How to avoid launching Labview when invoking VI by Teststand

Hi, friends.
I'm a learner of teststand. I wrote some VIs by Labview. Now I want to invoke them in teststand environment. But when I run the sequence. Labview will be automatically launched. How to avoid launching Labview when I run the sequence?
Thanks.
Solved!
Go to Solution.

I'm not sure that I follow what you are saying.. But it sounds like when the VI is called, the LabVIEW development software is started and you want to avoid that.
If you create an executable or dll and call that from within TestStand, it should not call the development environment. You would need to have the LabVIEW run-time engine installed on the target PC.
It has been many years since I've used TestStand with LV, so my memory may not be accurate. I think the above had worked for me. However, it seems that I recall something about having the LV code in debug mode causing it to open the development environment.... but it's a distant memory. You're not using breakpoints where the LV VI is being called, are you?
R

Similar Messages

How to avoid authentication screen when invoking a process?

Hello!
I created a simple webservice in Workbench to generate a sequential ID for PDF forms.
It's working fine, but the form is open a Windows Security dialog asks for login and password to access the webservice.
As there are over sixty of these forms to be used by around 4,000 employees, this will be a major problem.
Question: is there a way of invoking the process and sending the authentication information when the form is opened and thus avoid this dialog entirely?
Thank you very much for any hints!
Marcos

Thank you Nith!
But... it did not work...
I set it to "No", stopped the service, started it back again. No good.
When I press the button on the form to invoke the service, the Windows authentication screen comes on.
What could be wrong?
Thank you!
Marcos

How to avoid the dialogue when converting from context menu

This is a follow-up to http://forums.adobe.com/message/2016146#443364 which was locked due to a bug.
i would like to know how i can avoid the 'save as' dialogue when using the context menu to convert a word file to pdf using windows XP/acrobat 8/word 2007.
so far, it always prompts me for the filename, which is annoying as it does not allow me to batch-convert several files and let the thing run its course.
the solution provided by Steve in the other thread does not work - even if the plugin from word does not propt for a filename, it still does when triggered from explorer/context menu.
so back to square one: how to avoid that dialogue when not opening word at all?
cheers, thanks for any help. michael

For a permanent change, START>PRINTERS>right click on Adobe PDF printer and select properties>General>Printing Preferences>Adobe PDF Settings. Under the settings tab, uncheck the box related to asking for a name. Pretty sure that is the location, but it may vary with version.

How to avoid data repetation when using select statements with innerjoin

how to avoid data repetation when using select statements with innerjoin.
thanks in advance,
satheesh

you can use a query like this...
SELECT DISTINCT
         frg~prc_group1                  "Product Group 1
         frg~prc_group2                  "Product Group 2
         frg~prc_group3                  "Product Group 3
         frg~prc_group4                  "Product Group 4
         frg~prc_group5                  "Product Group 5
         prc~product_id                  "Product ID
         txt~short_text                  "Product Description
UP TO 10 ROWS
INTO TABLE l_i_data
FROM
Joining CRMM_PR_SALESG and
COMM_PR_FRG_ROD
crmm_pr_salesg AS frg
INNER JOIN comm_pr_frg_rod AS prd
ON frgfrg_guid = prdfragment_guid
Joining COMM_PRODUCT and
COMM_PR_FRG_ROD
INNER JOIN comm_product AS prc
ON prdproduct_guid = prcproduct_guid
Joining COMM_PRSHTEXT and
COMM_PR_FRG_ROD
INNER JOIN comm_prshtext AS txt
ON prdproduct_guid = txtproduct_guid
WHERE frg~prc_group1 IN r_zprc_group1
   AND frg~prc_group2 IN r_zprc_group2
   AND frg~prc_group3 IN r_zprc_group3
   AND frg~prc_group4 IN r_zprc_group4
   AND frg~prc_group5 IN r_zprc_group5.
reward it it helps
Edited by: Apan Kumar Motilal on Jun 24, 2008 1:57 PM

How to avoid opening photos when connecting a camera

how can I avoid opening photos when connecting a camera?

Connect the Camera.
Launch Image Capture (in the Applications Folder)
You can set what happens when you connect this device in the lower left of the Image Capture window.

How to avoid safety warning when opening a pdf from an link in another pdf?

I make pdf in Acrobat with links to other pdf files av have made. When i try to click a link to open the pdf, i get the safety question if trust it or if i will block it. How to avoid that question all the time?

Hello Kvalitetetsansvarlig
Try adding the PDF to the trust location in Acrobat
Edit -> Preferences-> Security (Enhanced), Click on "Add File", and browse to your file.
Click on "OK" button and check.
Regards,
Deepak

How to avoid clear record when tab pages changes

Hi All
I am using oracle forms 10g and db 10g.
I have created a form with four tab pages. Namely "EXPENSE" , "AMOUNT_DETAILS", "SUPPLIER" , "ACCOUNT".
When i enter a data in page 1 ie Expense and move to next page page2 "AMOUNT_DETAILS", and enters data in page3 "SUPPLIER" and when i come back to page1 "EXPENSE" and also Page2 "AMOUNT" the data get cleared in Tab pages. There is no data again i need to enter the data manually.
Can any one suggest me how to avoid this clear data.
Thanks & Regards
Srikkanth

Hi,
Thanks once again for your quick response.
I have checked it , i was working with oracle apps.Now i have entered all the datas in the four tab and press save button in the screen at that time also the data get cleared.Can you please tell is there any work around for this.
regards
Srikkanth

How to avoid shared locks when validating foreign keys?

I have a table with a FK and I want to update a row in that table without being blocked by another transaction which is updating the parent row at the same time. Here is an example:
CREATE TABLE dbo.ParentTable
PARENT_ID int NOT NULL,
VALUE varchar(128) NULL,
CONSTRAINT PK_ParentTable PRIMARY KEY (PARENT_ID)
GO
CREATE TABLE dbo.ChildTable
CHILD_ID int NOT NULL,
PARENT_ID INT NULL,
VALUE varchar(128) NULL,
CONSTRAINT PK_ChildTable PRIMARY KEY (CHILD_ID),
CONSTRAINT FK_ChildTable__ParentTable FOREIGN KEY (PARENT_ID)
REFERENCES dbo.ParentTable (PARENT_ID)
GO
INSERT INTO ParentTable(PARENT_ID, VALUE)
VALUES (1, 'Some value');
INSERT INTO ChildTable(CHILD_ID, PARENT_ID, VALUE)
VALUES (1, 1, 'Some value');
GO
Now I have 2 transactions running at the same time:
The first transaction:
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;BEGIN TRAN
UPDATE ParentTable
SET VALUE = 'Test'
WHERE PARENT_ID = 1;
The second transaction:
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;BEGIN TRAN
UPDATE ChildTable
SET VALUE = 'Test',
PARENT_ID = 1
WHERE CHILD_ID = 1;
If 'UPDATE ParentTable' statement runs a bit earlier, then 'UPDATE ChildTable' statement is blocked untill the first transaction is committed or rollbacked. It happens because SQL Server acquires shared locks when validating foreign keys, even
if the transaction is using read uncommitted, read committed snapshot (read committed using row versioning) or snapshot isolation level. I cannot see why change in the ParentTable.VALUE should prevent me from updating ChildTable. Please note that ParentTable.PARENT_ID
is not changed by the first transaction, which means that from FK's point of view whatevere is set to the ParentTable.VALUE is never a problem for referential integrity. So, such blocking behavior seems to me not logical. Furthermore, it contradicts to the
MSDN:
Transactions running at the READ UNCOMMITTED level do not issue shared locks to prevent other transactions from modifying data read by the current transaction. READ UNCOMMITTED transactions are also not blocked by exclusive locks that would prevent the
current transaction from reading rows that have been modified but not committed by other transactions.
Does anybody know how to workaround the issue? In other words, are there any tricks to avoid shared locks when validating foreign keys? (Disabling FK is not an option.) Thank you.
Alexey

If you change the primary key of the parent table to be nonclustered, there is no blocking.
Indeed, when I update ParentTable.VALUE, then:
in case of PK_ParentTable is clustered, a particular row in the clustered index is locked (request_mode:X, resource_type: KEY)
in case of PK_ParentTable is non-clustered, a particular physical row in the heap is locked (request_mode:X, resource_type: RID).
and when I update ChildTable.PARENT_ID, then:
in case of PK_ParentTable is clustered, this index is used to verify referential integrity:
in case of PK_ParentTable is non-clustered, again this index is used to verify referential integrity, but this time it is not locked:
It is important to note that in both cases SQL Server acquires shared locks when validating foreign keys. The principal difference is that in case of clustered PK_ParentTable the request is blocked, while for non-clustered index it is granted.
Thank you, Erland for the idea and explanations.
The only thing that upsets me is that this solution cannot be applied, because I don't want to convert PK_ParentTable from clustered to non-clustered just to avoid blocking issues. It is a pity that SQL Server is not smart enough to realize that:
ParentTable.PARENT_ID is not changed and, as a result, should not be locked
ChildTable.PARENT_ID is not actually changed either (old value in my example is 1 and the new value is also 1) and, as a result, there is no need at all for validating the foreign key.
In fact, the problem I described is just a tip of the iceberg. The real challenge is that I have deadlocks because of the FK validation. In reality, the first transaction has an additional statement which updates ChildTable:
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
BEGIN TRAN
UPDATE ParentTable
SET VALUE = 'Test'
WHERE PARENT_ID = 1;
UPDATE ChildTable
SET VALUE = 'Test'
WHERE PARENT_ID = 1;
The result is famous message:
Msg 1205, Level 13, State 51, Line xx
Transaction (Process ID xx) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
I know that if I change the order of the two statements, it will solve the deadlock issue. But let's imagine I cannot do it. What are the other options?
Alexey

How to avoid the prompt when verifing signature?

I sign the doc with my cert.
The cert is not trusted by Acrobat/Reader itself so when i try to verify the signature Acrobat/Reader will prompt the user cert is not trusted.
My question is how to avoid this prompt through Acrobat SDK or how to add my cert to trusted cert list through Acrobat SDK?
Thanks.

Patrick Leckey wrote:
You will also see the BER Decoding error when you have a self-signed peer-to-peer cert in your Windows Cert Store, even if it is not the signature you are using to sign.
Start > Run > certmgr.msc
Look for any certs that have "peer-to-peer" in the Intended Purpose column
Remove that cert
Restart Acrobat
Give that a shot.
Patrick,I have not found the Intended purpose of cert names "peer-to-peer".
But I have just found the cert which will cause the signature failure.
The key is the cert can not be removed.
I'm very curious that why a cert has no relationship with the signature could cause the signature failure?
Is it a BUG of Acrobat/Adobe Reader?
If not how can i operate successfully?
Thanks.

How to avoid water damage when installing invisible shield

Just wondering what you have to do to avoid water damage when installing Zagg invisible shield? What precautions should I take so that I do not damage the iPhone when installing Zagg Invisible shield?
Thanks and I look forward to your replies.
...B

Hi BGmail,
I would stay away from invisible shield by zagg or similar products. I tried it, waste of £15, could have got myself a dock stand for my phone for that ****!! The problem with IS(invisible shield) is that the screen protector has a rubber feel which makes it annoying when swiping your finger on it + it's not scratch proof at all!! Mine scratched 2 days after the installation so badly that I had to remove it. The back it's hard to apply, does not cover everything you'd like to, also a dust trap that could get between tha film and the phone causing it to scratch, some people reporting the film going yellow after a while(on white iPhones).
What I think of IS: A poor american product heavily/aggressive advertised!! Mine is off, using a hard clear plastic shell and a good screen protector, might look bulky but it's safe, only using the shell while at work, the iPhone is pretty tough, don't forget.
Your choice... Good luck !!

How to avoid system slow when login first time everyday

if login system first time every day, it will be very slow for loading web application.
I think maybe it 's reload cache every night or by a certain perods of time.
how to avoid this situation. or set cache reload a time per week?
Thanks.

Terry,
I would confirm your application pools are set up as suggested in the install documentation. This should resolve your issue.
Thanks,
Drew

How to access Camera Raw when invoking CS5 from Lightroom 3?

When I invoke CS5 from Lightroom, my NEF files seem to load directly without giving me an opportunity to make adjustments in Camera Raw. If I open the same NEF file from windows Explorer, CS5 presents the Camera Raw adjustment page and I can make adjustments before proceeding.
How can I work around this?
BTW I know I can make camera raw adjustments in Lightroom and then open in CS5, however for an image that I know I will be using CS5 on anyway, I don't want to do anything at all in LR just go direct to CS5 but I can't do this if this bypasses my ability to make adjustments in camera raw!
I must be missing something here, can anyone point me in the right direction?
[I'm using Camera Raw 6.1, LR3, CS5 12.0.1 x64; Invoking CS5 from LR3 by right-click on image, Edit In > Edit in Adobe Photoshop CS5]

That workaround did work for me so thanks for the helpful reply!
If anyone else has other ways of making this work I'd like to hear about it.
Thanks,
Eric

How to avoid ModelLayer Update when validation fails in ValueChangeListener

Hi,
One of the requirement in my application is to avoid model layer update when a value is changed in a field and it is not a valid value according to business functionality. Scenario is explained below.
1. Screen has one field SSN no.
2. User enters 889787873 (According to functionality, SSN no. should not start with 8 or 9)
3. The moment user enters and does Tab out, Value change listener gets fired (AutoSubmit is set to true and value change listener is mapped to it)
4. I have a util method isValidSSN(int ssnNo) that gets the SSN no as input argument, validates it, returns true if it is valid otherwise false.
There can be many ways to achieve the above said functiontlity including the best way of keeping the validation at entity attribute level. But that is not what i am looking for. I am doing migration of desktop application and want to mimic the code as how as it is (According to client requirement).
Requirement behavior:
In value change listener, I should get the newly entered value (Not from ValueChangeEvent.getNewValue()), validate it. If it is valid, I should update the model. If not, I should not do model layer update call at all as i want to keep my transaction undirty, but show invalid SSN message to the user.
Requirement:
1. Get the new value inside valueChange listener. I don't want to use valueChangeEvent.getNewValue() because what i said as SSN is just an example but in our app, we use many data types including custom domain data types. So i cannot expect valuechangeEvent.getNewValue() always gives me the new value with proper data type. I also know i cannot use UiComponent.processUpdate(facesContext) to get the new value from VO attribute. Because calling processUpdate issues setAttribute call at model layer, which in turn makes the transaction dirty. So i need to access the newly entered value with proper data type in some other way.
2. If any itemChange logic fails, I should not update the model layer but directly comes to render response. I hope this is doable by calling FacesContext.renderResponse() API but need confirmation or any other way if i am wrong.
Thanks in Advance.
Raghu

Thanks to all for your responses. Regarding accessing of new value inside value change listener, I am sure ValueChangeEvent.getNewValue() is not going to give me the value with proper data type. I am not using immediate attribute anywhere but use custom domain data type with masking (i.e. Formatter Format). Also I use InputDate field. Always valueChangeEvent.getNewValue() gives me the string representation of the value but not with actual data type.
Question:
1. Is there any API, that gets the valueChangeEvent.getNewValue() and the UI components as parameters and return the data with proper data type?
2. I need to get the newly value with proper data type inside valueChangeListener. Is it achievable? If so, how?
Need your help.

How to avoid JMS validation when starting weblogic server

Hi All,
When starting up WebLogic server, it will validate JMS destinations one by one for deployed applications.
If I don't connect the VPN, then these JMS destinations are not reachable, and WebLogic Server will spend a lot of time to try connecting to these JMS destinations.
Thus it will take a lot of time to startup the WebLogic Server.
How can I disable JMS validation when starting weblogic server?
Thanks and Regards!

Hi Daniel,
By blank do you mean that the screen is black? Is it gray? Is it blue? The word "blank" is vague when trying to determine and isolate startup issues.

How to avoid ORA-3113 when selecting from XMLTYPE table

Hi,
If I register an XML-schema, Oracle automatically creates a table xxxxxx_tab of XMLTYPE. (I use Oracle 9.2.0.1)
When I do a DESCRIBE or a SELECT from this table I get the error: 'ORA-03113:
end-of-file on communication channel' and my connection is dropped.
I opened a TAR for this and Oracle says: 'It is an internal bug so cannot be viewed in metalink. This is fixed in release 10i.' (do they mean oracle DB rel 10i, or a new version of XDK?)
I saw an example in Oracle Magazine (Jan
2003) "Make XML Native and Relative" about Oracle 9i Rel 2 and XML. As you can see in codeListing 7, the author also does a select from such a
table (CD331_tab): Why doesn't he have any problems?
Is there a workaround for this bug? What's the purpose of being able to automatically upload XML-data to a registered schema if you can't do a select of the data?
Thank you!

It appears that the XML Schema is not entirely valid. Specifically, the definition of element "DeviceCategory" has two definitions of element "Audio" appearing within a <choice> model i.e. something like :
<element name="DeviceCategory">
<choice>
<sequence>
<element name="Audio">
</sequence>
<sequence>
<element name="Audio">
</sequence>
</choice>
This is disallowed by XML Schema spec per. the Unique Particle Attribution Constraint. The general idea is that a XML Schema describes a determinstic content model i.e. schema processor can always unambiguosly determine the matching declaration when it encounters an element. However that's not the case with the declaration above. On encoutering "Audio", it could match either the first or the second declaration of the element. Hence the error.
You will have to rework the schema to avoid this constraint. One mechanism could be to define complexType and their restrictions.
- Ravi

How to avoid launching Labview when invoking VI by Teststand

Similar Messages

Maybe you are looking for