How to backup from Time Machine of a different computer

I want to restore my emails from time machine from a different computer?

Look at the Pondini web site and it should be able to address all of your Time Machine questions.
http://pondini.org/OSX/Setup.html
Ciao.

Similar Messages

  • How do I retrieve files from a backup hard drive (was backed up using Time Machine) on a different computer

    how do I retrieve files from a backup hard drive (was backed up using Time Machine) on a different computer?

    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.

  • After restore backup from time machine, all thumbnails in photos are blank. How to fix ?

    After restore backup from time machine, all thumbnails in photos are blank. How to fix ?
    I'm using Yosemite 10.10.3 and Photos. i have tried repair database, but no success .

    Try these for the first attempt:
    First be sure to have a backup copy of the library if you already don't have one.
    OT

  • HT5097 How to restore from time machine?

    I've backup my Macbook Air Using time machine before reformat it to have window partition.
    However, after installing OS Lion 10.7.4, how do I restore back all my application and data on my last backup from time machine?
    Thks

    See
    http://pondini.org/TM/FAQ.html

  • I recently deleted imovie 9 .and i don't have a cd and i have not made backup from time machine ..i want it back.plz help me..

    i recently deleted imovie 9 .and i don't have a cd and i have not made backup from time machine ..i want it back.plz help me..

    It depends how you installed it.
    If you installed from your iLife 11 DVD, then you can insert the DVD and install it again.
    If you purchased it from the Mac App Store, you can open the Mac App Store, go to the Purchases tab, and reinstall from there.

  • Deleting Backups from Time Machine to Make Room

    Deleting Backups from Time Machine to Make Room
    So, I went into my 1.5 terabyte back-up drive and deleted a number of the TM backups because the drive was getting too full. (I also use that drive to store “permanent” photo files in other folders.)
    Evidently, the computer does not recognize the deletions because the drive shows the same miniscule amount of space as it did prior to the deletions.
    I know people have talked about using “actions” button in the gear icon. However, I can’t find that.
    Any ideas?
    Thanks.
    Tek

    Thanks for the reply, V.K.
    Unfortunately, I deleted via the finder and then emptied the trash. :-}
    I know now, (after the fact) that this was the wrong thing to do. However, I didn’t find a “delete” option within TM.
    It all seemed “logical” at the time. . . and quite frankly, still does. Why the heck is TM so difficult to control? Why can’t one just set it for X number of backups and have an easy to access delete button? (grumble, grumble)
    I looked at the FAQs, but am still not clear on how to find the “action” button. I am using a laptop with no “right click” feature. The mouse is a one piece model.
    My backup drive is directly attached, but, only when I want to backup since I work on a MB pro laptop.
    So please:
    How do I correct this?
    Do I need to format the backup drive and partition? I don’t want/need so many backups cluttering my drive. I need space for permanent photo archives which are very large. These are now merely in a separate folder on the backup drive.

  • I am unable to empty my trash w/o getting an 8003 error.Some  of what is in the trash is BackUp from Time Machine. I have tried to Secure Empty and also Unlocking folders yet the error continues. There is over 300gb that I need to trash. MacPro 10.6.8

    I am unable to empty my trash w/o getting an 8003 error.Some  of what is in the trash is BackUp from Time Machine. I have tried to Secure Empty and also Unlocking folders yet the error continues. There is over 300gb that I need to trash. MacPro 10.6.8

    See #E6 in Time Machine - Troubleshooting.

  • If you remove a backup from Time Machine, can you add it later?

    if you remove a backup from Time Machine, can you add it back later? I have two backup sets active, but only one is connecting to a drive at the moment. It seems to be pausing TM for the inactive one, which is as I would expect, except that the menu icon for TM shows an exclamation point (= "waiting to backup"). I'd rather have that error / pause sign show if the ACTIVE connected drive is experiencing issues. It has zero diagnostic function as currently set up.
    The solution would be to remove the backup drive from the TM list and then add it back later. I am just unsure if I can do this (will TM recognize the alternate backup set again if I re-add it?)
    tx

    Yes, you can re-add it.

  • I upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

    i upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

    Thank you. I followed the faq#14 (using setup wizard from the osx install disk). Everything went just as planned until I woke up this morning and noticed there was no progress on the "transferring documents" meter. It stopped about 1/4 of the way. I can hear the computer working and the bar is somewhat animated like it is advancing but it's not.
    Should I cancel and restart or should I wait it out? It already been about 13 hours since I started the process. Do you think it is my time machine or my iMac? Maybe the time machine file is corrupt or something.
    Anyway, any help is appreciated. Thanks.

  • How do you get time machine to reset your computer to the specific date you would like?

    How do you get time machine to reset your computer to the specific date you would like?

    Hey carlleeh,
    Thanks for the question. The following resource may guide you through that process:
    OS X Mountain Lion: Recover your entire system
    http://support.apple.com/kb/PH11192
    Thanks,
    Matt M.

  • How to exculde the second hard drive backup from time machine of lion os

    My Mac Pro 2010 mid version is using Mac Lion OS, and I have installed three internal hard drives (two 3T hard drives for storage one 2T hard drive for time machine hard drive). When I start to run the time machine to backup the system hard drive, the time machine will include those internal hard drives automatically, and it stop backup and claim time machine is lack of storage space. Of course I know it is not big enough to backup those extra hard drive. However, I just only need to backup the system drive only, but I cannot locate any setting related how to exclude other internal hard drive in time machine. So I still cannot backup my system drive yet.   

    See:
    http://pondini.org/TM/10.html
    10.  Can I exclude things from Time Machine backups?

  • HT203177 how do i clear old backups from time machine to make more space

    My 2TB Time Machine is nearly full.  I am trying to back up a drive in a Mac Min that is starting to fail and wanted to do so on Time Machine.  Unfortunately since my Time Machine is nearly full it will not back up drive without eliminating nearly all of the files on this Mini.  I am okay overwriting the other backups already on the Time Machine but do not know how to force Time Machine to do so.  Please any clues on how to make Time Machine overwrite other backups would be greatly appreciated.

    About TM "Backup Drive is Full" Alert
    TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
    So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
    Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
    Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.
    As you can see Time Machine does prune old backups to make space, but eventually it may no longer succeed. Then you will get the alert. You can delete old backups if you wish, but only using the Time Machine application.

  • How can I restore an old iPhone backup from Time Machine?

    Hi there,
    I lost my iPhone 4S but have a extra iPhone 4 (used for travel) that I would like to restore the 4S backup to.
    The problem is that the backup of my 4S has somehow disappeared from itunes and the only one that shows up is the iPhone 4 backup even though they are set up as different devices with different names. I know that the backup for my 4S is included with my Time Machine backups (on external harddrive) but I can't find the files. Also very strange is that I don't have the folder "MobileSync" in /Library/Application Support/MobileSync on my computer. I can't find that folder anywhere.
    My computer is less that 6 months old and I know that I have not deleted that folder or any other that are preinstalled.
    I'm using OS X 10.9.4 and I don't want to restore my hole computer from Time Machine, just the files that hold my 4S backup.
    Also note that I have not backed up everything from my 4S phone to iClould so that's not an option.
    I've tried everything including:
    - Restoring the settings on the iPhone 4 to factory settings and then connecting to itunes.
    - Deleting itunes and restoring it from Time Machine at a date that i knew had the original iphone backup.
    Who ever can solve this for me deserves a gold medal. I'm truly desperate. I've searched all forums and haven't found a solution for this.
    Thanks.

    caxx wrote:
    Also very strange is that I don't have the folder "MobileSync" in /Library/Application Support/MobileSync on my computer. I can't find that folder anywhere.
    Correct.
    You need to go to ~/Library/Application Support/MobileSync/.
    The ~ indicates your User folder not the top level /Library/ folder.
    Click on the desktop, then hold Option and go to Finder menu Go and Library will be there (only when holding Option as it is hidden).

  • How can I restore an old backup from Time Machine to my iPhone 5?

    I have the iPhone 5 that I had previously transferred my apps and other data to from my iPhone 4. Due to poor battery life, I had to restore the iPhone 5 as a new phone. This helped battery life but now I habve lost my text messages, App data and photos. I use Time Machine on my Mac so whayt do I need to do to get the data back on my phone. I'd like to do this without restoring the phone but rather syncing it with data recovered from Time Machine. I don't want to screw up the battery life again.

    Hi ...
    I've found a solution to my problem.
    Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
    My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
    I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
    Hope this helps.
    BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
    (Thanks goes to Pondini!)

  • After Restoring your computer to Factory Settings How do you restore backups from Time Machine? Help!

    I have Restored my Computer to Factory Settings and Now I'm trying to restore the backups from my Time Matchine. I've already done the Migration Assistant things. But I dont know where to find my details or where my files are.
    Everything is in different spots then where it was when i started this process.
    HELP

    Restoring from Time Machine and using Migration Assistant are either/or options... either restore from a Time Machine backup or restore by using Migration Assitant. You don't write which version of OS X you're running, so it's kind of difficult to tell you where to begin (or start over).
    If you're running Lion or Mountain Lion, I would boot into the Recovery partition (holding down the Command and R keys whilst booting) and use Disk Utility to erase your boot volume. Then, with your TM drive connected, restore your latest backup to your newly formatted volume. You can do the same by using the installation disc that has Snow Leopard on it, just with a few extra steps.
    See http://www.pondini.org/TM/14.html.
    Good luck,
    Clinton

Maybe you are looking for

  • PL/SQL log in java concurrent program is missing

    Hi, I'm experiencing something strange with EBS R12 concurrent program logs. Our concurrent program is just a normal program that runs fine in most cases. It is written in java, which calls PL/SQL procedures. Usually the log is concatenation of logs

  • Iphone is not recognized in My computer but it is able to connect with iTunes

    I couldn't find a way to copy the photo taken by my iphone (saved in camera roll) to my PC. i'm using Window 7, everytime when i plug my iphone device into PC (is a compaq actually) it is able to connect to itunes(as it will actomatically sync) but i

  • Need to skip the variable selection screen when using dropdown

    Hello Friends, I have created a web template having a dropdown, a table and a text element. Basically I am trying to follow the guide "How to Use a Dropdown Box to Set Variable Values". It shows how to select values for a variable using dropdown. NOT

  • How to set up junk mail filtering in mac mail

    Is there a new way to set up junk mail filtering? I have been getting an increased amount of junk mail which the filter seems to allow through. Also, when I select emails and mark them as junk, when I delete them, they "reappear" still marked as junk

  • The redo apply seems not work

    I use Oracle 11g r2 configure a data guard and fast_start fail over (using data guard broker) environment on linux. The standby database only sync the data from the primary if 1. Issue 'alter system switch logfile;' on primary machine. 2. Cancel the