How to automatically assign the message processor
Hello,
I have configured ppoma_crm organizational model and I have configured rule 13200137 responsibility assign. The system assigns support team automatically and correctly but message processor is always initial. Anybody knows that how I can assign message processor automatically from ppoma_crm organization model. Thank you for your efforts.
Hi
Thats a manual step
the team member logs in to solman and choose the ticket with new status then they goto change mode assign to themself
and change status to in process
but in case you have only one person you can do the config for message processor determination via partner determination proc etc
hope it clarifies
regards
prakhar
Similar Messages
-
Populate the Support Team based on the Message Processors Org Unit
We are using the Service Desk and using the SLFN transaction to create tickets.
At the moment we populate the Message Processor and Support Team fields manually.
Is there a way that when the Business Partner is entered into Message Processor field that the Support Team (Organizational Unit) that this person is a member of is automatically entered into the Support Team field.
When we setup the organization structure we have defined these relationships so is it possible to utilize this?
Thanks
SimonHi,
Pls check this blog..
Service Desk: Support team determination in Solution Manager 7.0
Pls assign pts. -
Email automaticly to the message prosessor
Hello
Our need is to send to the message processor (that become automatically by a bp relationship) an Email that tell him
that a support message is waiting for him just a few mints after the message created the solution manager system.
I have an Action profile ZSLFN1 with the action definition
ZEMAIL_TO_MESSAGE_PROCESSOR.
This action should process using report and should only run one time. This action definition has a *start condition* that
say: when the "Current date&time" big them the "Requested Start"
But it doesn't work. the action definition was not showmen in the CRMC_ACTION_JOB report.
Did someone have an idea Why is that?
And is there another way to deles with our needs
Best Regards
MeravMerav,
have you implemented note 1041455?
If so, just make you starting condition something that is always true, such as when the user status does not equal confirmed.
regards,
Jason -
How do I stop the message "Cannot get mail. The user name or password for iCloud is incorrect" from popping up 2-4 times consecutively every time I choose MAIL on my iPhone 4, 7.1.1 I have to select "OK" 2-4 times each time before I can read other email accounts. I used to have an "@me.com" account which I think was automatically changed to an "@icloud.com account." I opened a new iCloud.com account yesterday because I could not figure out how to get in the old ones. I want to delete the original @me & original iCloud account. When I try to delete the account, they tell me my DOB is wrong. I just want those pop ups to stop. Thanks in advance for your help.
Hi Suzanne,
It sounds like you’re running into a password issue with an older Apple ID that’s setup on your iPhone, which is preventing you from removing an iCloud account from your device. Take a look at the article linked below, it outlines all of the possible ways to change an Apple ID password.
If you forgot your Apple ID password - Apple Support
After you enter your Apple ID, there are three ways you can change your password:
Answer your security questions. Use these steps if you know the answers to your security questions.
Use email authentication. We'll send you an email that you can use to change your password.
Use two-step verification. If you set up two-step verification, you can use it to change your password. You just need your recovery key and a trusted device.
So long,
-Jason -
How to automatically create the custom migration scripts after recreating SSMA project?
How to automatically create the custom data migration scripts after recreating SSMA project?
There is number of tables ( big tables with BLOBS) which I want to set up automatically to be migrated with custom migration scripts (replacing e.g. attribute named "FILE" with "TO_BLOB('') AS FILE" ).
So the question is how to open MB file (I think that it should be standard db of some destktop RDBMS) ?Hi Roman.Pokrovskij,
According
to your description, we can use SSMA tool to migrate data from one database (including Access, Oracle and so on) to SQL Server via GUI or the scripts. There is an example about migrating Access database to SQL Server via the
custom migration scripts, you can review refer to them.
<?xml version="1.0" encoding="utf-8"?>
<ssma-script-file xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\Microsoft SQL Server Migration Assistant for Access\Schemas\A2SSConsoleScriptSchema.xsd">
<config>
<output-providers>
<output-window suppress-messages="false"
destination="stdout"/>
<upgrade-project action="yes"/>
<data-migration-connection source-use-last-used="true"
target-server="target_1"/>
<progress-reporting enable="false"
report-messages="false"
report-progress="off"/>
<object-overwrite action="skip" />
</output-providers>
</config>
<servers>
<!-- Server definition for Sql server target server-->
<sql-server name="target_1">
<sql-server-authentication>
<server value="$SQLServerName$"/>
<database value="$SQLServerDb$"/>
<user-id value="$SQLServerUsrID$"/>
<password value="$SQLServerPassword$"/>
<encrypt value="true"/>
<trust-server-certificate value="true"/>
</sql-server-authentication>
</sql-server>
</servers>
<script-commands>
<create-new-project project-folder="$project_folder$ "
project-name="$project_name$"
overwrite-if-exists="true"/>
<connect-target-database server="target_1"/>
<load-access-database database-file="$AccessDbFolder$\$AccessDatabaseFile$"/>---
<!--Schema Mapping-->
<map-schema source-schema="$AccessDatabase$" sql-server-schema="$SQLServerDb$.dbo" />
<!-- Convert schema -->
<!-- Example: Convert entire Schema (with all attributes)-->
<convert-schema object-name="$AccessDatabase$"
object-type="Databases"
conversion-report-overwrite="true"
verbose="true"
report-errors="true" />
<!-- Synchronize target -->
<!-- Example: Synchronize target entire Database with all attributes-->
<synchronize-target object-name="$SQLServerDb$.dbo"
on-error="fail-script" />
<!-- Data Migration-->
<!--Example: Data Migration of all tables in the schema (with all attributes)-->
<migrate-data object-name="$AccessDatabase$.Tables"
object-type="category"
report-errors="true"
verbose="true"/>
</script-commands>
</ssma-script-file>
There is a similar scripts about migrating Oracle database to SQL Server, you can use powershell script to automatically run the console for scripts/variable files, saved in the specified folder. For more information, review the following
article.
http://blogs.msdn.com/b/ssma/archive/2010/09/09/performing-database-migration-assessment-using-ssma-console-application.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
How to automatically print the layers of a drawing in separate sheets in one go?
How to automatically print the layers of a drawing in separate sheets in one go?
Suppose that my pdf file contains 15 layers and wanted to print each one of these layers separately in separate sheet, then how this sort of work might be done automatically?
Thank you for the help,
Best
JamalNo, unfortunately, when you're in Calculation and click "pick" it closes the previous window. But I can tell you!
In the Amount field I chose Calculate>Value is the PRODUCT of the following field, and I picked Hour1, which is the field where I entered the formula you provided HOURS1 * 10. I just checked the formula and saw that it was missing a space, and inserted it. So now there is a calculation appearing in the amount column, but it's equal to what I am entering in the Rental Fee Column, not 10x the amount. See illustration. I checked the calculation order (thank you for that) and fixed the sequence.
Also, when I go to select a number from from drop down box in the Rental Fee column, it now gives me an error message before inserting the number. The error message reads "Must be greater than or equal to 0 or less than or equal to 5." I have no idea why, when the choices in the column are limited to 0, 1, 2, and 3. Is there a way to send you the actual form through this forum - I think I can upload it to the website and send you a link, correct? Thanks for your help, George. -
public class Userdefined extends Exception {
Userdefined(String sparam){
System.out.println(sparam);
Userdefined(){
private static int acno[]={100,105};
private static double bal[]={100.00,200.00};
public static void main(String args[]) {
try{
for(int i=0;i<2;i++)
System.out.println("ACCCCNO------>"+acno[i]+"BAl------>"+bal);
if(bal[i]<150.00)
Userdefined udexp=new Userdefined("bal less");
throw udexp;
catch(Userdefined e){
System.out.println("--->"+e);
How can i display the message "less amt" using my parmeterized constructor.VinayTK wrote:
How can i display the message "less amt" using my parmeterized constructor.Erm ... what? You can't --- at least not with the stuff you've got there.
A properly formed question, with some idea of what you're trying to accomplish would be a huuuuge help.
Winston
BTW: Congratulations. At my age, 'first's in computing are rare; but it's definitely the first time I've seen an Exception class with a main() method.
Edited by: YoungWinston on Sep 1, 2009 9:46 AM -
I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?
Hello mrmacjohn,
Verifying that any iCloud account that may be signed in is signed out should resolve this error.
On your Mac, open iCloud preferences, then click Sign Out.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Cheers,
Allen -
Ever since I enabled iMessage on my Mac Airbook, I can no longer receive text messages from the iMessage people on my iPhone, only on my iMessage now!! How do I get the messages to reach both iMessage and iPhone??
We are suffering very similar issues when communicating from my iphone to a friend who has both iphone and iPad enabled.
As long as I reply to an existing text chain, then it is visible on the target iphone. If I SMS the phone number, it gets routed to the IPAD!! And NO, I should not have to disable imessage when I want to send an SMS!! -
Topic area: Apple Mail. Question: How do I get the message preview window to display to the right of my list of email messages? i.e. to preview whatever message is currently highlighted in the center window list of messages?
At present there is no preference option available to move the preview
pane to right side of the mail window.
Best. -
I have an old version, 10.5. A few days ago, my Inbox stopped showing new messages received, although they are coming in and show under Messages on Server. How can I get the messages on the server to go to my Inbox so I can access them?
Make sure Mail is selected in System Preferences > iCloud
-
How do I turn the message sounds off while I'm talking on the iphone?
Can someone please tell me how to turn off the message sound so it doesn't play while I'm talking on the iphone?
Flip the Ring/Silent switch.
-
why do I get and how do I correct the message _ This video is only available in the US - when I am in the US - I am trying to view Downton Abbey on my Ipad using the PBS ipad app.? Thanks for your help
Privacy is an Option in the Settings App, its not in Safari as that applies only to Safaris browsing. Its called Privacy in IOS 6 In previous versions the same thing can be found under Location Services.
-
How to automatically clear the compiler log
Does anyone know how to automatically clear the compiler log window immediately prior to compilation? "Upon compilation" might be a better way to say it.
I couldn't find any preference settings that would enable this functionality.
I'm using SQL Developer version 2.1.0.63.73, which I believe is the lastest version.
Edited by: user1983440 on Feb 11, 2010 1:21 PMAn automatic clearing of the compiler log is not available. This would be a good enhancement request to add to the Exchange: http://htmldb.oracle.com/pls/otn/f?p=42626:16:3459578745962796
Ashley -
How come I get the message (Not Charging) when I am plugged up to power?
How come I get the message (Not Charging) when I am plugged up to power? I keep getting this message, is there a problem? Or is this normal
It had got done to 30% when I plugged it up, it goes in and out - charging and not charging. it is sitting still, but I am creating Movies with iMovie and iDVD
Maybe you are looking for
-
Screen not auto dimming.....can anyone help?
For some reason, my touch has stopped dimming. Whether I am playing a song, on the main screen, whatever, it just stays at the auto brightness setting, never going to the darker screen and never going all black. I have done a reset and this didn't fi
-
I have added a JDBC theme to my map with the following query: var baseQuery="select /*+ index(a, LIST_CENTRELINE_I) */ innera.name1, innera.name2, geom " + "FROM (SELECT a.PRI_NAME as name1, b.PRI_NAME as name2, sdo_geom.sdo_intersection( a.shape, b.
-
BI IP input ready query not working
Hello, I have created an input ready query on a aggregation level and am trying to create a planing application using analyzer. However the query is not opening in inout ready mode at all. I have checked the setting in Querry design and it is ready f
-
Database logic problems.. very urgent
HI im having problems doing something that is quite possibly very easy.. i have written a few queries using JDBC anyway the problem is hwo can i see if no records have been returned? using the ResultSet... i have tried if Resultset == null but it doe
-
followed by this: Do I need to reinstall DW or is there a way to fix it? Any help much appreciated!