How to backup Mac mini OS 10.4.5

Hey guys.
I'm having on h3|| of a time trying to find out how I can back up a friends Mac mini with OS 10.4.5 on it. I need to back it up so, I can upgrade it to snow leopard.
I have already tried copying the main HDD to an external drive and, I get an error.
Also, am I able to use time machine on this early of a version? I have done some research on this but, conveniently, Apple seems to be very vague about what OS versions time machine supports or, supplying a full version on line to down load.
So, needless to say, any help at all would be great.
Thanx

Is there a way that I can simply "copy" the hard drive onto an external HDD like one does in windowz?
Lookin for the easiest and, least cost intensive way of doing this.
Or, is there some freeware or, open source apps I can utilize??

Similar Messages

  • How to set mac mini to virtual router

    how to set mac mini to virtual router.

    Hi James,
    It's Internet Sharing you're looking for in System Preferences>Sharing, which can share your connection, say from Ethernet to other computers/devices using Airport/Wifi.

  • How to take Mac Mini 10.5 back to factory setting and reinstallation

    How to take Mac Mini 10.5 back to factory setting and reinstallation.  I have printed off the instructions - followed U tube but still cant get the start up to bring up the recovery menu - anyone please give me ideas.  I have just purchased new Mac Mini Yosemite and want to give the other to my grandaughter - wondered if it had something to do with my keyboard which is a Logitch Classic Keyboard 200 - assistance please.
    many thanks

    thank yo so much Niel - I do still have the original DVD's and tried restarting whilst holding down the C key - I assumed the windows key is the option one on the logitech keyboard  - will give it another go - many thanks. 

  • How to make Mac Mini (Early 2009) sleep in Lion?

    After upgrading to Lion, my Mac Mini (Early 2009) stopped going to sleep from the Apple menu or from the keyboard. The problem has persisted with all point releases of Lion. The computer went to sleep with the same peripherals just fine under Snow Leopard.
    The display goes to sleep but the computer itself neither suspends nor hibernates. The power light is lit and doesn't pulsate. Measuring how many watts the device draws from the power socket shows that it's not sleeping. It wakes up so quickly that it must be only the display sleeping.
    Console log shows nothing when trying to sleep.
    Changing the hibernate mode from the default 3 to 25 makes no difference. Running the PleaseSleep app make no difference.
    How to put Mac Mini (Early 2009) to sleep (preferably hibernation--not just suspension) under Lion?

    Hello,
    Open console in Applications>Utilities, check the system log for the date/time of the last problem  & the Startup right after that for clues.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • How to backup mac os x using time machine

    how to backup mac os x using time machine

    yes.presently my mac is running but it is too slow. i want to upgrade to yosemite can i upgrade to it directly from 10.9 without upgrading to 10.9.5.
    And another problem is, if  i upgrade anything it asks me to restart and when i does that it stucks at loading and my os is crashing.pls help me out .
    pls tell me how to back up my os x with time machine and how to restore that os using time machine if my mac gets  crashed.

  • How to run: Mac Mini + Leopard + 1080p ?

    Can someone tell me on how to run Mac Mini + Leopard + 1080p? I tried running SwitchRex X 3.7.10 and I was not able to make it work. I read DisplayConfigX may work. Thanks.

    Hello, see how many of these you can answer...
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Console in Applications>Utilities & see if there are any clues or repeating messages when this happens.
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much free RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab of Activity Monitor, are there a lot of Pageouts?

  • How to use Mac Mini Server as NAT with only one port??

    How to use Mac Mini Server as NAT with only one ethernet port??

    But why did apple sell me this server that does NAT with one port? I don't get it.

  • How to connect Mac Mini with LG 19LS4D LCD TV?

    Hi all,
    I just purchased my Mac Mini and tried connecting to my LG 19" HD TV using the supplied DVI to VGA adapter. When I first booted the machine "No signal" was displayed on my TV. I plugged in another 15" monitor and played around with resolutions and cable swapping and it works at 1024 x 768 at 60Hz (not ideal but better than nothing). Everytime I turn off the Mac Mini or it goes to sleep the resolution is reset and "No signal" appears again.
    I have tried connecting via VNC to play around with the settings remotely but this has no effect on my TV monitor and is only resolved by the solution above or by leaving my Mac awake and not sleeping.
    The documentation for the TV says that all the resolutions I have tried, and more are supported and Detect Displays under System Preferences shows these but defaults to a resolution that produces a "No signal" box.
    Any ideas would be greatly welcomed.
    Thanks in advance

    Hi BSteely,
    Thanks for the reply. To answer your questions, the LG shows on the mini as it should do i.e. there is a specific code (the LG model number) and lists the resolutions and refresh rates listed in the manual. Adobe Photoshop complains of a bad colour profile but I think that was only because when the LG is finally lit up it is as a result of me connecting the 15" monitor then hot swapping before OS X has change to realise.
    When using VNC with the LG attached 1024 x 768 at 60Hz is shown but selecting that does not show the screen on the LG.
    I did install SwitchResX from looking at other forums but was unable to save a usable state as the profile and resolutions were from a different monitor effectively despite my LG being connected. The P&D file that it gave back is listed in full below although I suspect this is for my 15"monitor (Excuse the length but I am unsure as to which bits are most useful).
    The LG manual lists 1440 x 900 at 60Hz as the native default however the mini fails to recognise this. The easiest resolution I can get after hot swapping monitors is 1024 x 768 at 60Hz although the other day (not sure how) I did get 1280 x 1024 (at 60Hz?). The LG does not however have a DVI port. It does have HDMI so a DVI to HDMI cable could work but without buying a cable I don't know.
    Here is the LG's information file:
    DDC block report generated by SwitchResX version 3.8.4 for display
    VGA/SVGA Display
    ------------------- RAW DATA ------------------------
    0 1 2 3 4 5 6 7 8 9 A B C D E F
    0 | 00 FF FF FF FF FF FF 00 09 AD 38 02 BD E7 00 00
    1 | 30 0B 01 01 08 1E 18 64 E8 17 26 A0 61 58 9A 2E
    2 | 27 54 39 AD CE 00 01 01 01 01 01 01 01 01 01 01
    3 | 01 01 01 01 01 01 C3 1E 00 20 41 00 20 30 10 60
    4 | 13 00 1E 16 00 00 00 1E 64 19 00 40 41 00 26 30
    5 | 18 88 36 00 1E 16 00 00 00 18 00 00 00 FD 00 3C
    6 | 4B 1F 3C 08 00 0A 20 20 20 20 20 20 00 00 00 FE
    7 | 00 46 58 57 4A 31 42 30 32 35 39 33 32 35 00 66
    < 00FFFFFF FFFFFF00 09AD3802 BDE70000 300B0101 081E1864 E81726A0 61589A2E 275439AD CE000101 01010101 01010101 01010101 0101C31E 00204100 20301060 13001E16 0000001E 64190040 41002630 18883600 1E160000 00180000 00FD003C 4B1F3C08 000A2020 20202020 000000FE 00465857 4A314230 32353933 32350066 >
    Valid EDID block: checksum passed
    ------------------- MAIN EDID BLOCK -----------------
    EDID Version........1.1
    Manufacturer........BMM
    Product Code........14338 (3802) (0238)
    Serial Number.......0000E7BD
    Manufactured........Week 48 of year 2001
    Max H Size..........30 cm
    Max V Size..........24 cm
    Gamma...............2.00
    Display Supported Features:
    Power Management: Active off Power Management: Suspend Power Management: Standby
    Display type:
    RGB color display
    Display is non continuous frequency
    Default color space is not sRGB standard
    Input signal & sync:
    Analog input with: 0.700V / 0.300V
    Composite Sync
    Color info:
    Red x = 0.625 Green x = 0.345 Blue x = 0.180 White x = 0.329
    Red y = 0.380 Green y = 0.604 Blue y = 0.154 White y = 0.225
    Established Timings:
    720 x 400 @ 70Hz
    640 x 480 @ 60Hz
    640 x 480 @ 72Hz
    640 x 480 @ 75Hz
    800 x 600 @ 60Hz
    800 x 600 @ 72Hz
    800 x 600 @ 75Hz
    1024 x 768 @ 60Hz
    1024 x 768 @ 70Hz
    1024 x 768 @ 75Hz
    Manufacturer Reserved Timings:
    Standard Timing Identification:
    Monitor Description blocks:
    Descriptor #0 is Timing definition:
    Mode = 1024 x 768 @ 75.029Hz
    Pixel Clock............. 78.75 MHz Non-Interlaced
    Horizontal Vertical
    Active.................. 1024 pixels 768 lines
    Front Porch............. 16 pixels 1 lines
    Sync Width.............. 96 pixels 3 lines
    Back Porch.............. 176 pixels 28 lines
    Blanking................ 288 pixels 32 lines
    Total................... 1312 pixels 800 lines
    Scan Rate............... 60.023 kHz 75.029 Hz
    Image Size.............. 30 mm 22 mm
    Border.................. 0 pixels 0 lines
    Sync: Digital separate with
    * Positive vertical polarity
    * Positive horizontal polarity
    Descriptor #1 is Timing definition:
    Mode = 1024 x 768 @ 60.004Hz
    Pixel Clock............. 65.00 MHz Non-Interlaced
    Horizontal Vertical
    Active.................. 1024 pixels 768 lines
    Front Porch............. 24 pixels 3 lines
    Sync Width.............. 136 pixels 6 lines
    Back Porch.............. 160 pixels 29 lines
    Blanking................ 320 pixels 38 lines
    Total................... 1344 pixels 806 lines
    Scan Rate............... 48.363 kHz 60.004 Hz
    Image Size.............. 30 mm 22 mm
    Border.................. 0 pixels 0 lines
    Sync: Digital separate with
    * Negative vertical polarity
    * Negative horizontal polarity
    Descriptor #2 is Monitor limits:
    Horizontal frequency range.......31-60 kHz
    Vertical frequency range.........60-75 Hz
    Maximum bandwidth unspecified
    Descriptor #3 is ASCII data:
    FXWJ1B0259325

  • How to buy mac mini from USA

    HI, there, I want to buy a Mac mini from USA but I'm in New Zealand. The price here is so crazy!!! Is it possible to order one from apple store in USA and ask them to post it? How to do that? Cheers

    There are some things to know about buying things in the US. The prices do not include sales taxes. There is no standard federal sales tax, it differs from state to state and large city to large city and can be between 6 to 10+%.
    If you buy from Apple you will always pay sales tax. If you find an online 3rd party Apple reseller, you may pay as much as US$20 to 30 less for the product, but many also do not charge sales tax and if you buy enough, offer free shipping within the US. I have friends in Dallas, so I buy things in the US there. For example, if I had purchased my Mac mini from an Apple Store in Dallas it would have been US$499 plus US$41.00 sales tax (8.25%). (It would have been the same cost from Apple Online, but sometimes they charge for shipping, sometimes they do not.) However, I ordered it from Other World Computing for US$479.00 with no sales tax and free shipping to Dallas. So I saved US$61.00.
    However, as mentioned, shipping to NZ and paying customs' duty fees may not save you anything over buying it there.

  • How does the mac mini perform with cs5

    Just curious
    How does the Intel HD Graphics 4000 in the new mac mini perform with cs5 photoshop  cs6 photoshop?
    thanks
    Ted

    Jeff, I appreciate your comment, so you haven't had any problem with using the painttools in CS 6 photoshop and the 3d type etc, in other words all the features that CS6 photoshop has.
    I was thinking about buying the mac mini but was concerned how it works with CS 5 (which I have) I will have to take another look at the MiniMac server with the 3000 card. I do a lot of Digital Painting primarily Painter 12.2 but and would like to use the Painter brushes in CS 5 ( have not upgraded to CS 6.) My Imac is 6 years old and really is not fast enough.
    Thanks for replying
    Ted

  • "Start Idle Timer Stopped" How to boot Mac Mini?

    I was following Apple's procedure to setup Boot Camp - I had partitioned the drive on my Mac Mini, installed Mac OS X 10.4 and was setting about the upgrade it to Leopard, when it crashed with the prompt:
    localhost:/root# CSRHIDTransitionDriver::stop
    IOBluetoothHCIController::Start Idle Timer Stopped
    No mater if I started by resetting the parameter RAM, Safe boot (Shift Key), Option key, or from the System DVD (C Key), it came up withe the same message. It is a command prompt - and I can do a "reboot" command (with the same result). I did a "/sbin/fsk -fy" and the disk checked out okay.
    Any ideas on what I might do to get this thing going again? How can I get it to actually boot, either from the hard drive or the system DVD?

    I also reset the System Management Controller:
    http://docs.info.apple.com/article.html?artnum=303446
    ...and tried booting diagnostics (D Key), both also to no avail.

  • How to use Mac Mini Server as media server

    I recently purchased a Mac Mini Server and want to make it my media center accessed by my TV.
    This is what I have on my network:
    1x Mac Book Pro
    3x Mac Books
    4x iPhones (2x iPhone 4, 2x iPhone 3Gs)
    1x iPad
    1x 1TB external Drive
    1x Time Capsule 500 Gig
    I want to figure out a way to easily put all the Video/Photos and Music onto the Mac Mini Server from all phones, computers and iPad.  I then want to be able to watch them from my TV.
    I then want all the devices to be able to see the videos/photos from them in real time if needed.
    Does anyone know how to accomplish this?
    Thanks,
    Darren

    iCloud when available later this year will help a lot. However in the mean time the only option is to either
    sync all the iPhones/iPads to their computers
    copy all the libraries on to your Mac mini and then import them in to the master library
    login via file sharing to each computer and then import them in to the master library
    use FireWire Target Disk mode and import them in to the master library

  • How to use Mac Mini as web hosting server?

    Hi,
    I would like to use my mac mini as a web hosting server.
    I have a few domains that I want to host on my mac mini.
    How do I configure/setup the mac mini?
    Best,
    Leo

    yes, a little. it's nice for people not used to setting up from source or doing tons of stuff in the command line. it installs like any other mac application & puts a nice control pane in system preferences. plus, you can set up for updates to keep everything current with patches.
    I'm not sure how to handle the multiple domains, but whatever you find on apache that covers this should also or mostly apply to you too.

  • How to backup Mac Lion over the network

    I have a client who asked me to set up a Lion email server for 20 users.  It is running open directory for the user accounts and has a wiki set up on it as well.  I have been researching  backup solutions for it.  The server runs in a remote data center environment and it is the only mac on the network.  There are other Linux and windows machines on the same network as well.  I would like a backup solution for the email  and open directory database that doesn't require stopping the email service (if possible), and I would like to back up over the network (if possible). 
    What would be the best way to back up this server considering it needs to be in service 24/7?  I am open to both free and commercial solutions.  Any thoughts or comments would be very much appreciated.

    As the server is in a (remote) data center the first more normal approach for backing up over the network would require you to have access to a second computer in the same data center this would require additional hosting costs.
    The next (network) approach would involve backing up from the server in the data center over the Internet to perhaps a machine at your own office, or another site, or a third option to use a commercial Internet based backup service.
    Internet backup services include the following and I am sure plenty of others -
    Mozy - http://mozy.com/
    Backblaze - http://www.backblaze.com/
    Carbonite - http://www.carbonite.co.uk/
    Crashplan - http://www.crashplan.com/
    iDrive Pro - http://www.idrive.com/index.html
    Livedrive - http://www.livedrive.com/
    If your backing up to your own Mac over the Internet you will need to setup a VPN link. You could in theory as one possible example, have the Mac mini in the data center also act as a VPN server so you can fully access it, then mount the volumes over AFP, then use any standard backup tool to copy that to a local volume. Retrospect would be able to do this as one example. Another way is rather than using AFP, use FTP to download everything. However unless you protect FTP behind a VPN it is these days considered very insecure.
    Another approach is to use Rsync which is designed original for Unix/Linux for this exact purpose but like all Linux originated software is far from friendly. See http://www.rsync.net/resources/howto/mac_rsync.html

  • How to repartition mac mini lion server 10.7.5.

    Purchased Mac Mini Server OS X 10.6 in 2010.  Upgraded to OS X 10.7.5 Server Lion.  This was my first time purchasing any kind of server.  On setup I split the hard drive in half and didn't realize my mistake until the first half of the hard drive (about 500 GB) became full over the years.  The second half (about 500 GB) is empty.  I currenty have a time capsule making back ups. 
    How can I combine both halfs togther to tap into the unused 500 GB?

    Iwas able to fix this issue by going to the Audio Midi setup paneal and changing to 48K bit rate.Works fine now....

Maybe you are looking for

  • I cant activate my iphone 3gs after upgrade to 5.1.1

    i cant activate my iphone 3gs after upgrade to 5.1.1

  • Purchasing Report help

    Hi, I need to create a report from EKKO,EKPO,KOMV,MSEG & LIFNR table....I found the related data sources as 2LIS_02_ITM, 2LIS_11_VAKON /2LIS_13_VDKON, 2LIS_03_BF & 0VENDOR_ATTR. Now my doubt is what are the key fields I should take to consolidate the

  • N82 does not correctly process DHCP leases

    I have no problem attaching my new N82 to my, and friends, home wireless networks. However, it fails to connect to the Univeristy Campus network giving the error: "Web: No gateway reply!" This is because the phone doesn't correctly process DHCP lease

  • Creating a Brochure + Help Needed

    Hello Everyone, I am seeking help in trying to make a brochure.  As you see in the photos i am trying to make a brochure that has slots  and pockets, where you can place other pamphlets, also be able to place  cards (e.g. business cards) using little

  • INVALID PARAM VERB: SECURESAVEDA

    Hi,   I am experiencing 'Exception condition "INVALID PARAM VERB: SECURESAVEDA" raised' after using SE38 with program RSO_BC_FILES_IN_BDS. In the ABAP runtime error, it also says Termination occurred in the ABAP program "SAPLOLEA" - in "AC_FLUSH_CALL