How to backup internal A/V hard drive (not the OS drive) to a 2nd external drive (not the TM drive)?

I'm a new Mac Pro user. Now running OS X Lion. Always used Windows platforms before with Seagate hard drives and their included backup software where I was able to setup different backup schedules to back up various drive and file combos individually/separtely.
Here's what I would like to do on my new Mac Pro:
I have TIme Machine already setup to backup my OS X hard drive (internal #1) to external hard drive #1. that works fine.
I have a 2nd internal hard drive which i only want to use for FInal Cut Pro X media files (video and audio for various projects) and I would like to back that drive up to a different external hard drive.
I do not want to lump these files into the TM backup i have already setup for the OS on ext. drive #1. I want to keep a backup of my Final Cut media on external drive #2.
Any suggestions? How do video professionals usually backup their A/V drives individually and regularly (as I am sure most of you do not store your media on your OS drives).
Thank you!

There are software back up tools like Roxio's Retrospect, though many professionals use RAID systems with redundancy that automatically mirror their main media drive.

Similar Messages

Why do I have 200 GB of "backup" on my main hard drive? Any how can I find and erase them?

I have a MBP that was recently subjected to some liquid damage and taken in for repair. While it was being repaired, I purchased a second MBP. My newest MBP is now my personal laptop, and I'm converting the old one over to a work laptop. In that process, I've upgraded to Lion, and now I'm trying to free up as much hard drive space as possible. I have already deleted all of the music, photos and videos from the hard drive. However, when I go to see how much free space I have left, it shows that I have over 200 GB of "backups" on my main hard drive.
I have never created any backups on this drive. I only used an external HD to do Time Machine backups. How can I locate these backups and delete them in order to free up the hard drive space?

When you open FINDER, is there a folder titled 'backups? If not, have to tried 'search' or 'spotlight' to locate 'backups? By any chance is your disc partitioned?
You state that you have deleted all music, photos and videos from this drive. The graphic that you included in your query shows that these are still on the disc.
The simplest way of achieving your desired result is to open Disk Utility and erase all user data. However that does not tell us what 'backups' is. Pure speculation on my part, but if the disc is partitioned, maybe that is how it is represented on the graphic.
Click on the HDD on your desk top using Command 'I' and see if available space correlates with the the above graphic. If not this suggest a software issue.
If it does, you have to locate 'backups'. As alluded to previously, try SEARCH and SPOTLIGHT. 200GB is hard to hide. Another technique is to open finder and press COMMAND 'J'. Click on 'size' and 'calculate all sizes'. If one of those files is over 200 GB, you have located your culprit.
Better yet wait for someone who knows exactly what the problem is and will give a simple answer. I admit I'm grasping at straws here, but maybe I've at least given a bit of a starting point. Good luck.
Ciao.

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem. How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

Photos in my from my iPhone have same numbering as photos from my dig camera. They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name. Help?

Photos in my from my iPhone have the same numbering as photos from my digital camera. They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name. How do I get them all to save on my ext hard drive and hope do I prevent this numbering overlap in the future? I'm really hoping I don't have to go through and manually rename every single picture. Thanks.

How are you backing up the photos? The best way is to backup the library itself as that will preserve your organizational efforts as well as all metadata like keywords, titles, faces, places, books, etc.
You can use a backup application that does incremental backups. Thus only the first backup is a full one and subsequent backups just copy those files that are new or changed. I use Synk Pro. The lower cost version, Synk, will do the same job. Other similar apps can be found at MacUpdate.com.
OR: upload your camera to a folder on the Desktop. There you can rename the files to something that is more informative than just the file name. I use the date (international format) along with a brief desc: 2007-1-20-adian1stbday-001.jpg. File renaming apps can also be found at MacUpdate.com. Also you can give the folder an informatve name which will become the Event name when you import the folder of photos into iPhoto.
OT

I want to make a TimeMachine backup in a new hard-drive I just bought. It says it has to erase the info but as the drive is new there's no info in it, so what it is going to be erased?

I want to make a TimeMachine backup in a new hard-drive I just bought. It says it has to erase the info but as the drive is new there's no info in it, so what it is going to be erased?
I had to format it after I bought it so that it could work with windows and Mac and I'm afraid that if I erase the info in the hard-drive, the format will also change. Is that possible to happen? Or the format will stay the same?
Thank you

Do you want to continue to use it to share and store files between Windows and NTFS and Mac which uses HFS?
Maybe you need another drive. I would never have only one backup and one "live" data set.
you probably installed something, whether it is current or well supported or not, that came with the drive to allow writing to NTFS.
TimeMachine has to use HFS only and use Apple GPT (GUID) format.
sometimes erase changes a drive to GUID when you click on the raw hard drive name in Disk Utility. other times you can erase a volume and leave the partition format type as is. The wording use to be clearer when people knew when and how to initialize, format and setup a drive. And sometimes a message on the screen says it will be only launches Disk Utility and not to the PARTITION tab to make changes.
In addition to TimeMachine, having a clone of your system or data or both can be very useful as well. Drives fail.
And with a MacBook Air you probably have a smallish internal hard drive and might need to store media files and data on another drive to supplement the internal SSD.

How to back up my mac hard drive to my external hardrive?

How to back up my mac hard drive to my external hard drive?

Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
And, OS X includes Time Machine. See Pondini's Time Machine FAQ and Mac 101- Time Machine

How do i copy all my hard drive files to an USB iBook?

How do i copy all my hard drive files to an USB iBook (with a progrgram (no drag-and-drop everything), so I can change out my hard drive, I have a MacBook Pro. Thanks.

Clone Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Select Disk Utility from the main menu then press the Continue button.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the Lion startup volume.

How do I make a bootable hard drive clone of my main disk in my mac pro?

Hi everyone,
How do I make a bootable hard drive clone of my main disk in my mac pro?
My main drive has bad sectors and I want to replace it.
Thanks in advance

Also your Mac's Disk Utility can make a bootable clone;
http://macs.about.com/od/backupsarchives/ss/diskbackup.htm
Consider though, if your internal HD is failing and defective, then any clone however made, may carry that defect.
Perhaps it would be better to copy your personal data, photos emails etc, to an external drive as well, just in case the clone did not work because of the failing hard drive.

How do I remove one failing hard drive from raid set and replace with new one

Last Friday apparently one of my raid drives started failing.
As I mentioned on this forum I started getting continous beeping.
I was finally able to get the raid working at a degraded level. I ordered a replacement hard drive which is arriving today.
(In the meantime I made twice daily backups of my work.....)
Below was the message I got from the browser based raid software:
Blahblah 09    1000.2GB   RaidSet Member SamSung HD103SJ
Blahblah 10    1000.2GB     Free                 SamSung HD103SJ
Blahblah 11    1000.2GB   RaidSet Member SamSung HD103SJ
Blahblah 12    1000.2GB   RaidSet Member SamSung HD103SJ
(See this earlier thread if you wish!)
http://forums.adobe.com/thread/727867?tstart=0
At one point when I did the checked the browser interface I saw the message Failed and Degraded
As I said, I was able to work over the weekend on the degraded system.
This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
In any case, the new hard drive is arriving today.
What steps should I take to incorporate the new drive into the raid system.
I have one OS drive
and 4 tb raid drives.   One needs to be replaced with the new one that I am getting today.
Thanks
Rowby

Harm,
Regarding your comment:
Re: How do I remove one failing hard drive from raid set and replace with new one
Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
Step 1: Identify bad drive serial number using Areca's tools
Step 2: Turn off the computer
Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
Cheers,
Jim

Restore Windows 7 backup file to portable hard drive

Restore Windows 7 backup file to portable hard drive
I have a full system backup on an NAS - 241 zip files.
The backed up Windows 7 laptop failed irreparably, and I now have a new laptop running 8.1.
I have attempted to create a mounted drive of the old backup - but get a compatibility error from 8.1
I would like to make an accessible copy of the original Win 7 drive on a portable hard drive and access the documents, .pst files, and music files.
Any suggestions very welcome.
Thanks

Hi,
To restore your file from Windows 7, you need to restore these file from Windows 7 system, then choose the feature of system restore to restore these file.
Please refer to the link below for more details about how to restore your file. Especially notice "To restore a backup made on another computer".
http://windows.microsoft.com/en-hk/windows/restore-files-backup#1TC=windows-7
Roger Lu
TechNet Community Support

HT201250 I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/

Had my hard drive replaced and I've restored from TimeMachine backup. I have changed my username and now I can't access my old backups on my TimeMachine hard drive

I've recently had my hard drive replaced in the Apple Store.
I used time machine to backup and after I got my mac back with the new hard drive I restored all my files which are now on my computer and I can access it with no problems.
The problem is that I've changed my username (admin) and when I enter time machine, I can't access the backups of my old hard drive which is really frustrating.
A red negative sign appears on most folders. Also in macintosh HD/users there is a folder named with my old username and I get the same red negative sign in the folders.
Any idea what can be done about this?
If you need more info just ask.
Thanks in advance

Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.

How do I order a new hard drive 655-1402A or 661-6610?

How do I order a new hard drive 655-1402A or 661-6610?

For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC for regular hard drives and SSDs http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here are video instructions on replacing the hard drive on the Aluminum Unibody
http://eshop.macsales.com/installvideos/macbook_13_unibody/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
To transfer your current hard drive I like the free application SuperDuper. It makes a bootable copy of everything on your hard drive http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0

Changed hard drive... How do I transfer from old hard drive to new hard drive

hanged hard drive... How do I transfer from old hard drive to new hard drive.
I have installed the new hardrive on my macbook and reinstalled the software... how do I transfer the information form the old drive to
the new one.
?can I put the old drive in another macbook and connect via firewire???
Thanks

Put the old hardrive in an external hardrive case....like this...
eshop.macsales.com/shop/firewire/on-the-go
.....this is just an example their are less expensive models....

How do I access new second hard drive?

Hi! I am newbie, I am sorry if this a dumb question...
How do I access my second hard drive?
This is what I have:
SparcStation5 170Mhz, 192MB memory.2HDD (one 4.3GB w/ OS, second Hdd 4.3GB)
I had my sparc working with Solaris 8 just perfect!
I added the second hard drive, no problems, I formatted the HDD from withing Solaris OS, (I can probe-scsi from openBoot promt and it showes OK), everything is OK so far, I can see the send hard drive using format, I can partition it and create slices on it, everything seems to be OK, I have no problems making partitions and everything on that Hdd. But when I try 'ls', I can't see anything on that disk, any suggestions? I tried several ways from my manual/book, including mount and it reads 'no acces point on mount' or somthing like that.
this is what I see from format command:
disk 0. (seegate 4.3GB.....) this is my new hard drive (already formated and partioned, I created a new partition /usr with 3.75GB on partition 6. Partition 3 is used by the hdd with a totoal of 4GB . this shows as c0t1d0
disk 1. (SUN4.2GB) this is the hard drive with the OS Solaris 8. this is c0t3d0
Am I missing something?
Thanks!
Murillo

hi there ...
read below--
Find out the address of the drive
STOP+A
At the OK prompt, type probe-scsi. This will list all scsi devices on the system. Find the new drive.
Type boot -r so the OS will see the new drive.
Login as root and type format. Pick the new drive. The drives are listed as c(controller #)t(scsi id or target #)d(disk #). Label drive is required (it will tell you if the drive is not labeled).
Next, type partition. Partition the drive as required (always leave partition 2 as the whole drive as it is informational to the OS
Type print to list the current partitions. When you are done making changes type label
To return to the OS prompt, type quit twice
newfs /dev/dsk/DRIVE-ADDRESS
(ie c0t1d0s0) (controller 0 target(ID) 1 disk 0 slice(partition) 0).
mkdir directory, where directory is the directory you want to mount the drive on
(ie, /disk2)
mount /dev/dsk/DRIVE-ADDRESS directory
Add the new drive to your /etc/vfstab file.
(ie. /dev/dsk/c0t1d0s0 /dev/rdsk/c0t1d0s0 /disk2 ufs 1 yes - )

How to backup internal A/V hard drive (not the OS drive) to a 2nd external drive (not the TM drive)?

Similar Messages

Maybe you are looking for