How to avoid this no read acess in EPC

hi to all experts.
im getting this error in Extended Program Check how to avoid this error .
No read access to field string SWIFT

Hi,
Field swift was not read in program, which means field swift was not used in program.If swift was necessary use it with read access.
Hope this helps you
Regards,
Rajani

Similar Messages

My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?

My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?

Lynne130,
to figure out which users have administrative privileges, open the Users & Groups pane of System Preferences; each user other than the Guest User will be shown with a description of either “Admin” or “Standard”. It’s typical for the first user created on a Mac to be an administrative user.

Why do all the programs open when the mini is turned on, and how to avoid this?

why do all the programs open when the mini is turned on, and how to avoid this?

Open System Preferences > Users & Groups then select the Login Items tab.
Remove all apps listed there.
And check /Library/StartupItems
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/StartupItems
Click Go then move all items from the StartupItems folder to the Trash.

Hi. My Ipad2 is being reseted each 1 minut of use and then I found this description "resetcounter(date and time).plist". Someone knows what this means and how to avoid this? Many, many thanks. iPad 2

Hi. My Ipad2 is being reseted each 1 minute of use and then I found this description "resetcounter(date and time).plist". Someone knows what this means and how to avoid this? Many, many thanks.
iPad 2

Try resetting your device by holding down both the home and lock buttons for ~10 seconds or until the device restarts, ignoring the power slider.

How to avoid this?

Hi
i'm calling reprots from the forms.My problem is we are calling 3 reports at a time i,e one after the other, this will works fine in report 5 for screen but in 10g this will overlap all the output to a single pdf file (here i'm using cache)so that i'm getting only the third file.
how to avoid this? so that i can have 3 diffrent pdf files or one after the other if first close second open,second close third open.
please help me,
thanks and regards
vishwa

IF :BLK_MAIN.CKB_REP7 = 1 THEN
report_id:=FIND_REPORT_OBJECT('Mast03');
RUN_REPORT_OBJECT_PROC(report_id,
SERVER_NAME,
'pdf',
CACHE,
'Mast03',
'paramform=no PDFCOMP=0 EXPIRATION=120 desformat=pdf P_COMP_CODE='||:GLOBAL.G_COMP_CODE||' '||
'P_UNIT_CODE='||:GLOBAL.G_UNIT_CODE||' '||'P_TRUST_CODE='||:GLOBAL.G_TRUST_CODE,
IP_ADDRESS);
END IF;
IF :BLK_MAIN.CKB_REP6 = 1 THEN
report_id:=FIND_REPORT_OBJECT('Mast05');
RUN_REPORT_OBJECT_PROC(report_id,
SERVER_NAME,
'pdf',
CACHE,
'Mast05',
'paramform=no PDFCOMP=0 EXPIRATION=120 desformat=pdf P_COMP_CODE='||:GLOBAL.G_COMP_CODE||' '||
'P_UNIT_CODE='||:GLOBAL.G_UNIT_CODE||' '||'P_TRUST_CODE='||:GLOBAL.G_TRUST_CODE,
IP_ADDRESS);
END IF;
IF :BLK_MAIN.CKB_REP1 = 1 THEN
report_id:=FIND_REPORT_OBJECT('Mast04');
RUN_REPORT_OBJECT_PROC(report_id,
SERVER_NAME,
'pdf',
CACHE,
'Mast04',
'paramform=no PDFCOMP=0 EXPIRATION=120 desformat=pdf P_COMP_CODE='||:GLOBAL.G_COMP_CODE||' '||
'P_UNIT_CODE='||:GLOBAL.G_UNIT_CODE||' '||'P_TRUST_CODE='||:GLOBAL.G_TRUST_CODE,
IP_ADDRESS);
END IF;
In the above code,3 check box are like :BLK_MAIN.CKB_REP7,:BLK_MAIN.CKB_REP6,:BLK_MAIN.CKB_REP1 which end user selects(he can choose any one or all three).If select all 3 the report masto4 only comes,mast05,mast03 also
comes but those pdf's are overlaped from the report mast05.
But in the earlier version of forms and reports, if close the first report then second will come and like that.

How i avoid this window and directly fetched date

hi master
sir i have three options button when i select anyone then my query change and fatch new data
but before fetching data system show new windows with this message
Do you want to save the changes you have made ?
with yes / no /cancel button
sir how i avoid this window and directly fetched date
or how bypass this message
please give me idea

bro, when u execute the query to fetch records it tries to validate the form and pops an alert message. if u want to avoid it do this
change : execute_query;
to: execute_query(no_validate);
now it wont ask for validation of the previous records present on the form, but make sure such actions are not not a threat to data integrity.
zaibi.

Pluggin container makes flash player crash. all is up to date. How to avoid this?

Question
pluggin container makes flash player crash. all is up to date. How to avoid this?

First, download and run the Flash uninstaller: [http://kb2.adobe.com/cps/141/tn_14157.html http://kb2.adobe.com/cps/141/tn_14157.html] . You probably want the 64-bit version. After that has run, restart your computer, and then let's download a fresh version of Flash. Try downloading and installing it from [http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_player_11_plugin_32bit.exe here].
Once you have flash installed again, start Firefox up, and see if you are getting any errors. If it works, awesome, if not, let's move on.
Start Firefox up in [[Safe Mode|Safe Mode ]] (don't select any of the checkboxes that appear). If Flash works here, then it is one of your addons which is causing a problem.
If we are still having a problem, try [[Updating your graphics driver|Updating your graphics driver]] .
If none of these work, read [[Troubleshooting plugins|Troubleshooting plugins]] and let me know!

After adding MIME type in sharepoint server, file click opens a popup for file to open as readonly or edit, How to avoid this popup

After adding MIME type in sharepoint server,
File click opens a popup for file to open as readonly or edit, How to avoid this popup
Popup Details:
You are about to open --> File Details
How would you like to open --> ReadOnly, Edit
OS: Window 7
Jagadish

this is likely caused by the library requiring check-out/check-in. For a file to be editable, the file needs to be checked out.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

After writing into serial port, the same message gets bounced back into the Inqueue also. If anyone know how to avoid this, please rpely.

Hi,
After writing into serial port, the same message gets bounced back into the Inqueue also. If anyone know how to avoid this, please reply.
Thanks,
Ganesh

If you disconnect the cable going to the serial device, do you still get the echo? If so you have something going on in the port setup. If disconnecting the cable stops the echo then the device you're talking to is doing it - which would be my bet. One thing to check is whether this might not be normal operation. I have seen devices that if a command was successful, it simply echo'd back the command string you had sent. Also many serial devices have setting for specifying whether they are to echo commands.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Why Memory Manager .cpp Error.How to avoid this

I am getting getting the attached error when developing labview program.
Why this error is coming?
How to avoid this?
Attached the error screen shot
Attachments:
MemoryCppError.png ‏33 KB

Hi Selvan,
we don't know your VI, thus we don't know the cause…
Practical advice: save often, save early!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

What is Fragmentation, how to avoid this?

Dear All,
Please help me to get the complete documents on fragmentation and the solutions(remedies) to fragmentation in Oracle 9i and 10g.
Thanks,
Mahipal Reddy

> So, how can i avoid this fragmentation?
There is no such fragmentation on Oracle 10G when tablespaces are created as locally managed.
In basic terms - you will only get an extend failing when the tablespace is between 99.9% and a 100% full. This is unlike Oracle v7 for example where there could be 20% free tablespace, but it is unusable.
In other words - there are no tablespace fragmentation problems with 10G.
Table data block fragmentation? There is not really fragmentation. There are simply used data blocks below the high water usage mark that can still be used for new rows. There are used data blocks with used space above the high water that cannot be used for new rows. The PCTUSED and PCTFREE parameters govern these high and low water marks.
The important factors here are data block size, sizes of rows and the sizes of the PCTFREE and PCTUSED. An additional factor could be how bulk inserts are handles for example (as direct path inserts or not).
Having a table that has allocated for example 1GB of space, and is only using 800MB of that space, is not an error or a problem or a sign of fragmentation. It is to be expected. And that 200MB space not used at the moment, will be used for new inserts or updates - depending on whether those data blocks are on the free list for that table or not.
I suggest that you read about Oracle space management in the [url http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/logical.htm#i8531]Oracle® Database Concepts guide.

Form distribution submit button: how to avoid this or remove it when it's automatically inserted?

I've form(s), created in Acrobat X Pro, that I want to put on a web page for download and fill in. I tried this with FDF but... because I have a number of forms it proved very time consuming to match the FDF data to the relevant form. I'm now trying to do this through acrobat,com and form distribution.
Help pages for Acrobat X Pro state;
"Home / Using Acrobat X Pro / Forms
Setting action buttons
Add a submit button
When you distribute a form, Acrobat automatically checks the form. If it doesn’t find a submit button, it adds a Submit Form button to
the document message bar. Users can click the Submit Form button to send completed forms back to you. If you don’t plan to use the
Submit Form button created by Acrobat, you can add a custom submit button to your form."
My form already has a submit button (whose target I changed to acrobat.com) which also submits to PayPal for payment and pops up a warning message to avoid (hopefully) double submission etc. (which works OK in the undistributed form) but the wizard doesn't detect this and inserts an additional submit button - top right, in the purple area.
How can I avoid this or remove it?
Acrobat X Pro
Win 7 32 Ult

*Image Block: https://addons.mozilla.org/firefox/addon/image-block/

Tricky : how to avoid this error transparent to users ?

Hello, Oracle people !
I probably have a very common problem / question ...
We use third party application (called Kintana) that has some SQL queries referencing my custom Oracle views.
Connection to Oracle via JDBC. Some of those views are also using packaged functions residing in one custom package. So when I need to change logic, I'm recompiling just PACKAGE BODY at off-hours time in production. But when next time user runs those queries via Kintana web interface they get an error :
-- The following error is thrown by the Database:
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package body "KNTA.OM_MISC_LIBRARY_PKG" has been invalidated
ORA-04065: not executed, altered or dropped package body "KNTA.OM_MISC_LIBRARY_PKG"
But when users refresh their screen on IE browser,
error goes away. (probably Oracle calls it again and recompiles object restoring its valid state)
I understand that how Oracle works,
but I was given a task by Manager :
"Make sure that users don't see this error !"
(some of users are VIP, CIO, VPs and other "highly important" executives)
So I tried to avoid this error but can't ...
I don't know how to restore valid state of recompile package to existing user sessions without this error being seen ...
Please HELP !!!
thanx,
Steve.

I've been reluctant to tell you this since it could have some serious side effects and performance issues but you could reset the entire session package state by calling DBMS_SESSION.RESET_PACKAGE BEFORE you attempt the calls. The problem is that it resets ALL package's state information and I'm not aware of a way to do it for a single package. Unfortunately, it doesn't appear that you can call this routine after the exception occurs. For some reason, the exception seems to have to make it all the way back to the client before Oracle will acknowledge the reset.

What it this and how to avoid this ?

Some times when I compile a form a 'new applet start' and a new proccess is running on my computer. this proccess is :
/usr/lib/jvm/java-1.4.2-ibm-1.4.2.0/jre/bin/java.bin -Dmozilla.workaround=true -Xbootclasspath/a:/usr/lib/jvm/java-1.4.2-ibm-1.4.2.0/jre/lib/javaplugin.jar -Djavaplugin.lib=/usr/lib/jvm/java-1.4.2-ibm-1.4.2.0/jre/bin/libjavaplugin_jnigcc3.so -Djavaplugin.nodotversion=142
this proccess don't kill when I finish to compile the form, and in the next form again it is running on my computer. The fact is = after compile various forms, a high number of this procces are aliving in my computer.
Then I need to restart my comp to liberate the memory and the cpu.
Â¿What I can do to avoid this behavior?
Im working with Linux RED-HAT 3 AS/ES, and Designer 10G.
thanks in advanced.
Regards.

What application is set to open PDF files? If you CNTRL click on the file and open with Preview does the problem occur?
If not change the default application to open PDF files to Preview.
You can do this by highlighting the file and either use CMD i or Get Info , this will open a window with the info on the file with an option to change the application that opens the file.
That's all I can think of.

Power Point open multiple windows - how to avoid this bad behavior?

When one presentation is opened multiple ppt is also opened. It is told to be a Yosemite issue. Does anybody know how to stop this behavour?

Andrew, sorry, but that's not correct. That was true with the iBook, but the MacBook and MacBook Pro are designed to be able to run with the screen closed. It takes a hack (used at the owner's risk) to keep the MB or MBP from sleeping when the lid is closed, but both systems are engineered such that once the lid is closed and the system goes to sleep, it can be then awakened and run if an external monitor, keyboard and mouse are connected. This is by design and fully supported by Apple. Of course the MB/MBP needs to be in a setting where it gets full cooling; on a solid surface, nothing blanketing the top and nothing blocking the rear vents.
Regards.

How to avoid this no read acess in EPC

Similar Messages

Maybe you are looking for