How to avoid the logon screen after closing the browser

Im working with annonymous users showing a Iview but when I close the browser, instead of closing the browser the logon of portal appears. I dont want that how can I avoid this ?
thx

Hi
I am not clear with your question. How do you close the browser ? Is it by hitting the cross button on the Top right corner ?
Murali.

Similar Messages

  • My iPad3 loses the 3g connection after closing the magnetic cover.

    My iPad 3 loses the 3g connection after closing the magnetic cover.  When the cover is opened, the iPad shows the connection is active.  However, it does not connect but searches for emails etc.  I have to then reboot.

    have you tried disabling then reabling the 3G setting on your iPad after waking the iPad?
    It may be that as it goes to sleep the iPad loses the 3G connection, you may be in a low connection area, and then has problems finding it again, this can happen occassional with WiFi.
    If you go into Settings, then Mobile Data and toggle  the On/Off switch Off, then On again, see if that brings it back without restarting the iPad.

  • How to reinitialize the sel screen after displaying the output..?

    Hi All,
    I have a report program. In the selection screen, I will provide the input parameters and execute the program which displays the output on the screen. Now, if I come BACK to the selection screen, the values which I entered earlier will appear on the selection screen. My requirement is... If I come BACK from the output screen to the selection screen, the selection screen should be blank. I mean, all the values I entered earlier should be cleared. Could anyone please tell me how to do that.
    Thanks in advance.
    Best regards,
    Paddu.

    Hi Paddu,
    the selection screen will be reinitialized automatically. Only if the INITIALIZATION event or the parameters use SET/GET parameter IDs (addition MEMORY ID pid) the values will prevail.
    You may clear everything in INITIALIZATION event.
    Regards,
    Clemens

  • Username tab blank on logon screen after locking the system

    Two Windows Server 2012 R2 Domain Controllers in the environment.
    All machines are running Windows 7 Enterprise.
    There are separate group policies for IT Team and User team.
    On user computer when they lock the machine and press CTRL+ALT+Del the user name field is blank.
    On IT computer when they lock the machine and press CTRL+ALT+Del the user name field has current logged on user.
    I am unable to located the group policy that will cause this behavior.
    Please advise.
    The  below articles discuss the issue however none of the resolution worked.
    How to Display User Information or Not when a Windows Session is Locked
    http://www.sevenforums.com/tutorials/182700-lock-computer-screen-display-user-information-not.html
    How to Make Windows 7 Require a User Name and Password in Log On Screen
    http://www.sevenforums.com/tutorials/61650-log-user-name-password.html

    I would agree with Vivian.
    To identify which GPO is updating this setting, you can use rsop.msc
    or gpresult.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Firefox 4.0 will not open at all. It shows that the process is running in the task manager but will not open the window even after closing the prcess and restarting.

    I have had firefox since an earlier 2. version and have been able to upgrade as normal. After the installation is done it will not open at all. I have restarted and even uninstalled all previous version .exe and still nothing. I am using windows 7 OS. I am still running 3.6.8 and would love to see the new one running on my laptop.

    hello, this crash is caused by Websense Endpoint security software that is running on the system. please try to install all the updates for this program that are available...

  • HT201412 Does not return to the Home screen after pressing the Home button

    My home button it's not works after pressing If I press it hard many time it's work but sometime not working at all. Can any apple store fixed this problem in any apple store at any country cause I purchased from apple stroe in Brighton and I live in Kuwait .. So please help me with this problem
    thank you for listen

    Check the following:
    1. Check credit card number
    2. Check security code
    3. Billing Address must be the same as credit card
    4. Check expiry date
    5. Make sure you have sufficient fund

  • Portal Run time error after changing the logon screen

    Hi all,
    I am running an EP7 SP08 and I try to change the logon screen as described on:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
    I copied the 'com.sap.portal.runtime.logon.par.bak' file, renamed it to 'my.new.logon.par'. after that I extracted the file with winzip. I opened the directory 'PORTAL-INF\lib\' and there I extracted the file 'umelogonbase.jar' with winrar. I opened the  file 'logonLabels_en.properties' and changed the entry 'xtit_WELCOME=Welcome' to 'xtit_WELCOME=blablabla'.
    I repacked the umelogonbase.jar with winrar again and after that I repacked the 'my.new.logon.par' with winzip again.
    Then I placed the par file back at '<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd' and changed the authscheme.xml with the new par file and changed the 'login.authschemes.definition.file'  all described on the help.sap.com url mentioned above.
    However, when I restart the portal and open the logon screen I see the error message:
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    The exception was logged. Inform your system administrator..
    See the details for the exception ID in the log file
    The default trace shows the following message:
    An error occured during authscheme computation.
    [EXCEPTION]
    com.sapportals.portal.prt.component.PortalComponentException: Error in init method
    Component : my.new.logon.certlogon
    Is there anyone who knows what goes wrong? The description on help.sap.com is very straightforward but still it doesn't work for me...
    Any help would be appreciated.
    Kind Regards,
    Nico van der Linden...

    Hi,
      Check if you did the following steps pertaining to the authschemes.xml file:
    --> Download the authschemes.xml to local drive. Rename the file to,say, authschemes_new.xml
    --> In authschemes_new.xml, did you change <b>all</b> entries of com.sap.portal.runtime.logon with the name of modified logon par file?
    -->Upload the authschemes_new.xml file using configtool; and, change the property login.authschemes.definition.file to authschemes_new.xml in configtool.
    -->Finally,restart your portal. Hope it helps.
    Regards,
    M.Subathra

  • I can't see the cursor on the logon screen with my MBP when using it in bright sunlight.

    I have a 15 inch MacBook Pro with an anti glare screen.  I am running Lion 10.7.3.  
    It is being used in bright sunlight in southern greece very sucessfully apart from the fact I cant see the cursor on the logon screen to select the user I want to log in as. .
    Setting the cursor to a larger size using the universal access options works really well once I have logged in but at the moment I have to dash for the nearest shade to be able to see the screen to log in.
    Any suggestions?    A key sequence to swap between users on the logon screen would do (there are only two) 

    If you're using it in bright light, you may be getting sunlight through the back of the machine which can wash out the display.  The Apple logo on the back of the lid is actually a cut-out that uses the systems back light to make it glow.  Bright light (especially sunlight) can actually shine through the back.  As the users in the login are typically in the middle of the display, this is the area most likely to be washed out as that is where the Apple logo is.  You can try just putting your hand over the Apple logo on the back to block the sunlight when trying to log in.

  • Powering up after closing the screen

    Ok so this is somewhat of a odd question I know but please hang in there. So I have a rental MPB and well it is generally crappy. I am having some issues with it that are so infuriating that there are times I just want to throw it out the window. So as I said it is a rental and I have been keeping it booted into Windows 7 via bootcamp because I have a better MBP and I like usign that in OSX. Additionally, there are a suite of programs that I need to run on a frequent basis, about 3-7 or more times a week and it is a pain to keep booting into windows and back on my other computer and additionally I am not a huge fan of keeping parallels running all the time and booting that up takes just about as long as an entire reboot. So now the rental MBP is what I think a 2009 model and it has an Intel Core2 Duo 2.26GHz and 2GB RAM and is running a 64-bit OS. I have the setting configured on the MBP in windows 7 enterprise to put the computer to sleep when I close the lid. Now my problem is I am having the hardest time waking the computer sometimes. I regularly cannot get the screen to come on or the computer to wake and am forces into hard shutdown and reboot. How can I avoid this? I need to be closing the lid often and opening it because I am very mobile with the labtop and need to transport it. I know it goes to sleep by the glowing light on the front, but when I open the screen it goes off and the screen just stays black. I cannot get it to show the login screen after sitting and just pressing and and all of the keys on the keyboard. Is there any way to aid in waking this computer, am I experiencing this problem because I am using bootcamp?
    P.S. all of the apple software is up todate I have been checking reguraly.

    You're probably experiencing the problem because of the defective GPU on the 15" mid-2010 models. While it's a repair that Apple will fix for nothing, since the computer doesn't belong to you I don't see that there's anything you can do about it - complain to the rental company about not having the problem 'fixed' I suppose.
    Just for your edification - http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US.
    Sorry that I can't give you any real 'tips' about how to solve your problem...
    Clinton

  • Give us a way to get rid of the Home View screen after closing last document

    After closing the last open document, a new window pops up. Please let us disable this. It's bad in a production environment, gets in the way.

    Hi Aditya
    By default, OPA 10.4 will collect the minimum amount of information needed to answer the goal of your interview and then display the answer and the reasons for the answer.You can change what appears on these screens within OPM itself (you don't need to change those settings).
    So I would:
    - add a Summary Screen to your project (if you haven't already)
    - add <your goal attribute> to your summary screen. This will display as a link if the goal is unknown and as a sentence showing the outcome and a Why? link when it is known. 
    - add a label to the summary screen, providing information about the outcome (eg "Congratulations you are eligible") or simply show the value of the outcome (eg Your total deduction is %deduction_amount%). 
    - use visibility rules to control which items to display at the start/end of your interview (in your case, maybe hide your goal once it is known and show your label once your goal is known). See OPA help topic "Tutorial: Hiding and displaying summary screen elements".
    The Inferred Brand Discount sample supplied in the OPM install provides an example of this (see Help topic Sample Rulebases for information on how to open this).
    Hope that helps,
    Fiona

  • I have customized my Firefox toolbar. After closing the browser and then reopening it, the toolbar has returned to the way it was before I customized it. How do I get my customization of the toolbar to become permanent?

    I have customized my Firefox toolbar several times. After closing the browser and then reopening it, the toolbar has returned to the way it was before I customized it each time. How do I get my customization of the toolbar to become permanent?
    It has occurred with Firefox 4.0.1 and 5.0

    see http://kb.mozillazine.org/Corrupt_localstore.rdf
    Take a picture of your toolbars so you can easily reconstruct them from the default after solving the the problem.
    If it happens to you it will probably happen again in the future so you might want to keep some copies of your modified localstore.rdf file so you can delete the bad one and rename one of the replacements in waiting. Saving, copying and renaming must be done with Firefox down, of course.

  • I have an ipod touch 8gb model number MA623LL. How do I install apps on my ipod? Is it capable of transferring/running apps? Why doesn't my ipod touch have the basic-beginning app on the beginning screen after i erased/wiped my ipod and started new?

    i have an ipod touch 8gb model number MA623LL. How do I install apps on my ipod? Is it capable of transferring/running apps? Why doesn't my ipod touch have the basic-beginning app on the beginning screen after i erased/wiped my ipod and started new?

    Googling shows that you have the 1G iPod.  For apps you need at least iOS 2. The iG can go as far os 3.1.3 that you get here:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    Just be aware that there are presently not that many apps that work with a 1G with iOS 3.1.3

  • ITunes 10.5.3 restarts itself after closing the program. How do I fix this?

    iTunes 10.5.3 restarts itself after closing the program. How do I fix this?
    Windows 7 64bit Ultimate
    iTunes 10.5.3 64bit

    I've had this problem on my Windows XP for years. it's been around, unsolved, or no solutions in these forums.
    It keeps reminding me why Apple will never be the primary office computer company. Anyone running a business cannot have software running that will not behave, won't shut down, or behaves without any explanation, and this problem has no explanation, or solution that I can find except to use task manager to kill the process and only use iTunes when I'm expecting to shut down or kill the process.

  • Accidentally exited out of the loading screen after making my purchase, should I retry or how do I check if the payment went through?

    Accidentally exited out of the loading screen after making my purchase, should I retry or how do I check if the payment went through?

    check your account, https://www.adobe.com/account.html

  • How to enable the screen after triggering the error message

    Hi All,
    we have a tcode IW31, in that one field(WBS element -PROID) is not mandatory. so we have written the following code to make it mandatory in a user exit EXIT_SAPLCOIH_010.It's triggering the error message, but it is going into disable mode. Please sugget me how to enable the screen after getting the error message triggering.
    if not caufvd_imp-proid is initial.
      select single * from t350 into wa_t350
              where  auart    = caufvd_imp-auart
                and  imord    = 'X'.
      if sy-subrc is initial.
        pspel = caufvd_imp-proid.
      else.
        call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
             exporting
                  input  = caufvd_imp-proid
             importing
                  output = l_posid.
        concatenate text-t10 l_posid text-t11
                    into l_textline1 separated by space.
        message i208(00) with l_textline1.
      endif.
    else.
      message e208(00) with 'Please maintain WBS element in Location Tab'.
    endif.
    Thanks

    Hi,
    Instead of error message use status message like
    message s208(00) with 'Please maintain WBS element in Location Tab'.
    Leave to screen sy-synnr.
    This will allow to move to the screen and have in enable mode.
    WIth Regards,
    Dwaraka.S
    Edited by: Dwarakanath Sankarayogi on Feb 13, 2009 7:46 AM

Maybe you are looking for