How to avoid white lines

Hi All,
How to avoid the white lines below the selection-options text in the selection screen of the report?
I am seeing light while lines below each selection-options or parameters text
Thanks
aRs

hi,
don't use simple select-options / parameters
but
<b>selection-screen begin of line</b>
...select-options
...    end of line
sample from RFKORD10
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) TEXT-101.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS      VSTID    LIKE RF140-VSTID.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS      DVSTID   LIKE RFPDO1-KORD10DV DEFAULT ' '.
SELECTION-SCREEN COMMENT 61(9) TEXT-102.
SELECTION-SCREEN END OF LINE.
A.
Message was edited by:
        Andreas Mann

Similar Messages

How to avoid white color in photo taking in iphone 4s at night with flash?

how to avoid white color in photo taking in iphone 4s at night with flash?

HI Lisa91,
Here is a link to a post about the same problem you are having and the same printer. You may find the posts helpful as some were able to find a solution. Post number 6 and number 12 specifically have found solutions that worked for them. Hope this helps some.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

How to avoid a line of data being cut by page jump ?

Dear Java Experts,
I have encountered a very troublesom problem!
The problem is described as follows:
When the browser (IE or Netscape) contains many HTML character data (especially HTML tables and data from DATABASE), how can I print the data to client's printer
(i.e. browser's printer) without having a line of data cut by page jump?
That is how to avoid a line of data cut by page jump, upper part of the data in one page and lower part in next!
I think the problem should be solved with client's java applet!
Can any expert give me sample code to solve the problem or indicate me where I can find documents about solving the problem?
Thank you very much in advance!!
Best Regards,
Jackie Su

HTML is not really meant for device-specific presentation (despite a lot of abuses in this area).
I don't think you're going to solve this satisfactorily with HTML, no matter what you jury-rig around it.
If this kind of presentation control is a requirement, you're probably better off with a format that directly supports this--PDF is the most obvious choice.
There's a sourceforge project that supports PDF generation from Java (http://sourceforge.net/projects/itext/ - I don't have any experience with it) and I think there may be others.
And I believe there are also commercial products for this.

How to avoid XVBPA line item values while creating sales order

Hi Friends
I am creating Sales order using function module IDOC_INPUT_ORDERS, for that I am passing partner details through segment E1EDKA1.If I pass the same partner details(Partner number, name1,name4,city,postel code) which is same like customer master,
I can able to book the order and entries are coming only one time in VBPA table(Header Item level).But if I change any value for the particular partner in the Input(For example Name4, there is no value in customer master but I added through program).Now its creating an order but its showing the entered partner informations in header level.When I checked the same in line item level, its not picking the values from header, its picking the values from customer master for that particular partner.
So this line item also coming in VBPA table, because its different from header data.
Anyone guide me, how to avoid this problem while booking order through program.
Thanks
Gowrishankar

I am updating Ship-To-Party value in segment E1EDKA1 and calling IDOC_INPUT_ORDERS function module to create the sales order.
In this case for the particular partner there is no NAME4 value in KNA1, I am passing some value through this segment E1EDKA1.
So its creating an order with this new addresses , so its generating new ADRNR in VBPA header level.Thats fine.But the same time
its not copying the same value from header to line item.
In Line item level again its picking the address details from KNA1 for the particular partner number.So its showing Blank value in NAME4 field of line items.Its creating and spllitting issue, while creating delivery.
Thanks
Gowrishankar

How to remove white line that appears on background of flash file when viewing in powerpoint?

When importing a swf file into powerpoint with a background colour a thin white line appears on the top of the flash movie when played in powerpoint. The white line disappears when you click onto another slide and back again, but always appears when initially playing the slide. Anyone have any ideas why this is and how to remove it?
Any help is appreciated.
Dom

Doesn't the Location Bar (URL's) also disappear in the Add-ons Tab? <br />
Separator or border used to delineate the User Interface (Toolbars) from the content area.
Contact the developer of Tree Style Tabs. If that white line doesn't appear until you click on a Tab, I would call it a Bug or glitch in that extension.

Photosmart 8750 - how to avoid white edges on print? And how to match colors from monitor to print?

Hi all! I´m new here so I hope I ask this in the right forum. Please advice me if this should be in another sub-forum..
First: The white edges around my photos when printed:
I can´t figure out how to avoid the white edges when I print my photos.
If I print in A3 size (or any other size) there´s always the white edges around my photos on the print, and it´s really annoying.
I make the size in Photoshop (CS4 extended) so that the photo matches the size of the printing paper, but still it gets adjusted when printing so I get the white edges.
I either print directly from PS or from Windows Photoviewer. (I have Windows 7).
In PS in the printing dialog box it says Scale to fit media, when I tick this and also have the Show Paper White ticked, it appears that the photo goes exactly as the size is set, but then I can see a thin white edge on top of it, illustrating that the photo will be printed with a white edge on top. If I untick the Scale to fit media, the photo appears to be cut a great deal before printed, so this will destroy my image.
I usually print from Windows Photoviewer as the colours in PS turns out more different than when saved and printed from Windows. (My next question). In Windows Photoviewer I only have the option Fit to frame, but in the preview it doesn´t look like any of those two options will give a borderless print.
In the printers dialoge box for the Paper/Quality I only use the option for A3 HP glossy photopaper, but I see there are other options such as Photo without edges A3, but then the size says 423x303mm which is slightly bigger than the size of the photo.
Also there´s a box to tick under it, Print without edges and under it Automatic fit without edges.
Is it something here I should tick or untick?
What options should I use to get it to print and fill the whole paper?
Second: How to get the same colours on my print as it shows on my monitor?
I have tried figuring out this, but I gave up. Though I know there´s something about the Profile´s, just not how to set them..
As already said, the colours looks quite different when printed directly from PS than saved as .jpg and printed from Windows Photoviewer. In colours the print is closer to the actual colours when printed from Windows than from PS, but BW photos is quite far from as seen on the monitor when printed, from both of them.
Instead of this nice warm "brownish" hue seen on my monitor, it´s printed with a greenish hue. Really annoying as I spend a lot of time working on my photos to get them as I like.
In the printer´s dialog box (in Windows) I have disabled the ICM colour management.
In PS dialog box I´m sure there´s something to do different under the Color Management, but I don´t know what.
Also there´s probably something different in my monitor´s profile that differs from the printer and PS?
Anyone who can help with either one or both of my problems??
That would be highly appreciated so thanks so much in advance!

HI Lisa91,
Here is a link to a post about the same problem you are having and the same printer. You may find the posts helpful as some were able to find a solution. Post number 6 and number 12 specifically have found solutions that worked for them. Hope this helps some.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

How to fix white line on top while using personas ?

Everytime I set a persona for Firefox I get a white line on top, I heard that it can be fixed by modifying the pref.js file, but I don't want to mess that up.

Here's a picture of how it looks by the way.

Good workflow to avoid white lines and discolored boxes with transperancy?

I'm somewhat new to Illustrator. I have designs in illustrator CS4 that contain objects with drop shadows that are on top of gradient backgrounds. When I save out the artwork as a PDF file I see random faint white lines and discolored boxes around the objects with the drop shadows. When I print proofs of the file on my HP3500 color laser printer I see the white lines and discolored boxes as well. I'm afraid the the lines will show up in production when I send off to the printer. Here's what I'm doing. Any suggestions would be appreciated.
(Document Raster Effects Settings: Resolution-High 300ppi/Background: Transperant/Options: preserve spot colors, add 12.7mm around object)
1. Save file as PDF from Illustrator CS4
2. PDF Settings
a. PDF Preset: PDF /xa:2001
b. Advanced Overprint and Transperancy flatener options: Preset-High Resolution
When viewed and printed from Adobe Acrobat 9 Pro there are white stiching lines that are visible.
Do I need to worry about these? Or will they go away when sent to a better printer?
Thanks for the help.

Try "Press Quality" Acrobat 5 compatable setting for "live" transparency. You can also try PDF/X-4 2008 which maintains live transparency and, in CS4, maintain Acrobat 5 compatability. PDF-X1 is a setting that "flattens" transparency which may limit your output options, depending on final output device. Double check your raster settings and make sure it is set for 300ppi/2400dpi and not 72ppi/300dpi. As suggested by Wade, your printer may not be a Postscript Level 3 output device with a RIP. So, the driver may not be screening the artwork properly and the stitching shows up in output. You may benefit from taking the file to a prepress shop and have them output a "contract" proof. If the stitching shows up in the contract proof, then the PDF setup may be the problem or the original file itself.

How to avoid blank lines in smartforms?

Hi all,
I am using an INCLUDE TEXT in a smartform. The problem is it is priniting with the blank lines entered in the standard text.
I couldn't find any option for avoiding these blank lines using the respective smartstyles.
Is there any option to avoid the blank lines ? Please help me.
Thanks,
Aravind

Hi,
well if the blank lines are present in the include text.
then you have to modify the standard text.
in the smartform the text is printed as it is.
you need to make changes to the standard text.

How to avoid last line(ie repeating last line)

I wrote a procedure for writing DB table to flat file.
but the last line is repeating ie printing twice.
OPEN curr_v FOR str_all_cols_sel;
LOOP FETCH curr_v INTO l_columnValue;
utl_file.put_line(l_output,l_columnValue);
EXIT WHEN curr_v%NOTFOUND;
END LOOP; -- curr_v
Any help?

If you reached the last record, it gets printed. Then it fetches once more, but no data is found. However you first print and then exit. That's why the last line gets printed twice.
The code should be:
OPEN curr_v FOR str_all_cols_sel;
LOOP
FETCH curr_v INTO l_columnValue;
EXIT WHEN curr_v%NOTFOUND;
utl_file.put_line(l_output,l_columnValue);
END LOOP; -- curr_v
Regards,
Rob.

How to avoid Line Items(fields) in BAPI mapping.

Hi
Does any body help me for mapping between header and line items in BAPI..
my scenario is filerfcmail(wokflow)!
File is CSV based :
(ex: 001150,,1123,JERM,08122006,,,
,,,ANN,,01082006,
If you look at example csv file , there is some fields mixed with header and line items. But in RFC header can be 1 to 1 and line item should be 0 to Unbound.
Now my problem is if I sent above example csv file as source :
The payload coming like this(sxmb_moni) :
</HEADERDATA>
- <GLACCOUNTDATA>
- <item>
<COSTCENTER />
<PROFIT_CTR />
</item>
- <item>
<GL_ACCOUNT>738100</GL_ACCOUNT>
<ITEM_AMOUNT>60000</ITEM_AMOUNT>
<COMP_CODE>001150</COMP_CODE>
<ITEM_TEXT>*777-8030-861</ITEM_TEXT>
<COSTCENTER>7320</COSTCENTER>
<PROFIT_CTR>7320</PROFIT_CTR>
<ALLOC_NMBR />
</item>
- <item>
<GL_ACCOUNT>738100</GL_ACCOUNT>
<ITEM_AMOUNT>40000</ITEM_AMOUNT>
<COMP_CODE>001151</COMP_CODE>
<ITEM_TEXT>*777-8030-861</ITEM_TEXT>
<COSTCENTER>6010</COSTCENTER>
<PROFIT_CTR>6010</PROFIT_CTR>
<ALLOC_NMBR />
</item>
<item />
</GLACCOUNTDATA>
You can find there is one more item coming after headerdata with null values. It means map reading first line and one by one , if any field found in rows which belogs to GLAccount(Line item), then it writing one more item after headerdata with that fields only.
Remainig GLAccount data coming as per map after the item .
Can you tell me how to avoid extra line items.
Thanks,
Sankar

Yes, It exist..
I cross checked ..with out givig fileds and giving some fields...its writing another items in after headerdata tag.
hope you understand , what my problem..
See: GLACCOUNTDATA under subnode
item is 0 to unbound in BAPI side, because of this its reading all rows , and if find any field which belongs to GLAccount , then it writing another item tag after headerr data.
Thnaks,
Sankar

Utl_file.utl_raw adds a line feed at the end of the line. How to avoid it.

utl_file.utl_raw adds a line feed at the end of the line. I have to send some binary files to my vendor and they do not want a line feed at the end of the line.
When I execute the sample program below, it creates a file with a line feed(chr(10)) at the end of the line. When I do dump in hexa, it shows a character x0A
How to avoid the line feed at end of line?
We are using Oracle 9i on unix platform.
declare
l_output           utl_file.file_type;
v_raw      raw(32767);
v_trlr_rec_code      VARCHAR2(2);
v_trlr_evnt_title      VARCHAR2(6);
begin
l_output := utl_file.fopen( 'RM_MHE_IN_DIR', 'abc.dat', 'w', 14 );
v_trlr_rec_code      := '99';
v_trlr_evnt_title      := 'STARTD';
v_raw := HEXTORAW(v_trlr_rec_code) || utl_raw.cast_to_raw(v_trlr_evnt_title);
utl_file.put_raw( l_output, v_raw );
utl_file.fflush( l_output );
utl_file.fclose( l_output );
dbms_output.put_line( utl_raw.cast_to_varchar2( v_raw ) );
EXCEPTION
WHEN OTHERS THEN
     dbms_output.put_line( sqlerrm );
end;
/

oops, sorry i overlooked the fact that the db is 9i; thanks for pointing it out Solomon.
Not sure about this, but a workaround could be to remove the "\n" characters at the end of each line using one of the many Unix utilities after the file has been created.
isotope

How to remove empty lines from xml files after removing nodes from document

<pre>
Hi
<b>i have xml document, which is shown below
after removing some nodes from the document ,i am getting empty lines in place of removed nodes,how to resolve this and get the proper xml document without any errors</b>
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE Message SYSTEM "TRD01.dtd">
<Message>
<Header>
<CounterPartyType>CLIENT</CounterPartyType>
<CreationTime>20134455</CreationTime>
<ErrorCode>363 </ErrorCode>
<ErrorEnterPriseId>N</ErrorEnterPriseId>
<ErrorStatus>1</ErrorStatus>
<ErrorSystemId>STL</ErrorSystemId>
<ErrorTimes>31</ErrorTimes>
<MessageType>T</MessageType>
<RecipientEnterpriseId>N</RecipientEnterpriseId>
<RecipentSystemId>EXM</RecipentSystemId>
<Remarks>REMARSK</Remarks>
<SenderEnterpriseId>N</SenderEnterpriseId>
<SenderSystemId>TR</SenderSystemId>
</Header>
</Message>
<ErrorCode>363 </ErrorCode>
<ErrorEnterPriseId>NIHK</ErrorEnterPriseId>
<ErrorStatus>1</ErrorStatus>
<ErrorSystemId>STL</ErrorSystemId>
<ErrorTimes>31</ErrorTimes>
XPathExpression expression5 = xpath.compile(xmlpath5);
Object result5 = expression5.evaluate(doc, XPathConstants.NODE);
Node node5 = (Node) result5;
node5.getParentNode().removeChild(node5);
XPathExpression expression6 = xpath.compile(xmlpath6);
Object result6 = expression6.evaluate(doc, XPathConstants.NODE);
Node node6=(Node) result6;
node6.getParentNode().removeChild(node6);
XPathExpression expression7 = xpath.compile(xmlpath7);
Object result7 = expression7.evaluate(doc, XPathConstants.NODE);
Node node7=(Node) result7;
node7.getParentNode().removeChild(node7);
doc.normalize();
doc.normalizeDocument();
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
t.setOutputProperty(OutputKeys.METHOD,"xml");
t.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
the xml output i am getting is
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<Message>
<Header>
<CounterPartyType>CLIENT</CounterPartyType>
<CreationTime>20134455</CreationTime>
<MessageType>TRD01</MessageType>
<RecipientEnterpriseId>N</RecipientEnterpriseId>
<RecipentSystemId>STL</RecipentSystemId>
<Remarks>REMARSK</Remarks>
<SenderEnterpriseId>N</SenderEnterpriseId>
<SenderSystemId>T</SenderSystemId>
</Header>
</Message>
<b>could you please let me know how to avoid empty lines in the xml doucment output</b>
this is the method i am using to get the result
public void ValidateRecord(String xml){
try{
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder db = factory.newDocumentBuilder();
//parse file into DOM
/*DOMParser parser = new DOMParser();
parser.setErrorStream(System.err);
parser.setValidationMode(DTD_validation);
parser.showWarnings(true);*/
System.out.println ("HI THIS xml is validation "+xml);
Resolver res = new Resolver();
db.setEntityResolver(res);
Document doc = db.parse(new InputSource(new StringReader(xml)));
XPathFactory xpf = XPathFactory.newInstance();
XPath xpath = xpf.newXPath();
// XPathExpression expression = xpath.compile("//A/B[C/E/text()=13]");
String xmlpath="/Message/Header/CounterPartyType/text()";
String xmlpath1="/Message/Header/RecipentSystemId/text()";
String xmlpath2="/Message/Header/ErrorSystemId/text()";
XPathExpression expression = xpath.compile(xmlpath);
XPathExpression expression1 = xpath.compile(xmlpath2);
Object result = expression.evaluate(doc, XPathConstants.NODE);
Object result1 = expression1.evaluate(doc, XPathConstants.NODE);
Node node = (Node) result;
Node node1 = (Node) result1;
System.out.println("the values of the string is " +node.getNodeValue());
System.out.println("the values of the string is " +node1.getNodeValue());
// for (int i = 0; i < nodes.getLength(); i++) {
//System.out.println(nodes.item(i).getNodeValue());
// CAHNGING THE RECEIPENT NODE
XPathExpression expression2 = xpath.compile(xmlpath1);
Object result2 = expression2.evaluate(doc, XPathConstants.NODE);
Node node2 = (Node) result2;
System.out.println(node2);
node2.setNodeValue(node1.getNodeValue());
System.out.println(node2);
//removing the nodes from document
String xmlpath3="/Message/Header/ErrorCode";
String xmlpath4="/Message/Header/ErrorEnterPriseId";
String xmlpath5="/Message/Header/ErrorStatus";
String xmlpath6="/Message/Header/ErrorSystemId";
String xmlpath7="/Message/Header/ErrorTimes";
XPathExpression expression3 = xpath.compile(xmlpath3);
Object result3 = expression3.evaluate(doc, XPathConstants.NODE);
Node node3 = (Node) result3;
node3.getParentNode().removeChild(node3);
XPathExpression expression4 = xpath.compile(xmlpath4);
Object result4 = expression4.evaluate(doc, XPathConstants.NODE);
Node node4 = (Node) result4;
System.out.println("node value");
System.out.println(node4.getParentNode().getNodeName());
node4.getParentNode().removeChild(node4);
XPathExpression expression5 = xpath.compile(xmlpath5);
Object result5 = expression5.evaluate(doc, XPathConstants.NODE);
Node node5 = (Node) result5;
node5.getParentNode().removeChild(node5);
XPathExpression expression6 = xpath.compile(xmlpath6);
Object result6 = expression6.evaluate(doc, XPathConstants.NODE);
Node node6=(Node) result6;
node6.getParentNode().removeChild(node6);
XPathExpression expression7 = xpath.compile(xmlpath7);
Object result7 = expression7.evaluate(doc, XPathConstants.NODE);
Node node7=(Node) result7;
node7.getParentNode().removeChild(node7);
// Node b13Node = (Node) expression.evaluate(doc, XPathConstants.NODE);
//b13Node.getParentNode().removeChild(b13Node);
doc.normalize();
doc.normalizeDocument();
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
t.setOutputProperty(OutputKeys.METHOD,"xml");
t.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
t.transform(new DOMSource(doc), new StreamResult(System.out));
catch (Exception e) {
e.printStackTrace();
System.out.println(e.getMessage());
</pre>
Edited by: user12185243 on Apr 6, 2013 6:38 AM
Edited by: user12185243 on Apr 6, 2013 6:41 AM
Edited by: user12185243 on Apr 6, 2013 6:43 AM
Edited by: user12185243 on Apr 6, 2013 6:45 AM
Edited by: user12185243 on Apr 6, 2013 9:00 AM

either this way we can do this
1)
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
<b> factory.setIgnoringElementContentWhitespace(true); </b>
DocumentBuilder db = factory.newDocumentBuilder();
or
2)
java.io.StringWriter sw = new java.io.StringWriter();
StreamResult sr = new StreamResult(sw);
t.transform(new DOMSource(doc), sr);
String xml1 = sw.toString().trim();
<b> xml1=xml1.replaceAll("\\s",""); </b>
System.out.println(xml1.trim());

Ignoring white lines in a file parsed with Scanner

I've a little problem...
How to ignore white lines in a file (for configuration informations) parsed with Scanner???
My parser can ignore #(comments) and other thing, but not white lines...
oooo
fucking little problem!!!
Thank for solutions...
euronymous

Wrong assumption. Scanner doesn't return lines, it returns tokens separated by delimiters which are whitespace by default, so by default it will already ignore blank lines.
If you are using custom delimiters, make sure to include space, tab, and newline (\r \n and \f) as delimiters.

Printing borderless leaves white line at bottom of print

Hi,
being frustrated with the PS CS3 off center printing issue, I now try to print my pictures out of LR. But here, I have a problem printing borderless as well: Im am using an Epson 2400 on an IntelMac running OS 10.4.10.
E.g. when I want to print a borderless 4x6 print, already the LR preview indicates that there will be a white line on the bottom of the image. This is then confirmed when I print. Same for other print sizes. I set all margins to zero in LR, chose borderless in the printer driver... I tried to trick the software by creating a custom paper size, but so far, nothing helps.
Is this an LR flaw?? ( I am running LR 1.2)
Thanks for your ideas.
Anne

Hi,
I finally got a workaround, if someone is interested: I wrote myself the following instruction now:
Avoiding white line on bottom of LR borderless prints:
for 4x6 prints:
Page setup: choose 4x6 sheet feeder borderless
Create a custom paper size: 4.00x6.02 (6.01 does not work) with margin ON TOP of 0.01 in, save as "4x6 borderless"
In the printer driver menu choose "Paper Handling" from drop down menu. Click the Scale to fit paper size and choose the new custom size "4x6 borderless".
The expansion is set to maximum, but since this method worked, I have not tried to reduce the expansion in order to see what the effect is. (I have wasted already enough paper and ink)
The prints now don't have a line on the bottom anymore.
The white line on the bottom of the print preview in LR, however, is still visible.
Anne

How to avoid white lines

Similar Messages

Maybe you are looking for