the same sequence that they arrived in.
    This QueueName can consist of a maximum of 16 characters. If the first 8 characters contain 'SAP_ALE_', these r removed since this value is reserved by SAP and used internally.
    If a value is not specified for QualityOfService , the default value 'BE' is used.
    These r following websites which u wil find helpful:
    http://help.sap.com/saphelp_nw04/helpdata/en/0d/00453c91f37151e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
    http://documentation.softwareag.com/crossvision/xie311/admin/config.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
    Reward Points if u find it useful.
    cheers!
    gyanaraj
    [email protected]

  • How to schedule File adapter in XI 3.0 SPS 15

    Hi All,
    I have searched several forums , but not able to find it.
    I have a scenario were i need to schedule the file adapter .
    as i am using XI 3.0 SPS 15 there is no ATP option in RWB.
    Can anybody please share the step by step procedure of  how to schedule the adapter in XI 3.0?
    Thanks
    Sai.

    Hi Sai,
         You will surely have that option in RWB just check this link below...
    http://www.dataxstream.com/2010/11/configuring-availability-time-planning-in-sap-pi/
    Regards,
    Naveen

  • How to test File Adapter from EM Console

    Hi All,
    I have one issue with File Adapter where I am trying to implement a simple BPEL process. Below are the steps;
    1. I have created an empty BPEL process and then add a read file adapter to the left side which will read from a file aa.txt which is present in D:\work folder. File is having data like XXXX,YYYY,ZZZZ. (I have used Native builder for schema generation)
    2. Then I have added Write file adapter on the right side which will write to an other file bb.txt.
    Then I have rebuild and deploy this on weblogic SOA server but on the EM console I am not able to test it as Test button is disabled. Then how to test this scenario? Also I tried testing by placing a new file aa1.txt in the same directory with some content. Logically it should be picked up and then write it to the bb.txt but it is not happening.
    Can anyone please help me in this as how to troubleshoot it.
    Thanks
    RJ

    Thanks for the reply.
    So if i understood correctly it means that we cannot test it using EM console as we have read adapter on the left side because of which we have not exposed it as SOAP service. When we put any file in the D:\XXX then automatically read adapter will pick that up and create one instance in the EM console and then write adapter will write it into the destination file?
    But in our case no instance is getting created in the EM console even when I am copying a file to the directory. Below is the read_file.jca
    <adapter-config name="Read" adapter="File Adapter" wsdlLocation="Read.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/FileAdapter" UIincludeWildcard="rj*.txt"/>
    <endpoint-activation portType="Read_ptt" operation="Read">
    <activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
    <property name="DeleteFile" value="false"/>
    <property name="MinimumAge" value="0"/>
    <property name="PhysicalDirectory" value="D:\mywork"/>
    <property name="Recursive" value="true"/>
    <property name="PollingFrequency" value="60"/>
    <property name="IncludeFiles" value="rj.*\.txt"/>
    <property name="UseHeaders" value="false"/>
    </activation-spec>
    </endpoint-activation>
    </adapter-config>
    Please help as why it is not getting picked up?
    Regards
    RJ

  • Path in File Adapter Configuration [XI 3.0]

    Hi,
    when providing a relative path in the file adapter, which subdirectory will be used as parent directory?
    Furthermore, how can I address a network file system on a unix based host. Is it similar to
    hostname\dirfoo\dirbar\... like in a Windows environment?
    Thanks,
    Chris

    Hi Chris,
    The path provided to the File adapter should be the path on the sender/receiver system. For example, if your file is written to d:/usr/sap/trans/tmp this is the detail you should be providing to the file adapter.
    Note the use of '/' instead of backslash '\' used in the windows environment.
    Hope this helps.
    Kind regards
    Colin.

  • SP9 on PCK - file adapter configuration or Messaging System Test

    Hi,
    I have upgraded my XI 3.0 PCK from SP1 to SP9. This is fine but now I do not have the Messaging System Test JSP
    (I could not install the old one).So I would like to
    configure the file adapter to send to my adapter some outbound messages.
    I have tried configuring the file adapter as
    I do on full XI server but the file adpater on PCK
    just doesn't want to recognize the binding. No error logs, nothing. Any ideas what could be wrong ?
    Sincerely,
    Maxim Naidenov

    The configuration of the PCK is different to the XI.
    You need:
    Communication Channel:
    -> for Sender (File)
    -> for Receiver (XI) (Here you enter the URL of the XI)
    sender agreement (matching sender channel and interface)
    receiver agreement (matching receiver channel and interface)
    As the XI needs the same configuration for partner and service as the PCK, you should create two partners for PCK and XI and assign the sender channel to the service belonging to the partner PCK and the receiver channel to the service belonging to the partner XI.
    I hope that helps
    Stefan

  • Response File adapter configuration

    Hi Experts,
    My scenatio is syncronous scenario ( File to sync SOAP to File). It picks up a file , calls syncronous web service using SOAP adapter , get the response and we need to create a file of teh response.
    My problem is to the service response into file.
    In IR i have done following things:
    1. Oubound synchronous input Message interface
    2. Inbound synchronous service Message Interface
    3. Message mapping for both request nad response
    4. Interfce mapping for the one Message Mapping
    In ID
    1. file sender Comm channel
    2. SOAP reciver comm channel
    3. one recvr determination for file to service inbound message
    4. One interfcae detmination for service inbound message and interface mapping
    5. one sender agreement and one recvr agreement.
    Now i am not sure how use the second file adapter for writing file.
    kindly help.

    thanks for your replies, the link was really helpful but I am getting error in my File sender channel:
    Error: com.sap.aii.af.service.cpa.CPAException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=SHDCLNT100;TS=SICCEB_DocService;AN=;ANS=;
    becuase of this error,  file receiver channel is not getting triggered.
    I have checked all the agrrements and and interface detmination. Kindly suggest what can be the reason .
    Thanks a ton for your replies.

  • Guide me how to automate UME LDAP Configuration

    Hello colleagues,
    I am not sure if this is the right place for putting my question.
    We wanted to automate 'UME LDAP Configuration with Microsoft AD', because we have nearly 25 portals and has to be refreshed for every 3 months from different systems. Instead of configuring UME  every time, we wanted to automate it such that
    it can be done by one click for each portal.
    I am not aware, if it can be done through Webdynpro or Java API.
    Please let me know in which way we can achieve this functionality. If it is in Java then please let me know how to access UME APIs. Moreover Configtool will not save its data at O.S level, it stores in DB.
    Please guide me on achieving this.
    Regards,
    kasi

    Hi Nivas,
    thank you very much for your answer.
    Could you please let me know any APIs to use these functions
    I googled and found APIs for User management ( creating,deleting ,etc..) only.
    I could not find any APIs for LDAP settings in Configtool.
    I wanted to set these values ( which are specified in above link ) from out side.
    Regards,
    venkat
    Edited by: Venkata Kasi G on Mar 2, 2012 2:41 PM

  • File adapter configuration

    Hi ,
    In file adapter, when we use quality of service:EOIO ,it asks for Queue name,what do we have to give there?
    Thanks

    Hi Guys
    When I use EOIO it gives me the below error,it works fine with EO for quality of service.What is causing the error.I am using in file sender adapter.
    Thanks
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!-- Call Adapter -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

  • Reciever file adapter configuration for Deep structure

    Hi Experts,
                     I have a idoc to file scenario in which i used a data type for file in below format:
    DT_Test
    -->Recordset(0.unbounded)
    >E21DPU1(0.unbounded)
    >field1
    >field2
    >E21DPU5(0.unbounded)
    >filed 3
    >filed 4
    >E21DP03(0.unbounded)
    >filed 5
    >filed 6
    Here DT_test is datatype name,Recordset is a structure name which contain E21DPU1, E21DPU5,E21DPO3 stucture inside it.Now,E21DPU5 and E21DPO3 structures are under E21DPU1.
    I am confused in creating content conversion parameters i.e what we have to mention in Recordset Stucture .
    I used E21DPU1,,E21DPU5,,E21DP03,* .should it work for deep structure.
    Thanks
    Deepak

    Hi,
    file adapter does not handle 2 level deep structures
    the easiest way to do it now is to go for abap or java mapping
    and create a line for each of the output lines and handle this in the file adapter
    so like <line> </line>
    <line>E21DPU1(0.unbounded) with fields </line>
    <line>E21DPU5(0.unbounded) with fields </line>
    <line> etc. </line>
    Regards,
    Michal Krawczyk

Maybe you are looking for