How to avoid the form's message situation

hi all,
i am using Forms [32 Bit] Version 6.0.8.24.1 (Production).
i have base table block. So at the time of saving some process should happen, based on selected record.
so i have written the procedure in key-commit trigger. But my problem is when user edit the data and close the form then the message pops up as usual(do you want..) if i give yes then the procedure is not firing.
I got a feed back that that message(do you want to save the changes) situation itself i should avoid. How can i avoide that message situation.
Forcing the user to save in pre-commit trigger is one option but my question is this situation can be avoided?
Is this can be done?
Please advise.
Thanks..

do i have to place my code in 'on-update' or 'pre-update' trigger?I mentioned ON-UPDATE (block-level)
and one more question the checkbox is control item. so when i am selecting or deselecting the check box do i have to set the record status?Yes, you need to change the record status to change if check box is non-database item.
but one more question i want ask. The process what i am doing should happen only when user saves the record. If i write it in the block level trigger if user doesnot save the recod and exists then also my process will fire?No.
if i write my code in block level means.
if for any record if any error means i have to stop the full process itself and nothing should happen. In other words if user process 4 record and in 5 record he is getting error means the four records also should not go into table. is this will happen if i move the code to block level trigger?Yes it will not continue and will not send any record in database.
-Ammad

Similar Messages

How to suppress the Forms special message on run time (forms 6i)

Hi,
I am using forms 6i and got the following message on run time. How do I suppress this message on run time? I don�t know the message code of this message, may be it is the prompt or some other type of message.
However I also used the system variable MESSAGE_LEVEL to suppress this message but it did not suppress.
For Example:
:SYSTEM.MESSAGE_LEVEL := '25';
Please send the code to suppress this message.
FORM MESSAGE:
Oracle Forms 6.0
Use the Windows Program Manager to execute operating system commands.
Thanks
Amit

Dear Frank,
Thanks for reply.As you said I keep the value <NULL> in the Form Module properties palette.But that forms message did not suppress and it still display.The message is:
Oracle Forms 6.0
Use the Windows Program Manager to execute operating system commands
Could you please give me its solution how to avoid that message?
Thanks
AMIT

How to avoid the objects dependency in the packages by standard settings?

Hi,
How to avoid the objects dependency in the packages by standard settings?
Example Scenario -> Our project uses two packages u2018ZZP1u2019 and u2018ZZP2u2019 for developments in the system u2018SN1u2019. We created a domain u2018ZZ_DO_TESTu2019 in the Package u2018ZZP1u2019. Now we have to make sure that the developer should not use or refer domain u2018ZZ_DO_TESTu2019 for the developments in the package u2018ZZP2u2019.
u2026Naddy

Evevn i felt that in the CTS at least a warning can be given if the included objects refer to any other object(s) which arre:
1. Local Objects
2. Locked under other requests,
3. Lastly able to detect cyclic dependency as in we had a situation where we had a program locked in request A which calls an FM locked in request B. Now Request B refers to a message which is locked in request A.Since it was a message it gave only requrn code 4 in transport and transport ended with warnings. But if it is some other object then it is going to give compile error in at least one transport and neither can be moved without the other.
Anyways, i will check the BAPI he has mentioned and see if any workaround can be done,
Request: Please keep the post active until we arrive at a good solution,Thanks.

How can avoid the problem of Parameter Prompting when I submitting ?

I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
   1. using System;
   2. using System.Collections;
   3. using System.Configuration;
   4. using System.Data;
   5. using System.Linq;
   6. using System.Web;
   7. using System.Web.Security;
   8. using System.Web.UI;
   9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22.     CrystalReportViewer crViewer = new CrystalReportViewer();
23.     //CrystalReportSource crsource = new CrystalReportSource();
24.     int nItemId;
25.
26.     protected void Page_Load(object sender, EventArgs e)
27.     {
28.         //Database Connection
29.         ConnectionInfo ConnInfo = new ConnectionInfo();
30.         {
31.             ConnInfo.ServerName = "127.0.0.1";
32.             ConnInfo.DatabaseName = "Xcodf";
33.             ConnInfo.UserID = "HR777";
34.             ConnInfo.Password = "zghshshs";
35.         }
36.         // For Each Logon parameters
37.         foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38.         {
39.             cnInfo.ConnectionInfo = ConnInfo;
40.
41.         }
42.
43.
44.
45.
46.
47.
48.         //Declaring varibles
49.          nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50.         //string strStartDate = Request.QueryString.Get("StartDate");
51.         //int nItemId = 20;
52.         string strStartDate = "23-JUL-2010";
53.
54.         // object declration
55.         CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56.         CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59.         TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61.         // new report document object
62.         ReportDocument oRpt = new ReportDocument();
63.
64.         // loading the ItemReport in report document
65.         oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67.         // getting the database, the table and the LogOnInfo object which holds login onformation
68.         crDatabase = oRpt.Database;
69.
70.         // getting the table in an object array of one item
71.         object[] arrTables = new object[1];
72.         crDatabase.Tables.CopyTo(arrTables, 0);
73.
74.         // assigning the first item of array to crTable by downcasting the object to Table
75.         crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77.         dbConn = crTable.LogOnInfo;
78.
79.         // setting values
80.         dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81.         dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82.         dbConn.ConnectionInfo.UserID = "HR777";
83.         dbConn.ConnectionInfo.Password = "zghshshs";
84.
85.         // applying login info to the table object
86.         crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93.         crViewer.RefreshReport();
94.
95.                 // defining report source
96.         crViewer.ReportSource = oRpt;
97.         //CrystalReportSource1.Report = oRpt;
98.
99.         // so uptill now we have created everything
100.         // what remains is to pass parameters to our report, so it
101.         // shows only selected records. so calling a method to set
102.         // those parameters.
103.      setReportParameters();
104.     }
105.
106.     private void setReportParameters()
107.     {
108.
109.         // all the parameter fields will be added to this collection
110.         ParameterFields paramFields = new ParameterFields();
111.          //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112.        //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114.         // the parameter fields to be sent to the report
115.         ParameterField pfItemId = new ParameterField();
116.         //ParameterField pfStartDate = new ParameterField();
117.         //ParameterField pfEndDate = new ParameterField();
118.
119.         // setting the name of parameter fields with wich they will be recieved in report
120.
121.         pfItemId.ParameterFieldName = "RegionID";
122.
123.         //pfStartDate.ParameterFieldName = "StartDate";
124.         //pfEndDate.ParameterFieldName = "EndDate";
125.
126.         // the above declared parameter fields accept values as discrete objects
127.         // so declaring discrete objects
128.         ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129.         //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130.         //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132.         // setting the values of discrete objects
133.
134.
135.           dcItemId.Value = nItemId;
136.
137.         //dcStartDate.Value = DateTime.Parse(strStartDate);
138.         //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140.         // now adding these discrete values to parameters
141.           //paramField.HasCurrentValue = true;
142.
143.
144.
145.           //pfItemId.CurrentValues.Clear();
146.          int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147.           pfItemId.Name = valueIDD.ToString();
148.
149.         pfItemId.CurrentValues.Add(dcItemId);
150.         //ParaLocation.ApplyCurrentValues;
151.         pfItemId.HasCurrentValue = true;
152.
153.         //pfStartDate.CurrentValues.Add(dcStartDate);
154.         //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156.         // now adding all these parameter fields to the parameter collection
157.         paramFields.Add(pfItemId);
158.
159.         //paramFields.Add(pfStartDate);
160.         //paramFields.Add(pfEndDate);
161.         /////////////////////
162.         //Formula from Crystal
163.        //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164.         crViewer.RefreshReport();
165.         // finally add the parameter collection to the crystal report viewer
166.         crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170.     }
171. }

Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

How to get the number of messages consumed by a MDB ??

Hi all,
How to get the number of messages consumed by a MDB displayed in OEM in a Java Application ???
DMS ??? what use DMS ???
tanks

ok.
Well using DMS is one way to get at these sorts of stats in a programmatic manner.
There's a Java API you can use, or you could call out to the Spy servlet to query the DMS stats in either text or XML form.
I don't have an MDB published so I can't show you specifiically, but here's the sort of query you can use to extract the data.
http://localhost:8888/dms0/Spy?format=raw&table=oc4j_ejb_stateless_bean&recurse=children
Which produces a table of the TEXT form:
<DMSDUMP version='9.0.4' timestamp='1163456821185 (Tue Nov 14 08:57:01 CST 2006)' id='8888' name='OC4J'>
<statistics>
/oc4j [type=n/a]
/oc4j/default [type=oc4j_ear]
/oc4j/default/EJBs [type=oc4j_ejb]
/oc4j/default/EJBs/jmsrouter_ejb [type=oc4j_ejb_pkg]
/oc4j/default/EJBs/jmsrouter_ejb/AdminMgrBean [type=oc4j_ejb_stateless_bean]
pooled.count:     11     ops
pooled.maxValue:     1     count
pooled.minValue:     0     count
pooled.value:     0     count
ready.count:     11     ops
ready.maxValue:     1     count
ready.minValue:     0     count
ready.value:     0     count
session-type.value:     Stateless
transaction-type.value:     Bean
/oc4j/default/EJBs/jmsrouter_ejb/EnqueuerBean [type=oc4j_ejb_stateless_bean]
pooled.count:     11     ops
pooled.maxValue:     0     count
pooled.minValue:     0     count
pooled.value:     0     count
ready.count:     11     ops
ready.maxValue:     0     count
ready.minValue:     0     count
ready.value:     0     count
session-type.value:     Stateless
transaction-type.value:     Bean
/oc4j/default/EJBs/jmsrouter_ejb/TimerHandlerBean [type=oc4j_ejb_stateless_bean]
pooled.count:     11     ops
pooled.maxValue:     0     count
pooled.minValue:     0     count
pooled.value:     0     count
ready.count:     11     ops
ready.maxValue:     0     count
ready.minValue:     0     count
ready.value:     0     count
session-type.value:     Stateless
transaction-type.value:     Bean
</statistics>
</DMSDUMP>
Or produces an XML document of the form:
http://localhost:8888/dms0/Spy?format=xml&table=oc4j_ejb_stateless_bean&recurse=children
You can use the Spy console to find the table that contains the details for MDB and then take it from there.
This is not what you specifically want to do, but it does provide a good overview of how DMS is used.
http://www.oracle.com/technology/pub/notes/technote_dms.html
-steve-

How to get the form name which is used in standard tcode like me23n in sap

how to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

how to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

How to get the form printed through the transaction ME42

hi,
How to get the form printed through the transaction ME42.
For example :
In t.code vf03 . In the main menu there is an option billing document , when we click on that we get a drop down menu which shows issue output to. If a print program call has the code to get the value from the t.code , immdiately when we click issue output to it call the form.

Here go to ME42 put in your RFC no, in the menu Header -- Messages, go there and see if a message has been inserted, else you can insert one.
when you save this, it will call the form.
Regards,
Ravi

Hi can anyone tell me how to make the forms url short to the end user

Hi,
Im using oracle forms 11gR2 and everything is working fine, but my question in how to make the forms url short to the end user.
For example my forms url is " http://localhost:9001/forms/frmservlet " now i want to modify this url as "myweb.gov.ae"
can anybody suggest me the possibilities to change to default forms url to our own url as mentioned in the above example.
Thanks & Regards,
Hari

You would have to either -
* edit the code pointed to by the new action attribute to
include the form
processing and email generation, or
* edit the form processing script to also include the insert
record and
check user name scripting
The former is probably the better procedure, since I suppose
you'd want to
do the check user name before sending the email.
Unfortunately, this means
you will have to get your hands into the code, or hire
someone to do it for
you.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ducati1" <[email protected]> wrote in
message
news:gkriis$et6$[email protected]..
> Hi guys.
> I have a page with a form on it here.
>
http://www.thechallenge.net.au/superredemption.php
> I want the data placed in the textfields within the form
to come to me in
> an
> email upon submission.
> Now normally I would action the form to use this page
here
>
http://www.thechallenge.net.au/Redemptionform.txt
> But because the action of the form is now <?php echo
$editFormAction; ?>
> due
> to an insert record and check user name server behavior
I cannot use my
> normal
> method.
> Can anyone tell me how I can get around this problem?
>

How to avoid submitting form twice

How to avoid submitting form twice when this form use spry
validation.

The first step in your hanlder function would be to disable
the submit button.

How to avoid the Blank elemts in the List Item

Dear All,
I am using a List Item
List Elements List Item Value
Yes 1
No 2
Only two elements in this List Item.But at Run time there is one Blank element.
I need to display only two elements from the List Item .How to avoid the Blank.
Thanks and Regards,
Fazil

Fazil,
I am using a List ItemList Elements List Item Value
Yes 1
No 2
Only two elements in this List Item.But at Run time there is one Blank element.
I need to display only two elements from the List Item .How to avoid the Blank.>
Maybe you actually have null entries in your list. You can clean it up using keys as discussed here http://paranoid-engineering.blogspot.in/2008/05/wonderland-of-oracle-forms-builder.html (Ignore the personal opinions of the author if you will ;) ).
Cheers,

How to avoid the dtd validate of the "iTunes Music Library.xml " when read?

Hi all,
In the article of What are the iTunes library files?("http://docs.info.apple.com/article.html?artnum=93732" ),there is something about the function of "iTunes Music Library.xml " of iTunes.I can get information by reading this xml file.But this file must be validated online(dtd validate).When the net is unconnected,the web exception may be threw.How to avoid the dtd validate of the "iTunes Music Library.xml " when read?Thank you.

You can do this with YamiPod (Free)
http://www.yamipod.com/main/modules/downloads/
Or manualy:
Here is a link to where it tells how to do this manualy:
http://discussions.apple.com/message.jspa?messageID=797432#797432

How to avoid the duplicate values, I do not want the duplicate............

i have one database table called "sms1" that table is updated every day or on daily basis it has the following fields in it:
SQL> desc sms1;
Name Null? Type
MOBILE NUMBER
RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)
SNO NUMBER
INDATE DATE
From this table the is one column "RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)" . I am splitting it into different columns like :
SQL> desc smssplit;
Name Null? Type
R VARCHAR2(2 CHAR)
C VARCHAR2(2 CHAR)
S VARCHAR2(1 CHAR)
TC VARCHAR2(3 CHAR)
NA VARCHAR2(3 CHAR)
TC2 VARCHAR2(3 CHAR)
NA2 VARCHAR2(3 CHAR)
TC3 VARCHAR2(3 CHAR)
NA3 VARCHAR2(3 CHAR)
TC4 VARCHAR2(3 CHAR)
NA4 VARCHAR2(3 CHAR)
WTHER VARCHAR2(10 CHAR)
SNO NUMBER
INSERTDATA VARCHAR2(25 CHAR)
Now I am written a procedure to insert the data from "Sms1" table to smssplit table...
CREATE OR REPLACE PROCEDURE SPLITSMS
AS
BEGIN
INSERT INTO scott.SMSSPLIT ( R,C,S,TC,NA,TC2,NA2,TC3,NA3,TC4,NA4,WTHER,SNO)
SELECT SUBSTR(RCSTCNATCNATCNATCNAWTHER,1,2) R,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,3,2) C,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,5,1) S,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,6,3) TC,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,9,3) NA,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,12,3) TC2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,15,3) NA2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,18,3) TC3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,21,3) NA3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,24,3) TC4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,27,3) NA4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,30,10) WTHER, SNO
FROM scott.SMS1 where SNO=(select MAX (sno) from SMS1);
END;
Now in order to update the second table with data from first table on regular basis I have written a job scheduler and I am using oracle 9.0. version...
DECLARE
X NUMBER;
JobNumber NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'scott.SPLITSMS;'
,next_date => SYSDATE+1/1440
,interval => 'SYSDATE+1/1440 '
,no_parse => FALSE
:JobNumber := to_char(X);
END;
Now this job scheduler is working properly and updating the data for every one minute but it is taking or updating the duplicate values also ..like example:
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
Now I do not want the duplicate values to be updated ...and want them to ignore them.....
please I need a help on this query........How to avoid the duplicate values............

Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
         substr(rcstcnatcnatcnatcnawther,3,2) c,
         substr(rcstcnatcnatcnatcnawther,5,1) s,
         substr(rcstcnatcnatcnatcnawther,6,3) tc,
         substr(rcstcnatcnatcnatcnawther,9,3) na,
         substr(rcstcnatcnatcnatcnawther,12,3) tc2,
         substr(rcstcnatcnatcnatcnawther,15,3) na2,
         substr(rcstcnatcnatcnatcnawther,18,3) tc3,
         substr(rcstcnatcnatcnatcnawther,21,3) na3,
         substr(rcstcnatcnatcnatcnawther,24,3) tc4,
         substr(rcstcnatcnatcnatcnawther,27,3) na4,
         substr(rcstcnatcnatcnatcnawther,30,10) wther,
         sno
    from scott.sms1 a
   where sno = (select max(sno)
                  from sms1
                 where sno != a.sno
               ); ---------------> added where clause with table alias.
end;Regards
Etbin

How to run the form that is only installed on a PC and not using a server?

Hi
I am new to Oracle and have taken the forms class. But I do not understand how to run the form from my PC using XP windows. (Do not have access to a server).
I have started the OC4J, made sure the listener was started, compiled the form and then when I run it, it automatically goes to the HTTP:
ERROR: res://ieframe.dll/acr_depnx_error.htm#,http://kevin:8889/forms/frmservle
I connected to the database correctly. I can process a report and it does nor try to access the internet. My only issue is running the form. I verified it compiled.
Sorry for a basic question. Could someone please help, I tried reviewing other questions, but not sure if they are connecting to a server or not.
I see webutil but is it required if I don't have a server? Thank you in advance.

Regardless of the version, it appears that you may not have configured the Builder. Do the following:
1. Open the Builder
2. From the menu, select Edit > Preferences > Runtime
3. In the box labeled "Application Server URL:", enter a local URL needed to run a form OR click the button labeled "Reset to Default". If you decide to manually enter a value, it would looks something like this:
http://localhost:8889/forms/frmservlet
4. In the field labeled "Web Browser Location:", enter the path and executable to your preferred browser. So for example if IE is your browser of choice the entry would most likely look like this:
C:\Program Files\Internet Explorer\IEXPLORE.EXE
5. Click on OK and retest.
By the way, you can manually enter a URL in the browser. Clicking the RunForm button from the Builder is strictly optional. To run the "test" form directly from the browser enter the following into the browser's address field:
http://localhost:8889/forms/frmservlet?form=test
More information about Forms can be found on OTN:
http://www.oracle.com/technology/products/forms/index.html

How to put the form in Query mode

Hello
Please let me know how to put the form or block in Query mode , so that when i run the form it should be in Query mode . I have seen properties of SET_FORM_PROPERTY and SET_BLOCK_PROPERTY but cannot find one
Thanks

QUERY mode? Did you mean, that you can only QUERY without changing data.
This is the QUERY-ONLY-mode, which can be started e.g. call_form
this is the help for that topic:
PROCEDURE CALL_FORM
(formmodule_name VARCHAR2,
display NUMBER,
switch_menu NUMBER,
query_mode NUMBER,
data_mode NUMBER,
paramlist_name VARCHAR2);
query_mode
NO_QUERY_ONLY (The default.) Form Builder will run the indicated form in normal mode, allowing the end user to perform inserts, updates, and deletes from within the called form.
QUERY_ONLY Form Builder will run the indicated form in query-only mode, allowing the end user to query, but not to insert, update, or delete records.

How to avoid the event has been repeated many times in the background

Application, the main screen is divided into two containers:left and right container,
The right side of the container is divided into two containers:top and bottom container,
There is a button in the left container.
Click the button, the container at lower right will using ModuleManager load Module, The following container load of the right of the screen has been monitoring the container above the action.
Problem:
When you click the button repeatedly to load the container in the lower right, it will create multiple instances, and can not be freed immediately. When the above container do an action or event, there are multiple instances of monitoring exist.
The background will be repeat the action or event many times.
How to avoid the event has been repeated many times in the background?
Thanks

Flex harUI
multiple instances of a mxml, maybe ?

How to avoid the form's message situation

Similar Messages

Maybe you are looking for