How to avoid purchase req and stock transport order to take part in MRP.

Please suggest how to avoid purchase req and stock transport order to take part in MRP.

hi,
check the settings for the MRP type...there you need to show which doc will be taken into considerations...
SPRO >> MM >> CBP...
Under CBP check for the MRP settings where it is placed(check under master data settings)...and check for the indicator for PR's and STO's release orders under tab "Additional external req. in the reorder point planning"..
Regards
Priyanka.P

Similar Messages

APO Process Order and Stock Transport Order

Using APO Process and Stock Transport Orders are generated. Plant A generates the orders so that plant B can make and ship the product back to plant A against the stock transport order using VL10b.
I see the stock transport order and process order in R/3. But when trying to ship the product to plant A, vl10b does not list any purchase orders?
How do you associate a Process Order with a transport order?
Something to do with the time horizons?

I hope you have resolved this query at your end. In case yes, Please share your observations

Procurement cycle in third party order and stock transport order.

please provide me in steps the procurement cycle in third party order and stock transport order.

Hi,
STO Process: -
1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings , Create the STO using T-Code:ME21N and maintain pricing conditions of freight and Save.
11. Create Delivery :VL10G
Click on the Background Button after selecting line item
A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
12. Picking, PGI:VL02N
13. Billing:VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Freight Clearing A/c - Cr - 10 INR (Supplying Plant)
Third Party Process Flow: -
1) MM01 - General Item category Group should be BANS in basic view of material master.
2) VA01 - Creation of sales order with VA01 transaction in SD module
3) When sales order is created system automatically creates a PR for the material with item category as "S"--> Third Party Item
4) ME21N - Directly PO with item category as "S" and delivery address as customer address
5) MIGO - Statistical GR by MM ( When it is made goods are received and delivered)
6) MIRO - Invoice by MM for vendor
7) VF01 - Billing by SD on Customers

Very imp stock transfer and stock transport order

hi folks,
please explain me in detail the difference between stock transfer and stock transport order.
regards,meena

Hi:
Stock Transfer is the physical movement of material from one location to another location,stock transport order is one way of doing the stok transfer.
Stock can be transfer between plant to plant,company code to company code,storage location to storage location.
However there are different procedures for stock transfers:
1.Stock Transfer using one step procedure: Here Goods issue and Goods receipts happens in single step.
2.Stock Transfer using Two stage procedure:The two-step procedure allows you to monitor the stocks in transit. After the goods issue is posted at the issuing point, the stock appears "in stock transfer" at the receiving point and is managed as such in the system.
3.Stock Transport Order:
This is transfer of material from one plant to other plant or co.code to co.code via SD route.
Here a.receiving plant raise the stock transport order on issuing plant.
       b. Issiuing plant creates the outbounmd delivery against STO and PGI.IF it is in India,then excise
           invoice creation.
       c. Receiving plant post the goods receipt against outbound delivery and post the excise ivoice.
       d. Invoice verification.
The main advantage of Stock Transport order is you have a more control because you can have purchasing document behind itand you can check the PO history which would gives all the details for Delivery as well GR documents.
However ftor STO via SD you need to configure the set up stock transport order in MM>Purchasing>Purchase Order-->Set Up Stock Transoport order.
Also on a data maintanace side you need to maintain the custmor and vendor relations.
Hope this would helps you.
Cheers
Rahul
Awards plz.if helpful.

Tables for delivery and stock transport orders

Hi Members,
I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
I don't know which tables these quantities sit into.
If you know please help.
Points will be suitably rewarded.
Reagrds,
Boby

>
Boby wrote:
> Hi Members,
>
> I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
> I don't know which tables these quantities sit into.
> If you know please help.
> Points will be suitably rewarded.
>
> Reagrds,
> Boby
if you only have to display deliveries and stock transport orders you can take LIKP and LIPS for the deliveries and LTAK and LTAP for transport orders.
for all the other elements displayed by MD04 we would have to know about your setup: are you using dispo-areas (which would populate tables MDMA ...) so in that case please provide more information.

Badi for purchase requisition and stock transfer order

Hi,
Could anybody please tell the BADI to update the item details (dates etc) in the 'Purchase requisition' and stock transfer orders.
I could find ME_PROCESS_REQ etc but could not locate the methods to modify the item level data.
Thanks & regards,
Ravish

Hi,
You can use the same badi which you found out.
ME_PROCESS_REQ.
In that there is a method process_item.
There you can get the line items of the PR.
Then in the POST method you can do the stock transfer .
In the check method also you can check the entire process of PR.
With Regards,
Sumodh.P

Authority check for sales order and stock transport order

In my code i have a requirement to enter sales order and Stock transport order. However i want that a WM resource should not be allowed to enter sales order and an SD resouce should not be allowed to enter stock tranpsort order. Please suggest.

Hi,
Another way to solve this is create a Z table with field user name and Resource type and compare the user id ( sy-uname) with the Z table and allow accordingly.
In production environment controlling authorization in this approch is much easier.
Hope this helps.
Regards
Bikas

Diff between stock transfer order and stock transport order

pls any body tell me diff between stock transfer order and stock transport order .is both are use for same pursose?pls explain

Check
very imp stock transfer and stock transport order

Planned order conversion to Process Order and Stock Transport Order

Hello Friends,
Help me to setup the below scenario
We have an requirement wherein MAT1 can be inhouse produced or can also get stock from other plant via stock transport order.
For which in Material master I have configured
MRP 2 view
Procuremrent Type - X
Special Procurement - 40 (wherin the splly plant is maintained)
MRP 3 view
Strategy group - 40 (as it is planning with final assembly)
But when i run MRP system created Planed orders for PIRs. Selecting Planned Order conversion only Purchase req tab is available we do not have an option to convert to production order.
Kindly help me correcting the settings, so that i should be in a position to convert planned order either to process order or Stock transport Purchase requisition.
Thanks and Regards,
Chandra

Hi Chandra,
Stock transfer is only possible with procurement type 'F'. when you take spl.procurement type 40, its a combination of F(procurement type) and U (Spl.procurement). it will over write the procurement type ('X' in your case) in material master. that is the reason u r getting only pur req.
if you know the proportion quantity i.e how much inhouse and how much stock transport, then use quota arrangement.
or
don't use any spl procurement key. define the materials in both the plants. when converting planned order to pur req. manually assign supplying plant and item category 'U'. try this.
Thanks & regards
Dilip

How to Add Freight to a stock transport order?

We have 2 plants on opposite coasts.
When we transfer goods from one plant to the other, we would like to add the cost of the freight to the inventory valuation in the new plant.
How can we do this?

> 1) U have to use Stock transport purchase orders.
We are currently doing this.
> 2) include the freight conditions in the stock transport pricing procedure .
I see in SPRO --> Materials Management --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> Assign Delivery Type and Checking Rule, that we are using delivery type ZNL for PO Type UB.
I also see in SPRO --> Logistics Execution --> Shipping --> Basic Shipping Functions --> Pricing --> Define Pricing Procedures for Delivery, that delivery type ZNL has no pricing procedure assigned to it.
Am I looking in the right place?
> 3) assign the pricing procedure to the schemas...
> 4) in the stock transport purchase order maintain the
> freight values against the freight condition
> 5) during goods receipt the freight cost is posted to
> the inventory in the receiving plant.

Commercial Invoice and Stock Transport Order

Hello Experts,
My client is using stock transport orders which sometimes results in cross border goods movement. I am not able to find any functionality for creating commercial invoices to be used for these types of shipping.
Any ideas?
rgds
GAR

Hi Gar,
Usually when there is a crossing of borders, it is a movement between 2 different companies code, therefore the intercompany purchase is the usual flow.
If you mean that the flow is between plants of the same company code between different countries, maybe you are talking about "Plants abroad" functionality.
http://help.sap.com/saphelp_45b/helpdata/en/34/60b1a0ae724effe10000009b38f91f/content.htm
Previously, the plants of a company code had to belong to the country of that company code.
As of Release 4.0A, it is possible to deviate from this rule for European company codes with European plants.
I never had to use this functionality at a customer site, but that sounds like your requirement
Also allows internal billing document for intrastat reporting, so feel free to evaluate!
Best Regards
Franck Lumpe
Freelance SAP Consultant

Link between batch stock and stock transport order no.

hello all,
my client want the report for stock in hand against batch and sto no..in standard tcode mb52(stock in hand) we can see the stock against batches.but i want the report for which sto no. stock is recieved corresponding to batch.
pls tell me from which table and field i should pick data for stock against sto no.
thanks in advance for ur valuable input
regards
simran
caution-- we are using two step procedure with stock transport order for transferring the material between plants

S

Account Postings in case Subscontarcting and Stock Transport Order.

Hi All,
Please help in understanding what account keys(G/L Accounts ) will be hit in the follwoing scenerios:
1. Standard Subscontarcting Process during GR.
2. Stock Transport Order , Delivery Type NL
    Movement Type , 641 and 101.
3. Stock Transport Order , Delivery Type NLCC
    Movement Type , 643 and 101.

Hi
1. Standard Subscontarcting Process during GR:
For eg) You are giving Components A & B to the SC-Vendor....and Getting back the Finished Product "C" from the SC-Vendor....
Now during GR...If you have activated Price Diff. account for SC Materials for your Plant in OLMB -
> GR -
> Activate Price Diff. Acc. for SC Material for your Plant....then foll. posting lines will be created..
Stock Acc. of F/G Product "C".... ..      BSX          Debited
GR/IR Clearing Acc.              .......       WRX         Credited
SC-Vendor service Charges .........       FRL          Debited
Stock Acc.of Components A & B..........BSX          Credited
Change in Stock Acc. of Comp. A&B....GBB-VBO Debited(+)
Change in Stock acc.of F/G Product "C".....BSV    Credited(-)
Price Diff Acc......................................PRD   As per situation
2. Stock Transport Order , Delivery Type NL
Movement Type , 641 and 101:
At Supplying Plant( During movement type:641)
Stock Account of Supp.Plant.....BSX Credited
Stock Acc. ofb Rec. Plant ........BSX Debited
If you maintain Std. Price for the material at Receiving Plant and if there is any Price difference...then Price Diff.Acc. will be triggered....ie) AUM....
At receiving Plant( for M.type:101) there will not be any acc.documents gennerated...
3. Stock Transport Order , Delivery Type NLCC
Movement Type , 643 and 101.
At Supplying Plant(M.Type:643):
Stock Acc.......................................BSX Credited(-)
Cost of Goods Sold Acc...................VAX debited(+)
At Receiving plant( M.Type:101):
Stock Acc.......................................BSX Debited
GR/IR Clearing Acc..........................WRX Credited(-)
Reward if useful
Regards
S.Baskaran

How to populate partner function for stock transport order in ME21n/ME22n

Please advise is there any way we can determine the partner functions to be populated in ME21n.
I have gone through sap note 117537 they said it is not required and not available in SAP standard way.
Then tried implementing user exit EXIT_SAPMM06E_013 and populating the required partner functions in XEKPA[].
It is getting triggered and i can see the values in table but after save i go and see in display ME23N i can't find any partner functions.
Later i found some interesting thread in SDN use exit: EXIT_SAPMM06E_012 and get the values from (SAPLMEPO)XEKPA[] in case of ME23N.
even this is not working.
DATA it_ekpa LIKE ekpa OCCURS 0 WITH HEADER LINE.
DATA name(50) VALUE '(SAPLMEPO)XEKPA[]'.
DATA name1(50) VALUE '(SAPMM06E)XEKPA[]'.
FIELD-SYMBOLS <f1> TYPE any .
IF sy-tcode+4(1) = 'N'.
   ASSIGN (name) TO <f1>.
ELSE.
   ASSIGN (name1) TO <f1>.
ENDIF.
it_ekpa[] = <f1>.
Any idea ?
Thanks,
Mahesh gattu

I got it fixed my self.
here is the solution.
in user exit :EXIT_SAPMM06E_012.
call below FM: MM_CALL_UPDATE_PARTNERS
Trick is pass the partner values the one you wanted to below table: x_mmpa and xuekpa.
you can calculate partner records from wyt3 table depends on your logic/requirement.
CALL FUNCTION 'MM_CALL_UPDATE_PARTNERS'
     EXPORTING
       ebeln       = wa_ebeln
       bstyp       = 'F'
*     knuma       = wa_knuma
       application = 'P'
     TABLES
       x_mmpa      = it_mmpa1
       y_mmpa      = it_mmpa2
       xuekpa      = it_uekpa1
       yuekpa      = it_uekpa2
       i_mmpa      = it_mmpa3
       u_mmpa      = it_mmpa4
       d_mmpa      = it_mmpa5.
Thanks,
Mahesh

Problem in creation of STO(stock transport order)

hi all SAP gurus,
i am facing the problem in creation of stock transport order with ME21N code. i m getting the error msg of "Not possible to determine shipping data for material in STO "
i have checked the stock transport order setup in customization. but not getting the clear idea to come out from this problem.
if anybody have the idea of " how to do the customization of stock transport order setup, pls. let me explain.
thnx in advance.
rgrds,
rajesh

Hi Rajesh,
when ur creating STO with UB doc type, then you have to maintain material in both the plants.
Regarding the error which is comming for you, you have to check the settings at
SPRO- IMG- MM-Purchasing-Set up stock transport order- Assign delivery type & Checking rule
here for document type UB and your supplying plant-XXXX select nothing for Dlv type(delivery type) and chr - 01 and after this save.
After this you create STO as you are doing and see what the system is prompting.
For any further clarification let me know.
Regards,
NJ

How to avoid purchase req and stock transport order to take part in MRP.

Similar Messages

Maybe you are looking for