How to avoid duplicate displaying a chart in a list

I am displaying a chart in a list. Most of them work fine but I have one or 2 recordset displaying split duplicate charts in the list. how do I combine this into
one or eliminate duplicate charts

Hi Giss68,
Per my understanding you have put the chart in the list and group by an field(Id), but preview you got duplicate charts, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you got the duplicate record based on the group by field (Id), I recommend you to modify the query in the dataset to remove the duplicate record in the execution
result, details information below for your reference:
I assumed that you have an field (Id) which the list group on and another three columns which add to the chart:Value,Category group and Series Group(Col1,Col2,Col3), then you can modify the query reference to below sql to remove the duplicate record:
select Col1,Col2,Col3 ,max(Id) as Id
from TableName
Group by Col1,Col2,Col3
order by 1
Preview you will find the duplicate record (Col1,Col2,Col3) not display in the chart now.
If your problem still exists, please try to provide sample code of the table and the which field the list group on.
Any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Similar Messages

How to avoid duplicate posting of noted items for advance payment requests?

How to avoid duplicate posting of noted items for advace payments request?

Puttasiddappa,
In the PS module, we allow the deletion of a component pruchase requisition allthough a purchase order exists. The system will send message CN707 "A purchase order already exists for purchase requisition &" as an Iinformation message by design to allow flexible project management.
If you, however, desire the message CN707 to be of type E you have to
modify the standard coding. Doing so, using SE91, you can invoke the
where-used-list of message 707 in message class CN, and to change the
i707(cn)
to
e707(cn)
where desired.
Also, user exit CNEX0039 provides the possibility to reject the
deletion of a component according to customers needs e. g. you may
check here whether a purchase order exists and reject the deletion.
Hope this helps!
Best regards
Martina Modolell

How to avoid duplicates values from alvgird see below code

how to avoid duplicates values from alvgird see below code
in below query docno no is repeated again and again
how i can avoid duplication in this query.
select * into corresponding fields of table itab
 from J_1IEXCHDR
 inner join J_1IEXCDTL
 on J_1IEXCDTLlifnr = J_1IEXCHDRlifnr
 where J_1IEXCHDr~status = 'P'.

Hi Laxman,
after that select statement
select * into corresponding fields of table itab
from J_1IEXCHDR
inner join J_1IEXCDTL
on J_1IEXCDTLlifnr = J_1IEXCHDRlifnr
where J_1IEXCHDr~status = 'P'.
if sy-subrc = 0.
delete adjucent duplicates from itab comparing <field name of itab internal table>
endif.
this will delete your duplicate entries.once you done with this call the alv FM.
 call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 i_callback_program = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'IT_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
 i_grid_title = 'Purchase Order Details'
I_GRID_SETTINGS = I_GRID_SETTINGS
 is_layout = wa_layout
 it_fieldcat = it_fieldcat
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
 it_sort = it_sort
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
 it_events = it_event
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
IT_HYPERLINK = IT_HYPERLINK
IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
 tables
 t_outtab = ITAB
exceptions
 program_error = 1
 others = 2
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Thanks
Vikranth Khimavath

How to avoid Duplicate Records while joining two tables

Hi,
I am trying to join three tables, basically two tables are same one is like history table, so I wrote a query like
select
e.id,
e.seqNo,
e.name,
d.resDate,
d.details
from employees e,
((select * from dept)union(select * from dept_hist)) d
join on d.id=e.id and e.seqno=d.seqno
but this returing duplicate records.
Could anyone please tell me how to avoid duplicate records of this query.

Actually it is like if the record is processed it will be moved to hist table, so both table will not have same records and I need the record from both the tables so i have done the union of both the tables, so d will have the union of both records.
But I am getting duplicate records if even I am distinct.

How to avoid duplicate data while inserting from sample.dat file to table

Hi Guys,
We have issue with duplicate data in flat file while loading data from sample.dat file to table. How to avoid duplicate data in control file.
Can any one help me on this.
Thanks in advance!
Regards,
LKR

No, a control file will not remove duplicate data.
You would be better to use an external table and then remove duplicate data using SQL as you query the data to insert it to your destination table.

How to avoid duplicate record in a file to file

Hi Guys,
          Could you please provide a soultion
          in order to avoid duplicate entries in a flat file based on key field.
          i request in terms of standard functions
         either at message mappingf level or by configuring the file adapter.
warm regards
mahesh.

hi mahesh,
write module processor for checking the duplicate record in file adapter
or
With a JAVA/ABAP mapping u can eliminate the duplicate records
and check this links
Re: How to Handle this "Duplicate Records"
Duplicate records
Ignoring Duplicate Records--urgent
Re: Duplicate records frequently occurred
Re: Reg ODS JUNK DATA
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
regards
srinivas

How to avoid duplicates for an result set

how to avoid the duplicate rows for the below query
SELECT to_char(grecode (titleid)) gre_code, to_char(toeflcode (titleid)) toefl_code,titleid
          FROM (SELECT DISTINCT TO_CHAR
                                   (UPPER (TRIM (get_clob_value (table_name,
                                                                 KEY
                                   ) RESULT,
                                titleid
                           FROM mcp_specifications a JOIN mcp_title_specifications b
                                ON a.specificationid = b.specificationid
                                JOIN mcp_titles c ON b.titleid = c.titleid
                          WHERE b.is_parent = 'F'
                            AND UPPER (TRIM (c.university_state)) =
                                                          UPPER (TRIM ('USA'))
                            AND TO_CHAR (get_clob_value (table_name, KEY)) IS NOT NULL
                            AND UPPER (TRIM (SPECIFICATION)) IN
                                                   (UPPER (TRIM ('program'))))
         WHERE UPPER (TRIM (RESULT)) = UPPER (TRIM ('COMPUTER SCIENCE'))
      ORDER BY RESULT ASC;the output of the query would be
gre_code    toefl_code   titleid
402             78             5518
402             78             5519
402             78             5520
402             78             5521the output should be
402 78 any titleid

Some simplified code:
SELECT grecode(titleid) gre_code,
       toeflcode(titleid) toefl_code,
       min(titleid) titleid
FROM   (SELECT DISTINCT TO_CHAR(UPPER(TRIM(get_clob_value(table_name,KEY)))) RESULT,
               titleid
        FROM   mcp_specifications a
               JOIN mcp_title_specifications b
                    ON a.specificationid = b.specificationid
               JOIN mcp_titles c
                    ON b.titleid = c.titleid
        WHERE b.is_parent = 'F'
        AND    UPPER(TRIM(c.university_state)) = 'USA'
        AND    TO_CHAR (get_clob_value (table_name, KEY)) IS NOT NULL
        AND    UPPER(TRIM(SPECIFICATION)) = 'PROGRAM')
WHERE UPPER(TRIM(RESULT)) = 'COMPUTER SCIENCE'
GROUP BY grecode(titleid),
         toeflcode(titleid)Please note that applying functions like UPPER and TRIM on a string literal can and should be avoided.
For example:
UPPER(TRIM('USA')) = 'USA'Why force the database to do both an UPPER and a TRIM on something that can just be represented in uppercase with no surrounding spaces? It's a waste of time.

How to avoid duplicates in export?

Hi
Is there any way to avoid duplicates when exporting from LR4/avoid exporting the same picture(to the same folder) again?
Kindly
Jan

Rob Cole wrote:
I stand corrected - thanks Jim .
I think I had forgotten this because of how I use publish services / collections.
All of my publish services have exactly one (smart) collection, which defines the photos to be published.
I don't create a multitude of publish collections in order to define an associated publish tree - the tree is defined by the source folders. I started this convention before Lr was a glimmer in Adobe's eyes (even before digital photography was invented). If I was inventing now from scratch I might do it differently, but this is one reason I get aggravated when some of the experts in this forum continually "forget" that the need to maintain a prescribed convention is sometimes an absolute requirement (or at least *highly* desirable), and Lr should be able to adapt to the convention - and not the other way around.
If I quit Lr today, I could still maintain published trees without Lr's publishing collections. If your scheme depends on publishing collections which have no visibility outside Lightroom (e.g. a multitude of hard drive publishing collections), then you'd be screwed (so to speak) if you wanted to migrate to another software for maintenance. Not only that, but if you rebuild your catalog, all such collections are lost (unless you know how to use plugins to preserve them). Even if your scheme depends on regular (non-publishing I mean, whether smart of not) collections, and you use jf's Collection Publisher to publish in matching hierarchy, you'd still be screwed when migrating, since those collections do not exist outside Lightroom.
Impact may vary of course, but I like to minimized dependence on a specific software if possible.
Folders exist regardless of which software you use to edit your photos. Put another way: collection hierarchies are proprietary, folder structure isn't.
So, although lots of people prefer jf's Collection Publisher (understandably), it's worth considering jf's Folder Publisher too, or my very own TreeSync Publisher.
Cheers,
Rob

How to avoid duplicate BOM Item Numbers?

Hello,
is there a way to avoid duplicate BOM Item Numbers (STPO-POSNR) within one BOM?
For Routings I could avoid duplicate Operation/Activity Numbers with transaction OP46 by setting T412-FLG_CHK = 'X' for Task List Check. Is there an aquivalent for BOMs?
Regards,
Helmut Gante

Hello,
is there a way to avoid duplicate BOM Item Numbers (STPO-POSNR) within one BOM?
For Routings I could avoid duplicate Operation/Activity Numbers with transaction OP46 by setting T412-FLG_CHK = 'X' for Task List Check. Is there an aquivalent for BOMs?
Regards,
Helmut Gante

How to avoid duplicates in CROSS JOIN Query

Hi,
I am using CROSS JOIN to get all the subset of a table col values as shown below:
PRODUCT (Col Header)
Bag
Plate
Biscuit
While doing cross join we will get as
Bag Bag
Bag Plate
Bag Biscuit
Plate Bag
Plate Plate
Plate Biscuit ..... like this
By placing where condition prod1 <> prod2 to avoid Bag Bag and Plate Plate values. So the output will be like below
Bag Plate
Bag Biscuit
Plate Bag
Plate Biscuit
Now "Bag Plate" and "Plage Bag" are same combination how to avoid these records. My expected result is
Bag Biscuit
Plate Biscuit
How to derive this ?
Sridhar

Hi,
This is the the solution that I found as fit to the OP question, but
Visakh16 already posted the same idea (assuming the names are unique) from the start and I don't think that anyone notice it!
Sridhar.DPM did
you check Visakh16's response
(the second response received)?!?
I will mark his response as an answer. If this is not what you need pls clarify and you can unmark it :-)
[Personal Site] [Blog] [Facebook]

How to make JComboBox display an item not in list?

hi,
i'd like a gui component which is basically a jcombobox that presents a list A,B,C,D.
The combobox is paired with another gui component which allows choosing sets of items. A etc.. represent preselected sets of items, so the user can click on A and a particular set would be selected.
My problem is what to have the JComboBox do when the user selects a set of items that is not in the preselected defaults list. It would be nice to have the JComboBox just say "Other" at the top or something, but I can't figure out a way of doing this without putting the String "Other" in the list of items..
does anyone have any idea of how to approach this? (I looked at making the JComboBox editable but this seems a little complicated?)
thanks,
asjf

Your best option and cleanest design is to have a
dummy data item in your list for "none of the above". thanks for the reply - this is what I'm doing at the moment. The problem is that I'm expecting testers to legitimately complain that selecting "None of the above" doesn't do anything, and doesn't really make sense ( it could make a random selection :o) )
i think i agree that adding functionality to do this "properly" is likely to be more work/pain than its worth..
Only an editable combobox can display something not in the list.this might help - if I could block mouse clicks to the editable area, and write to it programmatically but think this is probably quite difficult (?)
asjf

When syncing my calendar with my iMac how to I avoid duplicate display?

When syncing calendar entries between my ipod and iMac, duplicate entries show on the ipod. Duplication does not appear on the computer.

Maybe:
https://discussions.apple.com/message/20311989#20311989
Ths also may help
iCloud: Advanced Calendar and iCal troubleshooting

How to avoid duplicates in Iphoto 5?

I have IPhoto 5.0.4 with Leopard on a G4. When I attach my digital camera, all the photos from my camera upload. I keep some family pics on my camera all the time, so the same ones duplicate themselves every time I upload new photos. How can this be avoided? thanks

There is a way to do this.
If your camera mounts on the Desktop as an external device, then use iPhoto's File > Import to Library command. Navigate to the camera, preview the photos, select just the ones you want, and import directly into iPhoto.
If your camera does not mount on the Desktop, like most Canon models, you can place the camera card into a USB card reader. That will mount on the Desktop, and you can control your imports as described above. It also gives you the advantage of not having to worry about your camera's battery power during the import.
Regards.

How to avoid duplicate measures in reports due to case functions?

Hi,
If I create a report, using a dimension called insert_source_type where the next measure would be insert_source in the dimensions hirarchie, if I do not put any formula, when I become a report where i can drill down on insert_source_type and i get insert_source values.
If I use a function like (CASE "Ins Source"."Ins Source Type" WHEN 'OWS' THEN 'WEB' ELSE "Ins Source"."Ins Source Type" END) and change the label of insert_source_tpye to Channel Group instead, when
I drill down on Channel Group, it goes to insert_source_tpye and from there i can drill down to insert_source.
There is an insert_source_type too much!
How can be this avoided?
Thanks and Regards
Giuliano

hi mahesh,
write module processor for checking the duplicate record in file adapter
or
With a JAVA/ABAP mapping u can eliminate the duplicate records
and check this links
Re: How to Handle this "Duplicate Records"
Duplicate records
Ignoring Duplicate Records--urgent
Re: Duplicate records frequently occurred
Re: Reg ODS JUNK DATA
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
regards
srinivas

How to avoid "Cannot display source code at this location"?

This debugger message really annoys me. It seems to me that
sometimes when my program fails the debugger returns nice friendly
messages telling me exactly what line numebr an object is
undefined. This is great. But half the time I get message of this
nature.
at main_fla::MainTimeline/ot()
at main_fla::MainTimeline/buttMouseEvent()
Cannot display source code at this location.
Why does the debugger refuse to show the line number of the
code sometimes?
Is there acoding practice that one should use to avoid these
unhelpful debug messages?
It is very annoying when you have a 200 line function that
tells you that somehting is undefined SOMEWHERE in the function
without giving you a line number. Granted at least AS3 does
actually warn you....(unlike AS2) but I am constantly plagues by
these "Cannot display source code at this location" messages.
An anyone offer any explanation to why these messages dont
display line numebrs or how to code in a way that avoids them?
thanks

JLundan,
I want to thank you for responding to the thread I started on the forum at java.sun.com. Your solution to my problem of needing to print the code of the html pages that the file I included generates was just what I was looking for. However, I have some further questions to ask, if you don't mind. To clarify my task I should say that your rephrasing of the problem is accurate: "You wan't to display the contents of the HTML file that the web server produces in response of client's request?"
Yes, this is what I need to do, but also it needs to display the source code of that html file that the server produces in response to the client's request. Also, in this case, I am the client requesting that the server return some html file, and I'm not sure where the server is. But the webserver.java file that I shared on the forum is on my local machine. I was wondering if I could modify this webserver.java file at my home so that any html file the server returns to me would automatically display the source code. This is a school project of mine and I am stuck on this one thing here.
Further, where would I put the "foo.html" file so it can be written to?
FileOuputStream fos = new FileOutputStream("foo.html");
fos.write(bytes);
fos.close();
Thanks so much for your help. I look forward to your response, at your convenience.
Regards

How to avoid duplicate displaying a chart in a list

Similar Messages

Maybe you are looking for