How to automize Self-control [Internet blocker] / bypassing password request?
Hey there,
I hope someone on here may be able to help with this. I figured it might be good to ask about this on a popular board geared towards general non-technical user like myself.
I use the app SelfControl [http://selfcontrolapp.com] to help me manage my internet addiction. The app's great. It really helps--when it's running.
I've been trying to set it up so it automatically starts at certain times of the day [i.e. every day 10pm-7am], Using the guide found here [ http://hints.macworld.com/article.php?story=20100801214648362,] I've been able to integrate SelfControl into my iCal, to set it up as a recurring iCal event.
But SelfControl requires my admin password to actually initiate the the internet block. So right now, I have to manually enter the password every time iI want to run SelfControl--even when it's automatically launched as an event from iCal. This kind of makes the app useless as I can just not enter the password and continue surfing endlessly.
Basically, I need some help figuring how to bypass the password request/have it inputted automatically. I did try following the instructions found in the above link about using keychain access, etc but none of it seemed to work--SelfControl still prompts me for my password.
I am hoping someone here can help me out; the instructions in the above page are a little too technical for me to fully comprehend (and the forum linked above is now permanently closed)
I'm the only user of my laptop, if that makes a difference. I am running OS 10.10.1 Yosemite.
Any help would be appreciated
Thanks,
Kursty
so many views and so few answers... Okay, most of those were me refreshing the page, but still..... HELP
Similar Messages
-
How do I remove the apple ID and password prompt that appears frequently. It is prepopulated with an account for my daughter and not one I need on the IPAD...
Go to Settings>Store>Apple ID. Tap on her ID and sign out. Them sign in with your own ID.
If there are apps on your iPad (and I assume that there must be) that your daughter purchased with her ID - they can only be updated by using her ID. -
How does the ZCM11 control or block 3.5G Card ?
Hi All
in my country, much people use 3.5G for mobile access. but the 3.5G will cause many security issue. Does the ZCM11 could complete block 3.5G card work ? besides 3.5G...like Wimax or LTE...Do these devices also block or maybe in the future ?
wyldkaoOriginally Posted by wyldkao
Hi All
in my country, much people use 3.5G for mobile access. but the 3.5G will cause many security issue. Does the ZCM11 could complete block 3.5G card work ? besides 3.5G...like Wimax or LTE...Do these devices also block or maybe in the future ?
wyldkao
The ZCM "beta" forum is the right place to ask this question: ZENworks Community Builds
But I think this could be done with a USB Connectivity Policy and/or with Communication Hardware Policy...
Take a look at the ZCM 11 Endpoint Security beta documentation here: Novell Doc: ZENworks 11 Endpoint Security Policies Reference - Creating Security Policies
Thomas -
How to control Payment Block field at line item level
Hi Experts,
Could anyone please let me know how to control payment block and payment method fields at line item level.
I have checked field status at posting key (OB41) and GL (OB14) level but didn’t get any parameter to control these fields.
I need your expert guidance.
Regards,
Mohammed KalimHi Mohammed,
Please go to OB24/
Select * (for all co.codes) default field status.Or Create new entry and input your co.code, Save it. Come back to co.code.
Go to payment transaction
Payment block and payment method display can be controlled from here for vendor master data
Thanks and good luck.
Regards,
Sam -
I am getting blocks of black, vertical broken lines to right of cursor, around applications on desktop and over text on internet. I recently updated from OS X Tiger to Leopard on my G5 powermac. Can anyone advise how to get rid of the blocks of lines?
What graphics card is installed?
Have you looked inside to see if the interior is dusty?
Is the graphics card dusty?
If equipped, is the fan on the graphics card turning?
Leopard uses the graphics card harder than Tiger, so weakness in the graphics card is more easily shown. -
How to address form controls in jsp page
Hello,
I have a very stupid question. How do i empty the textfield value in my jsp page. I know that i can make a function that does that. but i dont know how to adress the control. Its got to be something like txtfield.setValue("myvalue") but i just dont know
i cant find anything either on the internet. can somebody help me plz?
thx very much,
KimHi Kim,
You can use the following JavaScript command:
document.nameField.value = theValue;
You can use this on submit of the form or in a click event at the field.
I hope it be useful -
As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt -
How to use self-signed Certificate or No-Check-Certificate in Browser ?
Folks,
Hello. I am running Oracle Database 11gR1 with Operaing System Oracle Linux 5. But Enterprise Manager Console cannot display in Browser. I do it in this way:
[user@localhost bin]$ ./emctl start dbconsole
The command returns the output:
https://localhost.localdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ... ...
I open the link https://localhost.localdomain:1158/em/console/aboutApplication in browser, this message comes up:
The connection to localhost.localdomain: 1158 cannot be established.
[user@localhost bin]$ ./emctl status dbconsole
The command returns this message: not running.
[user@localhost bin]$ wget https://localhost.localdomain:1158/em
The command returns the output:
10:48:08 https://localhost.localdomain:1158/em
Resolving localhost.localdomain... 127.0.0.1
Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
ERROR: cannot verify localhost.localdomain's certificate, issued by `/DC=com/C=US/ST=CA/L=EnterpriseManager on localhost.localdomain/O=EnterpriseManager on localhost.localdomain/OU=EnterpriseManager on localhost.localdomain/CN=localhost.localdomain/[email protected]':
Self-signed certificate encountered.
To connect to localhost.localdomain insecurely, use `--no-check-certificate'.
Unable to establish SSL connection.
A long time ago when I installed Database Server Oracle 11gR1 into my computer, https://localhost.localdomain:1158/em in Browser comes up this message:
Website certified by an Unknown Authority. Examine Certificate...
I select Accept this certificate permanently. Then https://localhost.localdomain:1158/em/console/logon/logon in Browser displays successfully.
But after shut down Operating System Oracle Linux 5 and reopen the OS, https://localhost.localdomain:1158/em/console/logon/logon in Browser returns a blank screen with nothing, and no more message comes up to accept Certificate.
My browser Mozilla Firefox, dbconsole, and Database Server 11gR1 are in the same physical machine.I have checked Mozilla Firefox in the following way:
Edit Menu > Preferences > Advanced > Security > View Certificates > Certificate Manager > Web Sites and Authorities
In web sites tab, there is only one Certificate Name: Enterprise Manager on localhost.localdomain
In Authorities tab, there are a few names as indicated in the above output of wget.
My question is: How to use self-signed certificate and no-check-certificate in Mozilla Firefox for EM console to display ?
Thanks.Neither problem nor solution do involve Oracle DB
root cause of problem & fix is 100% external, detached, & isolated from Oracle DB.
This thread is OFF TOPIC for this forum. -
How to use table control in bdc, plz somebody tell me.
Hi Gurus,
Ples tell me
how to use table control in bdc, plz somebody tell me.
And send Sample CODE also. Thnaks in advance.hi,
Table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen?
Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
we can determine the number of visible lines on Transaction Screen from our Calling BDC program.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference
in Static ASSIGN and Dynamic ASSIGN.
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop.
Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6
using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: , , .
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to ,
name2 to ,
name3 to .
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using DataTable-matnr.
perform bdcfield using DataTable-menge.
perform bdcfield using DataTable-indicator.
endloop.
enddo.
example 1
BDC table control is an area on the screen in which you can display data in tabular form. You process it using a loop. Table controls are comparable to step loop tables. While a table control consists of a single definition row, step loop blocks may extend over more than one row. Table controls are more flexible than step loops, and are intended to replace them
When you need to handle a scenario like in sales order,it may contain more than one material,if you have more than one material We have to use table control,it will have number of columns and number of rows.
Table controls allow you to enter, display, and modify tabular data easily on the screen
Check this code,
PARAMETERS: file1 LIKE rlgrap-filename.
*Internal Table Declarations
DATA: BEGIN OF itab OCCURS 0,
matnr(18) TYPE c, "MaterialNumber
werks(4) TYPE c, "Plant
vdatu(10) TYPE c, "Valid From Date
bdatu(10) TYPE c, "Valid To Date
lifnr(10) TYPE c, "Vendor Number
ekorg(4) TYPE c, "Purchasing Organization
feskz TYPE c, "Fixed
autet TYPE c, "MRP Indicator
END OF itab.
DATA: bdcdata LIKE TABLE OF bdcdata WITH HEADER LINE.
*VARIABLES Declarations
DATA: wa1 LIKE LINE OF itab. "Workarea for ITAB
DATA: n TYPE i, "Check
count TYPE i.
DATA: cnt(2), "Counter
wa(15). "Workarea to hold concatenatedvalue
DATA v_msg(100).
DATA: flag.
DATA: file TYPE string.
*Initialization event
INITIALIZATION.
*At-selection-screen event
*To provide Input help for file name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = file1.
*START-OF-SELECTION EVENT
START-OF-SELECTION.
MOVE file1 TO file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*To populate BDCDATA and start data transfer
LOOP AT itab .
To validate Plant range
IF itab-werks = '1000' OR itab-werks = '2000'
OR itab-werks = '1008'.
AT NEW werks.
CLEAR: n.
cnt = 1.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EORD-MATNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EORD-MATNR'
itab-matnr.
PERFORM bdc_field USING 'EORD-WERKS'
itab-werks.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0205'.
CONCATENATE 'EORD-EKORG(' cnt ')' INTO wa.
PERFORM bdc_field USING 'BDC_CURSOR'
wa.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
ENDAT.
IF n = 12.
READ TABLE bdcdata WITH KEY fval = '=BU'.
bdcdata-fval = '=NS'.
MODIFY bdcdata INDEX sy-tabix TRANSPORTING fval.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0205'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EORD-VDATU(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
cnt = 2.
n = 2.
ENDIF.
CONCATENATE 'EORD-VDATU(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-vdatu.
CONCATENATE 'EORD-BDATU(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-bdatu.
CONCATENATE 'EORD-LIFNR(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-lifnr.
CONCATENATE 'EORD-EKORG(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-ekorg.
CONCATENATE 'RM06W-FESKZ(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-feskz.
CONCATENATE 'EORD-AUTET(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-autet.
IF n <> 12.
n = cnt.
ENDIF.
cnt = cnt + 1.
AT END OF werks.
CALL TRANSACTION 'ME01' USING bdcdata
UPDATE 'S'
MODE 'A'.
CLEAR:bdcdata,bdcdata[].
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
lang = 'EN'
no = sy-msgno
v1 = sy-msgv1
v2 = sy-msgv2
v3 = sy-msgv3
v4 = sy-msgv4
IMPORTING
msg = v_msg.
WRITE:/ v_msg.
CLEAR: bdcdata,bdcdata[],flag.
ENDAT.
ENDIF.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.
Insert field values
FORM bdc_field USING fnam fval.
IF NOT fval IS INITIAL.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
CLEAR wa.
ENDFORM.
Sample code 2
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards -
How to use table control in bdc briefly?
how to use table control in bdc briefly in description manner ?
Hi friend,
here i am giving exm. code of table control.see if help full to u.
REPORT zxk_01
NO STANDARD PAGE HEADING LINE-SIZE 255.
include bdcrecx1.
TYPES : BEGIN OF ty_data,
line(100) TYPE c,
END OF ty_data.
PARAMETERS: p_pcfile LIKE ibipparms-path DEFAULT 'D:\NKS.TXT'.
DATA : g_filename TYPE string.
TYPES : BEGIN OF ty_file,
lifnr(16) TYPE c, " vendor
bukrs(4) TYPE c, "company code
ktokk(4) TYPE c, " Acc grp
anred(15) TYPE c, " Title
name1(35) TYPE c, " name
sortl(10) TYPE c, " search term
stras(35) TYPE c, " street
ort01(35) TYPE c, " city
ort02(35) TYPE c, " district
land1(3) TYPE c, " country
pfach(10) TYPE c, " PO BOx
spras(2) TYPE c, " language
kunnr(10) TYPE c, " Customer
vbund(6) TYPE c, " trading partner
banks(3) TYPE c, " BANK COUNTRY
bankl(15) TYPE c, " BANK KEY
bankn(18) TYPE c, " BANK ACC
koinh(60) TYPE c, " ACC HOLDER
bkont(2) TYPE c, " CK
bvtyp(4) TYPE c, " BNKT
bkref(20) TYPE c, " REFERENCE DETAILS
namev(35) TYPE c, " first NAME
name2(35) TYPE c, " NAME
telf1(16) TYPE c, " TELEPHONE
abtnr(4) TYPE c, " DEPTT
pafkt(2) TYPE c, " FUNCTION
akont(10) TYPE c, " REC ACCOUNT
zuawa(3) TYPE c, " SORT KEY
lnrze(10) TYPE c, "HEAD OFFICE
fdgrv(10) TYPE c, " CASH MGMT GRP,
frgrp(4) TYPE c, " RELEASE GRP
zterm(4) TYPE c, " PAY TERMS
togru(4) TYPE c, " TOLERENCE GRP,
reprf, "CHECK DOUBLE INV
zwels(10) TYPE c, " PAYMENTS METHODS
zahls, " PAYMENTS BLOCK
hbkid(5) TYPE c, " house bank
zgrup(2) TYPE c, " grouping key
mahna(4) TYPE c, " dunn procedure
mansp, " DUNNING BLOCK'
gmvdt(10) TYPE c, " LEGAL DONE PROCEDURE
lfrma(10) TYPE c, " DUNN RECEPIENT
madat(10) TYPE c, " LAST DUNNED
mahns(1) TYPE c, " dunning level
mgrup(2) TYPE c, " grouping key
busab(2) TYPE c, "dunning clerk
END OF ty_file.
DATA : BEGIN OF it_xk01 OCCURS 0,
lifnr(16) TYPE c, " vendor
bukrs(4) TYPE c, "company code
ktokk(4) TYPE c, " Acc grp
anred(15) TYPE c, " Title
name1(35) TYPE c, " name
sortl(10) TYPE c, " search term
stras(35) TYPE c, " street
ort01(35) TYPE c, " city
ort02(35) TYPE c, " district
land1(3) TYPE c, " country
pfach(10) TYPE c, " PO BOx
spras(2) TYPE c, " language
kunnr(10) TYPE c, " Customer
vbund(6) TYPE c, " trading partner
akont(10) TYPE c, " REC ACCOUNT
zuawa(3) TYPE c, " SORT KEY
lnrze(10) TYPE c, "HEAD OFFICE
fdgrv(10) TYPE c, " CASH MGMT GRP,
frgrp(4) TYPE c, " RELEASE GRP
zterm(4) TYPE c, " PAY TERMS
togru(4) TYPE c, " TOLERENCE GRP,
reprf, "CHECK DOUBLE INV
zwels(10) TYPE c, " PAYMENTS METHODS
zahls, " PAYMENTS BLOCK
hbkid(5) TYPE c, " house bank
zgrup(2) TYPE c, " grouping key
mahna(4) TYPE c, " dunn procedure
mansp, " DUNNING BLOCK'
gmvdt(10) TYPE c, " LEGAL DONE PROCEDURE
lfrma(10) TYPE c, " DUNN RECEPIENT
madat(10) TYPE c, " LAST DUNNED
mahns(1) TYPE c, " dunning level
mgrup(2) TYPE c, " grouping key
busab(2) TYPE c, "dunning clerk
END OF it_xk01.
internal table for bank detaiils
DATA : BEGIN OF it_bank OCCURS 0,
banks(3) TYPE c, " BANK COUNTRY
bankl(15) TYPE c, " BANK KEY
bankn(18) TYPE c, " BANK ACC
koinh(60) TYPE c, " ACC HOLDER
bkont(2) TYPE c, " CK
bvtyp(4) TYPE c, " BNKT
bkref(20) TYPE c, " REFERENCE DETAILS
lifnr(16) TYPE c, " vendor
xezer, " CHECK
END OF it_bank.
INTERNAL TABLE FOR CONTACT PERSON
TYPES : BEGIN OF ty_cust,
lifnr(16) TYPE c,
namev(35) TYPE c, " first NAME
name1(35) TYPE c, " NAME
telf1(16) TYPE c, " TELEPHONE
abtnr(4) TYPE c, " DEPTT
pafkt(2) TYPE c, " FUNCTION
END OF ty_cust.
INTERNAL TABLES DECLARATION
DATA : it_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE,
it_bdcmsgcoll LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
it_file TYPE TABLE OF ty_file,
it_data TYPE TABLE OF ty_data,
it_cust TYPE TABLE OF ty_cust.
WORK AREAS FOR TYPES
DATA : wa_xk01 LIKE it_xk01,
wa_data TYPE ty_data,
wa_file TYPE ty_file,
wa_bank LIKE it_bank,
wa_cust TYPE ty_cust.
*CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = lt_file
filetype = 'ASC'
CHANGING
data_tab = iT_DATA.
IF sy-subrc <> 0.
ENDIF.
g_filename = p_pcfile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = g_filename "'D:\TESTDATA1_XK01.txt'
filetype = 'TXT'
has_field_separator = 'X'
HEADER_LENGTH = 0
read_by_line = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
replacement = ' '
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_file
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it_file INTO wa_file .
ON CHANGE OF WA_FILE-LIFNR.
wa_xk01-lifnr = wa_file-lifnr.
wa_xk01-bukrs = wa_file-bukrs.
wa_xk01-ktokk = wa_file-ktokk.
wa_xk01-anred = wa_file-anred.
wa_xk01-name1 = wa_file-name1.
wa_xk01-sortl = wa_file-sortl.
wa_xk01-stras = wa_file-stras.
wa_xk01-ort01 = wa_file-ort01.
wa_xk01-ort02 = wa_file-ort02.
wa_xk01-land1 = wa_file-land1.
wa_xk01-pfach = wa_file-pfach.
wa_xk01-spras = wa_file-spras.
wa_xk01-kunnr = wa_file-kunnr.
wa_xk01-vbund = wa_file-vbund.
wa_xk01-akont = wa_file-akont.
wa_xk01-zuawa = wa_file-zuawa.
wa_xk01-lnrze = wa_file-lnrze.
wa_xk01-fdgrv = wa_file-fdgrv.
wa_xk01-frgrp = wa_file-frgrp.
wa_xk01-zterm = wa_file-zterm.
wa_xk01-togru = wa_file-togru.
wa_xk01-reprf = wa_file-reprf.
wa_xk01-zwels = wa_file-zwels.
wa_xk01-zahls = wa_file-zahls.
wa_xk01-hbkid = wa_file-hbkid.
wa_xk01-zgrup = wa_file-zgrup.
wa_xk01-mahna = wa_file-mahna.
wa_xk01-mansp = wa_file-mansp.
wa_xk01-gmvdt = wa_file-gmvdt.
wa_xk01-lfrma = wa_file-lfrma.
wa_xk01-madat = wa_file-madat.
wa_xk01-mahns = wa_file-mahns.
wa_xk01-mgrup = wa_file-mgrup.
wa_xk01-busab = wa_file-busab.
APPEND wa_xk01 TO it_xk01.
CLEAR : WA_XK01.
CONTINUE.
ENDON.
IF WA_FILE-BANKS NE ''.
wa_bank-lifnr = wa_file-lifnr.
wa_bank-banks = wa_file-banks.
wa_bank-bankl = wa_file-bankl.
wa_bank-bankn = wa_file-bankn.
wa_bank-koinh = wa_file-koinh.
wa_bank-bkont = wa_file-bkont.
wa_bank-bvtyp = wa_file-bvtyp.
wa_bank-bkref = wa_file-bkref.
wa_cust-lifnr = wa_file-lifnr.
wa_cust-namev = wa_file-namev.
wa_cust-name1 = wa_file-name2.
wa_cust-telf1 = wa_file-telf1.
wa_cust-abtnr = wa_file-abtnr.
wa_cust-pafkt = wa_file-pafkt.
APPEND wa_bank TO it_bank.
APPEND wa_cust TO it_cust.
APPEND wa_xk01 TO it_xk01.
CLEAR : wa_bank , wa_cust.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT it_xk01 INTO wa_xk01.
REFRESH it_bdcdata.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
wa_xk01-lifnr. " vendor
PERFORM bdc_field USING 'RF02K-BUKRS'
wa_xk01-bukrs. " company cpode
PERFORM bdc_field USING 'RF02K-KTOKK'
wa_xk01-ktokk. " Acc group
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
wa_xk01-anred. " title
PERFORM bdc_field USING 'LFA1-NAME1'
wa_xk01-name1. " name
PERFORM bdc_field USING 'LFA1-SORTL'
wa_xk01-sortl. " ' search term'
PERFORM bdc_field USING 'LFA1-STRAS'
wa_xk01-stras. "street'
PERFORM bdc_field USING 'LFA1-PFACH'
wa_xk01-pfach. " po box
PERFORM bdc_field USING 'LFA1-ORT01'
wa_xk01-ort01. " city
PERFORM bdc_field USING 'LFA1-ORT02'
wa_xk01-ort02. " district
PERFORM bdc_field USING 'LFA1-LAND1'
wa_xk01-land1. " country
PERFORM bdc_field USING 'LFA1-SPRAS'
wa_xk01-spras. " language
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-VBUND'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-KUNNR' " customer
wa_xk01-kunnr.
PERFORM bdc_field USING 'LFA1-VBUND'
wa_xk01-vbund. " trading partner
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BKREF(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
DATA : fnam(20) TYPE c,
int TYPE c.
MOVE 1 TO int.
CLEAR wa_bank.
LOOP AT it_bank INTO wa_bank WHERE lifnr = wa_xk01-lifnr.
CONCATENATE 'LFBK-BANKS(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-banks. " city
CONCATENATE 'LFBK-BANKL(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bankl.
CONCATENATE 'LFBK-BANKN(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bankn.
CONCATENATE 'LFBK-KOINH(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-koinh.
CONCATENATE 'LFBK-BKONT(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bkont.
CONCATENATE 'LFBK-BVTYP(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bvtyp.
CONCATENATE 'LFBK-BKREF(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bkref.
int = int + 1.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0380'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KNVK-PAFKT(05)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
DATA : fnam1(20) TYPE c,
cnt.
cnt = 1.
CLEAR : wa_cust.
LOOP AT it_cust INTO wa_cust WHERE lifnr = wa_xk01-lifnr.
CONCATENATE 'KNVK-NAMEV(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-namev.
CONCATENATE 'KNVK-NAME1(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-name1.
CONCATENATE 'KNVK-TELF1(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-telf1.
CONCATENATE 'KNVK-ABTNR(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-abtnr.
CONCATENATE 'KNVK-PAFKT(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-pafkt.
cnt = cnt + 1.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0380'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KNVK-NAMEV(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FRGRP'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
wa_xk01-akont. " REC aCC
PERFORM bdc_field USING 'LFB1-ZUAWA'
wa_xk01-zuawa. " SORT KEY
PERFORM bdc_field USING 'LFB1-LNRZE'
wa_xk01-lnrze. " HEAD OFFICE
PERFORM bdc_field USING 'LFB1-FDGRV'
wa_xk01-fdgrv. " CASH MGMT GRP
PERFORM bdc_field USING 'LFB1-FRGRP'
wa_xk01-frgrp. " RELEASE GRP
PERFORM bdc_field USING 'LFB1-CERDT'
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZGRUP'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-ZTERM'
wa_xk01-zterm. " PAYMENT TERMS'
PERFORM bdc_field USING 'LFB1-TOGRU'
wa_xk01-togru. " TOLERENCE GRP
PERFORM bdc_field USING 'LFB1-REPRF'
wa_xk01-reprf. " CHECK DOUBLE INV
PERFORM bdc_field USING 'LFB1-ZWELS'
wa_xk01-zwels. " PAYMENT METHOD
PERFORM bdc_field USING 'LFB1-ZAHLS'
wa_xk01-zahls. " PAYMENT BLOCK
PERFORM bdc_field USING 'LFB1-HBKID'
wa_xk01-hbkid. " HOUSE BANK
PERFORM bdc_field USING 'LFB1-ZGRUP'
wa_xk01-zgrup. " GROUPING KEY
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-BUSAB'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB5-MAHNA'
wa_xk01-mahna. " DUNN PROCEDURE
PERFORM bdc_field USING 'LFB5-MANSP'
wa_xk01-mansp. " DUNNING BLOCK
PERFORM bdc_field USING 'LFB5-LFRMA'
wa_xk01-lfrma. " Dunn representative
PERFORM bdc_field USING 'LFB5-GMVDT'
wa_xk01-gmvdt. " legal dunn proc
PERFORM bdc_field USING 'LFB5-MADAT'
wa_xk01-madat. " last dunned
PERFORM bdc_field USING 'LFB5-MAHNS'
wa_xk01-mahns. " dunn level
PERFORM bdc_field USING 'LFB5-BUSAB'
wa_xk01-busab. " dunning clerk
PERFORM bdc_field USING 'LFB1-MGRUP'
wa_xk01-mgrup. " grouping key
CALL TRANSACTION 'XK01' USING it_bdcdata
MODE 'A'.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR it_bdcdata.
it_bdcdata-program = program.
it_bdcdata-dynpro = dynpro.
it_bdcdata-dynbegin = 'X'.
APPEND it_bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field
FORM bdc_field USING fnam fval TYPE any.
CLEAR it_bdcdata.
it_bdcdata-fnam = fnam.
it_bdcdata-fval = fval.
APPEND it_bdcdata.
ENDFORM. "bdc_field
*perform close_group. -
Q: how can i write PL/SQL block to check prerequisite?
Hello...
I designed an application using sql*plus statment for creating database and developer for creating forms, for on-line registration system for universties,
so I need to teach me how can I write pl/sql block to check the prerequisite, taken courses, and complete hours for the students who wants register the courses via Internet.
thanks alot in advance
kindly send the answers a.s.a.pplease repost this in the SQL & PL/SQL forum
thanks - OTN -
How do I uninstall Verizon Internet Security Suite!?
Today, I tried to open Verizon Internet security suite, only to find that it had completely stopped working. When I opened VISS I got a small window that says"this webpage could not be displayed", instead of the list of options I usually get.
I figured my best option would be to uninstall and reinstall VISS... But that didn't go so well. The usual method of going into the control panel, and removing it through the "Programs and Features" menu wouldn't work, because the window telling me that, "this webpage could not be displayed" kept showing up.
Next, I tried using Revo uninstaller to remove VISS and all it's components, and the same thing happened. Revo Uninstaller deleted VISS anyway, but this ended up crippling my wireless internet connection. I had to use a system restore point to undo this... And now VISS seems to be stuck on my computer.
Does anyone know how to completely remove verizon internet security suite from a PC? BTW My OS is Windows 7.How to uninstall or reinstall supported McAfee consumer products using the McAfee Consumer Products ...
Summary: This document explains how to remove and reinstall McAfee Consumer products using the McAfee Consumer Products Removal tool. This option should only be used after you remove your McAfee product through Add/Remove Programs.
they have an uninstall tool for when it's being fiesty and doesn't want to uninstall. give it a whirl -
How do i get multiple internet screens going on Safari?
How do I get multiple internet screens going on Safari at the same time?
Do you mean "New window" (command-n) or "New tab" (command-t)? Are you in "Full Screen Mode"? If so, hit the escape key to exit that mode before making a new window or tab. Use Expose/Mission Control to manage windows.
charlie -
How can I read the internet speed in a MAC?
How can I find the INTERNET SPEED in a MAC?
You typically use a free Internet Speed test. It does an upload and a download from a known site, bypassing certain configuration problems. Just do a search to find a dozen services eager to test with you (in exchange for the Ads on their pages).
Do not pay for this service, and DO NOT accept any CR@P they suggest you download to "fix" your speed. They cannot tell from outside whether you have problems, and none of the things you can download ever makes anything better.
If using Wi-Fi, one generally finds that the Wi-Fi part of the connection is the limiting factor. -
Hi abapers how to handle table control in bdc
hi experts please guide me
how to handle table control in bdc? could u please explain me briefly
thanks and regardssayeed,
Go thru this code it may help you. check bold code for the table control..
report zsunil_bdc
no standard page heading line-size 255.
INTERNAL TABLES *
DATA: BEGIN OF IT_KNA1 OCCURS 0,
CUSTOMER LIKE RF02D-KUNNR,
COMPANY_CODE LIKE RF02D-BUKRS,
ACCOUNT_GROUP LIKE RF02D-KTOKD,
TITLE LIKE KNA1-ANRED,
NAME LIKE KNA1-NAME1,
SEARCH_TERM LIKE KNA1-SORTL,
STREET LIKE KNA1-STRAS,
CITY LIKE KNA1-ORT01,
POSTAL_CODE LIKE KNA1-PSTLZ,
COUNTRY LIKE KNA1-LAND1,
LANGUAGE_KEY LIKE KNA1-SPRAS,
CNTRY LIKE KNBK-BANKS,
BANK_KEY LIKE KNBK-BANKL,
BANK_ACCOUNT LIKE KNBK-BANKN,
REC_ACCOUNT LIKE KNB1-AKONT,
END OF IT_KNA1.
DATA: IT_BDCDATA TYPE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: IT_MESSAGES TYPE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER P_FILE TYPE RLGRAP-FILENAME DEFAULT 'C:\CUSTOMER.TXT'
OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION SCREEN *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM HELP_FILE USING P_FILE.
START OF SELECTION *
START-OF-SELECTION.
*UPLOADING THE FILE FROM WORKSTATION
PERFORM UPLOAD_FILE USING P_FILE.
*POPULATING DATA.
PERFORM POPULATE_FILE.
*& Form HELP_FILE
text
-->P_P_FILE text
form HELP_FILE using p_p_file.
DATA: L_FILE TYPE IBIPPARMS-PATH.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = L_FILE.
P_P_FILE = L_FILE.
endform. " HELP_FILE
*& Form UPLOAD_FILE
text
-->P_P_FILE text
form UPLOAD_FILE using p_p_file.
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = 'P_P_FILE'
FILETYPE = 'DAT'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
TABLES
data_tab = IT_KNA1
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " UPLOAD_FILE
*& Form POPULATE_FILE
text
--> p1 text
<-- p2 text
form POPULATE_FILE .
DATA: L_STRING TYPE STRING,
L_COUNTER(2) TYPE N,
V_INDEX TYPE SY-TABIX.
LOOP AT IT_KNA1.
V_INDEX = SY-TABIX.
AT NEW CUSTOMER.
READ TABLE IT_KNA1 INDEX V_INDEX.
IF SY-SUBRC = 0.
perform bdc_dynpro using 'SAPMF02D' '0105'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KTOKD'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02D-KUNNR'
IT_KNA1-CUSTOMER.
perform bdc_field using 'RF02D-BUKRS'
IT_KNA1-COMPANY_CODE.
perform bdc_field using 'RF02D-KTOKD'
IT_KNA1-ACCOUNT_GROUP.
*PERFORM BDC_FIELD USING 'RF02D-D0130'
'X'.
perform bdc_dynpro using 'SAPMF02D' '0110'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-SPRAS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'KNA1-ANRED'
IT_KNA1-TITLE.
perform bdc_field using 'KNA1-NAME1'
IT_KNA1-NAME.
perform bdc_field using 'KNA1-SORTL'
IT_KNA1-SEARCH_TERM.
perform bdc_field using 'KNA1-STRAS'
IT_KNA1-STREET.
perform bdc_field using 'KNA1-ORT01'
IT_KNA1-CITY.
perform bdc_field using 'KNA1-PSTLZ'
IT_KNA1-POSTAL_CODE.
perform bdc_field using 'KNA1-LAND1'
IT_KNA1-COUNTRY.
perform bdc_field using 'KNA1-SPRAS'
IT_KNA1-LANGUAGE_KEY.
perform bdc_dynpro using 'SAPMF02D' '0120'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02D' '0130'.
PERFORM BDC_FIELD USING 'RF02D-D0130'
'X'.
perform bdc_field using 'BDC_CURSOR'
'KNBK-BANKN(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02D' '0210'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-AKONT'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
perform bdc_field using 'KNB1-AKONT'
IT_KNA1-REC_ACCOUNT.
perform bdc_dynpro using 'SAPLRSFH' '0100'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RSIODYNP4-LOW(01)'.
ENDIF.
ENDAT.
L_COUNTER = L_COUNTER + 1.
CLEAR L_STRING.
CONCATENATE 'KNBK-BANKS(' L_COUNTER ')' INTO L_STRING.
PERFORM BDC_FIELD USING L_STRING
IT_KNA1-CNTRY.
CLEAR L_STRING.
CONCATENATE 'KNBK-BANKL(' L_COUNTER ')' INTO L_STRING.
PERFORM BDC_FIELD USING L_STRING
IT_KNA1-BANK_KEY.
CLEAR L_STRING.
CONCATENATE 'KNBK-BANKN(' L_COUNTER ')' INTO L_STRING.
PERFORM BDC_FIELD USING L_STRING
IT_KNA1-BANK_ACCOUNT.
AT END OF CUSTOMER.
READ TABLE IT_KNA1 INDEX V_INDEX.
IF SY-SUBRC = 0.
CALL TRANSACTION 'FD01' USING IT_BDCDATA MODE 'A' UPDATE 'S' MESSAGES
INTO IT_MESSAGES.
IF SY-SUBRC <> 0.
PERFORM EMPLOYEEID_ERROR.
*ELSE.
ENDIF.
WRITE: SY-SUBRC.
perform message_format_write.
*ENDIF.
*WRITE: SY-SUBRC.
CLEAR IT_BDCDATA.
REFRESH IT_BDCDATA.
ENDIF.
ENDAT.
ENDLOOP.
endform. " POPULATE_FILE
*& Form bdc_dynpro
text
-->P_0224 text
-->P_0225 text
form bdc_dynpro using value(p_0224)
value(p_0225).
IT_BDCDATA-PROGRAM = P_0224.
IT_BDCDATA-DYNPRO = P_0225.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
CLEAR IT_BDCDATA.
endform. " bdc_dynpro
*& Form bdc_field
text
-->P_0229 text
-->P_0230 text
form bdc_field using value(p_0229)
value(p_0230).
IT_BDCDATA-FNAM = P_0229.
IT_BDCDATA-FVAL = P_0230.
APPEND IT_BDCDATA.
CLEAR IT_BDCDATA.
endform. " bdc_field
*& Form EMPLOYEEID_ERROR
text
--> p1 text
<-- p2 text
form EMPLOYEEID_ERROR .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'Z50583_REC1'
HOLDDATE = FILLER8
KEEP = 'X'
USER = SY-UNAME
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FD01'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
dynprotab = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " EMPLOYEEID_ERROR
*& Form message_format_write
text
--> p1 text
<-- p2 text
form message_format_write .
DATA: L_MSG(200).
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = SY-LANGU
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
WRITE: / L_MSG.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " message_format_write
~~Guduri
Maybe you are looking for
-
My iPod classic tries to sync evertime I add any music to it
I recently bought a new iPod classic 80 Gb. I have managed to transfer all the music I had on my old one to the new one but this took a while so I am reluctent to restore unless I have to. But that all worked fine. I am set up to update manually, not
-
Error while installing cs6 on windows 7 64 bit platform
Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DF012 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 3 error(s), 2 w
-
Page Background, Borders
Help. I'm building a board report. I'm laying it out in Flash and converting it to a TIFF file using Microsoft Image Maker. I can also convert to PDF if needed. The problem is, I cannot get the flash stage to match the size of the pdf page or tiff pa
-
I shot a wedding in August and it was terribly hot in the church. They had setup many many fans to cool off the audience, which was nice but the audio for the ceremony has the underlying fan noise in it. The groom was mic'd and the only other source
-
According to the new features listed with the new Pages app, there is supposed to be a new font size selector on the ruler in addition to the Style, Bold, Italic, Underline, and Tab stuff. I do not see it. Does anyone else see it?