How to automount with polkit in kde 4.4

Try editing /etc/dbus-1/system.d/hal.conf to match similar to this & substitute your username.
Automount in Dolphin without FSTAB entry:
Look for following, and ad entry for USERNAME:


<policy user="hal">
<allow own="org.freedesktop.Hal"/>
</policy>
<policy user=USERNAME">
<allow own="org.freedesktop.Hal"/>
</policy>
<policy user="root">
<allow own="org.freedesktop.Hal"/>
</policy>
Add the following after root entry:
</policy>

<policy user="arch1">
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.CPUFreq"/>
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.DockStation"/>
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.KillSwitch"/>
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.KeyboardBacklight"/>
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.Leds"/>
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.LightSensor"/>
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.Storage"/>
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.Storage.Removable"/>
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.Volume"/>
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
<allow send_destination="org.freedesktop.Hal"
send_interface="org.freedesktop.Hal.Device.WakeOnLan"/>
</policy>
</busconfig>
Allowing all items in system to be automounted in Dolphin (Hard-drives NTFS & all,) USB drives & DVD/ CDs as well.:)

You got it
10.4 represents a bygone age in most cases such as this. Bonjour won't be happy.
You can always email to your self on the mac and then print...

Similar Messages

How to work with 360 video?

I am new to AE and am trying to work with a 360 equirectangular video I shot with a Freedom 360 and 6 go pros.
Are there any tutorials on how to work with 360 spherical videos? Do I need to download additional plugins?
Thank you,
Phil

Phil,
Of course, the image needs to be big for this, but the plugin you would use is CC Sphere.
Drop your movie into a composition and apply CC Sphere to the video.
Then set the Render option in the effect to "Inside".
Under Shading set Ambient to 100% and Diffuse to 0%.
Then scale inside the effect until the image fills the screen.
Then you'll be able to use the Rotate Y controls in CC Sphere to spin around inside your video!
You can also add Optics Compensation and Reverse the Lens Distortion to straighten out your image.
Let me know if you have any questions!
Trent

[solved] Issue with conky and Kde 4

I have a small issue with conky and KDE 4.2. I start conky with a script which I stored under ~/.kde/Autostart. The script is simple and looks like this..
conky -c ~/.conkyrc_kde4
This works fine. But when I restart the first KDE and check with ps, I have 2 instances of conky running. The instances keep on growing with the number of restarts.
I think kde tries to restart all the apps which were running when the session was terminated. Is there a way to change this behavior in general or all the programs or for only a specific program like conky ?
Last edited by rangalo (2009-07-28 19:02:17)

I did
Systemsettings > Advanced > Session Manager > Start with an empty session
and put everything you want in Autostart

I am having much trouble with the new reminders in IOS7 and how it interacts with Outlook Exchange. Many features lost in the new version.

When I downloaded IOS7, I found that the reminders/task app and how it interacts with Outlook Exchange is much more difficult to use. Some of the issues that I am having are...
1. Trying to edit my task on my phone is not possible, if the notes are lengthy. When you click on the text to edit data near the top, it will scroll to the bottom and not allow you to edit the text because you cant see it.
2. Now all of my task are in one long list. I can not move from day to day like we could in previous version IOS6
3. When I do edit a short task reminder and click done, it crashes and completly goes away. It does save the edit though
4. You can only add task at the bottom of each days reminders. This is very inconvient and much more difficult than IOS6
5. There is a major delay or latency when interacting inside of reminders in this version. Much more than IOS6. It is very unstable and quirky.
I have never seen Apple take a step back with a product until now. I am a huge Apple fan and always will be, so I am hoping they make enhancements to fix these issue. It is a big time prodcutivity killer.
Thanks for any and all help you can give.
Troy Meachum

Some power supplies or designed so that if there is a short or overload they shut them selfs off and some will not turn back on. Some have a relay that will click back on and work, some you have to cycle the power switch. Those that won't come back on will have to be replaced. I'm not saying that yours is that type as I have no way of telling. But if you have a friend who will loan you a good power supply you might try it. As someone else said just turning off the power will not darn all the power from some motherboards. To test this turn off your power supply than turn on the computer with the start botton. Mine will flash the lights and fans will start to spin than die. So every time you turn off computer to work on it. After turning off PSU hit the start botton to drian any power left in it before working on it. Also do this after unplugging it just to make sure.

How to deal with deadlock on wwv_flow_data table when http server times out

There are some threads about a deadlock on the wwv_flow_data table. None of them contain a real explanation for this behaviour. In my case I will try to explain what I think is happening. Maybe it helps somebody who is hitting the same matter.
In my case with APEX 3.2.1 I am navigating from one page to another. Doing this APEX will lock the table wwv_flow_data. As soon as the other page is shown the lock will be released. But now this other page contains a bad performing query (standaard report region). After 5 minutes the http server (modplsql) will time out and present the message "No response from the application server" on the screen. In the meanwhile the query is still running on the database server and the lock stays on the wwv_flow_data table.
Normal user behaviour will be that the user will use the back button to return to the previous page and tries it again to navigate to the other page or
the user will try to refresh the page with the bad performing query.
And voila now you will have a deadlock on the wwv_flow_data table since a second session is trying to do the same thing while the first hasn't finished yet.
How to deal with it?
First of all. Have a good look at the bad performing query. Maybe you can improve it that it will succeed before the http server will timeout.
In my case the 11gr1 optimizer couldn't handle a subquery factoring clause in the best way. After changing it back to a classical inline query the problem was solved.
Secondly you could increase the timeout parameter of the http server. Although this not the best way.
Maybe it would better if APEX in a next version would release the lock on the table wwv_flow_date earlier or do a rollback just before the moment that the http server is timing out.
regards,
Mathieu Meeuwissen

Hello Shmoove,
I saw your reply here and you probably understand the problems the HTTP 100 response may cause.
I am trying to send image that was taken by getSnapshot. The problem is that the server respond with this HTTP 100 message.
I suspect that the reason that my server doesn't recognize the file that I'm sending from J2me is that the "server to client" response to the 100 message comes after the second message of (see what the TCPIP viewer shows down here):
POST /up01/up02.aspx HTTP/1.1
Content-Type: multipart/form-data; boundary=xxxxyyyyzzz
Connection: Keep-Alive
Content-length: 6294
User-Agent: UNTRUSTED/1.0
Host: szekely.dnsalias.com:80
Transfer-Encoding: chunked
400: Client to Server (126 bytes)
78
--xxxxyyyyzzz
Content-Disposition: form-data; name="pic"; filename="david.jpg"
Content-Type: application/octet-stream
400: Connected to Server
400: Server to Client (112 bytes)
HTTP/1.1 100 Continue
Server: Microsoft-IIS/5.1
Date: Wed, 23 Mar 2005 00:47:02 GMT
X-Powered-By: ASP.NET
Any help will be appreciated,
David

How to sync with two computers not at the same time, I'm registerd with one computer

How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?

Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

How to agree with terms of i tune in order to update applications

How to agree with terms of i tune in order to update applications

Are you agreeing to the terms, but then being asked to agree to them again and again, endlessly? Or is something a bit different going on?

How to deal with OpenCL grey out issue.

First off, I'm not native english speaker.
I have Nvidia GeForce 550 Ti video card, and its support OpenCL v1.1.
I'm also face a "random" OpenCL grey out issue like other people here, but I found the "issue" and how to deal with.
open a command windows (using WinKey + R, and type cmd <enter>)
type "cd C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)" <enter>
type "sniffer_gpu" <enter> -->> to check your GPU has OpenCL in Photoshop?
When GPU is in power-saving mode (core running in 51Mhz, using MSI Afterburner monitor), I running sniffer_gpu, got this report
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 0000000000328D68 has video RAM(MB): 1023
Vendor string:    NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string:   3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
Return code: 1
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
No OpenCL support
Then, I switch GPU back to normal status (core running at 900Mhz)
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 00000000001F8D68 has video RAM(MB): 1023
Vendor string:    NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string:   3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
OpenCL support !!
Nowadays, most of new GPUs were support power-saving, but when sniffer_gpu running at GPU power-saving state, the OpenCL computing report maybe "time-out", cause the detector "guess" the GPU does not support OpenCL. This is why many people says "OpenCL" sometimes work, sometimes grey-out.
I hope this bug can be fixed, or at least people can understand how to "enable OpenCL everytime when you launch photoshop".
Bye.

Do check the following link
http://blogs.oracle.com/soabpm/2010/01/soa_suite_11g_weblogictransact.html

How to deal with "Error 1001. The specified service already exists" when install a service using installer package?

Hi everybody,
I wrote a "Class Library" project which is a service using Visual Stodio 2008 recently, then tried to use a Visual Studio 2008
Setup Project to install it.
Here is what I did for the "Class Library":
1. Finish the program.cs, Service.cs
2. Add Installer
3. Change the serviceInstaller so that "StartType" to be Aotumatic
4. Change the ServiceProcessInstaller2 so that "Account" to be LocalSystem
5.
6. Click in F5 (Start Debugging)
Here is what I did for the Setup Project:
1. Add the exe file built from the "Class Library" project to the Application Folder
2. On the Custom Action Editor, add the exe file from 1 to Install and Commit
3. Change the property of the project so that "RemovePreviousVersion" to be true
4. Click on F6(Build Solution)
Then I tried to run the msi file from the built of the Setup Project. Because I modified the two projects serveral times, I uninstalled the Class Library using "Control Panel->Add or Remove Programs" before I reinstall. Two things I notived:
1. After unstall, the registry was not cleaned up about the installed program
2. After several rounds install/uninstall, I got "Error 1001. The specified service already exists"
My questions are:
1. How to cleanup the registry when uninstall a program?
2. How to deal with the "Error 1001. The specified service already exists"?
3. Did I do anytbing wrong with the "Class Library" or the "Setup Project"?
Thanks a lot!
Helen

Hi Simon, not a problem!
I spent some more time on this and here are few more notes:
it is called Major Upgrade, when you are installing new version of the product upon a previous one and
MSI supports 2 strategies:
Strategy 1. Install a new version and uninstall previous one. (Install a new version right upon previously installed version (file merging is performed based on dll version number) and the delete previously
installed files)
Strategy 2. Uninstall previous version and install a new one (Delete all previous files and install from scratch new files.)
From the first look it seems that 1st strategy is weird and buggy. But, remember, MSI is great because it's transactional!!! That means that if once some of the phases (Installation, Uninstallation, Rollback, Comit) fails, your machine
will be reverted to the previous state and it'll be still functional.
Let's consider both strategies:
Consider you have installed product_v1.msi and you want to install product_v2.msi.
Strategy 1
1. MSI engine copies files from Product_v1 directory to TEMP directory
2. MSI engine merges files based on the assembly version (between v1 and v2)
3. Once merging is completed successfully it removes files in TEMP (RemoveExistingProducts action triggers it) and you got product_v2 installed, otherwise if it fails MSI engine revert machine to V1 and copies previous files from TEMP.
Strategy 2
1. MSI engine tottaly removes all files from v1.
2. MSI engine installs v2 files and if something goes wrong you cannot revert back, because RemoveExistingProducts allready worked out and MSI doesn't have files to revert machine back
I recommend to everybody to use Strategy 1 and leverage MSI transaction functionality. And you can set this strategies by defining sequence of RemoveExistingProducts action. See more info
here. So, I think it's not even a bug in VS as I said in the upper post it is default recommened behaviour.
AND, you got "Error 1001. The specified service already exists"
because if we follow Strategy 1 MSI engine tries to install Windows Service on top of the existing service and OF COURSE it fails MSI engine (StopServices, DeleteServices actions are executed before actual
installation and they look at ServiceControl table). In order to stop service first and delete them you have to fill ServiceContol table of the MSI (and then StopServices, DeleteServices actions will recognize what to they have to stop
and delete), like this:
*clip*clip*clip*
' see http://msdn.microsoft.com/en-us/library/windows/desktop/aa371634(v=vs.85).aspx for more info
' Update the Service Entry to stop and delete service while uninstalling
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD_Service', 'Service name', '160', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
' Update the Service Entry to stop and delete service while installing
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD2_Service', 'Service name', '10', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
*clip*clip*clip*
We can uninstall service first by following Strategy 2, but then we lose transactional support.
So, Simon did I encourage you to change your code a bit?:)
And, btw, if you don't want to change the strategy, please don't rely on SequenceID in MSI table, it can be change, you have to get the at the runtime.
Hope it will help to everybody!
See also more advanced explanation of how MSI works
here.
Truly yours, Marat

How to deal with credentials for external applications using a Java Client/

Hi Guys,
This is the case. I am integrating an external application with an ADF Application. I have implemented some programmatic ViewObjects that are being filled up by a REST Java Client Wrapper. Everything is working fine but the issue is that the credentials the wrapper is using are hard coded inside the java class. I am thinking to ask for the credentials at the beginning of my taskflow and then store them somewhere and use them then to create my client wrapper (passing them in the constructor).
However, I don't know if my approach is good and I would like you to share your experiences or how to deal with this.
Regards

You can use Credential Store Framework to store the credentials securely in the weblogic server instead of hardcoding in the java class.
The Credential Store Framework:
- enables you to manage credentials securely
- provides an API for storage, retrieval, and maintenance of credentials in different back-end repositories
Check the documentation on CSF API -
http://docs.oracle.com/cd/E29505_01/core.1111/e10043/devcsf.htm
Major Steps -
1. Create a credential map and key in em console to store the password (http://docs.oracle.com/cd/E25054_01/core.1111/e10043/csfadmin.htm)
2. Use CSF API to retrieve the stored password
3. In jazn-data.xml give permissions to access CSF key and map

How to deal with payment of vendor to us (credit notes I guess)

Normally I use F07 for outgoing payments, it's linked to vendors, but how to deal with incoming payments of vendors?
We got paid two invoices(credit notes I guess) and I want to put them under the right vendor, but how do I do it?
I can't use F07 I think because I need to use positive amounts (for normal purchase invoices) and can't use negative amounts in this transaction. F08 is for ingoing payment but that session is linked to customers I thought..not for vendors?
How to deal with this kind ot transactions? What transaction can I use the best for payments like this
(we got paid an amount , no invoices yet, but I know the vendor).

whith F-02 it is possible I noticed.

How to deal with file(for example .xml)? what format of dir should be?

I'd like to operate the file in disk, and want to use relative directory?
How to deal with file dir? what format of dir should be?

Hi Kamlesh,
Thanks for your response.
Actually, In the "Process External Bank Statement" window, i see that there are few entries which is for the previous year and which has not been reconciled. I have never worked practically on BRS and hence, i am scared to make any changes in the clients database without being confident on what i am doing. I need to reconcile for one of their Bank a/c for the month of April '08. I have the copy of the statements for the month ending 31st Mar 08 and 30th Apr 08. The closing balances are as below:
31/03/08 - 2300000.00
30/04/08 - 3100000.00
Now my OB for Bank a/c for April '08 in SAP is 2300000.00 Dr.
When i go to External Bank Reconciliation - Selection Criteria Screen (Manual Reconciliation), here are the detail that i enter:
Last Balance: INR -7,000,000.00000 (Grayed out by the system)
Ending Balance: INR -3,100,000.00000 (Entered by me)
End Date: 30/04/08 (Entered by me)
"Reconciliation Bank Statement" Screen opens up and shows the below balances in the screen:
Cleared Book Balance: INR -7,000,000.00000
Statement Ending Balance: INR -3,100,000.00000
Difference: INR 3,800,000.00000
As per the Bank statement, i have found all the transactions listed out here for the month of Apr '08 but, i also found that the open transactions for the previous month from April '08 have been lying in "Process External Bank Statement" window.
Could you please help me solve my issue as to what needs to be done or could you also get me some links from where i can get few documents for processing External Bank Reconciliations?
That will be of a great help for me. I need steps as to what needs to be done first and then the next so that i can arrive at the correct closing balance for the month April '08.
Thanks in Advance....
Regards,
Kaushal

Organizational unit transfers ,how to deal with the person in it ?

Hi,All,I need your help!
if an organizational unit has been transfered to another upper organizational unit ,and there are already persons assigned to different positions of it,so how to deal with this problem?are those person's IT 0000,0001should be changed too?and how to maintain this kind of change?is a personnel action necessary?or there is some other more efficient way for it?

Hi
In IT0001 You have a Position which is linked to a Org unit. If you want to change the org units reporting relationship then you have to change it in OM by creating a new relationship with the upper org unit.
All the person are assigned to position so nothing needs to be done in PA.
Reward points if useful.
Regards

IMac SSD full - how to deal with the two drives

Greetings all,
I've been using an iMac i7 with two drives SSC and HDD. Recently, I've been having issues with the SSD being close to full. I use it for applications only, although some apps need lots of space (iTunes, iMovie, Photoshop, etc.) I use Lightroom and have all the images on the spinning drive. Does anyone know how to deal with this issue? Any way I can move the music from iTunes to the separate drive, or any way to figure out what exactly is using most of my space?
Thanks in advance for your help.
erlkonig

Here's some utilities for analyzing disk space:
DiskInventory
GrandPerspective
OmniDiskSweeper
WhatSize
You might want to consider putting your home directory on the HDD.
How to Move the Home Folder in OS X – and Why
Moving your home folder in OS X

How to deal with the barcode?

i'm developing a file storage system in java, there're two barcode on each file(one is pdf417, the other one is code128) , but now ,there's a problem confused me :
i use the barcode scanner to scan the file and get images of these files from the scanner , but i have no idea how to deal with these images,
i need the barcode information on the images, and i know there're some java components can help me to read the barcode from images , for example : BarcodeReader from Barcode Library, but these components were too expensive for me , is there any other way can solve this problem?

yes, look for a cheaper component...
Or write your own...
Or save up until you can afford the more expensive ones...

How to automount with polkit in kde 4.4

Similar Messages

Maybe you are looking for