How to avoid error while install oracle developer suite10g(forms & reports)

hi dear all in recent times i am trying to install oracle developer suite 10g to learn forms and reports in my lap having windows 7 ultimate version ,32 bit,2.56 GB of ram .I downloaded two files ds_windows_x86_101202_disk1 and ds_window_x86_101202_disk2 and i downloaded Oracle universal Installer but i am unable to complete installation process ,When i click on complete(1.11gb) version which include forms,reports,xml,j developer I am facing this type of error message
"Install has encountered an error while attempting to verify your virtual settings.please verify that the sum of the initial sizes of the paging files is at least 256 mb"
Could any one help how to avoid this type of error message ? or else is there any other way to download Oracle forms and reports version

Ok, Oracle Developer Suite (ODS) 10g (Forms/Reports) was not designed for Windows 7. In order to the ODS you must follow these steps for the installation to be successful.
1. You must set the Virtual Memory (VM) size. The Oracle installer can not read Windows Managed VM. See the Microsoft article Change the size of virtual memory for more information on setting the VM size.
2. The Oracle Installer does not recognize the internal version number of Windows 7, so you have to set the compatibility mode on the Setup.exe to Windows XP. Right-Click the SETUP.EXE and select properties. Then click the Compatibility Tab and in the Compatibility Mode area set this to "Run this program in compatibility mode" and select "Windows XP SP3".
3. You must run the ODS setup.exe as the Administrator. Right-click the setup.exe and select "Run as Administrator".
Having done these three steps, your installation should be successful.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Similar Messages

Getting an error while cofiguring Oracle 11g Portal, Forms, reports

Hello All,
I installed the jrockit, weblogic server 10.3.5 and forms 11g 1.1.1.2 and ran the patchset for 11.1.1.3 and I was able to complete those without any problems.
After that I started configuring and creating the domain I encountered the error OPMN start process failed. I tried to resume but it again failed at OPMN restart process.
Ultimately the configuration of the forms failed only because of the above two failures.
I used the following path to configure (Start -> All Programs -> Oracle Classic 11g – Home1 -> Configure Classic Instance) which will invoke configuration wizard.
I think if I can fix the problem with OPMN, I can complete the configuration without problems.
Also I would like to know whether I can follow the steps mentioned in the link (http://www.bea-weblogic.com/how-to-delete-a-weblogic-server-wls-domain.html) to remove the domain
since configuration is already failed.
Could somebody help to resolve this issue.
Thanks in Advance
Ram

Ram,
You didn't read the response in your other thread.
WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
John

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$

Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh.

Error while installing oracle 9i(9.2.0.1.0) on Red Hat Linux 8

hi
friends,
i'm getting error while installing Oracle 9i(9.2.0.1.0). this eror was came when linking process was going on. Error is as follow.
"Error in invoking target install of make file"
/home/oracle/product/9.2.0/plsql/lib/ins_plsql.mk"
/home/oracle/product/9.2.0/precomp/lib/ins_precomp.mk"
/home/oracle/product/9.2.0/sqlplus/lib/ins_sqlplus.mk"
/home/oracle/product/9.2.0/network/lib/ins_oemagent.mk"
pls. help me what to do?
Dharmesh

See this :
I saw this error only in connection with Oracle 9i (9.0.1) installation.
Edit the file $ORACLE_HOME/bin/genclntsh and change the following line (people have sent me emails pointing out that this also works for Mandrake 8.1 and Mandrake 8.2):
LD_SELF_CONTAINED="-z defs"
to read:
LD_SELF_CONTAINED=""
Then run the script $ORACLE_HOME/bin/genclntsh as the user "oracle" and not as the user "root". Also make sure you have all the Oracle environments set! (I got so many emails because people were not doing this)
$ su - oracle
$ $ORACLE_HOME/bin/genclntsh
Created /opt/oracle/product/9.0.1/lib/libclntst9.a
$
After that hit retry in the error popup. This always worked for me.
(I was told that this also works for SuSE 8.0.)
Here is Oracle's official solution for Oracle 9iR1 or 9iR1 iAS on RedHat 2.1 Advanced Server:
http://otn.oracle.com/software/products/oracle9i/files/binutils_readme.html
from: http://www.puschitz.com/OracleOnLinux.shtml
Hope it help you
Basem

Error while installing oracle 10g on AIX

I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl help

Hi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Error While Installing Oracle 9.2.0.1.0 on Win 2003 Server

Hi,
I am getting following error while installing Oracle 9.2.0.1.0 on Windos Server 2003-
ORA-12546: TNS: Permission Denied.
Above error pops-up during database configuration phase. Oracle docs says- "Acquire necessary privileges and try again." But I am installing as administrator.
Thanks in advance,
-Sandeep

I can't tell you why this error is occurring but you are installing a desupported version of the Oracle database that may well not be supported on your version of the o/s.
Check the support matrix and metalink and see if you can install a supported product such as 10.2.

Error while installing Oracle 10 g

Hi ,
I've got following error while installing Oracle 10g.
Exception java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key Name occurred..
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key Name
     at java.util.ResourceBundle.getObject(Unknown Source)
     at java.util.ResourceBundle.getString(Unknown Source)
     at oracle.sysman.oii.oiii.OiiiCompInvEntry.getName(OiiiCompInvEntry.java:1601)
     at oracle.sysman.oii.oiii.OiiiCompInvEntry.getName(OiiiCompInvEntry.java:1566)
please help

Windows 2000 SP4
Installer run successfully .
But it generates error log file when installation begins and abort the installation with the following message
Abnormal program termination
an internal error has occurred .
please check the following files
C:\Program Files\Oracle\Inventory\logs\oraInstall2004-05-31_02-57-32PM.err
C:\Program Files\Oracle\Inventory\logs\oraInstall2004-05-31_02-57-32PM.out

Error while installing oracle 11g in centos 5.3

I got this error while installing oracle 11g in my laptop with centos 5.3
the error is:
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 76430 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6000 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-03-07_12-09-48PM. Please wait ...[oracle@www database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
please help me solve this...i am new to linux so can anyone give me detailed instructions.i tried using the installation guide and even though i got this error...

Firstly Thank you everyone for giving me your suggestions.
I tried installing oracle 11g in centos using Tim's tutorial and i all went fine initially i got the oracle 11g installation GUI and i got an error while starting database configuration.
The error was : TNS failed
and i got two options in that dialog box "ignore" and "abort"
after press ignore a few times.the installation finished successfully.
When i opened terminal and typed
sqlplus SYS as SYSDBA
it asked for password
when i gave the password again it showed the error TNS failed
kindly help me solve this.....

Error while installing oracle apps 11.5.10

Hi all,
I have got errors while installing oracle apps 11.5.10. I have configured all the system parameters.
Unable ti complete instance configuration
RW-50010 error script has returned an error 1
RW-50004 error code received when running external process
Please let me know the solution
Thanks
Manikandan

You would get better answers if you asked in the correct forum.
LCM: 11i Install/Upgrade
Also, it would help if you looked at the logs to find the errors.

Error while installing Oracle Utilities Application Framework..

Hi all,
I am getting this error while installing Oracle Utilities Application Framework.
101124:094356 <info> Execute: C:\Program Files (x86)\Java\jdk1.5.0_11\bin\java -cp C:\TEMP\Release-FW-V2.2.0_rmb\spl\versions\Releases\FW\Release-FW-V2.2.0_rmb\FW.V2.2.0\data\bin JarVersionValidator C:\Hibernate_3.2.7_Win_O\hibernate-3.2.7.ga\hibernate-3.2\hibernate3.jar Hibernate-Version 3.2.5.ga
101124:094357 <info> Hibernate jar file C:\Hibernate_3.2.7_Win_O\hibernate-3.2.7.ga\hibernate-3.2\hibernate3.jar does not exists or version not correct.
101124:094357 <info> See Supported Platform Document for more details
the Jar file available in the directory specified and version is also correct.
I am new to this, will anyone help me out.
Need your help.
Regards,
Siva

It would help if you provided osme basic information like what version you are installing, what operating system, 32 bit or 64 bit. We may like to help but we are not mind readers.
If you happen to be installing one of the latest versions of the framework (CC&B FW 2.2 SP 8) there is an issue.
You may have to start off with hibernate 3.2.5 then run the framework installation.
This may not do a full install but you may find that only 1 or patches have not been installed and the issue is that these require hibernate 3.2.7
So go back and install the hibernate 3.2.7 and change the environment variables to point to the new version.
Re-run the framework installer.
You may get errors in that the patches that did not previously install properly cannot be installed.
This is because they have entries in the etc/installed_fixes.txt file.
edit the etc/installed_fixes.txt file and delete the patches that will not install.
re-run the installer now and the rest of the patches should now install
The 2 offending patches may be 9384543 and 9080333.

Error on installing Oracle Developer Suite 10g (10.1.2.0.2)

I try to install:
Oracle Developer Suite 10g (10.1.2.0.2), and lick on the set up icon. Then
I get error message:
"Actuall checking SWAP space: 1440 MB availabe, 1535 MB required... Failed "
I don't understand what is meant, and how to fix it?
I have C:\ dirve free space 11.1GB, and G:\ drive free space 463 GB. I try to install the package in G: dirve. I use MS Window XP.
Thank you
Alex

Alex-
Increase your Windows paging file by going to Control Panel->System->Advanced(tab)->Performance Settings(button)->Advanced(tab)->Virtual Memory. Change the Initial size to be at least 1535MB.
Dan

Got an error while installing oracle 10gR2 on RHEL 4

Hi Everybody,
After running ./runInstaller while installing oracle 10gR2 on RHEL4 ,i got an error message showing below can anyone guide me how can i proceed furthur?
As Follows:-
[oracle@localhost database]$ ./runInstaller Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-10-29_09-37-34PM. Please wait ...[oracle@localhost database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
[oracle@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-10-29_09-37-54PM. Please wait ...[oracle@localhost database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)

Hi,
You got these errors because runInstaller can not start the GUI. There are 2 solutions, you can choose one:
1. logout Gnome/Kde, login as oracle user, and run runInstaller again.
2.open a new root terminal,
a) run "xhost +" as root.
b) run "su - oracle" switch to oracle
c) run "export DISPLAY=:0.0"
d) then run "./runInstaller" again.
cheers.
Ice

Error while installing Oracle 9i AS Portal

Hi all,
after installation of Oracle 9i Application Server version 1.0.2.2.2 on Windows 2000(NT based), while installing Oracle 9i AS Portal using Oracle 9iAS Configuration Assistant on AS, following error appears while entering SYS password and connect information(SYS password and connect information(athlon64_01:1521:ORCL) are correct). Origin oracle database 10g is running on separate PC(athlon64_01) in local network.
Error: The TNS names alias is not allowed for the
database connection.
Can anyone please tell me how to solve the problem.
Thanks
Best regards
Fahad Ejaz
email:[email protected]

Do you have a good reason to install this version of the application server? It is several years old.
Here you find the most recent version, Oracle Application Server 10g.
Peter

How to avoid error while install oracle developer suite10g(forms & reports)

Similar Messages

Maybe you are looking for