How to back up contacts in E61i since using window...

Hi everyone. i am from Malaysia and I use a Nokia E61i. Once a month I will sync my mobile with my pc and the contacts are automatically updated in Outlook. I then export the updated contacts into Excel and other (tab, csv) formats for safekeeping. Now that I have upgraded to Windows 7 I am lost as to what to do. I need help and advise on how to back up my contacts in my Nokia E61i. thank you.

You are not lost here download the latest version of Nokia pc suite and connect the device and back it up, oh yes windows7 dont have outlook directly but still u can have the backup stored on to your pc you can also backup ur contacts to memory card and sim card( if u have a32 or 64k sim)
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Similar Messages

  • How do I TRANSFER CONTACTS (back up contacts) from iPhone 4s to Windows 7

    How do I TRANSFER CONTACTS (back up contacts) from iPhone 4s to Windows 7

    THANK YOU. Sorry for late response. Had to pick someone up. 
    randers4    - I decided to go with the My Contacts Backup app which produced success (I'll know for sure if I need to use the file)
    JoFlo57  - I understand that I could use iCloud but I'm a little on the paranoid side about everybody's data in one location... what with hackers getting into Sony's Playstation accounts and other infamous huge hacking security failures I frankly don't feel safe storing anything on iCloud.

  • How do you increase font size in Bridge using windows 7 and a 4k monitor?  It appears as though this issue has come up previously but there is no answer.

    How do you increase font size in Bridge using windows 7 and a 4k monitor?  It appears as though this issue has come up previously but there is no answer.

    Unfortunately this will require some new programming by Adobe and there's no way to know when that will happen. In the meantime, the only option I think you have available to you is to change your resolution so that your monitor is using fewer pixels per inch.
    Kinda blows the whole value of the newer monitor but I suppose you can switch back and forth from low res when you are working in Bridge to high res when you are working in PS.
    Sorry, but for the time being, that's about it.
    Best,
    Gary

  • How to check ink levels of a 4620 using windows 8.1

    How to check ink levels of a 4620 using windows 8.1

    Hi krmoss,
    Welcome to the HP Support forums.  I see that you would like to learn how to check the ink levels on your Officejet 4620 printer.  
    The steps on how to check the estimated ink levels can be found in your User Guide on page 74 in the section titled “To check the estimated ink levels from the printer control panel”.   If you have installed the full feature software and driver for your printer onto your computer you can open up the HP Solution Center and check the from there as well.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to link Palm M500 to Outlook 2003 using Windows Vista

    Hi!  Not computer savvy so need some assistance on how to link Palm M500 to Outlook 2003 using Windows Vista.  Not sure if my Palm is too old to work with the others.  Any suggestions would be greatly appreciated!
    Thank you!
    Post relates to: Palm m500

    http://kb.palm.com/wps/portal/kb/na/m-series/m500/unlocked/solutions/article/37014_en.html

  • How do i access my photos in iCloud using Windows Vista?

    How do i access my photos in iCloud using Windows Vista?

    You can access your photos from photo stream on any of your devices.
    If you delete photos from the camera roll they aren't deleted from photo stream, if that's what you are asking.
    My webpage here might help you understand the various ways photos can be saved on your device and some of the advantages and disadvantages associated with each method.

  • How to back up contacts to Mac address book?

    Hi, am trying to back up contacts from my 8900 to my Mac- would like them to go into the address book, but the desktop software doesn't give m that option- instead, they are going into a folder which I then cannot open as it says it contains corrupt info? Would appreciate any help!

        Ensuring your contacts are backed up is very important RGreenstreet. I would be happy to provide options to ensure your contacts are saved. With an LG ENV3 we do offer an application called Backup Assistant. This an be downloaded from the Media Center or Media Store on the device. For additional information regarding our Backup Assistant app and how to download click, http://vz.to/1vmljYw
    Thank You,
    MichelleL_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT

  • Q10 how to back up contacts

    Hi
    How can I back up contacts on a Q10?  and is it possible to retrieve contacts if the phone has been reinitialised?
    Thanks in advance for your help
    Gareth

    Hi..
    Please follow the below link
    http://crackberry.com/how-backup-and-restore-your-blackberry-10-device-blackberry-link
    thanks
    Please update the result after applied..
    Thanks

  • How To Back Up Contacts (Vista)

    My phone has been acting sluggish lately and I want to do a factory restore. I know how to back up my pictures, but how do I back up my contacts?

    vermooten2,
    Each time you sync, a backup is created. It is also replaced during each subsequent sync. It is not editable, and can only be recovered to an iPhone.
    When you sync your data to another application, such as Windows Address Book, Outlook, or Yahoo Address Book this puts your data in another location, it can be edited, and won't get replaced each time you sync the iPhone.
    Hope this helps,
    Nathan C.

  • I am unable to transfer my pictures from iphoto after editing back to my external hard disc. How do I do it. Previously I used Windows and this is the first time I am using a Macbook. Need help and tutorials.. Where can I find em..

    Hi there, I am new to Apple Iphoto. I am having lots of problems in transferring my edited photos back to my external Hard disc after editing. How am I able to do it. will it be able to open in Windows OS... Previously I was using Windows and now i m new in using the Apple OS.. Need guidance.. Would really appreciate if any1 of u guys could help me through. are there any other applications that I could use to edit pictures.

    Best if you try and explain what you are trying to acheive.
    Iphoto is a different paradigm than you're used to. I don't understand why you are trying to transfer your edited photos back to an external disk.
    There are tutorials here
    http://www.apple.com/findouthow/photos/
    Regards
    TD

  • How To Add New Contact To a Group Using iPhone

    I use a Business and Personal Group. When I add a new contact using my iPhone, there is no way I can assign it to a Group. Then when I sync, the new contact shows only in Group "All". Further, in Address Book you cannot tell which contacts are not in a Group. I can see the total number of contacts in Group All, and the total in Group Personal, and the total in Group Business, so I can tell the sum of Personal and Business is less than the number in All. But I cannot tell which contacts are in All and not assigned to either Business or Personal. This makes it difficult to then locate the contact on my iPhone (I tend to always look in the appropriate Group).
    So how can I either a) assign a new contact to a Group using my iPhone or b) identify in Address Book which contacts are not assigned to any Group?

    RJOBoston wrote:
    So how can I either a) assign a new contact to a Group using my iPhone or b) identify in Address Book which contacts are not assigned to any Group?
    a) In Phone, Contacts, enter the group you want, THEN add the new contact (you can't add a new contact to a group from Recents, but you can add a number to an existing contact, which will remain in its original group).
    b) In Address Book, select group All, then click File, Export Group vCard... and view the exported file with your favorite text file viewing method (TextEdit, cat | more, vi, etc.); look for entries without a CATEGORIES: line.
    Unchecking Hide Extension and changing it from .vcf to .txt might allow you to open it easier in TextEdit; I opened Terminal and used "cat Documents/vCards.vcf | grep : | more" to view them ("grep :" filters out the photos).
    (Note to others: The above procedure is for Mac OS; Windows users could probably export their Outlook Address Book and use Notepad to view it.)

  • How to access PPC contacts into my application using Flash

    Hi,
    I am new to flash lite anybody help me how to access PPC
    contacts into my application.

    Hi,
    I am new to flash lite anybody help me how to access PPC
    contacts into my application.

  • Why Isight is missing?, how to fix boot camp on 2008 iMAC using windows 8.1? can't redownload Lion.

    Basically I'm troubleshooting, I have been having problems with my webcam ever since I installed a new hard drive, it seem's to be turned on due to the light above so I'm sure what else to do about it because both Windows/Mac OS aren't picking it up.
    At first I thought there be some 'drivers' from the boot camp files that I could manually install, like I did with the other devices but that didn't seem to work for the camera. Also I hear Windows would be fine using either Boot Camp 4,5 to download the appropriate files but each time I try anything I get something about 'unsupported hardware' because before I could install Boot Camp 3 fine but before I was running under 32bit Windows because I hadn't realised at the time that the Mac was using 64bit so it seems like it has something to do with the conversion from 32 to 64 bit but that wouldn't make much sense the Mac OS as far as I'm aware was always 64bit.
    And I noticed if I try to be download via the Mac side for the boot camp files then I get 'The Windows support software is not available' but to be fair I have never had any luck in the past with getting those files off the mac side ever.
    So in short 2 problems Webcam, Boot Camp need to work but are currently having issues.
    Also I can't redownload 'Lion' since it's been saying 'item not available', which is rather frustrating since I originally paid for it, I'm forced to stick to Snow Leopard, I'm baffled to why I can't redownload from my history like I do with Xbox or Steam.

    Couldn't edit the question so thought add that the Imac camera light is turned on while using Windows, the Mac OS so it should be connected but it isn't.

  • How to implement a dual booting PXI system using windows 7 and labview RT

    Good Day
    My name is Mariano Ocana from the University of Manitoba, and I want to implement a dual system using windows 7 and labview RT in a PXIe-1082 chassis with a PXIe-8102 embedded controlled (the chassis came with windows 7 installed). What are the steps to use both systems (windows and RT)  in the same chassis?, in the NI help comes an example implementing a dual system using windows xp and RT, it is the same procedure?.
    Thank you in advance for all your help.
    Regards
    M. Ocana

    Greetings, Mariano.
    The real issue you have to contend with is whether or not you have a LabVIEW RT license.  If the 8102 controller was purchased Windows-Only, you likely do not have a license to run LabVIEW RT on the controller - you can purchase one, I think it's about $500, and at that point you can request a LabVIEW RT Configuration CD (that's not what it's called, but the sales guy will know what I'm talking about).  The Config CD is a CD that will partition your controller correctly with both FAT32 and NTFS filesystems (in the appropriate way) to allow you to run Windows 7 and LabVIEW Real-Time on the controller correctly.  Once done, you can then switch within the BIOS between LabVIEW Real-Time and Windows in order to dual-boot.  
    Either way, you likely need to contact NI sales to either purchase an RT license (if one was not received at the time of purchase) or to request a Configuration CD (it might also be called a dual-boot install CD or similar).
    -Danny

  • Everytime i try install the latest version it says that the fike is courpted. How can I update to the latest version using windows 7 home premium 64 bit ?

    I have tried to update several time using different downloads and every time I try and install it says file is corrupted .

    MNRK wrote:
    @XAHEER
    I have used the Oracle 11g client and it ran fine. But I could not find the driver in ODBC drivers list. I assumed that this happening as I am using Windows 7 Home edition.Is it true?
    Thanks
    MNRKI don't know about 11g, but with 10g and earlier, the odbc drivers do not install by default with the client. You have to choose "custom installation" then select "windows components". Since I never knew what all would be installed in a "typical" (admin or run-time) installation, I would always select one of those configs (admin or run-time, as appropriate), then run a second installation - choosing the same ORACLE_HOME as before, choosing "custom" installation, then selecting "windows components" from the list of features.

Maybe you are looking for