How to automate "wallet open" operation in standby instance?

My database is 11.1.0.7 and 11.2.0.3 with TDE tablespace encryption, ASM db storage.
The wallet needs to be opened for MRP to work in physical standby database. I already have the solution for the primary instances to automate wallet open (e.g. using startup trigger for 11.1.0.7). However, I cannot find solution to automate wallet open operation in standby instances (to issue ALTER SYSTEM SET ENCRYPTION WALLET OPEN IDENTIFIED BY ""').
Manual operation everytime standby instance is started is not feasible. Has anyone come across the solution for this?

You can create auto open wallet (open owm utility, go to File -> Open (to open your wallet in owm), then go to File -> Auto Login (check) then go to File -> Save). You can do this on primary and standby instance.
Now every time database is opened, wallet will be automatically opened too. You shouldn't use triggers.
Zoran
Edited by: Zoran Pavlovic on Dec 15, 2012 1:42 AM

Similar Messages

How to automatically open last opened document when Reader launches?

How to automatically open last opened document when Reader launches?

Install this Add-on:
*'''''New TabURL''''': http://sogame.awardspace.com/newtaburl/
*then set the options in Add-ons > Extensions > New TabURL > Options
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How to make Firefox open automatically a new, empty tab in each start, but keep last sessions?

How to make Firefox open automatically a new, empty tab in each start? (keep last sessions as well) It will be good, because Firefox wont load the previous sessions last watched tab after start straight away, but keep my previous sessions tab as well in the browser.

Hello,
You can change your home page settings to open a blank tab:
* Tools (or [[Image: New Fx Menu]]) > Options > General
* Beside "Startup", change to "Show a blank tab"
* See the article [[Startup, home page and download settings]] for more information
To retrieve your previous browsing session, first make sure that you are not running in [[Private Browsing - Browse the web without saving information about the sites you visit|Private Browsing mode]]. When you start Firefox, to recover your previous session, you can go to:
* History (or [[Image: New Fx Menu]] > History) > Restore Previous Session
* Please see [[Restore previous session - Configure when Firefox shows your most recent tabs and windows]] for more information

How to make Finder open automatically...?

How to make Finder open automatically when I insert external drive?

Make sure the Finder preferences are set to display hard drives:
OT

My mac version is OSX 10.9.4 and I just set up my Apple Mail with Yahoo! IMAP. My question is how come when I open my mac contacts, The operation couldn't be completed. (CoreDAVErrorDomain error 3.) is shown?

My mac version is OSX 10.9.4 and I just set up my Apple Mail with Yahoo! IMAP. My question is how come when I open my mac contacts, The operation couldn’t be completed. (CoreDAVErrorDomain error 3.) is shown?

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

How to stop iphoto opening automatically.

Hi everyone,
I have forgotten how to stop iphoto opening up when I put my camera memory card in the reader.
I have Snow Leopard 10.6.8 and I am now using Photoshop Elements 6 on my Macbook.
Thanks in advance and a happy and healthy New Year from England,
Alan

Hi,
Thanks for your quick answer but I managed to do it through Image Capture.
You have to have the camera or reader connected then open Image Capture.
I clicked on the device ( name of card reader ) and in the bottom left I could choose from a drop down menu where I wanted the card to open.
Thanks again,
Alan

I keep getting this message (Your browser security settings don't permit the editor to automatically execute copying operations.) how do I fix this?

I keep getting this warning (Your browser security settings don't permit the editor to automatically execute copying operations.) Help

See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/852 - AllowClipboard Helper

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

How to create online log in standby instance?

Oracle say that:
Step 3 Create an Online Redo Log on the Standby Database
Although this step is optional, Oracle recommends that an online redo log be created
when a standby database is created. By following this best practice, a standby database
will be ready to quickly transition to the primary database role.
The size and number of redo log groups in the online redo log of a standby database
should be chosen so that the standby database performs well if it transitions to the
primary role.
But when I execute "ALTER DATABASE ADD LOGFILE ('/opt/oracle/oradata/orcl/redo01.log') SIZE 50M;" in standby instance,I get the follow message:
ORA-01275: Operation ADD LOGFILE is not allowed if standby file management is automatic.
How could I do?

Hello xyz_hh ;
Your post is just a little vague so I'm guessing you are referring to "3.2.6 Start the Physical Standby Database" in "Data Guard Concepts and Administration"
If this is correct, this is part of "Step-by-Step Instructions for Creating a Physical Standby Database"
Assuming I right so far you are try to "Create an Online Redo Log on the Standby Database".
Can you confirm along with you OS, and Oracle version?
If you are trying to create redo on the standby after the fact you will need to make this change before you proceed.
STANDBY_FILE_MANAGEMENT=MANUALIf this is your issue check this link out:
http://kb.dbatoolz.com/tp/2692.avoid_ora-19527_set_dummy_log_file_name_convert.html
Best Regards
mseberg
Edited by: mseberg on Aug 12, 2011 5:35 AM

How to make wallets in CS5

They had automatic wallets in automate in CS3; where is it in CS5?

I believe if you download the installer which is a dmg file, you double click on the dmg image to mount it and then run the installer that is inside the dmg.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4963
To run photoshop cs5 in 32 bit mode:
How to run Photoshop CS5 in 32-bit and 64-bit modes
Run Photoshop CS5 on Mac OS as a 32-bit application:
Select the Adobe Photoshop CS5 application file, installed by default in the Applications/Adobe Photoshop CS5 folder.
Choose File > Get Info, and select Open in 32 Bit Mode.
Deselect this option to run Photoshop CS5 in 64-bit mode.

How to clear vendor open documents

How to clear vendor open documents, I had previously tried to clear the documents in PRD with transaction F-44 and I get the following message.
X. Ex.rate diff.accts are incomplete for account 00015080 currency CAD

You can clear using the t code F-44 which is manual or by using F.13 which is automatic.
The error you are getting is with refernce to a transaction between your Local currency and Currency "CAD"
Maintain a transalation ratio and the exchange rate. Here the system also looks for a exchange loss or gain on such conversion also. Map those accounts and you will be clearing the transaction.
If you are using automacti clearing you need to decide on the link(Common feild) between the DR open item and CR open item and these open items after having this as a refernce can be cleared automatcially in F.13.
Hope you understood.
Reward points if useful.
sarma

OB52 Posting Period Close: Does anyone know how to automate the close?

Does anyone know how to automate the FI Period Close (trans code OB52)? Currently, the business users go into the screen and open and close any periods manually. For the MM period close, we are able to do so because we found the program to use in the batch job. For some reason, the FI side shows the program SAPL0F00 but this is only a view and will not allow a batch job to be created. Does anyone know of the actual program used for the FI period close?

Use program RFPERIOD_OPEN. It may help. For further details you may check the following thread.
RFPERIOD_OPEN

How to process Customer Open Items? If that Customer is also an Vendor.

Hi All,
I need some help for the below configuations,
1. How to process Customer Open Items? If that Customer is also an Vendor to the Company. ( How to adjust these open amounts)
1. How to process Vendor Open Items? If that Vendor is also an Customer to the Company. ( How to adjust these open amounts)
Thanks
Chandra

Hi Chandra,
In addition to all the above, if the Customers and Vendors are in different company codes, then, you would have to also do the following configuration.
Execute transaction code OBYA, when prompted, type in 1st coy code, say A and then 2nd coy code, say B. This would take you to the "Maintain FI Configuration: Automatic Posting - Clearing Accounts" screen.
In the first frame, where you have
Posted in : A
Cleared Against : B
Under Receivable
Debit Posting Key : 01
Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
Under Payable
Credit Posting Key : 31
Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
In the second Frame
Posted in : B
Cleared Against : A
Under Receivable
Debit Posting Key : 01
Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
Under Payable
Credit Posting Key : 31
Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
So, if you are using the Customer/Vendor approach, company A must be set up as both a Customer(Use Txn Code XD01) and a Vendor(USe Txn Code XK01) in Company B and vice versa.
Once you have completed this set-up, you can then use transaction F.13 and/or F13E to carry out your automatic clearing.
However, if you intend to use the G/L approach, then the account numbers would be Inter-coy G/L account for each coy code as defined in the chart of accounts.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Facing very slowly response when opening operator

Hi all,
I have an issue when opening an operator module on the customer site.
I opened operator from my laptop that connect to the master / work rep on oracle11g (11.0.2.1)
and my laptop consume so much memory and CPU and then hang when click any scenario that reside on the work rep. (they have around 30,xxx scenarios on this work rep)
I don't know what's going on with this work rep. How can I track this kind of problem.
From the way that I look into this problem ,
I think the operator on my laptop try to gather some information (that's need to be shown on the operator) from the work rep into the memory (so that's why my taskmgr shows the javaw.exe consume so much CPU / Mem) and then hang.
Tried to use another machine even if it is a server machine to open operator but no luck the result was the same (consume a lot of mem / cpu and then hang).
PS. Designer / Topology are working fine with a normal response
PS2. ODI10g (10.1.3.3) + Oracle DB 11g (dedicated as repository data only)
and I decided to upgraded ODI10g to 11g and use the ODI Studio.
After a successfully upgraded
I opened up a ODI Studio and reconfig the profile to point to the upgraded repository.
Then the same problem occurs (just consume a large amount of mem / CPU and then hang)
If I just config the ODI profile to connect to only master rep. It could open only the topology (but not hang).
Thanks for any clue ,

hi Sutirtha ,
I also deleting snp_exp_txt (but this table didn't contain to much records for me)
and about the odipurgelog function
I could not exec at the OS command , am I right?
I have to connect to the designer and create a package that contain odifunction
and then execute them , Correct?
then the big problem for me is
now I could not connect to the ODI Studio. T-T
I queried the amount of records from
all_tables system table.
TABLE_NAME NUM_ROWS
SNP_SESS_TXT_LOG 5709131
SNP_SESS_TASK 2009708
SNP_SESS_TASK_LOG 1434722
SNP_SCEN_TASK 385088
SNP_SESS_STEP 254390
SNP_STEP_REPORT 244089
SNP_SCEN_REPORT 202321
SNP_STEP_LOG 139879
SNP_SESSION 119198
SNP_SCEN_STEP 47079
SNP_SCEN 21594
Im still doubt that this is just a development env
the SIT env (System Integration Test)
have a lot of data more than DEV
but the issue on the operator does not appear.
here is the amount of records on SIT ENV
TABLE_NAME NUM_ROWS
SNP_TASK_TXT 9379599
SNP_SESS_TXT_LOG 5629059
SNP_SESS_TASK 1998854
SNP_SCEN_TXT 1790998
SNP_SESS_TASK_LOG 1416291
SNP_EXP_TXT 813182
SNP_SCEN_TASK 374307
SNP_SESS_STEP 250445
SNP_STEP_REPORT 230091
SNP_SCEN_REPORT 190137
SNP_STEP_LOG 136835
any ideas are welcome
Big thanks in advance guys

How to automate the flatten transparency in illustrator?

How to automate the "Flatten Transparency option" in illustrator via javascript. Please share with me.
Thanks

I'm looking for the same thing.
app.executeMenuCommand('Flatten Transparency'); works in CC but all it does is it brings up the window and you still have to click OK to make the script continue.
Before anyone asks why do you want to do it etc. In print thereare instances where you have to open and edit (not text) large numbers of pdfs to change colours, outline fonts etc otherwise there's trouble on print devices.
My script for instance looks for 100K blacks and replaces them with rich black, looks for empty text frames, overprint, bleed settings, clipping paths etc.
The only way to edit successfully a pdf without fonts is to place it and flatten transparency outlining fonts and then work on it.
So back to the point. After the window pops up, is there a way to simulate a keystroke like "Enter" or maybe app.executeMenuCommand('Flatten Transparency'); takes arguments like:
app.executeMenuCommand('Flatten Transparency',preset_name);...?
Anyone? Adobe SDK team? :-)

How to automate "wallet open" operation in standby instance?

Similar Messages

Maybe you are looking for