How to avoid page break in row other that the option "Avoid page break"

Hi Experts
Is there any way to avoid a row to be broken or extended to other page. "Avoid page break" option can not be used as it creates a lots of white spaces.
Regards
Sourashree

If it is related to visibility you can choose Draft Mode or change the Page size.

Similar Messages

  • How do I set a fixed page size in Muse so that the window always stays the same size

    how do I set a fixed page size in Muse so that the window always stays the same size

    Hi Aish & thanks for responding;
    I would like the window size to stay the same for the entire site and not be
    able to scale to drag & scale it. ie 950 pixels x 500 pixels.
    Thanks,
    JB
    On 12/4/14 3:30 PM, "Aishvarya Raj Rastogi" <[email protected]>

  • Report.Services 2008 - get page-count or row-count in the c#-code

    hello
    is it possible to get from the ReportViewer-control / ServerReport the page-count or row-count after the
    reportViewerCheck.ServerReport.Refresh();
    statement ??
    many thanks in advance for any clue & regards
    Michael

    Hi Michael,
    Yes, you can get them. For row count, you can add a parameter to store the row count of your dataset in your report.
    Here are the steps:
    1.     Add 2 datasets in your report, one for report use and the other on is to row count use. For instance:
    DataSet1: SELECT     HumanResources.vEmployee.* FROM         HumanResources.vEmployee
    DataSet2: SELECT     COUNT(*) FROM         HumanResources.vEmployee
    2.     Add a parameter, set the parameter’s default value set to Get Values from a query and select DataSet2.
    Then, in your ASP.NET web application code you can use the following function to get the row count of the report:
    private int GetReportRowCount(ReportViewer report)
                return Convert.ToInt32(report.ServerReport.GetParameters()[0].Values[0].ToString());
    For page count, you can refer to the following code:
    private int GetReportPageCount(ReportViewer report)
                return report.ServerReport.GetTotalPages();
    You may not get the correct row count and page count in after executing Refresh () method, that’s because when you run this method, it will start another thread to refresh the report and the code below Refresh () method will not wait refreshing complete but run it. For instance, you may get the page count as o if you run the following code in the Button event:
    // Click this Button to refresh the ReportViewer1
            protected void btnGetPageCount_Click(object sender, EventArgs e)
                // Refresh the ReportViewer1
                this.ReportViewer1.ServerReport.Refresh();
                // Get ReportViewer1's page count and display in the txtPageCount TextBox
                this.txtPageCount.Text = this.ReportViewer1.ServerReport.GetTotalPages().ToString();
    You can run the refresh in separate events and get page count in another event, such as below code:
            // Click this Button to refresh the ReportViewer1
            protected void btnGetPageCount_Click(object sender, EventArgs e)
                // Refresh the ReportViewer1
                this.ReportViewer1.ServerReport.Refresh();
            // Display the txtPageCount's text to ReportViewer's page count
            protected void btnGetPageCount2_Click(object sender, EventArgs e)
                // Get ReportViewer1's page count and display in the txtPageCount TextBox
                this.txtPageCount.Text = this.ReportViewer1.ServerReport.GetTotalPages().ToString();
    Hope this helps! I would suggest you post a new thread in Visual Studio Report Controls forum if you need more help about using ReportViewer in ASP.NET web application.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Does anyone know how I can create "facing pages" in new Pages? I could do it in Pages 09, but can't find the option in new Pages.

    Does anyone know how I can create "facing pages" in new Pages? I could do it in Pages 09 but can't find the option in new Pages. I have documents created in Pages 09 and want to do some further work on them, but am now using new pages.

    There were 100+ features that didn't make it into the "new & improved, rewritten from the ground up” Pages 5. Some have returned with the updates & there are some new features that are worthwhile, but there are still 90+ features missing. Leave feedback for the Pages team using the link in the Pages menu and review & rate the new versions in the Mac App Store.
    If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09. You can continue to use them to get things done.

  • HT1420 Feeling really stupid with my new MAC - I can't find the "Store" menu in iTunes as referenced in the support article on how to authorize a computer.  Where is that menu option?  I've looked all over the page, in my account, etc.

    Feeling really stupid with my new MAC - I can't find the "Store" menu in iTunes as referenced in the support article on how to authorize a computer.  Where is that menu option?  I've looked all over the page, in my account, etc.

    Authorization and Deauthorization
    Macs:  iTunes Store- About authorization and deauthorization.
    Windows: How to Authorize or Deauthorize iTunes | PCWorld.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
    More On De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

  • Page 4 of 6 of the actual library storing apps has frozen; effects all apps on that page-all other pages are fine and accessible just not the apps on this page; wont even toggle and give the option to delete when i hold down on a an app. Any ideas?

    Page 4 of 6 of the actual library storing apps has frozen; effects all apps on that page-all other pages are fine and accessible just not the apps on this page; wont even toggle and give the option to delete when i hold down on a an app. Any ideas?

    this is similar to your question.just go-through it or if you stuck then reply back for more info on this problem : https://support.mozilla.org/en-US/questions/974711

  • How to increase brightness in Windows 7 and for the Option sceen?

    I have an 15" early 2011 MBP with Snow Leopard and reccently installed 64-bit Windows 7 Pro using an upgrade disk I had. Apparently the backup/upgrade disk would allow me to do a clean install despite not having a previous version of windows to base it off of now that XP is no longer supported.
    I had no initial problems installing Windows and getting the bootcamp software fully updated (3.2 I believe,) but while I was in the process of updating all of my windows software things started getting messy. I managed to update some windows functions, but eventually I ran into a real problem after downloading what I believe to be a service pack (not sure which one) that was recommended by the windows updater. After downloading the update, the computer needed to be reset.
    Upon resetting the laptop, I found that the option screen that lets you choose which partition to boot into is completely black. I can tell that the display is on because the screen is somewhat brighter than when the laptop is off, but I can't see anything.
    For grins, I tried seeing if hitting the right arrow key and then enter would take me to my windows partion, which it did. The loading screen (with the windows icon approaching and illuminating) is completely fine; however, after that loading screen, the screen appears to turn off (nothing, zilch, nada.) I let it sit there for about 5 minutes or so and still had nothing. Upon hard-resetting my computer, I found that when I tried booting windows again it gave me the options to boot into safe mode. Safe mode works and gives full brightness, normal mode does not.
    I looked on the forums and saw that deleting C:\WINDOWS\SYSTEM32\DRIVERS\ATIKMDAG.SYS could fix the issue. I downloaded Paragon, mounted the bootcamp partition and removed the offending file from my mac partition.
    The option screen was still black, but the login screen appeared after the computer tried to finish patching (the service pack patch failed.) The problem then was that the screen was incredibly dim at full brightness. I had control of the brightness settings via fn+f1/f2. All it took was dimming the screen 3 notches in order to make it go completely black. I logged in and tried updating the radeon video card, reset the computer and found myself back at the off screen issue mentioned earlier after the windows loading screen.
    I have yet to check, as this process has been extremely tiring and annoying, but I think I can fix the completely dead screen by removing the driver again. I gave this long story to show what I have done so hopefully I cam get a response I
    My burning questions are:
    What do I need to do to get the screen back to full brightness when I do get my laptop to boot into windows successfully?
    How do I fix my option screen to actually show up again instead of blindly picking the partition I want to boot into?
    Are there any windows updates that I need to avoid for 64-bit windows 7? I'm guessing whatever service pack it was I downloaded is one of them.

    I don't use the search engine, so I'm afriad I don't have direct experience here.
    What I'd probably do is modify the app so that it looks at the Host data to determine which directory it should point to for graphics, formatting, etc. You could also use the obj.conf with variables to pull graphics from directories appropriately branded. Something like:
    1) Create "additional doc directory" for images
    2) Find the entry in the obj.conf that points to the new directory
    3) Modify the path to something like /path/to/$host/images
    4) Make sure you create directories like:
    /path/to/foobar.com/images/
    /path/to/www.foobar.com/images/
    /path/to/baz.com/images/
    /path/to/www.baz.com/images/

  • When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box,

    # Question
    When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..

    Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do they launch OK while in Safe Mode?

  • My Apple ID asks for answers to security questions which I never input. I have searched how to reset my security questions and have found that the option below where your answers are to be input to reset questions does not exist on my iPhone 5c

    My Apple ID asks for answers to security questions which I never input. I have searched how to reset my security questions and have found that the option below where your answers are to be input to reset questions does not exist on my iPhone 5c

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (114119)

  • How do I completely crop a PDF so that the cropped data is removed and the file size is reduced?

    How do I completely crop a PDF so that the cropped data is removed and the total file size is reduced?
    When I use the "Crop" function, the cropped data still remains in the file and there is no reduction in file size. I need a way to truly crop a PDF using Acrobat software.

    When you export, try to get the full file path or else you will have to do a lot of manual searching.
    If you downloaded the picture from Messages, the picture is stored in your User Library/Messages. to make your User Library visible, hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Messages/Attachments. 
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
    You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

  • How can i set up my macbook pro that the sent emails show up in the sent folder?

    How can i set up my macbook pro that the sent emails show up in the sent folder?

    look at the Preferences and open the "Mailbox Behavior"  maybe the sent mail is being stored on the server?
    I going to have this post moved to the "Mail" forum

  • I keep getting a Yahoo DNS error handler page, and can't even access the add-ons page to disable it because it redirects me to the Yahoo DNS page immediately

    I have already seen some suggested solutions to the problem of this extremely annoying Yahoo DNS error solutions page, but they involve going to the add-ons page of firefox and disabling various add-ons. The issue is that even when I try to go to the add-ons page I get immediately redirected to the Yahoo DNS solutions page again.
    I have cleared my browser history and cache, hoping it would help, but nothing. Extremely annoying as I never installed anything - it simply started after a Firefox upgrade.
    Any help much appreciated.

    Open the Help menu and choose Restart Firefox with Add-ons Disabled. Remove any offending extensions. For details, see the "Uninstall from Firefox Safe Mode" section of the following article.
    * [[Cannot uninstall an add-on]]

  • How I download a MP4 series of videolectures (that the seller has stored in Amazon S3 and has sent to my iPad email address--which is different from the one I use from the MacBookPro) from my iPad to my MacBookPro-.

    How I download a MP4 series of videolectures (that the seller has stored in Amazon S3 and has sent to my iPad email address--which is different from the one I use from the MacBookPro) from my iPad to my MacBookPro (so that I can the save them in iTunes and then synchronize some of the videolectures to the iPad?)

    To set it up as POP you need to delete the account, reboot the phone by holding the HOME and SLEEP buttons at the same time until an Apple logo appears (about 10 seconds), then add it back following these instructions: Forcing creation of a POP or IMAP email account
    I understand that you have used the same account for many years, but the technology is also changing constantly. Years ago the standard was POP (Post Office Protocol), which was designed at a time when it was inconceivable that anyone would access their email from more than one device. When people started using multiple devices, for the most part they wanted to see changes on one device mirrored on another. A new standard, IMAP (Internet Mail Access Protocol) was developed. With iMAP the master copy of all messages resides on a server, and multiple devices are kept in sync with the server. So if you delete a message from one device it is removed from the server, and then removed from all other devices when they next sync. This is the same way Microsoft Exchange works. Other benefits of IMAP include the ability to have multiple mail folders that are kept in sync across devices. In your case you could use this to create a separate folder for each family member, so they could move messages to their own folder and not clutter up the shared Inbox. Most computer mail readers can even automatically sort incoming mail into folders based on the contents of the message.
    IMAP is considered a "higher level" standard than POP. When you create a mail account iOS devices query the server and ask what it supports; if it says it supports IMAP then the account is automatically configured for IMAP. So if you really want POP you must fool it, as described in the link above. In my experience Android devices default to the highest level protocol also, and I suspect newer Blackberries do (although it has been 15 years since I used a BB).

  • I tried to publish my project of 2 html pages, 3 photo pages and one widget page (map) to ipage hosting site. the two html pages published and that's all. Help.

    I tried to publish my project of 2 html pages, 3 photo pages and one widget page (map) to ipage hosting site. the two html pages published and that's all. Help.

    What's the URL of your site so we can examine it first hand?   Also try publishing the site to a folder on your hard drive and use the free FTP client  Cyberduck to upload your site.  It's been known to work when iWeb's ftp client has failed.
    OT

  • How do you lock a PDF file so that the user cannot create or delete bookmarks?

    How do you lock a PDF file so that the user cannot create or delete bookmarks?
    Thanks!

    There's no way to lock bookmarks specifically, but if you you can apply a
    security policy to prevent editing the PDF in general.

Maybe you are looking for