How to automatically start chapter on verso?

Hi all,
I'm finding it puzzling to figure this one out...
I have a book document, and the first chapter ends on recto.
The next chapter begins, automatically, on recto as well... I need to to start on verso.
Odd thing is, one chapter in the book is behaving... but I can't figure out why.
What setting controls this?
thanks,
Andrew

When you say book dodument most of us see document and presume you are creating a book in one file, a common technique.
Have you synchronized the numbering?
When you go to Book Page Numbering Options from the Book panel flyout menu does the dialog look like this?
When you check the Numbering and Section Options from the Pages panel flyout menu withe first page of your second (and subsequent) chapter(s) does the dialog look like this (your page numbers and chapter number will be different, but it must be set to automatic)?
A failure of your pages to flow properly indicates a problem in one of these areas.

Similar Messages

  • How to automatically start a workflow?

    All,
    I need to start a workflow item automatically based upon a table insert. I was hoping to use a trigger, but I could do it from within the application too.
    I have a simple workflow itemtype defined in workflow builder. It has several attributes.
    I found the pl/sql procedure of LaunchProcess which does
    CreateProcess and StartProcess, so I guess I am to use this?
    How/where do I populate the attribute values?
    Thanks,
    Tim

    Hi Tim,
    You set the attribute values by using the procedures
    wf_engine.SetItemAttrText
    wf_engine.SetItemAttrNumber
    wf_engine.SetItemAttrDate
    depending on the datatype of your attribute.
    You may also wish to use the procedure
    wf_engine.SetItemOwner
    to indicate the role that owns the item you are launching.
    Thanks,
    Gavin

  • How to automatically start postfix on boot?

    I often need postfix to send e-mail. To use postfix I need to start postfix everytime manually via the Terminal commandline.
    I would like to have postfix to be started automatically with booting.
    Is this possible in Mac OS X Snow Leopard? How can it be done?

    There is already an org.postfix.master.plist file in /System/Library/LaunchDaemons
    I had an old copy of Postfix Enabler from http://cutedgesystems.com/ but didn't appreciate having to buy a new program when Leopard came out, so I rolled my own. Here is my edited org.postfix.master.plist:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>org.postfix.master</string>
    <key>OnDemand</key>
    <false/>
    <key>Program</key>
    <string>/usr/libexec/postfix/master</string>
    <key>ProgramArguments</key>
    <array>
    <string>master</string>
    </array>
    <key>QueueDirectories</key>
    <array>
    <string>/var/spool/postfix/maildrop</string>
    </array>
    </dict>
    </plist>
    This will enable you to send mail. You can setup your Mac to receive mail too, but that is a bit more involved.

  • How to automatic start Microsoft VDI Clients on Windows Embedded Standard 7

    Greetings,
    I'm deploy Microsoft VDI for my customer, I use HP Thin Clients with Windows Embedded Standard 7.
    when we start the thin clients, we first open the thin client desktop, then open the RDP connetions, and input the ip address to access the virtual desktop.
    I think it's very complex for the end users.
    I want when we start the thin clients, it automatic connect to the VDI server, we just need to input the username and password to access the users' virtual desktops.
    does anybody know how to set it, or if there are some clients tools ?
    Thanks.
    Frank@Hiweb 冯立超@瀚博资讯

    Hi,
    If you work with mstsc.exe (Microsoft Remote Connection client for Windows), you can simply pre-configure a customized connection and save it as a .RDP file. Then, users can open the connection
    via double clicking the .RDP file.
    In addition, you can create a startup script to run the .RDP file.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • How can I disable iPhoto from automatically starting when I connect my iPhone?

    Whenever I connect my iPhone to my Mac it automatically starts iPhoto?  How can I make this not happen?

    Go into iPhoto's General preference pane and set the Connecting camera opens to No Application:
    OT

  • How can i disable imessage from automatically starting up when i turn on macbook air?

    how can i disable imessage from automatically starting up when i turn on macbook air? i dont know my imessages to pop up on my laptop when it turns on. But i dont want to disable imessage totally on my macbook.

    Welcome to the Apple Support Communities
    First of all, check that Messages is closed when you turn off your MacBook. This is so important because, by default, OS X will reopen all opened apps the next time you start your Mac.
    Apart from that, when you go to  > Shut Down, or  > Restart, in the window you see to restart or turn off your MacBook, unmark "Reopen windows when logging back in". This will avoid that your Mac opens all opened apps the next time you start the MacBook, so Messages won't start automatically at startup

  • In Lion, running on an i MAC (late 2006), how can I stop certain programs from automatically starting up when I start my MAC?

    In Lion, running on an I MAC, (late 2006), how can I stop certain programs (iTunes, Word) from automatically starting up when I start the computer?

    Any application that is open when you shut down will re-open when you restart unless you deselect this when shutting down/restarting:
    Also check System Preferences>Users & Groups>Login items tab and make sure there's nothing listed there that you don't want launched.

  • How can I keep this from automatically starting up??

    I just installed this and it starts up automatically and i would rather it not, because it also does not shut down when i am trying to close my computer.  how do i do this????  thankis

    Finally sorted the same problem on both my pcs. If you are a member of Facebook, then the problem likely is because of that.What I did to spot Spotify automatically starting up. 1. Log into Facebook, and then into Account.2. Go to Account Settings (on Facebook).3. From there go to Apps (on left side of screen).4. Find Spotify in the list of Apps that shows up and press the "x" button to the right of "Edit".5. Log out of Facebook.6. Log out of your PC.7. Restart the PC.8. Spotify will still appear asking you to log in with Facebook or Spotify password.9. Log in to Spotify with your Facebook password.10. On Spotify - go to Edit (top left of Spotify screen).11. Scroll down to Preferences.12. Scroll ALL the way down to the bottom, and IF it says Log on Automatically, click the "Don't Open Automatically".13. Log out of Spotify.14. Log out of your PC.15. When you switch your pc on again - the problem hopefully, as in my case, was resolved. I have had this problem with other things starting automatically in the past, and it has always been because it is an "App" appearing in my Facebook list. Do the things listed above in that order and hopefully it will work. Hope this helps. Good luck.Steve. 

  • How do I set Firefox 4 to automatically start in 16-bit mode?

    Certain web sites I use daily require Firefox 4 to be started in 16-bit mode. How do I set Firefox 4 to automatically start in 16-bit mode?

    Do you mean 32 bit mode as opposed to the default 64 bit mode?
    # Close Firefox
    # Open the Applications folder in Finder
    # Right click or control-click the Firefox.app icon
    # Select "Get Info"
    # Select or Deselect "Open in 32-bit mode"
    # Close the "Firefox Info" window
    # Restart Firefox

  • How do I format a document in Pages 5.2 so that each sentence automatically starts with capital letter?

    How do I format a document in Pages 5.2 so that each sentence automatically starts with capital letter?

    If you installed the Devon Technologies (Freeware) WordService Service package, there is an item that will enable you to fix selected content to show initial capitals in sentences. You may need to enable this feature in the System Preferences > Keyboard > Shortcuts > Services selections. This only works in Pages v5.2 (and maybe later releases).

  • HT1660 My itunes library has automatically started to list my songs alphabetically.  I do not want this.  How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.

    My itunes library has automatically started to list my songs alphabetically.  I do not want this.  How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.

    For the missing Artists on your iPod, make sure their tracks in iTunes are not marked as "Part of a compilation" in iTunes. You can do this by highlighting the track, right->clicking on them and choosing "Get Info" from the shortcut menu. When the window pops up, head over to the Info tab and make sure there is NO tick mark next to this option in the lower right hand corner. Lastly, sync the updated changes to your iPod.
    B-rock

  • How to automate the Oracle database start and shutdown process

    How we can automate and oracle database start and stop procees with Linux start/shutdown process.
    I want to automatically start the oracle database at the time linux server and shutdown the database on shutdown linux server.

    Hi,
    I can share my scripts:
    1) /home/oracle/start_oracle.sh
    #Script should be ran as Oracle user
    cd /tmp
    export ORACLE_SID=orcl
    export ORACLE_HOME=/oracle/ora9i
    lsnrctl start
    sqlplus -S /nolog <<ENDSQL
    connect / as sysdba
    startup
    exit
    ENDSQL
    emctl start dbconsole
    isqlplusctl start
    NOTE: emctl and isqlplus are optional
    2) /home/oracle/stop_oracle.sh
    #Script should be ran as Oracle user
    cd /tmp
    export ORACLE_SID=orcl
    export ORACLE_HOME=/oracle/ora9i
    isqlplusctl stop
    emctl stop dbconsole
    sqlplus -S /nolog <<ENDSQL
    connect / as sysdba
    shutdown immediate
    exit
    ENDSQL
    lsnrctl stop
    NOTE: emctl and isqlplus are optional
    Then what you need:
    1) K91oracle_stop (put it in the desired run level)
    #!/bin/bash
    # description: Stop Oracle before reboots
    su - oracle -c "/home/oracle/stop_oracle.sh" >> /home/oracle/stoporacle.log
    2) S91oracle_start (put it in the desired run level)
    #!/bin/bash
    # description: Start Oracle after reboots
    su - oracle -c "/home/oracle/start_oracle.sh" >> /home/oracle/startoracle.log
    Bye.

  • How to stop automatic start music on ipad mini

    While watching TV app (as  an Idevice) on Ipad mini the music automatically start playing. Very annoying. How do I get this to stop

    Hi samimhameedi,
    If you are having issues with your iPhone's music starting to play when the Video application is running, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    iOS: Force an app to close
    Next, I would try restarting the iPhone -
    Turn your iOS device off and on (restart) and reset
    If the issue is still present, you may want to restore the iPhone as a new device -
    iOS: How to back up your data and set up your device as a new device
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

  • How to disable automatic start of SAP NetWeaver ABAP trial in Windows XP

    Hello experts,
    please, how is it possible to disable automatic start of SAP NetWeaver ABAP in Windows XP after windows startup?
    Thank you,
    Ondrej

    Right-click on "My Computer", and choose Manage.  Open the "Services and Applications" node on the tree structure on the left, double-click on "Services".  Find the service called  MAXDB:NSP  Right-click on this and change the startup type to "Manual".  Click "Apply", then "Ok".  Then go to the service labeled as SAPNSP_00 and do the same thing, setting it to manual.  That should be it.  These services will then be starting only when starting the system via the MMC
    Regards,
    Rich Heilman

  • I am trying to download video that i purchased from itunes, but everytime i want to resume the process after pausing it, it automatically start the whole downloading process again, how can i eliminate this problem?

    i am trying to download video that i purchased from itunes, but everytime i want to resume the process after pausing it, it automatically start the whole downloading process again, how can i eliminate this problem?

    They don't normally appear in the download screen ... until I attempt to download another movie. Then they just start appearing. If you click edit - a normal movie download has a circle that appears on the left hand side that allows you to select and delete ... these movies don't have that option so you need to find the movie in you list (under movies) and select the download cloud symbol again to stop it downloading ...you may need to do this a number of times before it stops for a while ... or until you try to download a movie then it starts all over again.
    i have logged out of my itunes account. restarted the iPad, removed all movies, restarted the iPad, logged back into my iTunes account and restarted my iPad .... but as soon as I tried to download a single movies ... the other movies started appearing in the downloads again.

Maybe you are looking for

  • JMS Topic - Can there be multiple pubs/subs

              I belive JMS Topic supports multiple publishers, subscribers           for the same topic right? I am sure about the multiple subsicriber part because           I have done it before (with one publisher). However, I am changing my          

  • Inserting pictures in Crystal Reports10

    In Crystal Reports 10, I have a number of boolean value fields (from .NET dataset). For each field I have two pictures (OLE objects), one ticked checkbox and one empty checkbox. Depending on the boolean value of the field, I suppress the appropriate

  • Looong render times with motion templates

    I've been a big advocate for FCPX as there are a lot of great features but there are some things that are just killing me, no.1 render time. I'm working on some simple presentation edits using motion templates I have built in motion 5 and published t

  • Background image in a JTextArea

    How could I place a background image on a JTextArea?

  • ASSERTION_FAILED , RSAR_TRANSTRUCTURE_ACTIVATE

    Experts,     I have an issue, when i try to activate a transfer structure ( DB connect Datasource ) I get  a dump with the following message ASSERTION_FAILED RSAR_TRANSTRUCTURE_ACTIVATE "The following checkpoint group was used: "No checkpoint group s