How to avoid the prompt when verifing signature?

I sign the doc with my cert.
The cert is not trusted by Acrobat/Reader itself so when i try to verify the signature Acrobat/Reader will prompt the user cert is not trusted.
My question is how to avoid this prompt through Acrobat SDK or how to add my cert to trusted cert list through Acrobat SDK?
Thanks.

Patrick Leckey wrote:
You will also see the BER Decoding error when you have a self-signed peer-to-peer cert in your Windows Cert Store, even if it is not the signature you are using to sign.
Start > Run > certmgr.msc
Look for any certs that have "peer-to-peer" in the Intended Purpose column
Remove that cert
Restart Acrobat
Give that a shot.
Patrick,I have not found the Intended purpose of cert names "peer-to-peer".
But I have just found the cert which will cause the signature failure.
The key is the cert can not be removed.
I'm very curious that why a cert has no relationship with the signature could cause the signature failure?
Is it a BUG of Acrobat/Adobe Reader?
If not how can i operate successfully?
Thanks.

Similar Messages

How to avoid the dialogue when converting from context menu

This is a follow-up to http://forums.adobe.com/message/2016146#443364 which was locked due to a bug.
i would like to know how i can avoid the 'save as' dialogue when using the context menu to convert a word file to pdf using windows XP/acrobat 8/word 2007.
so far, it always prompts me for the filename, which is annoying as it does not allow me to batch-convert several files and let the thing run its course.
the solution provided by Steve in the other thread does not work - even if the plugin from word does not propt for a filename, it still does when triggered from explorer/context menu.
so back to square one: how to avoid that dialogue when not opening word at all?
cheers, thanks for any help. michael

For a permanent change, START>PRINTERS>right click on Adobe PDF printer and select properties>General>Printing Preferences>Adobe PDF Settings. Under the settings tab, uncheck the box related to asking for a name. Pretty sure that is the location, but it may vary with version.

How to avoid login prompt when viewing reports

Hello,
I am trying to access a report that I have put in the shared reports folder
I have copied the URL, see below, from the copy shortcut link.
However I am being prompted for a User name and password
http://server:port/OracleBAM/12345/reportserver/default.jsp?Event=viewReport&ReportDef=6&Buttons=False&ReportParameters=()
Can you please advise
a) If I can bypass or default a username and password in the URL
b) If the above is not achievable then do I need to set up each person, viewing the report, with a username and password and somehow pass these credentials in with the URL.
Thanks in advance,
Kevin

Hi Kevin,
I am sure its too late to post a reply for this question but it will be useful for others.
Yes, you can bypass the login prompt by implementing SSO to the BAM with a default username/password.
You can write a simple java code to simulate the process of submitting a login form, thus allowing users to access weblogic protected resources, like BAM report URL, without re-entering the username and password in the login page.
You can use HTTP client API to simulate Form Based HTTP Authentication. It will have to first post HTTP request to authenticate default user 'weblogic' and then from HTTP response get the cookie and pass it to the subsequent HTTP request (with the report URL) to access protected resource.
I had the same requirement and it worked for me :).
Thanks
Jahangir Pasha
Edited by: Jahangir Pasha on Mar 28, 2013 12:40 AM

How can avoid the problem of Parameter Prompting when I submitting ?

I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
   1. using System;
   2. using System.Collections;
   3. using System.Configuration;
   4. using System.Data;
   5. using System.Linq;
   6. using System.Web;
   7. using System.Web.Security;
   8. using System.Web.UI;
   9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22.     CrystalReportViewer crViewer = new CrystalReportViewer();
23.     //CrystalReportSource crsource = new CrystalReportSource();
24.     int nItemId;
25.
26.     protected void Page_Load(object sender, EventArgs e)
27.     {
28.         //Database Connection
29.         ConnectionInfo ConnInfo = new ConnectionInfo();
30.         {
31.             ConnInfo.ServerName = "127.0.0.1";
32.             ConnInfo.DatabaseName = "Xcodf";
33.             ConnInfo.UserID = "HR777";
34.             ConnInfo.Password = "zghshshs";
35.         }
36.         // For Each Logon parameters
37.         foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38.         {
39.             cnInfo.ConnectionInfo = ConnInfo;
40.
41.         }
42.
43.
44.
45.
46.
47.
48.         //Declaring varibles
49.          nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50.         //string strStartDate = Request.QueryString.Get("StartDate");
51.         //int nItemId = 20;
52.         string strStartDate = "23-JUL-2010";
53.
54.         // object declration
55.         CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56.         CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59.         TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61.         // new report document object
62.         ReportDocument oRpt = new ReportDocument();
63.
64.         // loading the ItemReport in report document
65.         oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67.         // getting the database, the table and the LogOnInfo object which holds login onformation
68.         crDatabase = oRpt.Database;
69.
70.         // getting the table in an object array of one item
71.         object[] arrTables = new object[1];
72.         crDatabase.Tables.CopyTo(arrTables, 0);
73.
74.         // assigning the first item of array to crTable by downcasting the object to Table
75.         crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77.         dbConn = crTable.LogOnInfo;
78.
79.         // setting values
80.         dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81.         dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82.         dbConn.ConnectionInfo.UserID = "HR777";
83.         dbConn.ConnectionInfo.Password = "zghshshs";
84.
85.         // applying login info to the table object
86.         crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93.         crViewer.RefreshReport();
94.
95.                 // defining report source
96.         crViewer.ReportSource = oRpt;
97.         //CrystalReportSource1.Report = oRpt;
98.
99.         // so uptill now we have created everything
100.         // what remains is to pass parameters to our report, so it
101.         // shows only selected records. so calling a method to set
102.         // those parameters.
103.      setReportParameters();
104.     }
105.
106.     private void setReportParameters()
107.     {
108.
109.         // all the parameter fields will be added to this collection
110.         ParameterFields paramFields = new ParameterFields();
111.          //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112.        //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114.         // the parameter fields to be sent to the report
115.         ParameterField pfItemId = new ParameterField();
116.         //ParameterField pfStartDate = new ParameterField();
117.         //ParameterField pfEndDate = new ParameterField();
118.
119.         // setting the name of parameter fields with wich they will be recieved in report
120.
121.         pfItemId.ParameterFieldName = "RegionID";
122.
123.         //pfStartDate.ParameterFieldName = "StartDate";
124.         //pfEndDate.ParameterFieldName = "EndDate";
125.
126.         // the above declared parameter fields accept values as discrete objects
127.         // so declaring discrete objects
128.         ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129.         //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130.         //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132.         // setting the values of discrete objects
133.
134.
135.           dcItemId.Value = nItemId;
136.
137.         //dcStartDate.Value = DateTime.Parse(strStartDate);
138.         //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140.         // now adding these discrete values to parameters
141.           //paramField.HasCurrentValue = true;
142.
143.
144.
145.           //pfItemId.CurrentValues.Clear();
146.          int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147.           pfItemId.Name = valueIDD.ToString();
148.
149.         pfItemId.CurrentValues.Add(dcItemId);
150.         //ParaLocation.ApplyCurrentValues;
151.         pfItemId.HasCurrentValue = true;
152.
153.         //pfStartDate.CurrentValues.Add(dcStartDate);
154.         //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156.         // now adding all these parameter fields to the parameter collection
157.         paramFields.Add(pfItemId);
158.
159.         //paramFields.Add(pfStartDate);
160.         //paramFields.Add(pfEndDate);
161.         /////////////////////
162.         //Formula from Crystal
163.        //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164.         crViewer.RefreshReport();
165.         // finally add the parameter collection to the crystal report viewer
166.         crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170.     }
171. }

Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

How to avoid the transport request popup when changing real-time load behav

Hello experts,
I'm often switching between the two loading mode, and I already worked in systems where I don't have the popup for transport request : (so I guess there is a possible tuning anywhere)
How to avoid the "asking for a transport request" popup in BW when changing real-time load behaviour of an infocube
Thanks in advance, I will save precious time
Guillaume P.

Hello Krishnan,
i tried to switch all object types from "not changeable" to "changeable original", but still get the popup when switching cube loading mode.
Do you know the particular object type to manage ?
Hello Vishnu,
same thing, whatever the option is (switch on / off standard) I have the transport popup.
Anyway thanks for your try.

How to avoid the dtd validate of the "iTunes Music Library.xml " when read?

Hi all,
In the article of What are the iTunes library files?("http://docs.info.apple.com/article.html?artnum=93732" ),there is something about the function of "iTunes Music Library.xml " of iTunes.I can get information by reading this xml file.But this file must be validated online(dtd validate).When the net is unconnected,the web exception may be threw.How to avoid the dtd validate of the "iTunes Music Library.xml " when read?Thank you.

You can do this with YamiPod (Free)
http://www.yamipod.com/main/modules/downloads/
Or manualy:
Here is a link to where it tells how to do this manualy:
http://discussions.apple.com/message.jspa?messageID=797432#797432

How to avoid password prompt in shell script for zip password protection

Hi
I am trying to set password protection to my oracle database export backup. Once the backup completed, it should compress with a password protection. Thats the plan. Initialy we were using the gzip for the compression. Then realized that there is no password protection for the gzip. Started using zip option. I tried using
zip -P <password> filename
But it was throwing below error.
-bash-3.2$ zip -P expreports REPORTS_2013FEB14.dmp
zip warning: missing end signature--probably not a zip file (did you
zip warning: remember to use binary mode when you transferred it?)
zip warning: (if you are trying to read a damaged archive try -F)
zip error: Zip file structure invalid (REPORTS_2013FEB14.dmp)
Not quite sure why.
Then I used zip -e REPORTS_2013FEB14.dmp.zip REPORTS_2013FEB14.dmp
But this prompting for the password. As I am trying to put the command in the script. It will be tough if it prompts for the password.
I would like to know how to avoid the password prompting by saving somewhere or how the code should be written. Tried using expect feature of shell script. Below was the code I tried. It didnt work.
[oracle@SF40V6636 test]$ cat repexp.sh
zip -e REPORTS_imp.log.zip REPORTS_imp.log
expect "Enter password:"
send "imprep"
expect "Verify password:"
send "imprep"
So please help in avoiding this password prompt or let me know how to change the code.
Thanks
SHIYAS M

How about using gpg and adding a secret key to the requirement of a password? No one should be able to decrypt your file, not by knowing only the password.
1. Generate a public and private key pair:
$ gpg --gen-key
When it shows "We need to generate a lot of random bytes…" open another terminal session and type "dd if=/dev/sda of=/dev/null" to create traffic. When the public and secret key created and signed you can Ctrl-C the dd command.
To see what you have created:
$ gpg --list-keys
2. Encrypt and gzip your stuff:
$ tar zcf stuff.tgz file_or_folder
$ gpg recipient "Some Name" encrypt stuff.tgz
$ rm -f stuff.tgz
3. Decrypt and extract the archive:
$ gpg batch yes --passphrase "password" -d stuff.tgz.gpg > stuff.tgz
$ tar zxvf stuff.tgz
Again, knowing the password alone will not let anybody decrypt your stuff.

How to use the prompt value in the report column

Hi
I have a report prompt column which is 'Adj Type' which holds values 10,20,30 and when user selects Adj Type = 10 then this value should be passed to report column.
For Eg. Column 1 value is 10 and this should multiple with prompt value and the output should be 10* 10.
Any thoughts how to capture the prompt values in report column for calculation.

hi hsekar,
1) Declare a presentation variable in prompt under the Set Variable section -->Presentation Variable -->P_var
2) In Fx Table_name.Your_column * @{P_Var}
@{P_var}{20} ( 20 is default value it will override when a user selects value in prompt
Thanks,
Saichand.v

How to avoid the event has been repeated many times in the background

Application, the main screen is divided into two containers:left and right container,
The right side of the container is divided into two containers:top and bottom container,
There is a button in the left container.
Click the button, the container at lower right will using ModuleManager load Module, The following container load of the right of the screen has been monitoring the container above the action.
Problem:
When you click the button repeatedly to load the container in the lower right, it will create multiple instances, and can not be freed immediately. When the above container do an action or event, there are multiple instances of monitoring exist.
The background will be repeat the action or event many times.
How to avoid the event has been repeated many times in the background?
Thanks

Flex harUI
multiple instances of a mxml, maybe ?

How to avoid the screen of selection output device

Hi all,
Who can tell me how to avoid the screen selection output device when running a smartform.
Best regard.

Hi,
      data: wa_SSFCTRLOP type SSFCTRLOP.
       wa_SSFCTRLOP-DEVICE = 'PRINTER'.
       wa_SSFCTRLOP-NO_DIALOG = 'X'.
       wa_SSFCTRLOP-PREVIEW = 'X'.
    in the function module
   call function '....
   exporting
   CONTROL_PARAMETERS = wa_ssfctrlop
regards,
Santosh Thorat

How to avoid Priner prompt while calling smartform

Hi All,
I am calling smartform FM from my program. I am passing following settings in Output-Options and Control-Parameters:
wa_outputoptions-tddest = 'LP01'. "Printer name
wa_outputoptions-tdnewid = 'X'. "New request
wa_controlpara-device = 'PRINTER'. "Device
wa_controlpara-no_dialog = 'X'. "No dialog
Even after these settings I am getting prompt which asks printer name and other details.
Please tell me how I can avoid the prompt which asks printer name and other settings such as new spool request and print immediately.
Thanks in Advance.
Regards,
Vijay

hi,
try this....
DATA : control TYPE ssfctrlop.
control-no_dialog = ''.
control-preview   = ''.
control-no_open   = 'X'.
control-no_close = 'X'.
CALL FUNCTION 'SSF_OPEN'
EXPORTING
ARCHIVE_PARAMETERS       =
USER_SETTINGS            = 'X'
MAIL_SENDER              =
MAIL_RECIPIENT           =
MAIL_APPL_OBJ            =
OUTPUT_OPTIONS           =
control_parameters       =<b> control</b>
IMPORTING
JOB_OUTPUT_OPTIONS       =
EXCEPTIONS
formatting_error         = 1
internal_error           = 2
send_error               = 3
user_canceled            = 4
OTHERS                   = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to avoid launching Labview when invoking VI by Teststand

Hi, friends.
I'm a learner of teststand. I wrote some VIs by Labview. Now I want to invoke them in teststand environment. But when I run the sequence. Labview will be automatically launched. How to avoid launching Labview when I run the sequence?
Thanks.
Solved!
Go to Solution.

I'm not sure that I follow what you are saying.. But it sounds like when the VI is called, the LabVIEW development software is started and you want to avoid that.
If you create an executable or dll and call that from within TestStand, it should not call the development environment. You would need to have the LabVIEW run-time engine installed on the target PC.
It has been many years since I've used TestStand with LV, so my memory may not be accurate. I think the above had worked for me. However, it seems that I recall something about having the LV code in debug mode causing it to open the development environment.... but it's a distant memory. You're not using breakpoints where the LV VI is being called, are you?
R

How to register the recipient when create job by function

I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
Can you tell me how to register the recipient when create the job.
( in sm36, it is easily to do but how to do in coding? )
regards,
slam

Hi
I think in Back ground using the above fun modules you can't send a mail to the receipient.
see the use of the above fun modules;
IF p_bjob = 'X'.
    CONCATENATE sy-cprog sy-datum sy-uzeit
                INTO jobname SEPARATED BY '_'.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = jobname
      IMPORTING
        jobcount         = jobcount
      EXCEPTIONS
        cant_create_job = 1
        invalid_job_data = 2
        jobname_missing = 3
        OTHERS           = 4.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      IMPORTING
        out_archive_parameters = arc_params
        out_parameters         = print_params
        valid                  = valid
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF valid = chk.
      SUBMIT ybrep
                      WITH < sel Screen>
                      AND RETURN
                      USER               sy-uname
                      VIA JOB            jobname
                      NUMBER             jobcount
                      TO SAP-SPOOL
                      SPOOL PARAMETERS   print_params
                      ARCHIVE PARAMETERS arc_params
                      WITHOUT SPOOL DYNPRO.
      CALL FUNCTION 'JOB_CLOSE'
        EXPORTING
          jobcount             = jobcount
          jobname              = jobname
          strtimmed            = 'X'
        EXCEPTIONS
          cant_start_immediate = 1
          invalid_startdate    = 2
          jobname_missing      = 3
          job_close_failed     = 4
          job_nosteps          = 5
          job_notex            = 6
          lock_failed          = 7
          invalid_target       = 8
          OTHERS               = 9.
      IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        MESSAGE i029 WITH jobname.
      ENDIF.
    ELSE.
      MESSAGE s000 WITH text-003.
      STOP.
    ENDIF.
ENDIF.
Reward points if useful
Regards
Anji

How to avoid the duplicate values, I do not want the duplicate............

i have one database table called "sms1" that table is updated every day or on daily basis it has the following fields in it:
SQL> desc sms1;
Name Null? Type
MOBILE NUMBER
RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)
SNO NUMBER
INDATE DATE
From this table the is one column "RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)" . I am splitting it into different columns like :
SQL> desc smssplit;
Name Null? Type
R VARCHAR2(2 CHAR)
C VARCHAR2(2 CHAR)
S VARCHAR2(1 CHAR)
TC VARCHAR2(3 CHAR)
NA VARCHAR2(3 CHAR)
TC2 VARCHAR2(3 CHAR)
NA2 VARCHAR2(3 CHAR)
TC3 VARCHAR2(3 CHAR)
NA3 VARCHAR2(3 CHAR)
TC4 VARCHAR2(3 CHAR)
NA4 VARCHAR2(3 CHAR)
WTHER VARCHAR2(10 CHAR)
SNO NUMBER
INSERTDATA VARCHAR2(25 CHAR)
Now I am written a procedure to insert the data from "Sms1" table to smssplit table...
CREATE OR REPLACE PROCEDURE SPLITSMS
AS
BEGIN
INSERT INTO scott.SMSSPLIT ( R,C,S,TC,NA,TC2,NA2,TC3,NA3,TC4,NA4,WTHER,SNO)
SELECT SUBSTR(RCSTCNATCNATCNATCNAWTHER,1,2) R,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,3,2) C,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,5,1) S,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,6,3) TC,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,9,3) NA,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,12,3) TC2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,15,3) NA2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,18,3) TC3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,21,3) NA3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,24,3) TC4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,27,3) NA4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,30,10) WTHER, SNO
FROM scott.SMS1 where SNO=(select MAX (sno) from SMS1);
END;
Now in order to update the second table with data from first table on regular basis I have written a job scheduler and I am using oracle 9.0. version...
DECLARE
X NUMBER;
JobNumber NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'scott.SPLITSMS;'
,next_date => SYSDATE+1/1440
,interval => 'SYSDATE+1/1440 '
,no_parse => FALSE
:JobNumber := to_char(X);
END;
Now this job scheduler is working properly and updating the data for every one minute but it is taking or updating the duplicate values also ..like example:
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
Now I do not want the duplicate values to be updated ...and want them to ignore them.....
please I need a help on this query........How to avoid the duplicate values............

Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
         substr(rcstcnatcnatcnatcnawther,3,2) c,
         substr(rcstcnatcnatcnatcnawther,5,1) s,
         substr(rcstcnatcnatcnatcnawther,6,3) tc,
         substr(rcstcnatcnatcnatcnawther,9,3) na,
         substr(rcstcnatcnatcnatcnawther,12,3) tc2,
         substr(rcstcnatcnatcnatcnawther,15,3) na2,
         substr(rcstcnatcnatcnatcnawther,18,3) tc3,
         substr(rcstcnatcnatcnatcnawther,21,3) na3,
         substr(rcstcnatcnatcnatcnawther,24,3) tc4,
         substr(rcstcnatcnatcnatcnawther,27,3) na4,
         substr(rcstcnatcnatcnatcnawther,30,10) wther,
         sno
    from scott.sms1 a
   where sno = (select max(sno)
                  from sms1
                 where sno != a.sno
               ); ---------------> added where clause with table alias.
end;Regards
Etbin

How to reload the screen when changing languages in JavaFX 2?

I'm beginner with javaFX and i need to change language of the screen. but i have no idea how to reload the screen when the language was changed. The application have a button where have the language available. I want just refresh screen when the user change language.
Here is the start method to show the stage.
    @Override
    public void start(Stage stage) throws Exception
        this.stage = stage;
        Locale locale = Locale.getDefault();
        ResourceBundle rb = ResourceBundle.getBundle("resources/Label",locale);
        loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
        root = (Parent)loader.load();
        FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
        controller.setMain(this);
        scene = new Scene(root);
        stage.setScene(scene);
        stage.show();
here is the function to change the language(in the same class with start function),the rb is the new ResourceBundle:
    public void refresh(ResourceBundle rb)
          //change the language here
1. I don't want to use the resourceBundle to get value in resource file and set label in scene one by one.like following:
this.btnLabel.setText(rb.getString(key.test));
2. I don't want to reload the scene,like following:
    public void refresh(ResourceBundle rb)
         try
            loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
            root = (Parent)loader.load();
            scene.setRoot(root);
            FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
            controller.setMain(this);
        catch(Exception err)
            err.printStackTrace();
So do we have a solution to just set the resourceBundle and reload the scene easier?
Thanks and best regards!

Your option 2 (reload the FXML for the scene using the new resource bundle as a parameter), is the way this would normally be done and what I would recommend.
Failing that, you could use option 1 of individually resetting the label text of labeled items (I don't really recommend this).
Why don't you want to use option 2?
Perhaps it is because there is some internal state of the UI which differs from the initial state when the the UI is first loaded (e.g. user has typed text in a text field and you want to preserve that). If that's the case you will need to either go with your option 1 of individually resetting the label text of labeled items, or implement something which preserves the UI state and user data by saving it in memory or to disk, reloading the UI via the FXMLLoader (essentially your option 2), then restoring the UI state and user data to what it was before the language change. Preserving and restoring the modified state seems complicated to me if you have a lot of state, so I wouldn't really advise this approach unless you really needed it.

How to avoid the prompt when verifing signature?

Similar Messages

Maybe you are looking for