How to avoid dock while certain apps runnin?

heya,
while using logic, i have to move the mouse to the edges of the screen for certain tasks which almost invariably brings up the dock. can i disable the dock completely while certain apps r runnin, then jus comm-tab to the finder if i need to use it?
thanx, roofraider

If you're not going down ALL the way to the bottom of the screen, the dock won't turn up.
Also, you might temporarily move the dock to the left or right side of the screen, while you're working with logic. Check in dock preferences, or drag with shift click on either side you want.

Similar Messages

  • How do i install just certain apps from master collection

    I have a smaller harddrive and need to preserve room on it so I want to only install the applications that are included in adobes design premium for right now, I know I can click manual to choose the apps I want to install, however underneath the applications list there is a huge list of other addons and content. Im not sure which of that in attributed to the apps I want to install and I dont want to install it all fearing that im gonna have content that is useless to me because i am only installing certain apps.
    My question is what out of the list of add-ons and content do I need to install for only design premium application (acrobat, dreamweaver, photoshop, indesign, illustrator , flash, fireworks, Bridge, device central, version cue)
    If anyone knows how to answer that then you are the man!

    I have a tiBook/G4 800MHz with just 1 Gig of memory that I keep in the living room so I can watch television and still do some types of work--the types that don't require the same degree of concentration as my real work that I do in the office.
    So, there's a case where I might want to install a subset of a suite on my upstairs machine while installing the whole suite on a downstairs machine.
    Really guys, when someone asks a question about whether or not something is possible, do we really have to question their motives/sanity rather than answer the question to the best of our ability?
    Having said that, I don't know the answer. I would hope that if you select a subset of the applications you'd automatically get all the necessary support software for those applications without having to worry. But some of those items lower down the list are a tad hard to fathom.
    Perhaps a good strategy is to start by installing the minimum you think you need and let experience guide you if you realize you need more. You can always add the other items later.
    You don't say how small your drive is nor how much will be free after the install. I'd be hesitant to run the suite with a primary hard drive that had less than 25% or 10 Gigs (whichever is the larger) of free space on it.
    Dave

  • How to avoid error while install oracle developer suite10g(forms & reports)

    hi dear all in recent times i am trying to install oracle developer suite 10g to learn forms and reports in my lap having windows 7 ultimate version ,32 bit,2.56 GB of ram .I downloaded two files ds_windows_x86_101202_disk1 and ds_window_x86_101202_disk2 and i downloaded Oracle universal Installer but i am unable to complete installation process ,When i click on complete(1.11gb) version which include forms,reports,xml,j developer I am facing this type of error message
    "Install has encountered an error while attempting to verify your virtual settings.please verify that the sum of the initial sizes of the paging files is at least 256 mb"
    Could any one help how to avoid this type of error message ? or else is there any other way to download Oracle forms and reports version

    Ok, Oracle Developer Suite (ODS) 10g (Forms/Reports) was not designed for Windows 7. In order to the ODS you must follow these steps for the installation to be successful.
    1. You must set the Virtual Memory (VM) size. The Oracle installer can not read Windows Managed VM. See the Microsoft article Change the size of virtual memory for more information on setting the VM size.
    2. The Oracle Installer does not recognize the internal version number of Windows 7, so you have to set the compatibility mode on the Setup.exe to Windows XP. Right-Click the SETUP.EXE and select properties. Then click the Compatibility Tab and in the Compatibility Mode area set this to "Run this program in compatibility mode" and select "Windows XP SP3".
    3. You must run the ODS setup.exe as the Administrator. Right-click the setup.exe and select "Run as Administrator".
    Having done these three steps, your installation should be successful.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • How to avoid replication of certain transaction types

    Hi all,
      Contract is created in the R/3 system of transaction type Z111. This transaction type is not created in CRM in the SPRO(customer relationship management -> Transactions ->basic settings -> Define transaction types). This means documents of this transaction type cannot be created in CRM or documents created in R/3 should not be replicated to CRM.
    How to avoid the documents created in R/3 of transaction type Z111 from being replicated to R/3. Should some settings be done in transaction "FIBF" in R/3???
    Any idea.
    Thanks in advance
    Jothi

    Hi Gun,
      Thanks for the answer. In salescontract (Tcode R3AC1) the following filter condition is defined.
    Table - vbak
    field -auart
    Value - z910
    Incl/Excl - inclusive defined set/array
    But the value z900 is not specifed. The Bus_trans_msg which gets replicated into CRM is of type z900.
    Hence any idea.
    Can an additional filter be added saying as follows to prevent replication of Z900 like this.
    Table - vbak
    field -auart
    value - z900
    Incl/Excl - space
    Will this solve the problem.
    Best regards
    Jothi

  • How to avoid error while calling jsp file?

    hello,
    how to avoid the following error?
    i am using jdevloper for devloping jsp applications.
    after that i am calling the jsp page using tomcat4.0 ,i followed the steps according docs by jdev team,
    i am getting the following error how to solve this,
    can one help?
    =============================
    type Exception report
    message Internal Server Error
    description The server encountered an internal error (Internal Server Error) that prevented it from fulfilling this request.
    exception
    org.apache.jasper.compiler.CompileException: /AccountView_Browse.jsp(4,0) Unable to load class oracle.jbo.html.jsp.datatags.ApplicationModuleTag
         at org.apache.jasper.compiler.TagBeginGenerator.init(TagBeginGenerator.java:139)
         at org.apache.jasper.compiler.JspParseEventListener$GeneratorWrapper.init(JspParseEventListener.java:829)
         at org.apache.jasper.compiler.JspParseEventListener.addGenerator(JspParseEventListener.java:153)
         at org.apache.jasper.compiler.JspParseEventListener.handleTagBegin(JspParseEventListener.java:1039)
         at org.apache.jasper.compiler.DelegatingListener.handleTagBegin(DelegatingListener.java:221)
         at org.apache.jasper.compiler.DelegatingListener.handleTagBegin(DelegatingListener.java:216)
         at org.apache.jasper.compiler.Parser$Tag.accept(Parser.java:852)
         at org.apache.jasper.compiler.Parser.parse(Parser.java:1145)
         at org.apache.jasper.compiler.Parser.parse(Parser.java:1103)
         at org.apache.jasper.compiler.Parser.parse(Parser.java:1099)
         at org.apache.jasper.compiler.ParserController.parse(ParserController.java:214)
         at org.apache.jasper.compiler.Compiler.compile(Compiler.java:210)
         at org.apache.jasper.servlet.JspServlet.loadJSP(JspServlet.java:548)
         at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadIfNecessary(JspServlet.java:176)
         at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:188)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:381)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:473)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
         at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
         at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
         at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
         at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
         at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1027)
         at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1125)
         at java.lang.Thread.run(Thread.java:536)
    ====================
    thanks
    pullareddy

    Ok, Oracle Developer Suite (ODS) 10g (Forms/Reports) was not designed for Windows 7. In order to the ODS you must follow these steps for the installation to be successful.
    1. You must set the Virtual Memory (VM) size. The Oracle installer can not read Windows Managed VM. See the Microsoft article Change the size of virtual memory for more information on setting the VM size.
    2. The Oracle Installer does not recognize the internal version number of Windows 7, so you have to set the compatibility mode on the Setup.exe to Windows XP. Right-Click the SETUP.EXE and select properties. Then click the Compatibility Tab and in the Compatibility Mode area set this to "Run this program in compatibility mode" and select "Windows XP SP3".
    3. You must run the ODS setup.exe as the Administrator. Right-click the setup.exe and select "Run as Administrator".
    Having done these three steps, your installation should be successful.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • How can I sync only certain apps after a restore instead of all of them?

    I've been serisouly frustrated with iTunes trying to find a way to sync only the apps I want to sync. But iTunes insists that I sync every single app I have downloaded in the past to my phone and I don't want all of them on there. Now after restoring I have a bunch of apps on my phone waiting to sync and now have to either restore again or individually delete all 155 of them. Are there certain settings I'm missing here?  Please help!!

    Thanks for the help I did not receive
    Hey, glad I didn't help.
    I mean, you waited a whole 38 minutes for someone to volunteer their assistance.
    FYI:
    Select the iPhone in iTunes.
    Click the Apps tab.
    Click Sync apps and tick the apps you want to sync.
    Click Apply at bottom.
    You're welcome.
    After literally digging for forever.
    Something less than 38 minutes is forever? (time it took to post first question, find answer, get upset and post 2nd time).
    Oh, and thanks for posting how you resolved the issue so others (who may not get an immediate reply) will know how to solve a similar issue without getting upset.

  • How to avoid postback while filter document library using metadata navigation filters?

    Hi All,
             Please help me with this scenario. I have a document library with metadata columns and normal columns and have enabled metadata navigation settings and key filters.
            It filters fine. But only problem every time i click the whole page will refresh. is there any way we can avoid page refresh while filtering.
    Or
    Any alternative solutions also much appreciated.
    Thanks for your help in advance.

    You're not going to be able to avoid that post back. The pages haven't been designed to allow AJAX behaviour and trying to re-build them would be a monster for MS let alone for you.

  • How to avoid validation while navigating to the next train station..11g u2

    Hi,
    I have a case where I use the same view object across the train stations while entering the data.
    My problem is, when I click the Next button it gives an error saying that I am missing some of the mandatory fields that are exposed in the coming screens.
    To make it more clear..
    Say that I have an employee vo having (*id , name, surname, department, salary ..)
    I create a train taskflow and create two page fragments one for entering id, name, surname and the second one is for department and salary.
    When I try to navigate to the next train station after entering fields in the first one I get an error saying that "salary is missing" .
    What should I do to postpone the model validation until I commit something?
    Thanks

    try using postback to avoid validation again...
            Boolean l_postBackValue = (Boolean)JSFUtils.resolveExpression("#{adfFacesContext.postback}");
            Boolean l_defaultBooleanValue = new Boolean("false");
            if (l_postBackValue.equals(l_defaultBooleanValue)) {
            }

  • Disabling while certain apps are running

    Apologies if this has been asked before and answered, but I can't find it anywhere.
    Is there any way (other than manually turning time machine off in the sys prefs) to get time machine not to do backups when a certain application is running? There are obviously some applications (direct-to-disk audio, games etc) which don't appreciate having time-machine suddenly grinding into action while they are running, and I'm wondering whether there is a script or something to persuade time-machine to do a check of running applications before starting its business.
    Actually, now that I think about it, the same sort of functionality could be handy for Spotlight and .Mac Sync too....

    TM is designed as a low priority task and should stand aside when user-level resources are being demanded. If you are sure TM is not acting this way you should report this to Apple Feedback and give as much supporting evidence as possible.

  • HOW TO AVOID DUPLICATES WHILE USING VRM FM

    HI EXPERTS,
                      I AM USING VRM FM TO PASS VALUES INTO LISTBOX IN SCREENS.FIRST TIME IT IS WORKING PROPERLY WHEN I USE IT FOR THE SECOND TIME IT IS SHOWING THE PREVIOUS DATAS ENTRIES ALSO .HOW TO DELETE THE DUPLICATE ENTRIES OF IT .
    THIS IS MY CODE.
    when 'ENTER'.
          select POSNR ARKTX from LIPS into corresponding fields of table i_pstyp WHERE VBELN EQ VBELN.
          LOOP AT I_PSTYP .
            W_DDLIST-KEY = I_PSTYP-POSNR.
            W_DDLIST-TEXT = I_PSTYP-POSNR.
    APPEND W_DDLIST TO POSNR1.
    CLEAR W_DDLIST.
    CALL FUNCTION 'VRM_SET_VALUES'
            EXPORTING
              ID              = 'POSNR'
              VALUES          = POSNR1.
    IN THIS IF I SELECT NEXT VBELN WITHOUT EXITING FROM THE SCREEN THE PREVIOUS VBELN'S LINE ITEMS ALSO ARE DISPLAYING .WHAT SHALL I DO .
    MANI

    when 'ENTER'.
    select POSNR ARKTX from LIPS
           into corresponding fields of table i_pstyp
           WHERE VBELN EQ VBELN.
    LOOP AT I_PSTYP .
    W_DDLIST-KEY = I_PSTYP-POSNR.
    W_DDLIST-TEXT = I_PSTYP-POSNR.
    APPEND W_DDLIST TO POSNR1.
    CLEAR W_DDLIST.
    ENDLOOP. " Endloop here. the FM should not be called inside the loop
    CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
    ID = 'POSNR' " hope you are using the fieldname correctly
    VALUES = POSNR1.
    CLEAR : POSNR1. " this will stop repeating the values in your drop down list
    Regards
    Gopi

  • How to avoid "DBIF_RSQL_SQL_ERROR" while updating data to a ztable?

    Hi Friends,
    I am in urgent need of solution to reduce or come out DBIF_RSQL_SQL_ERROR at time of updating a Z table.
    the code are below mentioned.
    There is no inconsistency b/w table and internal table strcture.I also used commit work.Buat everthing is fail.
    "ORA-01438:
    11020   *LOGIC FOR CLAERING PREVIOUS RELEATED DATA IN TABLE
    11030     LOOP AT WA.
    11040       DELETE FROM YMATPRICNG WHERE WERKS = WA-WERKS.
    11050   *                         AND MATNR = WA-MATNR
    11060   *                         AND MAKTX = WA-MAKTX.
    11070   *                         AND V_BPMNG = WA-V_BPMNG
    11080   *                         AND V_BAMNG = WA-V_BAMNG
    11090   *                         AND V_INCREASE = WA-V_INCREAS
    11100   *                         AND V_DECREASE = WA-V_DECREAS
    11110   *                         AND INCREASE1 = WA-INCREASE1
    11120   *                         AND DECREASE1 = WA-DECREASE1
    11130   *                         AND NET = WA-NET.
    11140   COMMIT WORK.
    11150     ENDLOOP.
        >     MODIFY YMATPRICNG FROM TABLE WA.
    11170     COMMIT WORK.
    Please suggest me as soon as possible.

    Hi,
    I am deleting the first record which are already existing b'z I want only latest value update corresponding plant and material.
    And I had declared WA as a internal table type of ymatpricng table only.And again If put up few record to selection screen via material no,It update successfully.
    Only thing is that why it get cancelled with thsi dump showing that nametab and abap/4 is not consistent or buffer is out of time.
    The problem has arisen because, within the database interface,
    one of the data buffers made available for the INSERT (UPDATE)
    is longer than the maximum defined in the database.
    On the other hand, it may be that the length in the NAMETAB
    does not match the maximum length defined in the database.
    (In this case, the length in the NAMETAB is longer.)
    Regards
    Ricky

  • I used to be able to sync only certain apps but now there is no tick box to select which ones how do I do this now

    Hi
    The tick box seems to have disappeared from Apps when syncing - just bought a new ipad mini and don't want all my apps on it but without the tick box I'm not sure how to select only the ones I want.  Can anyone tell me how I now select only certain apps.

    Hey Maggiely,
    Thanks for the question. The following article may have the answer to your question:
    iTunes 11 for Mac: Add apps to iPod touch, iPhone, or iPad
    http://support.apple.com/kb/PH12115
    Select Sync Apps, and click Install next to the apps you want to sync. If you have iOS 3.1 or later, you can also do the following:
    - Drag apps from the list on the left to the Home screen on the right.
    - Arrange your device’s Home screens by dragging app icons to where you want them to appear.
    Thanks,
    Matt M.

  • Finder cannot launch or close applications after certain apps ...

    have been running for a while. I've found this problem with Skype and Parallels Desktop but there may be other apps as well. Seems like a memory leak but can't tell. Once the problem occurs no apps can be launched from the Dock, and certain apps cannot be Quitted (even with a Force Quit. Eventually even Finder becomes unresponsive and a hard reset is required.
    I tend to agree with the people who feel that Leopard was "not ready for prime time" and I am disappointed that I "upgraded". I have two other Macs that will not be upgraded until Leopard is stabilized. Having to reboot every couple of hours is not behavior I expect from OS X.

    I have the exact same problem. I too wish I didn't upgrade. Did they even test this? It happens on both macs. It happens to every app at every day for me.

  • How to make dock disappear for certain apps?

    Is there a way to make my dock disappear, but only when a certain app is open? I work with Photoshop, on my 13" Macbook Pro, and to be honest, I need every tiny bit of screen space I can muster. I'd like it if Photoshop ran full screen, like iTunes for example, but it doesn't run fullscreen AND show the side palletes etc, I don't know why but I wish it did.
    Anyway, I was wondering, can I program my dock somehow, so that it will disappear whenever I click inside or open Photoshop, but when I quit or click out of Photoshop, it comes back?
    Is there a line of code I need to put into Terminal, or a 3rd party app or something? Anything will do
    Thanks

    Hello ThatSmartKidJack,
    You can set you dock to automatically go down and come back. and if you still see the sides of your desktop just resize your window by dragging the bottom right corner of your window. I also use Photoshop and I can see it almost full screen by hiding my dock. Hope that helps!

  • How to deactivate asking for age while downloading app

    Hello,
    I'm frustrated as each time I download an app, iTunes ask me to confirm that I am 17 y.o.
    I already give my age when I install the iPhone, and I don't activate the parental control...
    Well... What else ?!!! (as somebody well knowne say's;-)
    My problem is, that I am reinstalling ALL MY APP(a lot!!!) and I don't want to stay
    in front of my screen all night waiting to clic on ''OK'' ! Wich bloc ALL the downloading until
    it's done by the way !
    How to deactivate asking for age while downloading app PLEASE ?!
    Thank you
    MARDO83... From France... Grand Pa' with a iPhone 3GS...

    There is no way to deactivate the functionality.  It is specific to certain apps that are being installed.  If you do not like it, do not install those apps or find a different device.

Maybe you are looking for