How to automate Global Opt-In in EMOD??

Global Opt-In. The recipient can click this link to subscribe to all emails sent by the company.
Unlike the Global Opt-Out response, there is no automated update associated with the Global
Opt-in link.
Since Global Opt-In is not updated automatically. How can I automate this in EMOD?
Regds VK
Edited by: 793773 on Nov 2, 2010 12:07 AM
Edited by: 793773 on Nov 2, 2010 12:08 AM

VK, there is nothing OOTB that would automate this. Using partner Gryphon Networks may be able to help b/c they can manage lists automatically. Normally, users run a report following a campaign to find out who clicked this link. Then those Contacts are updated via Import Wizard with the new information.

Similar Messages

OB52 Posting Period Close: Does anyone know how to automate the close?

Does anyone know how to automate the FI Period Close (trans code OB52)? Currently, the business users go into the screen and open and close any periods manually. For the MM period close, we are able to do so because we found the program to use in the batch job. For some reason, the FI side shows the program SAPL0F00 but this is only a view and will not allow a batch job to be created. Does anyone know of the actual program used for the FI period close?

Use program RFPERIOD_OPEN. It may help. For further details you may check the following thread.
RFPERIOD_OPEN

How to embed email opt-in form in image

How to embed email opt-in form in image

You cannot delete the email field. It is required for the form to work. One thing you can do that is a bit more work is to use Adobe Forms. I believe it is at Quickly & Easily Create Online Forms and Surveys | Adobe FormsCentral and create the form you want there and then you can copy the embed code from it and use the insert HTML to embed the form in your page.

How to Automatically generate .XSL file of XML file ???

Hello Everyone,
I have UI which provide the facility to create own format by using drag and drop utility. I have also xml file which contains the data. Now task is how to automatically generate the .xsl file of the dynamically designed format for the data stored in xml form.
If you have any idea about the solution of the above problem.
I will thankful for any help regarding this
Thanks
B. Kumar

XSL stands for EXtensible Stylesheet Language, and is a style sheet language for XML documents. .xsl is the extension of the XSL file.Thank you, I am aware of all that.
When we design any format by using drag & drop utility, System has to generate the .xsl file (extensible stylesheet for the xml document).Why? To accomplish what?
And then .xsl file is used to display the data which is stored in xml document on the webpage with designed format.So you need to define the mapping between XML and HTML? and you're hoping to do that automatically?
That's a job for a user interface designer. Not a tool.
In brief we need to write a parson
Parser
which will take any designed format and generate the .xsl file for that design, to display the data which is stored in XML document.Doesn't make sense. It would make more sense if you started from a schema. Starting from an actual XML document, i.e. an instance of the schema, no, not even slightly.

How to configure global transaction wthin Oracle AS JMS and Oracle JMS

How to configure global transaction if I take a message from Oracle JMS(AQ) and send it to the Oracle JMS?

Which version of OC4J are you working on?
In OC4J 10.1.3.x, presume your OC4J JMS listens messages via MDB which uses a resource adapter as a message listener. The resouce adaper could be the generic JMS adapter deployed in OC4J as the default.
Resource adapter configuration to support MDBs is included in the standard ra.xml file, which lists the message listener types that the resource adapter supports.
The MDB developer or deployer configures the MDB in the ejb-jar.xml file, through a <message-driven> element.
In addition to above, configuration in the ejb-jar.xml file specifies whether an MDB uses transactions.
1) The <transaction-type> subelement of <message-driven> in ejb-jar.xml has a value of Container, and the <trans-attribute> subelement of <container-transaction> (under the <assembly-descriptor> element) has a value of Required. In this circumstance, if there is an imported transaction, then message delivery and related work are performed within that transaction. If there is no imported transaction, OC4J creates a transaction, and message delivery and related work are performed within that transaction.
2) The <transaction-type> subelement of <message-driven> in ejb-jar.xml has a value of Bean. In this circumstance, the MDB manages the transaction. If a transaction is imported, OC4J will suspend it before the message delivery method call to the MDB, in order to avoid conflict.
Message delivery is not transacted if the <transaction-type> subelement of <message-driven> in ejb-jar.xml has a value of Container, but the <trans-attribute> element has a value of NotSupported. If there is an imported transaction in this circumstance, OC4J will suspend the transaction before the message delivery method call to the MDB.
Details could be found from OC4J Resource Adapter Guide.

How to automatically detect server ip address

does any one know how to automatically detect an ip address of a server from the client with a socket based connection ?
instead of prompting the client to connect to the server ip address which is trouble some.

You must start with some initial information and a known environment.
There are several possibilities after that.
- The server has a 'name'. This is not an ip address but a name like "yahoo.com". When you connect using that, even if the IP changes, the correct IP will be returned. (At least ignoring an annoying bug in some VMs)
- A specific IP address
- Use a methodoly to 'request' a server address. One version of this is to use a UDP broadcast another version uses a service manager (which itself must be found.)

How to automate the flatten transparency in illustrator?

How to automate the "Flatten Transparency option" in illustrator via javascript. Please share with me.
Thanks

I'm looking for the same thing.
app.executeMenuCommand('Flatten Transparency'); works in CC but all it does is it brings up the window and you still have to click OK to make the script continue.
Before anyone asks why do you want to do it etc. In print thereare instances where you have to open and edit (not text) large numbers of pdfs to change colours, outline fonts etc otherwise there's trouble on print devices.
My script for instance looks for 100K blacks and replaces them with rich black, looks for empty text frames, overprint, bleed settings, clipping paths etc.
The only way to edit successfully a pdf without fonts is to place it and flatten transparency outlining fonts and then work on it.
So back to the point. After the window pops up, is there a way to simulate a keystroke like "Enter" or maybe app.executeMenuCommand('Flatten Transparency'); takes arguments like:
app.executeMenuCommand('Flatten Transparency',preset_name);...?
Anyone? Adobe SDK team? :-)

How to automate a redundant task on PC to "Include Prefix when Numbering Pages"

I work in book publishing and we're generating indices using the book feature. The big problem is that for the print version we need the folios styled a certain way "without a prefix" but to create our index in the book feature, the prefix needs to be turned on.
Is there any way to do any kind of drag and drop so I don't have to open every chapter of the file to turn the prefix on? Though it doesn't take long, it's repetitive and has to be done every time we update our books. (The "Section Prefix" information is alreay inserted, it's just a matter of toggling it on or off depending on what doing in the InD file.)
I do not write scripts. It seems like a simple task but would take me months to figure out. If you can send me to someone who can figure out how to automate this task, I would greatly appreciate your help.
Macgrunt was able to help me but then I realized I was on a PC. Is this something that can be done in Javascript?

Here's a version that batch-processes the selected folder with InDesign documents as you asked in PM.
Main();
function Main() {
    var inddFile, doc,
    inddFolder = Folder.selectDialog("Choose a folder with InDesign documents.");
    if (inddFolder == null) exit();
    var inddFiles = inddFolder.getFiles("*.indd");
    if (inddFiles.length == 0) ErrorExit("Found no InDesign documents in the selected folder.", true);
    for (var i = 0; i < inddFiles.length; i++) {
        inddFile = inddFiles[i];
        app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
        doc = app.open(inddFile);
        app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;
        sections = doc.sections;
        for (var j = 0; j < sections.length; j++) {
            sections[j].includeSectionPrefix = true;
        doc.close(SaveOptions.YES);
function ErrorExit(error, icon) {
    alert(error, scriptName, icon);
    exit();
You can also use this script to run a script or a set of scripts on a bunch of files. (Warning! It's not totally tested)

How to automate the queries

hii everyone
I want to automate queries.i.e they should be executed automatically on a particular day in the week. can we do it through oracle jobs..actually wht the case is i will be executing 5 queries evey tuesday.the output frm these queries are used to process another job tht runs every tuesday evening.rather than executing all these queries everytime i want to automate these queries.
can anyone help me how to automate this job.
thnakx

hii justin
thnkx for the reply..
the queries wht im executing are little bit complex.one query is dependent on the other..im sending u the steps wht i will be doing when the queries are executed
Below mentioned are the steps to be followed to check if the rewards job ran successfully or not –
1.     Run the QUERY #1 in Rewards_Queries_Weekly_Test.sql
2.     Note down the number of records returned in STEP 1.
3.     Run the QUERY #2 in Rewards_Queries_Weekly_Test.sql.
Enter current date as INPUT parameter.
4.     Note down the number of records returned in STEP 3.
5.     Compare the number of records returned in STEP 1 and
number of records returned in STEP 3. BOTH THE NUMBERS
SHOULD MATCH TO PROCEED TO NEXT STEP.
6.     Copy the results of QUERY #1 to an excel sheet. Do not copy
the serial number generated by PL/SQL Developer.
Copy only the fields returned.
7.     Copy the results of QUERY #2 to an excel sheet.
Do not copy the serial number generated by PL/SQL Developer.
Copy only the fields returned.
8.     Assuming that the results of QUERY #1 were copied to the
columns A1 & B1 and the results of QUERY #2 were copied to
the columns D1 & E1, copy the following formula
to F2 =IF((A2=D2)*(B2=E2),0,1)
9.     The output of STEP 8 would be either 0 or 1 in the cell F2.
1 indicates the records with mismatch and 0 indicates the correct
records which can be ignored. It is possible that the records with
mismatch have an entry in job special pay table and these records
also can be ignored. These records can be filtered
by following next steps.
10.     Copy the data in the cells D1,E1 and F1 to H1, I1 and J1 respectively.
While pasting use the option paste Special and select Values option
in the dialog box.
11.     Sort H1, I1 and J1 data by J1 descending and next by H1 ascending.
This would list all the in correct records first and correct records next
so that they can be ignored.
12.     Now run the QUERY #3 and copy the results to K1. Do not copy the serial number generated by PL/SQL Developer. Copy only the fields returned. These records indicate the rewards special pay records given in the last one week.
NOTE: The QUERY #3 expects two dates in the IN clause. These dates should be Current Date (Since the reward jobs run on Tuesday it will be always current Tuesday’s date) and Last Tuesday’s date.
13.     Select all the incorrect records in the cells H1, I1 and J1 and apply
the following conditional formatting formula with format as RED color.
= VLOOKUP($H2,$K$2:$K$220,1,FALSE) <> " "
NOTE: In the above formula change the value of K$220 based on the number of rows you get in the cell K from the results of QUERY #3.
14.     The records with BLACK color are the actual records with some issue. Investigate each record manually and analyze the issue. Keep negative hours adjustment, 26 weeks rule in mind while doing so.
the above are 14 steps i will be doing every tuesday when im executing the queries
i want to automate the whole process wht im doing in the 14 steps..
could u suggest me something on this
srikanth

How to automate the deletion of existing request

Hi ,
I want to delete the existing old requests under Cube . How to automate this process .
Please can anybody help me .

Hi,
This code deletes <b>all</b> requests seuential from one particular cube determined by parameter I_Cube. Please create a variant with name of desired cube
and a batch job processing this variant.
REPORT Z_DELETE_REQ_FROM_IC.
DATA: I_T_RSICCONT TYPE TABLE OF RSICCONT.
DATA: WA_RSICCONT TYPE RSICCONT.
PARAMETERS : I_CUBE TYPE RSINFOCUBE .
IF I_CUBE IS INITIAL.
EXIT.
ENDIF.
SELECT * FROM RSICCONT INTO TABLE I_T_RSICCONT WHERE
         ICUBE = I_CUBE.
LOOP AT I_T_RSICCONT INTO WA_RSICCONT.
CALL FUNCTION 'RSSM_DELETE_REQUEST'
    EXPORTING
      REQUEST                    = WA_RSICCONT-RNR
      INFOCUBE                   = WA_RSICCONT-ICUBE
    EXCEPTIONS
      REQUEST_NOT_IN_CUBE        = 1
      INFOCUBE_NOT_FOUND         = 2
      REQUEST_ALREADY_AGGREGATED = 3
      REQUEST_ALREADY_COMDENSED = 4
      OTHERS                     = 5.
IF SY-SUBRC <> 0.
open for error-handling
ENDIF.
ENDLOOP.
Please use it carefully
Regards
Joe

How to automate the payment program proposal creation

Hi Experts,
Another question, as we have to automate the creation of the payment run and its proposal run and then the list should go to specified person, who will check and then the payment run will be executed manually in the system.
How to automate this?
Thanks,
Atif

Hi,
For payment run parameter generation you can use the program SAPF110S and for the proposal run execution you can use the program SAPFPAYM_SCHEDULE.
Schedule these programs via a batch job on periodic basis in steps and give the intended recipients in the spool recipients.
Regards,
Gaurav

How to automate the data load process using data load file & task Scheduler

Hi,
I am doing Automated Process to load the data in Hyperion Planning application with the help of data_Load.bat file & Task Scheduler.
I have created Data_Load.bat file but rest of the process i am unable complete.
So could you help me , how to automate the data load process using Data_load.bat file & task Scheduler or what are the rest of the file is require to achieve this.
Thanks

To follow up on your question are you using the maxl scripts for the dataload?
If so I have seen and issue within the batch (ex: load_data.bat) that if you do not have the full maxl script path with a batch when running it through event task scheduler the task will work but the log and/ or error file will not be created. Meaning the batch claims it ran from the task scheduler although it didn't do what you needed it to.
If you are using maxl use this as the batch
"essmsh C:\data\DataLoad.mxl" Or you can also use the full path for the maxl either way works. The only reason I would think that the maxl may then not work is if you do not have the batch updated to call on all the maxl PATH changes or if you need to update your environment variables to correct the essmsh command to work in a command prompt.

How to automate the exchange rates in BI

Hi Guys
can any one let me know the step by step approach of how to automate the exchange rates in BI...I know that if we right click in source system and say transfer exchange rates ..we will get those values ....But I want to automate this process in BI with a Process chain...I have created a start variant and connected it to a ABAP process type and calling the RSIMPCURR programm in sync..local....Do I need to call any Program event ? Iam not able automate this..please advice step by stepp
After ABAP process type do I need to create any other steps ?
regards

Hi,
All you have to do is to define the ABAP Process as new process variant, call mode syncronous, called from local, program name RSIMPCURR, and define a program variant for example number 12 and create it, there you select the update exchange rates., go to attributes, give a meaning and save all. You can automate the start of the porocess chain and select it as period job.
Regards
MK

How to automate the Acrobat Reader plugin in Internet Explorer

Hi,
I have been trying to figure out how to automate the Acrobat Reader plugin in Internet Explorer. My goal is to find a way to allow users of our web application to print PDFs to the default printer without having to go through the plugin's GUI. Our application includes a browser helper component, and I had hoped it would be possible to use the IWebBrowser2 interface's get_Document() method to get at some sort of interface to the plugin (as is possible for, say, a Word document hosted in Internet Explorer) and then use this to print the document. However, this does not work: get_Document(), when called on an IWebBrowser2 instance with a PDF loaded, returns E_NOINTERFACE. I also tried calling the IWebBrowser2 interface's ExecWB() method with OLECMDID_PRINT, OLECMDEXECOPT_DONTPROMPTUSER, and PRINT_DONTBOTHERUSER, and printed a blank page rather than the PDF.
Is it possible to do what I am attempting? Like I said, my core goal is to print a PDF from within Internet Explorer without requiring user interaction. I'd appreciate any suggestions as to how I might accomplish this -- it doesn't _have_ to be by automating the plugin (maybe that is a the wrong approach... though it sure would be nice if the plugin provided access to its object model via IWebBrowser2->get_Document()).
Thanks in Advance,
Steve Mckinney
Senior Developer
Paxon Corporation

IF that were entirely true, then the whole purpose of this thread is moot (automating printing server side). It is possible to load the file via URLs using the following html code:
"<"body>
"<"OBJECT id="pdf"
type="application/pdf"
width=800
height=600 >
"<"param name="src" value="http://localhost/pdfs/vorder_nc.pdf"/>
"<"/OBJECT>
"<"script language="JavaScript">
function waitLoad()
setTimeout("printFile()",2000);
function printFile()
var objPdf = document.getElementById('pdf');
objPdf.PrintAllFit(1);
"<"/script>
"<"/body>
So, if I used php or some other scripting language on the server to fill in the name of the pdf, I can load it via a URL, wait a couple of seconds for it to load, and then print it without user interaction. I wish that the LoadFile method would load a URL so that when it returns, I know it is loaded and I don't have to put faith in a timer that may not be enough for a large file.
This is the situation I'm in. This way works but I don't like the timer. I'd rather have the plugin let me know when it's loaded. Is there another method that can help me do what I want?
Thank again.

How to automate the data flow to content servers?

We have ECC connected to CS. Could you help tell how to automate the data flow into the CS? Thanks a lot!

What do you use the Content Server for? If its for archiving you need to run the STORE job to send the data to the CS.
I can't see a reason to automate that process
Regards
Juan

How to automate Global Opt-In in EMOD??

Similar Messages

Maybe you are looking for