How to avoid the objects dependency in the packages by standard settings?

Hi,
How to avoid the objects dependency in the packages by standard settings?
Example Scenario -> Our project uses two packages u2018ZZP1u2019 and u2018ZZP2u2019 for developments in the system u2018SN1u2019. We created a domain u2018ZZ_DO_TESTu2019 in the Package u2018ZZP1u2019. Now we have to make sure that the developer should not use or refer domain u2018ZZ_DO_TESTu2019 for the developments in the package u2018ZZP2u2019.
u2026Naddy

Evevn i felt that in the CTS at least a warning can be given if the included objects refer to any other object(s) which arre:
1. Local Objects
2. Locked under other requests,
3. Lastly able to detect cyclic dependency as in we had a situation where we had a program locked in request A which calls an FM locked in request B. Now Request B refers to a message which is locked in request A.Since it was a message it gave only requrn code 4 in transport and transport ended with warnings. But if it is some other object then it is going to give compile error in at least one transport and neither can be moved without the other.
Anyways, i will check the BAPI he has mentioned and see if any workaround can be done,
Request: Please keep the post active until we arrive at a good solution,Thanks.

Similar Messages

How to get the Purchase order Qty in the object dependency

Hi,
We are using variant pricing in the purchase order. I have condition type say u201CZVBPu201D for Pallet cost. I defined Pallet cost as 5 USD per each (pallet). I have to calculate Number of pallets = Purchase order Qty/ 5. The number of pallets should be rounded to nearest integer.
My question is how to get the Purchase order Qty in the object dependency?
Is there any reference table and field can be used to get Purchase order Qty just like we use MMCOM-VKOND for variant pricing.
Appreciate your help
Thanks,
Srini

Hi,
1. I do not have system now so I can not conclusively tell about table field .
2. Since I did it long back so I also do not exactly remember it, there are more than one place where PO qty appears for example Item overview and Item details - one of the PO qty when used in the characteristic do pull the PO qty which can be used for variant pricing (so request to please update the forum with the correct table and field once you find it - in the meantime if I get opportunity to get to system I will also try and find out ).

Example of generating excel dynamically in ssis? geting error [Excel Destination [190]] Error: Opening a rowset for "Excel_Destination$" failed. Check that the object exists in the database.

example of generating excel dynamically in ssis? geting error [Excel Destination [190]] Error: Opening a rowset for "Excel_Destination$" failed. Check that the object exists in the database.

Hi Vijay
Can you be little bit more specific, did you receive this error when you are designing this pacakge using BIDS
Becuase when you are designing this pacakge in BIDS, you need to manaually create a excel sheet manually for the first time you run,
are you creating excel sheet using execute sql task and excel connection with input from a variable?
Did you receive this error in validation phase or execution phase ?
Can you share your query to create table in excel ?
http://sqljunkieshare.com/2012/02/28/how-to-create-and-map-excel-destination-dynamically-in-ssis/
Use the above post

Error : Opening a rowset for "Sheet$" failed. Check that the object exists in the database.

Hi,
i am trying to load the data from excel sheet using For each loop container in ssis 2005.
But it gave me the below error:
Error: Opening a rowset for "Sheet1$" failed. Check that the object exists in the database.
[DTS.Pipeline] Error: "component "failed validation and returned validation status "VS_ISBROKEN".
Error: There were errors during task validation.
Could you please let me know the solution
Regards
Sqlstud

That message usually means validation has failed;
Have any of the underlying tables changed? Data types, lengths, maybe even column ordering, etc...?
try this..
Right-click on the Data Flow Task and select Properties. Then set DelayValidation =TRUE.
Let us TRY this |
My Blog :: http://quest4gen.blogspot.com/
Thanks ETL.
Everything is fine..(Datatypes,length,orderings etc)
Already i have set
DelayValidation =TRUE.
IS there any other problem?
Regards
Sqlstud

Is there any ways to find the object that triggered the keyevent

i am having difficulty in this part of keyevent iam almost struck here i want to know is there an possibility to find the object that triggreed the keyevent

hi!
getSource() method returns the suorce object

Excel Source - Opening a rowset for "EFT$" failed. Check that the object exists in the database.

Why oh why do I sometimes get this error when defining my Excel Source and then sometimes I do not?
Am I doing something wrong here???
The error is...
Exception from HRESULT: 0xC02020E8
Error at Data Flow Task [[Excel Source[27]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error at Data Flow Task [Excel Source [27}}: Opening a rowset for "EFT$" failed. Check that the object exists in the database.
I know the Worksheet "EFT" exists because I defined this previously for the same Excel spreadsheet.
Thanks for your review and am hopeful for a reply.
PSULionRP

A reply from CozyRoc must be hitting the nail on the head
sheet name contains $
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ce0fbff5-f5f1-4a4a-9c29-6adc32b0fd79/using-excel-file-as-source-in-data-flow-task-of-ssis-bi-2005-need-example-of-sheetnamecellrange?forum=sqlintegrationservices
Arthur My Blog

Is there a way to dock the object toolbar to the top menu bar?

I am trying to get as much screen real estate as I can. Is there a way to dock the object toolbar to the top dock areabar? Ideally i would like to place it under the main options bar.
I have tried everything I can think of to do this. It seems like I am missing something easy to make this happen.
Along the same lines it would be great if you could place the timeline across the entire bottom of the Captivate window with any of your other docks above it. I don't need that much room for the other dock, but a wider timeline bar would be fantabulous. Docking the timweline to the top would work as well.
Thanks
David

Do you want the workspace to look in this way? :
You just need to drag the object toolbar, towards right and move that near to the toolbar.
Same goes for Timeline and other Pods.
I used classic workspace and just dragged and moved the pods to the desired positions, you can save that workspace after making changes.
Thanks.

How can I avoid rendering objects outside of the page?

Hi,
I have a few big objects in my webpage that stretch the boundaries of the page in preview mode. How can I avoid rendering those parts that are off the page?
Thanks,
Hadi

Hi Hadi,
You need to resize the image to fit the page to avoid it rendering outside the page.
Regards,
Aish

How to avoid one active session for the same user account concurrently

Hi all ,
i am using model 1 architecture in my application.
in my application ,if one user login through 2 browser at a time ,he can do it.
But now ,i want to close first browser or redirect him to a exception page.
plz guide me how can i do it.
plz include case1.
what happen if he close page ,not logoff
case2
what happen if power cut happen on client side.

+You can use a column in the table to check the current user logged in status. Once the user gets logged in the application change the flag at the backend. In this way you can know whether the user is already logged in the apllication or not, and based on this you can show a proper message to the user.+
+If the user closes the browser window without logging off the application, then in this case you can use the session Listoners.+
Well not the right approach Listeners would it for you.For browser closure problem.If user does that automatically container destroys the session object as per configured session-timeout.
*@OP*
Problem 1:
Try to a write an implementation of sessionListener / sessionAttributeListener (for having a check on user loggins and apply a global filter which checks available users who have already logged in)
Hope the below thread might give you some idea of how to go about.
http://forum.java.sun.com/thread.jspa?threadID=5226527&messageID=9922478
Problem 2:
consequently configure session-timeout parameter in minutes under web.xml for session browser close and inactivity state problems.
REGARDS,
RaHuL

How to execute a procedure depending on the result of a query?

Hello, I'm new in ODI.
I want to execute a procedure depending on the result of a query Oracle table.
We have a Oracle Table whit a column that contains two possibles values.
I want read the table, row by row, and depending on this value, execute a Procedure or execute another.
How can i do?

what you need to do is
1. create a variable which "new_var2" which has the count of the number of rows you want to process. must be data type numeric.
2. copy "new_var2" to the package screen.
3. duplicate the "new_var2" on the package screen and evaluate the variable and test for "> 0" zero, call it "new_var2_E"
3. create a new odi variable "new_var1" with a refresh of "select field1 fom (select field1,rownum as rownumber from tablex) where rownumber = #new_var2" in the relevant schema and technology.
4. copy "new_var1" into your package (some where in the flow)
5. right click the "new_var1" variable in you package screen and you should get the option duplicate step (click on that)
6. select the the duplicate "new_var1" on the package screen and correct the the name to something meaning full to you "new_var1_E", also change the "type" to "evaluate variable" then you should see a "value" box. enter one of the values you want to test in the box (remember do not put in quotes ' )
7. now back on the package screen join the "new_var1" to the "new_var1_E" with an OK line
8 you now join "new_var2" to "new_var2_E" with OK
9 you join "new_var2_E" to "new_var1"
10. you then join the "new_var1_E" with an OK or a KO line to the relevant procedure.
12. you need to duplicate "new_var2" in the package screen one more time this time and call it "new_var2_D" set the type to evaluate and then select the increment of -1
13. the relevant procedure to "new_var2_D" with an OK
14. join the "new_var2_D" to the "new_var2_E" with an OK
15. this should close off the loop now the exit point is "new_var2_E" with a KO line to the next part of your process....
Basically you should end up with a loop on new_var2 decementing, and it is used to get a specific next record row from your table.
Hope this helps, sorry it is a little long winded..
Edited by: DavidGD on Feb 8, 2009 3:29 PM

How to avoid withholding tax posting in the case of ERS

Hi
We are trying to process Rent using Frame work Order.
The issue here is withholding tax codes maintained for other purposes like Professional Fee, etc in the vendor master gets picked up automatically in this Rent invoice and the relevant WH Tax postings are made in the accounting document.
Being ERS and usage of T code MRRL, the invoice generation is automatic instead of manual MIRO. Hence, user has no control to deselect withholding tax codes while generating invoices.
Appreicate any suggestions how to avoid this?
OR
Is there any way of posting rent using frame work order instead of ERS (ie MRRL)?
Please let me know if I m not clear.
Thanks
Sridevi
PS: In Spain, there is no WH tax on Rent

Hi,
Assign a new Accounting Document to T. Code "MRIS" in OMR4.
First create a new Document Type
Then Assign Document Types in Invoice Verification
Now go to OBBH - Substitution in Accounting Documents and write substitution for this new FI Doc Type and T. Code MRIS. Here take help of your FI consultant.
You can use field XREF3 - Cash Flow, and keep constant vale for this as "Blank" since it is Relevant with Cash Flow.

How can I set the Object Name to the file name on import?

All-
I've been manually typing the filename into Aperture's Object Name metadata field. Is there a way to do this automatically? I use metadata presets to fill in many other fields on import but haven't found a way to set metadata fields on a file-by-file basis.
Perhaps there's a way to do this with the thousands of images already in my library as well...
Thanks,
Andreas

Here's the cleaned-up version:
tell application "Aperture"
set selectedImages to the selection
repeat with i in selectedImages
set tName to name of i
set value of IPTC tag "ObjectName" of i to tName
end repeat
end tell
Some other related bits, which you can probably work out how to put into the above script:
Find out the AppleScript names of the IPTC tags (but only tags which have a value for that image), the names will be listed in the 'result' pane in the Script Editor:
tell application "Aperture"
set selectedImages to the selection
get name of every IPTC tag of item 1 of selectedImages
end tell
The same for EXIF tags:
tell application "Aperture"
set selectedImages to the selection
get name of every EXIF tag of item 1 of selectedImages
end tell
And for any custom tags you have set up. If you haven't set up any custom tags (one of my main reasons for going with Aperture) this will just return camera and picture time zones:
tell application "Aperture"
set selectedImages to the selection
get name of every custom tag of item 1 of selectedImages
end tell
Finally, keywords:
tell application "Aperture"
set selectedImages to the selection
get name of keywords of item 1 of selectedImages
end tell
To grab the first keyword name try 'name of keyword 1 of...' etc.
To grab the parent keywords for hierarchical keywording stuff try experimenting with 'get parents of keywords of'. The keywords seem to be read-only from AppleScript, so a magic script that added all parent keywords doesn't seem to be possible.
Ian

How to create an object alive all the time on a server side

Hi,
I work on an Intranet with J2EE technologies. I need an object to do several tasks in background on the server side. Like start scheduled processes on a database and files, stocked on the server. What is the way to do this. I thought to use the JNDI by declaring the object in the Deployement Descriptor, and to manage a timer within.
I don't know if this works.
Anyway, my question is how to create an object on the server that is ALIVE ALL THE TIME and visible by the other objects running in the same VM.
Thank's.

This may not be the correct design, but I had success doing the following:
1. Create an Stateless EJB that does a task, i.e. update a database table.
2. Create a subclass of java.util.TimerTask to call the EJB methods.
3. Kick off the TimerTask from a servlet.init method.
Seems to work pretty well to do scheduled tasks, such as refreshing lookup tables. I would imagine the same could be done with an MBean, but I haven't had time to fully understand JMX yet. (It's on the list).
As for event driven procedures, that can be done through a servlet interface.
You may also wish to review a scheduler here: http://www.part.net/quartz.html. Note, I have NOT even looked at it yet, so I have no clue if it's any good. But, it is on my list of tools to evaluate (that's a long list) someday when my head's above water. Have a look, and caveat emptor.
Hope this helps,
Perry Tew

How to Avoid another Black X Over the Battery?

Forgive me if this is already a topic. If so, please direct me to the correct thread.
I was recently working on my Late 2010 Macbook Pro 13 inch laptop when it just shutdown. It took about 5 minutes to start back up, and I immidatley noticed that there was a black X over the battery symbol, and the fan was running at a full (and a very loud) speed. I shut it down and plugged in the power cord, which only glowed very faintly.
After some googleing, I figured out what was wrong and fixed it using a different thread. I basically had to restart the SMC. The thread I used is here: http://support.apple.com/kb/HT3964
However, even though it helped me fix the problem, it didn't answer any questions. So, if you could please help me. Why did this happen to my Mac? How did resetting the SMC fix the problem? How can I avoid this problem in the future? Is this an issue with the battery, or is it something else?
I want to know what I did to make this happen and how to avoid it in the future, if it's possible. All input is appreciated. I am not very computer savy when it comes to the inner workings, so I'm hoping someone smarter than me can help me understand what just happened with my computer.
Thanks!

An SMC reset can 'fix' several battery issues -
A portable Mac doesn't appear to respond properly when you close or open the lid.
The computer sleeps or shuts down unexpectedly.
The battery does not appear to be charging properly.
The MagSafe power adaptor LED doesn't appear to indicate the correct activity
- but I've no idea why you had your problem in the first place, so I can't tell you how to avoid it in the future. Maybe you let your battery drain completely down? I don't know - but now you know the 'fix' for it should it happen again.
Clinton

Programmtically Scaling the front panel objects depending on the Dispaly card resolution.

I have programmed my application in dispaly resolution of 1024 by 768. I want to deploy the same code on a machine having a resolution of 800 by 600. how do i scale down my front panel objects to 800 by 600 resolution .
I want to do it programmatically.
Suresh Thangappan

To get best control, you will need to do it programmatically. Using the property nodes, all controls can be moved and resized. Resizing is problematic, however, because there is no single method that works for all controls. The top level Bounds property is read-only. It should be used to make sure whatever you did to change the size resulted in the size you expected. You will need to search the control–specific properties for the one which resizes your control of interest. For example, the Plot Area.Size property changes the size of a Waveform Graph.
You can link one control to the size of the panel and have it scale automatically. Do this by selecting the object, then selecting Edit>>Scale Object with Panel. I typically use this for the main object on my panel. The rest of the objects are then moved around the rescaled object, but not rescaled. You will have to rescale them yourself, and move them again if you do not like the position. You will probably want/need to change font sizes on numerics.
What you are trying to do is possible, but it is also tedious. Good luck! Let us know if you still have problems.
This account is no longer active. Contact ShadesOfGray for current posts and information.

How to avoid the objects dependency in the packages by standard settings?

Similar Messages

Maybe you are looking for