How to avoid the duplicate receipts in SAP and Barcode system

Hi Everyone
We are using SAP ECC 5.0.Our receving is done by bar code system and it updates the SAP system. We have two separate database systems one for Bar code systems and another for SAP. Sometimes while receiving RFID scanner shows material is not received or failed and we have to receive it manually in the SAP system. Sometimes barcode system might have received but it is displayig error message, material receipt failed and we enter manually in the SAP and it becomes duplicate and creating inventory problems. Is there anyway we can fix this problem like while receving manually in the SAP system it should alert or pop message like material already received. What change we need to do in the configuration side.
Your help is greatly appreciated.
thanks in advance
Murali

Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
         substr(rcstcnatcnatcnatcnawther,3,2) c,
         substr(rcstcnatcnatcnatcnawther,5,1) s,
         substr(rcstcnatcnatcnatcnawther,6,3) tc,
         substr(rcstcnatcnatcnatcnawther,9,3) na,
         substr(rcstcnatcnatcnatcnawther,12,3) tc2,
         substr(rcstcnatcnatcnatcnawther,15,3) na2,
         substr(rcstcnatcnatcnatcnawther,18,3) tc3,
         substr(rcstcnatcnatcnatcnawther,21,3) na3,
         substr(rcstcnatcnatcnatcnawther,24,3) tc4,
         substr(rcstcnatcnatcnatcnawther,27,3) na4,
         substr(rcstcnatcnatcnatcnawther,30,10) wther,
         sno
    from scott.sms1 a
   where sno = (select max(sno)
                  from sms1
                 where sno != a.sno
               ); ---------------> added where clause with table alias.
end;Regards
Etbin

Similar Messages

How to avoid the duplicate values, I do not want the duplicate............

i have one database table called "sms1" that table is updated every day or on daily basis it has the following fields in it:
SQL> desc sms1;
Name Null? Type
MOBILE NUMBER
RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)
SNO NUMBER
INDATE DATE
From this table the is one column "RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)" . I am splitting it into different columns like :
SQL> desc smssplit;
Name Null? Type
R VARCHAR2(2 CHAR)
C VARCHAR2(2 CHAR)
S VARCHAR2(1 CHAR)
TC VARCHAR2(3 CHAR)
NA VARCHAR2(3 CHAR)
TC2 VARCHAR2(3 CHAR)
NA2 VARCHAR2(3 CHAR)
TC3 VARCHAR2(3 CHAR)
NA3 VARCHAR2(3 CHAR)
TC4 VARCHAR2(3 CHAR)
NA4 VARCHAR2(3 CHAR)
WTHER VARCHAR2(10 CHAR)
SNO NUMBER
INSERTDATA VARCHAR2(25 CHAR)
Now I am written a procedure to insert the data from "Sms1" table to smssplit table...
CREATE OR REPLACE PROCEDURE SPLITSMS
AS
BEGIN
INSERT INTO scott.SMSSPLIT ( R,C,S,TC,NA,TC2,NA2,TC3,NA3,TC4,NA4,WTHER,SNO)
SELECT SUBSTR(RCSTCNATCNATCNATCNAWTHER,1,2) R,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,3,2) C,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,5,1) S,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,6,3) TC,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,9,3) NA,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,12,3) TC2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,15,3) NA2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,18,3) TC3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,21,3) NA3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,24,3) TC4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,27,3) NA4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,30,10) WTHER, SNO
FROM scott.SMS1 where SNO=(select MAX (sno) from SMS1);
END;
Now in order to update the second table with data from first table on regular basis I have written a job scheduler and I am using oracle 9.0. version...
DECLARE
X NUMBER;
JobNumber NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'scott.SPLITSMS;'
,next_date => SYSDATE+1/1440
,interval => 'SYSDATE+1/1440 '
,no_parse => FALSE
:JobNumber := to_char(X);
END;
Now this job scheduler is working properly and updating the data for every one minute but it is taking or updating the duplicate values also ..like example:
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
Now I do not want the duplicate values to be updated ...and want them to ignore them.....
please I need a help on this query........How to avoid the duplicate values............

Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
         substr(rcstcnatcnatcnatcnawther,3,2) c,
         substr(rcstcnatcnatcnatcnawther,5,1) s,
         substr(rcstcnatcnatcnatcnawther,6,3) tc,
         substr(rcstcnatcnatcnatcnawther,9,3) na,
         substr(rcstcnatcnatcnatcnawther,12,3) tc2,
         substr(rcstcnatcnatcnatcnawther,15,3) na2,
         substr(rcstcnatcnatcnatcnawther,18,3) tc3,
         substr(rcstcnatcnatcnatcnawther,21,3) na3,
         substr(rcstcnatcnatcnatcnawther,24,3) tc4,
         substr(rcstcnatcnatcnatcnawther,27,3) na4,
         substr(rcstcnatcnatcnatcnawther,30,10) wther,
         sno
    from scott.sms1 a
   where sno = (select max(sno)
                  from sms1
                 where sno != a.sno
               ); ---------------> added where clause with table alias.
end;Regards
Etbin

How to avoide the control recipe creation step and control recipe complete

Hi
in process order procedure has configured in our syayrm ...like
orde creation,release,control recipe created at time orede release, then order conformation ,order inal conformation, control recipe comlete , order TECH., ...Like ths our order process configured..
here we not useing any control recipe functions ... and control recipr complte ...so how to remove this step from order process...pls could any one guide inthis issue.
Rgards
HGVD

Dear HGVD,
Assuming there is only one order type(process order type) is used in both the manufacturing plants,then create plant specific
production scheduling profile in CORY,for the plant 2000,assign the prod.schd.profile with the default order type and
do not include the check box for generate control recipe and save the data,but in the same CORY,assign the same order
type,with including the check box for generate control recipe.
Check by this way and revert back.
Regards
Mangalraj.S

How to change the default operators in sap web ui Search screen?

How to change the default operators in sap web ui Search screen?
For eg. Using advance search option , I have some fields with default operators like equals, contains,is between, is less than and is greater than. I don't need all these operators for this field.
I need only "equals" operator. How do i remove the rest of the operators?

There is a view cluster crmvc_dq where all the standard setting is present related to you r issue. Please try if you can modify that, that way you will avoid the code.
Incase you are not able to make any changes there then in that case you have to redefine the method GET_DQUERY_DEFINITION () of the IMPL class to delete the operators for a particular serach field.
Regards,
Harshit

How to delete the duplicate email address in BP master data

Hi,
When you get an email ids from the third party vendor and you are loading into CRM BP master data. how to delete the duplicate email address already exits in the system. In CRM you can create the same BP with different id. I would like to know how to delete the email address during importing email addresses from the third party tool.
During the campaign you are sending email to all your customers, when the customer want to unsubscibe the email address from your list, how to unsubcribe the email address and how to updat the BP master data.
If you are sending the email to customer, you are using html or simple text, if the customer wants only html or simple text, how you to specify in the system?
thanks,
arul

Hello Arul,
welcome to the SDN CRM Development forum.
1. I think you should clear the data with duplicate E-Mail adresses in the external tool.
2. Unsubscription could be done by a Marketing Attribute which could be set by using a Target Group which is created by Campaign Automation. Have a look at this Toppic. There is also a Best Practice avaliable at http://help.sap.com/bp_crmv340/CRM_DE/index.htm.
3. Also HTML or Simple text can be mained in a Marketing Attribute. You have to use different Mail Forms to which are sent to different Target groups.
Regards
Gregor

How can avoid the problem of Parameter Prompting when I submitting ?

I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
   1. using System;
   2. using System.Collections;
   3. using System.Configuration;
   4. using System.Data;
   5. using System.Linq;
   6. using System.Web;
   7. using System.Web.Security;
   8. using System.Web.UI;
   9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22.     CrystalReportViewer crViewer = new CrystalReportViewer();
23.     //CrystalReportSource crsource = new CrystalReportSource();
24.     int nItemId;
25.
26.     protected void Page_Load(object sender, EventArgs e)
27.     {
28.         //Database Connection
29.         ConnectionInfo ConnInfo = new ConnectionInfo();
30.         {
31.             ConnInfo.ServerName = "127.0.0.1";
32.             ConnInfo.DatabaseName = "Xcodf";
33.             ConnInfo.UserID = "HR777";
34.             ConnInfo.Password = "zghshshs";
35.         }
36.         // For Each Logon parameters
37.         foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38.         {
39.             cnInfo.ConnectionInfo = ConnInfo;
40.
41.         }
42.
43.
44.
45.
46.
47.
48.         //Declaring varibles
49.          nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50.         //string strStartDate = Request.QueryString.Get("StartDate");
51.         //int nItemId = 20;
52.         string strStartDate = "23-JUL-2010";
53.
54.         // object declration
55.         CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56.         CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59.         TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61.         // new report document object
62.         ReportDocument oRpt = new ReportDocument();
63.
64.         // loading the ItemReport in report document
65.         oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67.         // getting the database, the table and the LogOnInfo object which holds login onformation
68.         crDatabase = oRpt.Database;
69.
70.         // getting the table in an object array of one item
71.         object[] arrTables = new object[1];
72.         crDatabase.Tables.CopyTo(arrTables, 0);
73.
74.         // assigning the first item of array to crTable by downcasting the object to Table
75.         crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77.         dbConn = crTable.LogOnInfo;
78.
79.         // setting values
80.         dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81.         dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82.         dbConn.ConnectionInfo.UserID = "HR777";
83.         dbConn.ConnectionInfo.Password = "zghshshs";
84.
85.         // applying login info to the table object
86.         crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93.         crViewer.RefreshReport();
94.
95.                 // defining report source
96.         crViewer.ReportSource = oRpt;
97.         //CrystalReportSource1.Report = oRpt;
98.
99.         // so uptill now we have created everything
100.         // what remains is to pass parameters to our report, so it
101.         // shows only selected records. so calling a method to set
102.         // those parameters.
103.      setReportParameters();
104.     }
105.
106.     private void setReportParameters()
107.     {
108.
109.         // all the parameter fields will be added to this collection
110.         ParameterFields paramFields = new ParameterFields();
111.          //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112.        //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114.         // the parameter fields to be sent to the report
115.         ParameterField pfItemId = new ParameterField();
116.         //ParameterField pfStartDate = new ParameterField();
117.         //ParameterField pfEndDate = new ParameterField();
118.
119.         // setting the name of parameter fields with wich they will be recieved in report
120.
121.         pfItemId.ParameterFieldName = "RegionID";
122.
123.         //pfStartDate.ParameterFieldName = "StartDate";
124.         //pfEndDate.ParameterFieldName = "EndDate";
125.
126.         // the above declared parameter fields accept values as discrete objects
127.         // so declaring discrete objects
128.         ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129.         //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130.         //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132.         // setting the values of discrete objects
133.
134.
135.           dcItemId.Value = nItemId;
136.
137.         //dcStartDate.Value = DateTime.Parse(strStartDate);
138.         //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140.         // now adding these discrete values to parameters
141.           //paramField.HasCurrentValue = true;
142.
143.
144.
145.           //pfItemId.CurrentValues.Clear();
146.          int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147.           pfItemId.Name = valueIDD.ToString();
148.
149.         pfItemId.CurrentValues.Add(dcItemId);
150.         //ParaLocation.ApplyCurrentValues;
151.         pfItemId.HasCurrentValue = true;
152.
153.         //pfStartDate.CurrentValues.Add(dcStartDate);
154.         //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156.         // now adding all these parameter fields to the parameter collection
157.         paramFields.Add(pfItemId);
158.
159.         //paramFields.Add(pfStartDate);
160.         //paramFields.Add(pfEndDate);
161.         /////////////////////
162.         //Formula from Crystal
163.        //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164.         crViewer.RefreshReport();
165.         // finally add the parameter collection to the crystal report viewer
166.         crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170.     }
171. }

Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

How to restrict the duplicate values in lov column of VO based Adv Table

Hi Gurus,
I want to restrict the duplicate values at lov which is a colunm in an Adv Table.
If user enters duplicate values then first it should show an error msg that Duplicate values have been entered.
After the duplicate values have been removed, then the user can save all the values in the table.
My Adv Table is based on a VO.
The link how to restrict the duplicate values at form level
talks about Adv Table based on a EoVO, which doesnot work in my case.
My Approach,
I am iterating through RowSetIterator and committing through PROCEDURE.
I am able to avoid duplicate entry through a function checkRespId. (given below)
Below code is for iterating and committing.
public void saveline(String reqid,String userid)
System.out.println("RequestId/saveline"+reqid);
System.out.println("UserId/saveline"+userid);
OAViewObject vo = (OAViewObject)getRespLineVO1();
RespLineVORowImpl row = null;
int fetchedRowCount = vo.getFetchedRowCount();
RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
deleteIter.setRangeStart(0);
deleteIter.setRangeSize(fetchedRowCount);
for (int i = 0; i < fetchedRowCount; i++)
System.out.println("Inside the for LOOP");
row = (RespLineVORowImpl)deleteIter.getRowAtRangeIndex(i);
String respoidid = row.getAttribute("ResponsibilityId")+"";
String respname = row.getAttribute("ResponsibilityName")+"";
String stdate = row.getAttribute("StartDate")+"";
String enddate = row.getAttribute("EndDate")+"";
String linestatus ="A";
if(userid!=null)
if(!(respoidid.equals("null")) && respoidid!=null)
String checkingrespid=null;
checkingrespid = checkRespId(userid,respoidid);+contains no if not duplicate and yes if its duplicate+
System.out.println("checkingrespid for Resp with ID :"+respoidid+"exists or not "+checkingrespid);
if(checkingrespid.equals("No"))
String message, result = null;
Connection txn = getOADBTransaction().getJdbcConnection();
try
calling PROC ...
catch(Exception e)
message = "Error in Inserting into line" + e;
throw new OAException(message, OAException.ERROR);
else
throw new OAException("You have entered duplicate no. of values", OAException.ERROR);
else
System.out.println("respoidid is null");
break;
deleteIter.closeRowSetIterator();
public String checkRespId(String userid,String respoidid)
String createRow="No";
OAViewObject vo = (OAViewObject)findViewObject("CheckRespVO1");
if (vo != null)
vo.setWhereClauseParams(null);
vo.setWhereClauseParam(0, userid);
vo.setWhereClauseParam(1, respoidid);
vo.executeQuery();
System.out.println("ROW COUNT IS "+vo.getRowCount());
if(vo.getRowCount()>0)
createRow="Yes";
else
createRow="No";
return createRow;
Problem:
I remove the duplicate entries and click on save and get this error.
Unable to perform transaction on the record. \nCause: The record contains stale data. The record has been modified by another user.
\nAction: Cancel the transaction and re-query the record to get the new data.
Thanks,
Sombit

Hi Anil,
I am trying out your code but stuck in inserting the rows
using your code in URL: http://oracleanil.blogspot.com/2010/09/oaf-passing-table-type-object-to-oracle.html
I am always getting the same exception i.e COde blast in when I run.
My modified code is:
String[] as = null;
Number[] vNumber = null;
Number[] vNumberrespid = null;
Number reqidnumber = null;
reqidnumber = new Number(Integer.parseInt(reqid));
Connection txn = getOADBTransaction().getJdbcConnection();
String mCreateSearchRequestStatement = null;
OAViewObject vo = (OAViewObject)findViewObject("RespLineVO1");
int j = vo.getFetchedRowCount();
try
System.out.println("abouce try");
vo.reset();
if (vo.getFetchedRowCount() > 0)
System.out.println(String.valueOf("Fetched row count ").concat(String.valueOf(vo.getFetchedRowCount())));
int i = 0;
as = new String[j];
vNumber = new Number[j];
vNumberrespid = new Number[j];
while (vo.hasNext())
vo.next();
System.out.println(String.valueOf("Inisde the do while loop").concat(String.valueOf(i)));
vNumber[i] = (reqidnumber);
vNumberrespid = ((Number)vo.getCurrentRow().getAttribute("ResponsibilityId"));
as[i] = String.valueOf(vo.getCurrentRow().getAttribute("ResponsibilityName")).concat(String.valueOf(""));
System.out.println("Request ID "+reqidnumber[i]);//getting null even there is some value selected
System.out.println("ResponsibilityId "+vNumberrespid[i]);//getting null even there is some value selected
System.out.println("Resp Name "+as[i] );//getting null even there is some value selected
i++;
CallableStatement cs = txn.prepareCall("{call XX_PassTableType.XX_PassTableType_prc(:1, :2,:3)}");
ARRAY array = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumber);
ARRAY arraynew = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumberrespid);
ARRAY array1 = new ARRAY(new ArrayDescriptor("APPS.JTF_VARCHAR2_TABLE_100", txn), txn, as);
cs.setArray(1, array);
cs.setArray(2, arraynew);
cs.setArray(3, array1);
cs.registerOutParameter(3, 2003, "JTF_VARCHAR2_TABLE_100");
cs.execute();
ARRAY error = null;
error = (ARRAY)cs.getArray(2);
if ((error != null) && (error.length() > 0))
System.out.println(String.valueOf("Error is ").concat(String.valueOf(error.getArray())));
String[] retError = new String[j];
retError = (String[])error.getArray();
System.out.println(String.valueOf("Error in saving data").concat(String.valueOf(retError[0])));
cs.close();
catch (Exception exception)
throw new OAException("code blast", OAException.ERROR);
Thanks,
Sombit

How to avoide multiple duplicate entries in adress book?

How to avoide multiple duplicate entries in adress book? I can add the same contact name and number more than twice and the phone isn't warning me at all!!! I's quite a heck for me.

not possible from inside AB AFAIK. but you can do the following. in finder open the folder /users/username/library/application support/address book/metdata. switch to the list mode and sort by date modified. quicklook the vcards at the top to see which ones they are.

How to retrieve the duplicates records.

Hi friends,
My next issue, how to retrieve the duplicate records in web intelligence.I checked the option Retrieve duplicate records in web intelligence as well.But it is not helping me.
Hope you guys are help to solve this issue.
Thanks lot,
Regards,
-B-

hi Blaji,,
ive tried this here and it worked perfectly with me
even so, you dont need to make the QTY as a dimension, you can leave it as a measure also, and it will work good with you.
click the block on the WebI, the Block itself.
and find its properties, under "Display", you will find
"Avoid Duplicate row Aggregations"
in the query it self you should flag "Retrieve Duplicated Rows"
i think this will work fine with you
good luck
Amr

How to delete the duplicate data from PSA Table

Dear All,
How to delete the duplicate data from PSA Table, I have the purchase cube and I am getting the data from Item data source.
In PSA table, I found the some cancellation records for that particular records quantity would be negative for the same record value would be positive.
Due to this reason the quantity is updated to target but the values would summarized and got the summarized value of all normal and cancellation .
Please let me know the solution how to delete the data while updating to the target.
Thanks
Regards,
Sai

Hi,
in deleting the records in PSA table difficult and how many you will the delete.
you can achieve the different ways.
1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
3.you can restrict the cancellation records at query level.
Thanks,
Phani.

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

How to delete the duplicate cards in ALUI

Hi,
How to delete the duplicate cards in knowledge directory
Thanks & Regards
Dheeraj
Edited by: dheeraj on Sep 17, 2008 2:31 PM

Not sure if there is an automated way to do this, but I get around it by just searching on (2), (3), (4).
Not practical for large installs, but it works in our small environment.
You might be able to use the Smart Sort utility to find files that have () characters in them? Not positive though.
It would make a great enhancement request to add dupes to either a log file or better yet an admin utility to track the living documents to ensure they are fixed!
(I'm going to file such an enhancement right now!)

How to delete the duplicate cards in alui crawlers

How to delete the duplicate cards in alui crawlers

Not sure if there is an automated way to do this, but I get around it by just searching on (2), (3), (4).
Not practical for large installs, but it works in our small environment.
You might be able to use the Smart Sort utility to find files that have () characters in them? Not positive though.
It would make a great enhancement request to add dupes to either a log file or better yet an admin utility to track the living documents to ensure they are fixed!
(I'm going to file such an enhancement right now!)

How to avoid the event has been repeated many times in the background

Application, the main screen is divided into two containers:left and right container,
The right side of the container is divided into two containers:top and bottom container,
There is a button in the left container.
Click the button, the container at lower right will using ModuleManager load Module, The following container load of the right of the screen has been monitoring the container above the action.
Problem:
When you click the button repeatedly to load the container in the lower right, it will create multiple instances, and can not be freed immediately. When the above container do an action or event, there are multiple instances of monitoring exist.
The background will be repeat the action or event many times.
How to avoid the event has been repeated many times in the background?
Thanks

Flex harUI
multiple instances of a mxml, maybe ?

How to avoid the long time consuming process of settlement on periodic basi

For investment Project(purpose of capitalisation) related expenses We would like to show it Directly in Balance Sheet rather than P/L A/C.Whether it is feasible or not?as per one of consultant it will be first hit the p/L and after settlement it will only be shown in B/Sheet.So how to avoid the long time consuming process of settlement on periodic basis.

Hi, could you write down an example? And what you mean by investment project-is this an WBS?

How to avoid the duplicate receipts in SAP and Barcode system

Similar Messages

Maybe you are looking for