How to backup configuration for a domain?

While I am learning WebLogic Server, I created serveral domains for excersice.
However, my laptop is now crashed and need to reinstall the whole system. So HOW
should I do to backup all the domains? If it's impossible, it means I have to
re-create all the domains again. I believe there must be a backup way. What's
that?

Jonathan wrote:
While I am learning WebLogic Server, I created serveral domains for excersice.
However, my laptop is now crashed and need to reinstall the whole system. So HOW
should I do to backup all the domains? If it's impossible, it means I have to
re-create all the domains again. I believe there must be a backup way. What's
that?You can just zip/tar up all the domain directories.
Alternatively you could use the fantastic wlshell utility
(www.wlshell.com) to generate a script to recreate your domain (it can
generate a script automatically from your config.xml). That has the
advantage that you can use it to build domains on different machines
very easily, customising where necessary.
Robert

Similar Messages

How do I configure for port forwarding?

I just relpaced my CISCO E3000 wireless router with an Apple Airport Extreme and need to set up port forwarding. I find the Airport Utility confusing and very limited in capabilities. How do I configure the router for Port Forwarding?

Here's a document that you can follow: https://discussions.apple.com/docs/DOC-3415
However, I ran into an issue with setting this up and had to do a work-around: Custom Port Forwarding Config Not Working

How to set password for BPEL domain

Hi,
I am new to SOA.
I want to setup client-server environment for few developers.
I installed SOA 10.1.3.3 in the server machine.
And I created few domains in BPEL, one for each developer.
It didn't ask me to set the password while creation of the domain.
Please let me know how to set password for newly created domain so that each developer login to his/her own domain and manage processes.
Thanks!!!

Thanks for the prompt response.
What roles should I give to my developers to allow them to manage their services in ESB control, BPEL control, WSM control.
And I would like to know how to set the password for a BPEL domain too.
Message was edited by:
user644377

How to increase SBRS for a domain?

I've implemented a new mail system for a new company recently. But some staffs in this company reported that they could not send email to some domains like hotmail.com, msn.com,etc. So I go to senderbase.org to check my company IP address and "Email Reputation Score: Poor". How can I increase the SBRS? and also can I know the reason why this IP has a poor email reputation score?

Also you may want to verify if you have the correct DNS information for your domain.
Here is a great article that goes into detail on this:
http://www.pkguild.com/?p=7
With Hotmail - it should help (according to their website) if you have SenderID and SPF records for your domain.
If your email is "worth money" then you can pay a company like SenderScore Certified a chunk of money and get onto their whitelist (which Hotmail and other major email providers use). Ironport used to own SenderScore (under another name) but it is totally seperate now.
You can also improve your SBRS by making sure none of your email addresses forward email out of your Ironport (as they will be also forwarding spam out too).
If you have mailing lists - make sure they do proper forwarding (ie not an Exchange DL or UNIX /etc/aliases) as they make it look like you are forging other people's domain names.
Oh yeah - if you have any spammer issues on your network - fix them too :)

How to create console for new domain

I created new domain according to the steps given under creating new domain in
documentation of 6.1, Can any one help me how to get console activated for this
new domain .At present it is not able to get the console for this domain even
though in log files it shows console.war is deployed.
Thanks in Advence

Please follow the exact steps given in the following document to create a new
Domain:
http://e-docs.bea.com/wls/docs61/////adminguide/overview.html#1031797
Also, if you have done so, please check if a directory called .wlstaging is created
in the new domain directory that is created. This directory has the console.war
file.
This is automatically created by the WLS when creating a new domain.
hope this helps.
thanks,
Mihir
surendra wrote:
I created new domain according to the steps given under creating new domain in
documentation of 6.1, Can any one help me how to get console activated for this
new domain .At present it is not able to get the console for this domain even
though in log files it shows console.war is deployed.
Thanks in Advence

How we archieve configuration for Cisco ASA 5500 series appliances

Hi,
We need to archieve configuration for Cisco ASA 5500 series appliances.
We have Cisco works LMS 3.0.1.
Device package installed is 4.2
Any help would be appricated.
Thanks in advance.
Samir

Hi ,
Thanks for your answer.
Right now we are using TACAS to login in to the ASA. That means we need single username and password to login via
Cisoworks. Am I correct ?
Waiting for your reply.
thanks,
Samir

How to reset iTunes backup configuration for iPad and iPhone?

After buying a new Mac, I migrated my settings (because there were w a lot of apps) and generally everything's working. Except when I try to sync my iPad or iPhone, I get the following error:
iTunes could not backup the (device) ... because the backup was corrupt or not compatible with the iPad
A few notes
It does work with a new account, just not this one, so there's some setting somewhere that probably needs to go
I did repair disk permissions
I tried to reset preferences via mv *iTunes* to a backup folder in <user>/Library/Preferences
There are no backups on this machine (if you go to iTunes / Settings / Devices the "device backups" list is empty)
It still feels like something is pointing somewhere invalid, but I have no idea how to reset it.

The problem turned out to be a symlink to a folder that pointed nowhere where the backups were stored.
I seriously doubt many people are going to run into this issue, but hey, there you go, another thing to watch out for are symlinks if you transfer your settings to a new machine.
The reason before was that I was clearing out space on a SSD, and backups took up enough room.

Adding second 5508 Wireless Controller, how to best configure for load balancing and redundancy?

We recently purchased a second 5508 wireless controller (both licensed for 100+ AP's). What is the easiest way to configure and add the second controller so I can split the load between the 2 controllers and provide failover capability? I do not want to run in an active/standby mode since that will effectively cut our AP capacity by half even with both controllers running.
Should I just manually configure the new controller (long and drawn out process to configure all the parameters), backup the current controller configuration and import to the second controller (then change the ip address) or is their an easier way to cause the two controllers to synchronize the configurations?
We are currently running 7.0.240.0 on our active controller and I would rather not upgrade it until we get the new controller online so I can have less downtime and fail AP's between controllers.
What can you recommend?
Jim

I'm assuming then, when I update the software on the controllers I won't be able to choose which controller is primary for an AP anymore and will lose access to the 100 AP licenses (and the capability to have 100 AP's registered, 100 licenses on each Controller).
Read the Deployment Guide. It should mention that you can choose which controller is the "primary" and which one is the "secondary".
If I'm not concerned about quick failover can I still assign a primary and secondary controller for each AP and utilize all 200 AP licenses that are split between the 2 controllers?
You sure can. But this "old school" method is a very expensive method. Why? Because this means that you have two controllers with similar AP licenses. The newer AP SSO means one controller has a full license and the other has only an HA SSO license, which is a lot cheaper.

What is the best backup configuration for a home lab?

Depends on your budget and complexity requirements. Offsite? Redundant? Free or paid? You also don't need a product to backup VM's and you can script this as well. Some good products that are free for a couple VM's are Veeam and Unitrends.

Hi there,
I am currently making a home lab environment to learn Microsoft technologies (at present), I wish to create a file server to store evaluation software, documentation and personal data. I currently use a total of 100GB of hard disk space for all this data...
How often do you recommend me backing up this data using Windows Server 2012 R2?
I also plan on implementing Volume Shadow Copy in the near future...
This topic first appeared in the Spiceworks Community

How to create user for a Domain

Hi
How we can create a User and assign him to a particular domain?
Thanks
BS

Hi,
could you explain more exactly what you want to do? Remember that there is no out of the box way to create a "read only" user or to do "audit" based on a user id.
You edit the users in the EM console in the following path:
Cluster Topology > Application Server: soa.xxx > OC4J: oc4j_soa > Security Providers > Instance Level Security > Users / Groups
Se my post regaring how to create a permission group for a "custom" domain:
http://halfdecentoracle.blogspot.com/2007/02/how-do-i-create-new-user-in-oracle-soa.html
See Chintan Shah's post on creating a servlet filter to "enforce" a read only view into the BPEL console.
http://chintanblog.blogspot.com/2007/12/i-saw-numerous-people-asking-about-bpel_290.html

How to Backup configuration using tftp/ftp in Prime LMS?

Hi
how can i backup ASA/PIX configuration using tftp/ftp in Prime LMS 4.2.2?
--I discovered those devices and can managed them in the LMS but in the config file backup the passwords are encrypted,
that's why i want to backup them with tftp/ftp.
thanks

Wrong service names are set in tnsnames.ora

How is Lync configured for an iPad

Recieving certificate errors when configuring Lync on iPad

if you get an out of warranty replacement from Apple, it starts at $249 and goes up depending on the model.
If you have apple care plus then it's a smaller service fee, I've seen $49 as the fee.
Or you can use a non-authorized repair place but if you use them Apple will basically disown your device and it will no longer be eligible for any warranty work.

How To Backup Mail for Legal Purposes

How do I back up a Mail folder for legal purposes. Is printing out suffecient? These may need to be used in court and I want to make sure I have them saved or printed out properly.
Thanks in advance - Macbook Mom

Welcome to Apple Discussions!
Depending on what type of legal arbitration is being done a printed copy may be sufficient. I would consult with the lawyer you are speaking to what is sufficient. Note, .Mac and IMAP servers are normally storing mail off where you are getting your e-mail from. POP normally stores it locally on your computer depending on your mail preferences. The advantage of the former is that you can take a notebook computer or any computer anywhere and retrieve them. The advantage of the latter is that it is securely in your possession except when it initially arrives at where you are getting e-mail from. Switching from one to the other you have to be very careful not to lose messages, as it may not save the messages from one to the other. Mail offers you the ability to create an "On my Mac" folder in the left hand side of Mail by control-mouse clicking the Inbox and making sure the location is on my Mac. If you store all your messages there, before you migrate from IMAP to POP or vice versa you will be safer. Once that is done, your messages are stored in Home (users -> yourname) -> Library -> Mail folder. Once it is stored there, it can be backed up to CD, DVD, or external hard drive.
If you are using some other mail client than Mac OS X Mail, it will store its messages elsewhere. Let us know if you need to know where Entourage, or Netscape, or some other client stores messages if they are POP or stored locally?

Backup Configuration for 3560 and 3750

Hi guys,
I couldn't make any test yet, but my doubt is about to copy a configuration and paste in the switch 3560 or 3750, the encrypted enable secret its affected in any way?

Hi @edersonpassaura,
You mean that if you paste the "enable secret ..." from one switch to another it will be different in the last switch?
If so, the answer is no. This is because you can specify with the number "0" or "5" if you're going to paste the password as encrypted or non-encrypted. For example:
When you type the "enable secret test" in the CLI, the router will show it up as "enable secret 5 $%lL%&@" when you type the show running-config command, for example. The number "5" in the ouput means that the password is being encrypted using MD5.
If you want to paste that encrypted output into another device you cannot forget the number "5" because this is what tells the devices that the output is being pasted as encrypted. If you paste it without the "5" you have to type "$%lL%&@" to enter the device instead of just "test".
HTH.
Rgrds,
Martin, IT Specialist

How to backup iphone for new computer?

I get a new computer in a few days (pc with vista). Last time i installed windows on my present computer, i cant use the iphone after (only recovery an install all 14gb music new was possible, taked 2 hours...)
This time i want make an backup, so that i can use the iphone on the new computer without installing all stuff new. But i dont know how.
Anybody got an tutorial? (german when its possible, my english *****^^)

You could simply backup your iPhone using iCloud without using you Mac at all. Just go to "Settings > iCloud > Storage & Backup" on your phone and then press Backup Now.

How to backup configuration for a domain?

Similar Messages

Maybe you are looking for