How to automatically change spellchecker language with the change of the input language?

Ubuntu 14.04, Firefox 30.0

Try this addon and check if it works:[https://addons.mozilla.org/pt-PT/firefox/addon/dictionary-switcher/ Dictionary switcher]

Similar Messages

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

How to export 2 different report with a link at the same time

Hi,
Do anybody know how to export 2 different report with a link at the same time. I currently create a report which link to another report. But when I want to export the 1st report I also want the 2nd report also be exported.
Thank you very much.
Best Rgds,
SL Voon

Export all the three components individually.
It will generate 3 script files. Now run them from SQL>
null

Change Rule 3 (with Engineering change order with change type)

A customer created a recipe with Change Rule 3. Can you still change a recipe that has this setting? What needs to be done if a change has to be done on the recipe? Thanks!

Hi Kevin,
the change rule You described requires an engineering change order (ECO) with a change type for objects. Without ECR You can not change that recipe anymore.
1) You need to crate an engineering change request (ECR) with transaction CC31
2) In this ECR You need to create an entry in the "objects" section for "TL" with Your task list type, receipe group and with a change type
3) In header of ECR You need to change the status to "check ECR"
4) Go back to objects section, mark You object and choose function "Edit -> Object Status -> Change Possible"
5) Go back to header and change the status subsequently to "ECR checked", "approve ECR" and "convert ECR"
6) Save
7) Go to C202 or C223 and use this ECR number to change Your master data
Alternative B)
If Your customer enterd this recipe with change rule by accident and does not intend to user ECM functionallity just delete the recipe using TC C298.
Best Regards
Wolfgang

How to create a new track with existing changes in the production

Hi
I need to create a new track for the ESS package with the existing changes that we already made to the ESS package. We already have a development track and the customisation to the ESS package has been already done in that track. Now my requirement is to create a new track ( DEV, CONS, TEST and PROD) with DEV having all the existing changes we made. In short how do I import the SCA's from development track PROD to the new track DEV. We are on NW2004 SPS20.
points rewarded for helpful answers
Thanks
Sheril

Param
Have you done the import in DEV and CONS and then Assembled .. ?
If yes then go to /usr/sap/jtrans/CMS/archives/.......... -> check for the track name and then the last .SCA file in it . Copy that SCA file in the /usr/sap/jtrans/CMS/inbox and go to the new track and configure the checkin to inbox ... You should see the SCA in there ... check those in and you are ready to have those SCA in your Production track ..
If no then you need to know the NWDS functions .. I shall send you the details to bring the incomplete changes (not assembled) to new track .. let me know if the first one worked ..
Thanks
Rahul

How to automatically build a table with 2 alternated font colors for the lines ?

Hi,
I'm looking for a way to automatically build a table with alternate background color and alternate font color for the lines.
I have this particular project (a list of companies of an industrial area) and it is updated twice a year :
I managed to set an automated alternate background color of the lines so this works well (white/blue/white/blue...)
But the font color does not automatically alternates... and I do not know how to set this up...
All the companies are ordered alphabetically so when I have to insert or delete one, the whole text of the table under the modified line is messed up. Then I have unreadable white text on white background and blue text on blue background...
Does anyone have an idea on how to automatically alternate the font color ?
Thank you.
Best regards,
G.

Hi,
I know this [JS] code is awful but it works. If someone wants to correct it …!
At the beginning, you have an Excel file. You play a little with it [doing concatenations] to get, after importing it in ID:
Then, just run the .jsx:
Done!

How can I create multiple pages, with different layouts to the others, in DW fluid grid layouts?

Hi everyone, : )
I am creating a website using FGL in DW CS6, v12.0 build 5808. I do not have Creative Cloud (do you have to pay to use this service?).
I have created one layout for my home page.
I would like to create several more pages, but I want them to use different layouts (as well as different content).
I tried to do something similar before using 'save as' (this was with a non-FGL), but whenever I changed the original page that I had 'save as'd' from, the layout in all the other pages would change too!
I found a possibility from someone else online suggesting using a template, but have not tried it yet: http://www.linkedin.com/groups/Adding-second-fluid-page-in-119937.S.192422240
I'm a bit scared of breaking everything, as I am new to web design and have had to restart the whole process a few times due to messing up the fluid.css etc and other issues, so I am taking baby steps.
Happy to try whatever's suggested and, while I wait for (I hope) your responses, I think I will try the template thing, but from the reply the person who asked the question gave, it sounds like his subsequent pages changed too, as I mentioned above? *scared* ; )
If anyone can help me with this query I would be very grateful. Thank you! : )

Thanks David.
I tried using different IDs for the other pages, but eventually one of the divs seems to 'break' - it overlaps other divs, or cannot be moved or resized (you can select the outline and it goes blue, but no 'move up a row' or down a row or 'lock to grid' etc icons appear and it can't be drag-re-sized), plus the green overlay disappears (just from that div. I'm aware of how to turn visual aids on and off), so it seems broken. This often seems to happen if you rename a div once it's been created; it does not rename in the layout.css on the right side panel (CSS Styles) in DW and the 'broken' behaviour above is exhibited. Do you know anything about this? Is this the 'edit this doc at your peril' stuff that most tutorials seem to mention? Am I doing something wrong?
I also tried making an FGL and saving out the original boilerplate.css, layout.css and respond.js. Then created multiple new FGLs and each time it created new versions of layout.css (called 'untitled-1', 2 etc.). Once I had created all the FGLs, I deleted all the new boilerplates and untitled.css files. Then restored the original ones and changed the link at the top of each page's html to refer to the same filename (the original layout.css), rather than untitled.css. I thought this might work and it seemed to for a while, but then as I had to add new div names for the sections on each page, it eventually broke (as above).
Anyway, I think you have a good point about different layouts and it occurred to me also while I was exploring and waiting for replies here. I think I will make one layout for all pages and go with that. I have a couple of questions about that though:
1. I think the max number of divs I want for one of the pages is 10, but some pages need less divs. If I only fill e.g. 8 divs on one page, will the other ones be sat there empty? I think they will actually...I guess I'm asking because I have not tried it yet (will do after this) and it takes so long to do this trial and error.
2. If the amount of content in each div is different, e.g. let's say Page 1 has 6 lines of content in div1, but page 2 may have an unlimited amount of content (I will want to add to it in the future). Will this result in the div on page 1 being a huge block of empty space after its 6 lines?
Thanks so much for your help!

How to associate a test message with a change document

I am using solution manager 7.01.
accessing my change documents through the workcenter I need to create a new test message - so I use the Create transaction button on the button bar, Service Process, Test Message
Then I am in the create test message screen. However from here I cannot see how to associate my test message with either the change document that I was processing or to the maintenance cycle.
Ideally I want to link the test message to the change document however at least to the maintenance cycle.
How do I do this?
Am I creating the test message in an incorrect way?
regards
Marina

Anyone? Does no one use Test Messages?

How to export a flash project with a changing frame rate to a video

I have a Flash project that is a series of roughly 1000 images. The result of the images is a simple animation, and there is music imported on a separate layer.
There are moments in the music that I wanted to line up with certain frame changes, and there are sections of the music that I wanted to match up with a faster (double-time) frame rate.
I used this code in several places in the a code layer:
stage.frameRate = x;
The result is exactly what I want in SWF -- the animation speeds up and slows down at the exact right moments to match up with the music track, but it seems like it's just not possible to export this variable frame rate project to a video file?
According to the accepted answer on this post: http://forums.adobe.com/message/4019538, it seems that:
The export function in Flash Pro doesn't transcribe *frames*, rather it plays the Flash animation and records it like a camcorder
If that's true, then I would think there is a way to record a variable frame rate project into a video -- does anybody know if this is possible?

That or Premiere would both get the job done. After Effects might be more desirable as it has a feature called Time Remapping (right-click on the video layer, Time->Enable Time Remapping). You can add keyframes to any point in a video and then drag them around to speed up or slow down the video. That'll allow for very precise tweaks.
Finally all I'd suggest is when you jump into your next project, make a quick dummy test project to see if the software you're using is easily capable of producing what you want. It'll solve the headache of completing the project only to land where you are now. Now you know Flash won't play nicely with scripts and Export Movie. If your desired end result was always a video I'd probably use video editing software to make the video. There's some free stuff out there if you really look, but no, it won't be as nice as After Effects or Premiere by any stretch. Although when you see how amazing After Effects is, you'll probably want to buy it .

HT5312 How can you fix a email with a .con at the end

Well, everytime i try to reset my security questions, the password is sent to a email with a .con at the end. Does anyone know how to change the email, because it won't let me.

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94610)

How to create a table report with alphabetic link at the top

Hello,
I have a db table of users, and have created a report based on this table, however I want to have each aphabet letter at the top of the report so that users can click on the letter and see all records where the username field starts with that letter.
How can I achieve this?
Thanks,

Hello user11243298 (please tell us your name),
Your report query would look something like this (assuming page number is 1):
select some_column1, some_column2
from your_user_table
where username like :P1_INITIAL || '%'
For the letters at the top of the report, here's a couple options:
- If you want all letters to appear whether or not there are any rows, you can create a series of buttons or links, one for each letter, and specify the target URL to submit back to the report page, setting the item P1_INITIAL to each letter.
- If you want only letters that have rows, one way is to create a dynamic LOV based on a query like this:
select distinct upper(substr(username, 1, 1)) d, distinct upper(substr(username, 1, 1)) v
from your_user_table
order by upper(substr(username, 1, 1))
Then use that for a select list with submit, again targeting the report page and setting P1_INITIAL to the selected value.
Hope this helps (if it does, please reward it),
John

How can I make a tent with two halves of the info ( and pictures one direction and the other half the opposite direction ( towards each other of course)

How can I make a table tent in PAGES with both halves of the info and pictures turned towards each other? I can figure out how to turn just the picture upside down AND the text sideways, but not upside down with the picture included so that it is at the top and not the bottom!

Layout the picture and text (in text boxes) the way you want them in the lower half of the page. Then Select All and Group them. With the Group selected, type Cmnd+D to duplicate it and then hold down the Shift and Command keys and grab a corner box (you’ll see a double headed arrow) and rotate the box until it’s upside down. (Holding down the Shift key will constrain the rotation to 45 and 90 degree positions.) Now drag the box into position in the top half of the page.
Walt

How do I move a clip with transitions attached on the primary storyline?

One more frustrating problem with the mysterious magnetic timeline: on the priumary storyline I created a text clip with a gap clip on each side, then added cross dissolve at the beginning and end of the clip so that it fades in and out to black:
Now I want to reposition this text in the timeline, mantaining the fade in/out at the head and tails. In FCP7 this was simple as a gap in the timeline simply showed black and the clip could be moved as one piece. In FCPX when I try to move the text clip with the P position tool, the transitions disappear after repositioning. Extremely frustrating:
If I select the clip and the fades together, plus the gap clip at the end, and move them together with the Position tool then the fade out is retained, but the fade in still disappears. I've also tried rolling from the fade in from the gap clip before it, but instead of rolling the clip ahead this shortens the fade (I think the behavior of trimming and rolling transitions is totally wacky). The trim tool is also useless in this situation as you can only select one edit point at a time with it.
The only solution I found is to cut the gap clip before the transition, then move the text clip and transitions with the P tool. This will create two abuting gap clips before the text clip, but allow the transitions to remain intact. Not hard, but annoying to have to do
Often I have to adjust the position of a text clip in the timeline like this after adding the transitions to get the timing right. Is there any way to move the clip while retaining the transitions at the beginning and end? It would be so much easier to be able to roll the edges of the gap clips so that I didn't have to make extra edits and workarounds.
The problem seems to be that the gap clip acts as like a regular black slug video clip in some cases, but not in other case. When you move a clip in the primary storyline a gap clip is automatically created to fill a gap -- okay, fine. But you can roll the edges of a video clip with the P tool, but not a gap clip. ***?
I'm using the latest update, 10.0.8. I will be submitting this to Apple as well....

I am trying to move the text clip forward with the transitions still attached. The difference is that in FCP7 you can leave a gap before a dissolve and it will fade in from black. If you move the text clip, the dissolve moves with it, still attached.
In FCPX however, the gap has to be a gap clip. So the dissolve is attached to both the gap clip and to the text clip. Once you put the dissolve on the edit point, there is no way to move the text clip forward or back on the timeline without deleting the dissolve. Or, if you move the clip forward or back with the Position tool (necessary to create a gap) then the transitions just disappear.
Basically, I am looking to roll the transition with the clip.
I could use the opacity handle on the text clip (using "show video animation") in stead of a dissolve, but then I have no control over the shape of the dissolve curve and I'd have to add extra handles to the text clip to center the dissolve where I want it.
Regarding "I very seldom use the position tool. Rolling the gap clips can be done with the regular arrow tool - *that* is one example of the magnetic timeline working for you."
This is true, but clips behave differently when you you roll with the P tool vs the A tool. With the A tool, other clips are magnetically rippled forward or back on the timeline to maintain their relative relationship and avoid all gaps. With the P tool, video clips maintain their position on the timeline, creating or trimming gap clips when a gap is created or filled. The problem arises when a transition is attached to the clip you are moving or trimming.
I understand in priniciple why it behaves the way it does, but it's inconvenient in this case, and inconsistent with the normal behavior of gap clips when a transition isn't involved.
In my mind the transition should be anchored to the video clip, not to both the video and gap clip when there is a transition between the two.

How to save as AI file with PDF compatability at the same location?

Hi Guys,
Requesting for script. Here are the details..
I do have lot of AI files (from different paths) which are do not have PDF compatability switch on. So now I am looking for script that all the files should save as at the same place (over write) and should switch on the PDF compatability switch on.
I tried with Action script, But the problem is, action scripting is recording the path where I saved first time. That means, all the files are save as into recorded path. This makes me some what confusion, because source file will be 1 and save file with PDF 1. So in total 2 files will create which is not good.
So I am requesting you that script schould overwirte at the same path and should switch on the PDF compatability.
FYI: Using Adobe CS4...
If you help for this, it is really greatful for me.
Thanks in advance...
Regards
HARI

#target illustrator
var df = new Folder('~/Desktop');
var topLevel = Folder.selectDialog('Please choose your Top Level Folder…', df);
if (topLevel != null) {
     topLevel = topLevel.fsName
     var fileList = new Array();
     fileListRecursive(topLevel, /\.ai$/i);
     if (fileList.length > 0) {
          main();
     } else {
          alert('This Folder or sub folders contained NO Illustrator AI files?');
function main() {
     with (app) {
          while (documents.length) {
                 activeDocument.close(SaveOptions.PROMPTTOSAVECHANGES);
          //var orginalUIL = userInteractionLevel;
          //userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
          for (var a = 0; a < fileList.length; a++) {
               var docRef = open(fileList[a]);
               with (docRef) {
                    var aiOptions = new IllustratorSaveOptions();
                    aiOptions.compatibility = Compatibility.ILLUSTRATOR12; // Change to 14 for CS4
                    aiOptions.compressed = true;
                    aiOptions.embedICCProfile = true;
                    aiOptions.embedLinkedFiles = false;
                    aiOptions.flattenOutput = OutputFlattening.PRESERVEAPPEARANCE;
                    aiOptions.fontSubsetThreshold = 0;
                    aiOptions.overprint = PDFOverprint.PRESERVEPDFOVERPRINT;
                    aiOptions.pdfCompatible = true;
                    aiFilePath = new File(fullName);
                    saveAs(aiFilePath, aiOptions);
                    close(SaveOptions.DONOTSAVECHANGES);
          //userInteractionLevel = orginalUIL;
function fileListRecursive(f, exp) {
     var t = Folder(f).getFiles();
     for (var i = 0; i < t.length; i++) {
          if (t[i] instanceof File && RegExp(exp).test(t[i].fsName)) fileList.push(t[i]);
          if (t[i] instanceof Folder) fileListRecursive(t[i].fsName, exp);
}

Changed Pressure transducers with 0-5Vdc from the old 0-10. PVis way off!

Im a newby with labiew as of last week. I was tasked to change the range of new pressure transducers that were recently installed in our lab application. I am currently running 6.1 with Fp-PS-4 , FP-1601 , FP-AI-112 , and FP-RTD-124 Hardware. We are changing over from Omegadyne model PX02C1-015AV to swagelok's S-model, output 0-5, Supply V dc= 10-30 V. The pinout on the connector has already been changed and tested. I also changed the range on the points of change to 0-5 and the pv is reading way off. Im sure there is a scale in a block diagram chart somewhere, but I cannot locate it. Can anyone point to any areas where I may make these changes to correct this problem?

Hi Dano,
You might check the Channel Configuration settings in Measurement and Automation Explorer (MAX). Under Remote Systems, expand the I/O modules underneath your 1601. Once you click on the I/O module that you are reading your transducer on, you'll see in the window to the right a Channel Configuration tab. Here, you can check the Data Configuration setting for the input Range. Make sure this is set to the expected signal range from your sensor.
Cheers,
Emilie K. | Applications Engineer | National Instruments
Attachments:
max fp channel config.jpg ‏38 KB

[SOLVED] How to automatically mount USB drives with custom mount point

edit:
Original title was : 'Unable to mount USB disk via /etc/rc.local', but got changed since the /etc/rc.local problem isn't relevant for me anymore.
Hello,
Since I am new to this forum, I'll start off with this :
Thanks to archlinux, its founder and all its contributors, cause this is the operating system (flavour) that annoys me the least.
The root problem :
I want to automount USB storage devices to other places than /media/ and without the need for programs that depend on gnome and the like. As I tried some stuff with hald and such, I didn't really get to a nice and easy to configure solution. Any hints in that direction are always welcome.
For now, automount of known USB storages devices during boot, will do.
So the things I tried and didnt work :
1.
Provide the disk info to /etc/fstab (via the disks UUID and 'auto' filesystem)
Add 'mount /mountpoint' to /etc/rc.local
Result : the mount command in rc.local says '... specify filesystem'
However, after boot, running /etc/rc.local mounts the USB disks correctly.
2.
Provide the disk info to /etc/fstab (via the disks UUID and the correct filesystem)
Add 'mount /mountpoint' to /etc/rc.local
Result : pc doesn't get through boot process and gives me the 'ctrl-d to reboot or root passwd for maintenance'
3.
Provide no disk info in /etc/fstab
Add the full mount line to /etc/rc.local (mount -t fs /dev/disks/by-uuid/MyUUID /MyMountpoint )
Result : don't remember the output of the mount execution, but well, it didn't mount
However, after boot, running /etc/rc.local mounts the USB disks correctly.
Is there something that isn't loaded at the time of rc.local execution that I need for mounting of USB devices ? Or why else is this failing ?
Regards,
BasiK
Last edited by BasiK (2009-08-28 07:22:50)

Thanks for the hint hunterthomson, but the pc I will be using it on, is an own-built HTPC/home file server, so there is no way I want to use a graphical file manager to get the usb disks mounted.
I tried to figure out a little about udev rules, and I got to do what I wanted to do, so thx for pointing me in that direction Mr.Elendig.
Btw, I am indeed also using auto-sleep/park disks, but this udev way works perfectly.
I added two rules files to /etc/udev/rules.d/ :
The first for a known usb disk (with its volume uuid), with a named mountpoint under my media dir /symbiosis/ :
[basik@plox ~]$ cat /etc/udev/rules.d/80-usb-utopia.rules
ACTION=="add", KERNEL=="sd[b-z][0-9]", ENV{ID_FS_UUID}=="a59332c2-07ba-4c52-afb5-20e361bdf71a",SYMLINK+="usb-%n", GROUP="storage", NAME="%k"
ACTION=="add", KERNEL=="sd[b-z][0-9]", ENV{ID_FS_UUID}=="a59332c2-07ba-4c52-afb5-20e361bdf71a",RUN+="/bin/mkdir -p /symbiosis/utopia"
ACTION=="add", KERNEL=="sd[b-z][0-9]", ENV{ID_FS_UUID}=="a59332c2-07ba-4c52-afb5-20e361bdf71a", RUN+="/bin/mount -t auto -o rw,noauto,sync,dirsync,noexec,nodev,noatime /dev/%k /symbiosis/utopia", OPTIONS="last_rule"
ACTION=="remove", KERNEL=="sd[b-z][0-9]", ENV{ID_FS_UUID}=="a59332c2-07ba-4c52-afb5-20e361bdf71a", RUN+="/bin/umount -l /symbiosis/utopia", OPTIONS="last_rule"
The second for unknown usb disks, to mount under the same dir. This is simply taken from the archwiki http://wiki.archlinux.org/index.php/Ude … .26_Tricks
Make sure these rules are executed after the ones for specific usb disks.
[basik@plox ~]$ cat /etc/udev/rules.d/usb-disks.rules
KERNEL=="sd[a-z]", NAME="%k", SYMLINK+="usb%m", GROUP="storage", OPTIONS="last_rule"
ACTION=="add", KERNEL=="sd[a-z][0-9]", SYMLINK+="usb%n", GROUP="storage", NAME="%k"
ACTION=="add", KERNEL=="sd[a-z][0-9]", RUN+="/bin/mkdir -p /symbiosis/usb%n"
ACTION=="add", KERNEL=="sd[a-z][0-9]", RUN+="/bin/mount -t auto -o rw,noauto,sync,dirsync,noexec,nodev,noatime /dev/%k /symbiosis/usb%n", OPTIONS="last_rule"
ACTION=="remove", KERNEL=="sd[a-z][0-9]", RUN+="/bin/umount -l /symbiosis/usb%n"
ACTION=="remove", KERNEL=="sd[a-z][0-9]", RUN+="/bin/rmdir /symbiosis/usb%n", OPTIONS="last_rule"
These may not be the nicest looking udev rules, but it works for what I wanted to do with it.

How to automatically change spellchecker language with the change of the input language?

Similar Messages

Maybe you are looking for